arXiv subjects

Yohei Kobayashi

Publications and source records attributed to Yohei Kobayashi.

15 recordsLinked to original sources

arXiv2025

Composition-dependent ultrafast luminescence in Cu-Ni alloys: Combined experimental and ab initio study

Properties of Cu-Ni solid solutions have long been studied in physical and materials sciences. Yet, their many-body properties have not been well understood. Here, we investigate ultrafast luminescence in near infrared region for Cu$_{1-x}$Ni$_x$ alloys. The luminescence intensity was the highest in Cu and decreased dramatically by adding Ni, approaching close to the value for pure Ni at $x=0.45$. This composition dependence was well reproduced by calculations assuming two body scattering of the energetic electrons. The luminescent decay rate was not straightforward, i.e., it decreased first by adding Ni up to $x=0.17$ and then started to increase approaching twice the initial value at $x=0.45$. This behavior was in good agreement with ab initio calculations of electron-phonon (e-ph) coupling strength. This work provides a new perspective on the electron relaxation dynamics in solid solutions systems.

cond-mat.mtrl-sci↗

arXiv2024

Anomalous Hall transport by optically injected isospin degree of freedom in Dirac semimetal thin film

Chirality of massless fermions emergent in condensed matter is a key to understand their characteristic behavior as well as to exploit their functionality. However, chiral nature of massless fermions in Dirac semimetals has remained elusive, due to equivalent occupation of carriers with the opposite chirality in thermal equilibrium. Here, we show that the isospin degree of freedom, which labels the chirality of massless carriers from a crystallographic point of view, can be injected by circularly polarized light. Terahertz Faraday rotation spectroscopy successfully detects the anomalous Hall conductivity by a light-induced isospin polarization in a three-dimensional Dirac semimetal, Cd$_3$As$_2$. Spectral analysis of the Hall conductivity reveals a long scattering time and a long decay time, which are characteristic of the isospin. The long-lived, robust, and reversible character of the isospin promises potential application of Dirac semimetals in future information technology.

cond-mat.mes-hall↗

arXiv2023

Disentangling the Competing Mechanisms of Light-Induced Anomalous Hall Conductivity in Three-Dimensional Dirac Semimetal

We experimentally elucidate the origin of the anomalous Hall conductivity in a three-dimensional Dirac semimetal, Cd$_3$As$_2$, driven by circularly polarized light. Using time-resolved terahertz Faraday rotation spectroscopy, we determine the transient Hall conductivity spectrum with special attention to its sign. Our results clearly show the dominance of direct photocurrent generation assisted by the terahertz electric field. The contribution from the Floquet-Weyl nodes is found to be minor when the driving light is in resonance with interband transitions. We develop a generally applicable classification of microscopic mechanisms of light-induced anomalous Hall conductivity.

cond-mat.mtrl-sci↗

arXiv2023

Spin-polarized saddle points in the topological surface states of the elemental Bismuth revealed by a pump-probe spin-resolved ARPES

We use a pump-probe, spin-, and angle-resolved photoemission spectroscopy (ARPES) with a 10.7 eV laser accessible up to the Brillouin zone edge, and reveal for the first time the entire band structure, including the unoccupied side, for the elemental bismuth (Bi) with the spin-polarized surface states. Our data identify Bi as in a strong topological insulator phase ($Z_2$=1) against the prediction of most band calculations. We unveil that the unoccupied topological surface states possess spin-polarized saddle points yielding the van Hove singularity, providing an excellent platform for the future development of opto-spintronics.

cond-mat.mtrl-sci↗

arXiv2023

Mechanism of femtosecond laser ablation revealed by THz emission spectroscopy

We investigated femtosecond laser ablation dynamics using THz time-domain spectroscopy. To clarify the breakdown dynamics of materials, we focused on the motion of charged particles and measured the terahertz waves emitted during laser ablation. We revealed that the Coulomb force dominated the ablation process. Furthermore, comparisons of the experimental results with theoretical models showed that material breakdown occurs within a few hundred femtoseconds. Our experimental results indicate that electrostatic ablation is the most likely ablation mechanism for metals.

