arXiv subjects

Yong Jin Daniel Kim

Publications and source records attributed to Yong Jin Daniel Kim.

5 recordsLinked to original sources

arXiv2026

ETSI ISG MAT: Bridging Multiple Access Techniques Research and 6G Standardisation

Improved spectral efficiency and inter-user interference mitigation are important aspects of IMT-2030 and the ongoing 3GPP 6G study. ETSI established the Industry Specification Group on Multiple Access Techniques (ISG MAT) as a research and pre-standardisation activity to build wider consensus on downlink MAT for 3GPP-based 6G systems. Its first report, ETSI GR MAT 001 V1.1.1, provides a standards-oriented comparison of 3GPP-specified techniques, including OMA, MU-MIMO, and MUST, with candidate techniques comprising power-domain NOMA, RSMA, and cache-aided MU-MIMO. The report identifies operating conditions in which candidate MAT can improve spectral efficiency and assesses implications for transceiver processing, network assistance information, and reference-signal requirements. Ongoing work includes realistic 5G NR link-level evaluations and the study of MAT for non-terrestrial networks, providing timely technical evidence for 3GPP 6G standardisation discussions.

eess.SP↗

arXiv2026

Faster-than-Nyquist Signaling in the Finite Time-Bandwidth Product Regime

This paper analyzes faster-than-Nyquist (FTN) signaling within a consistent framework based on a fixed time-bandwidth product (TBP), resolving potential ambiguities present in finite blocklength analysis. A key feature of FTN is its ability to increase the number of transmitted symbols in a given time and frequency resource, which can lower the rate penalties inherent in short packet communications. We derive tight bounds on the maximum channel coding rate (MCCR) and demonstrate that FTN's rate gains over Nyquist signaling can be higher in the finite TBP regime than in the asymptotic case. Performance is benchmarked against the theoretical optimum of transmitting prolate spheroidal wave functions, showing that a well-designed FTN system can closely approach this limit. We present practical design criteria, including the optimal time-acceleration factor for maximizing signaling dimensions, an optimized pulse shape that meets strict out-of-band constraints, and a turbo-equalization-based coding scheme that performs near the derived MCCR bounds. These findings establish FTN as a practical and near-optimal technique for enhancing the rate and reliability of latency-constrained communications.

cs.IT↗

arXiv2025

Rate-Splitting Multiple Access for 6G: Prototypes, Experimental Results and Link/System level Simulations

Rate-Splitting Multiple Access (RSMA) is a powerful and versatile physical layer multiple access technique that generalizes and has better interference management capabilities than 5G-based Space Division Multiple Access (SDMA). It is also a rapidly maturing technology, all of which makes it a natural successor to SDMA in 6G. In this article, we describe RSMA's suitability for 6G by presenting: i) link and system level simulations of RSMA's performance gains over SDMA in realistic environments, and (ii) pioneering experimental results that demonstrate RSMA's gains over SDMA for key use cases like enhanced Mobile Broadband (eMBb), and Integrated Sensing and Communications (ISAC). We also comment on the status of standardization activities for RSMA.

eess.SP↗

arXiv2023

Multicast and Unicast Superposition Transmission in MIMO OFDMA Systems with Statistical CSIT

We consider a downlink multicast and unicast superposition transmission in multi-layer Multiple-Input Multiple-Output (MIMO) Orthogonal Frequency Division Multiple Access (OFDMA) systems when only the statistical channel state information is available at the transmitter (CSIT). Multiple users can be scheduled by using the time/frequency resources in OFDMA, while for each scheduled user MIMO spatial multiplexing is used to transmit multiple information layers, i.e., single user (SU)-MIMO. The users only need to feedback to the base-station the rank-indicator and the long-term average channel signal-to-noise ratio to indicate a suitable number of transmission layers, a suitable modulation and coding scheme and allow the base-station to perform user scheduling. This approach is especially relevant for the delivery of common (e.g., popular live event) and independent (e.g., user personalized) content to a high number of users in deployments in the lower frequency bands operating in Frequency-Division-Duplex (FDD) mode, e.g., sub-1 GHz. We show that the optimal resource allocation that maximizes the ergodic sum-rate involves greedy user selection per OFDM subchannel and superposition transmission of one multicast signal across all subchannels and single unicast signal per subchannel. Degree-of-freedom (DoF) analysis shows that while the lack of instantaneous CSI limits DoF of unicast messages to the minimum number of transmit antennas and receiver antennas, the multicast message obtains full DoF that increases linearly with the number of users. We present resource allocation algorithms consisting of user selection and power allocation between multicast and unicast signals in each OFDM subchannel. System level simulations in 5G rural macro-cell scenarios show overall network throughput gains in realistic network environments by superposition transmission of multicast and unicast signals.

cs.IT↗

arXiv2019

Two-Layered Superposition of Broadcast/Multicast and Unicast Signals in Multiuser OFDMA Systems

We study optimal delivery strategies of one common and $K$ independent messages from a source to multiple users in wireless environments. In particular, two-layered superposition of broadcast/multicast and unicast signals is considered in a downlink multiuser OFDMA system. In the literature and industry, the two-layer superposition is often considered as a pragmatic approach to make a compromise between the simple but suboptimal orthogonal multiplexing (OM) and the optimal but complex fully-layered non-orthogonal multiplexing. In this work, we show that only two-layers are necessary to achieve the maximum sum-rate when the common message has higher priority than the $K$ individual unicast messages, and OM cannot be sum-rate optimal in general. We develop an algorithm that finds the optimal power allocation over the two-layers and across the OFDMA radio resources in static channels and a class of fading channels. Two main use-cases are considered: i) Multicast and unicast multiplexing when $K$ users with uplink capabilities request both common and independent messages, and ii) broadcast and unicast multiplexing when the common message targets receive-only devices and $K$ users with uplink capabilities additionally request independent messages. Finally, we develop a transceiver design for broadcast/multicast and unicast superposition transmission based on LTE-A-Pro physical layer and show with numerical evaluations in mobile environments with multipath propagation that the capacity improvements can be translated into significant practical performance gains compared to the orthogonal schemes in the 3GPP specifications. We also analyze the impact of real channel estimation and show that significant gains in terms of spectral efficiency or coverage area are still available even with estimation errors and imperfect interference cancellation for the two-layered superposition system.

cs.IT↗