physics.optics↗

arXiv2023

Jitter correction for asynchronous optical sampling terahertz spectroscopy using free-running pulsed lasers

We demonstrate a jitter correction method for asynchronous optical sampling (ASOPS) terahertz (THz) time-domain spectroscopy using two free-running oscillators. This method simultaneously records the THz waveform and a harmonic of the laser repetition rate difference, to monitor the jitter information for software jitter correction. By suppressing the residual jitter below 0.1 ps, the accumulation of the THz waveform is achieved without losing the measurement bandwidth. Our measurement of water vapor successfully resolves the absorption linewidths below 1 GHz, demonstrating a robust ASOPS with a flexible, simple, and compact setup without any feedback control or additional continuous-wave THz source.

physics.optics↗

arXiv2022

Stimulated Rayleigh Scattering Enhanced by a Longitudinal Plasma Mode in a Periodically Driven Dirac Semimetal Cd$_3$As$_2$

Using broadband (12-45 THz) multi-terahertz spectroscopy, we show that stimulated Rayleigh scattering dominates the transient optical conductivity of cadmium arsenide, a Dirac semimetal, under an optical driving field at 30 THz. The characteristic dispersive lineshape with net optical gain is accounted for by optical transitions between light-induced Floquet subbands, strikingly enhanced by the longitudinal plasma mode. Stimulated Rayleigh scattering with an unprecedentedly large refractive index change may pave the way for slow light generation in conductive solids at room temperature.

cond-mat.mtrl-sci↗

arXiv2021

Effect of the sample work function on alkali metal dosing induced electronic structure change

Alkali metal dosing (AMD) has been widely used as a way to control doping without chemical substitution. This technique, in combination with angle resolved photoemission spectroscopy (ARPES), often provides an opportunity to observe unexpected phenomena. However, the amount of transferred charge and the corresponding change in the electronic structure vary significantly depending on the material. Here, we report study on the correlation between the sample work function and alkali metal induced electronic structure change for three iron-based superconductors: FeSe, Ba(Fe$_{0.94}$Co$_{0.06}$)$_{2}$As$_{2}$ and NaFeAs which share a similar Fermi surface topology. Electronic structure change upon monolayer of alkali metal dosing and the sample work function were measured by ARPES. Our results show that the degree of electronic structure change is proportional to the difference between the work function of the sample and Mulliken's absolute electronegativity of the dosed alkali metal. This finding provides a possible way to estimate the AMD induced electronic structure change.

cond-mat.str-el↗

arXiv2020

Neural-network-assisted in situ processing monitoring by speckle pattern observation

We propose a method to monitor the progress of laser processing using laser speckle patterns. Laser grooving and percussion drilling were performed using femtosecond laser pulses. The speckle patterns from a processing point were monitored with a high-speed camera and analyzed with a deep neural network. The deep neural network enabled us to extract multiple information from the speckle pattern without a need for analytical formulation. The trained neural network was able to predict the ablation depth with an uncertainty of 2 \micron, as well as the material under processing, which will be useful for composite material processing.

eess.IV↗

arXiv2020

Coherent control of acoustic phonons in a silica fiber using a multi-GHz optical frequency comb

Multi-gigahertz mechanical vibrations stemming from interactions between light fields and matter, also known as acoustic phonons, have long been a subject of study. In recent years, specially designed functional devices have been developed to enhance the light-matter interaction strength, since the excitation of acoustic phonons by a continuous wave laser alone is insufficient. However, with such structure-dependent enhancements, the strength of the interaction cannot be aptly and instantly controlled. We propose a new technique to control the effective interaction strength, which is not via the material structure in the spatial domain, as with the above-mentioned specially designed functional devices, but through the structure of light in the time domain. Here we show the effective excitation and coherent control of acoustic phonons in a single-mode fiber using an optical frequency comb by tailoring the optical pulse train. We believe this work represents an important step towards "comb-matter interactions."

physics.optics↗

arXiv2017

100 MHz high-speed strain monitor using fiber Bragg grating and optical filter applied for magnetostriction measurements of cobaltite at magnetic fields beyond 100 T

High-speed 100 MHz strain monitor using fiber Bragg grating (FBG) and an optical filter has been devised for the magnetostriction measurements under ultrahigh magnetic fields. The longitudinal magnetostriction of LaCoO$_{3}$ has been measured at room temperature, 115, 7 and 4.2 K up to the maximum magnetic field of 150 T. The field-induced lattice elongations are observed, which are attributed to the spin-state crossover from the low-spin ground state to excited spin-states.

cond-mat.mtrl-sci↗

arXiv2017

High-speed 100 MHz strain monitor using fiber Bragg grating and optical filter for magnetostriction measurements under ultrahigh magnetic fields

A high-speed 100 MHz strain monitor using a fiber Bragg grating, an optical filter, and a mode-locked optical fiber laser has been devised, which has a resolution of $ΔL/L\sim10^{-4}$. The strain monitor is sufficiently fast and robust for the magnetostriction measurements of magnetic materials under ultrahigh magnetic fields generated with destructive pulse magnets, where the sweep rate is in the range of 10-100 T/$μ$s. As a working example, the magnetostriction of LaCoO$_{3}$ was measured at room temperature, 115 K, and 7$\sim$4.2 K up to a maximum magnetic field of 150 T. The smooth $B^{2}$ dependence and the first-order transition were observed at 115 K and 7$\sim$4.2 K, respectively, reflecting the field-induced spin-state evolution.

cond-mat.mtrl-sci↗

arXiv2015

A bidirectional dual-comb ring laser for simple and robust dual-comb spectroscopy

Fourier-transform spectroscopy is an indispensable tool for analyzing chemical samples in scientific research as well as chemical and pharmaceutical industries. Recently, its measurement speed, sensitivity, and precision have been shown to be significantly enhanced by using dual frequency combs. However, wide acceptance of this technique is hindered by its requirement for two frequency combs and active stabilization of the combs. Here we overcome this predicament with a Kerr-lens mode-locked bidirectional ring laser that generates two frequency combs with slightly different pulse repetition rates and a tunable yet highly stable rate difference. This peculiar lasing principle builds on a slight difference in optical cavity length between two counter-propagating lasing modes due to Kerr lensing. Since these combs are produced by the one and same laser cavity, their relative coherence stays passively stable without the need for active stabilization. To show its utility, we demonstrate broadband dual-comb spectroscopy with the single laser.

physics.optics↗

arXiv2011

The Impact of Dispersion on Amplitude and Frequency Noise in a Yb-fiber Laser Comb

We describe a Yb-fiber based laser comb, with a focus on the relationship between net-cavity dispersion and the frequency noise on the comb. While tuning the net cavity dispersion from anomalous to normal, we measure the amplitude noise (RIN), offset frequency (f_CEO) linewidth, and the resulting frequency noise spectrum on f_CEO. We find that the laser operating at zero net-cavity dispersion has many advantages, including an approximately 100x reduction in free-running f_CEO linewidth and frequency noise power spectral density between laser operation at normal and zero dispersion. In this latter regime, we demonstrate a phase-locked f_CEO beat with low residual noise.

physics.optics↗

arXiv2009

Cavity-enhanced dual-comb spectroscopy

The sensitivity of molecular fingerprinting is dramatically improved when placing the absorbing sample in a high-finesse optical cavity, thanks to the large increase of the effective path-length. As demonstrated recently, when the equidistant lines from a laser frequency comb are simultaneously injected into the cavity over a large spectral range, multiple trace-gases may be identified within a few milliseconds. Analyzing efficiently the light transmitted through the cavity however still remains challenging. Here, a novel approach, cavity-enhanced frequency comb Fourier transform spectroscopy, fully overcomes this difficulty and measures ultrasensitive, broad-bandwidth, high-resolution spectra within a few tens of $μ$s. It could be implemented from the Terahertz to the ultraviolet regions without any need for detector arrays. We recorded, within 18 $μ$s, spectra of the 1.0 $μ$m overtone bands of ammonia spanning 20 nm with 4.5 GHz resolution and a noise-equivalent-absorption at one-second-averaging per spectral element of 3 10^-12 cm^-1Hz^-1/2, thus opening a route to time-resolved spectroscopy of rapidly-evolving single-events.

physics.optics↗