arXiv subjects

Yonghua Ding

Publications and source records attributed to Yonghua Ding.

16 recordsLinked to original sources

arXiv2026

Effect of externally applied resonant magnetic perturbations on resistive tearing modes

Static resonant magnetic perturbations (RMPs) generated by saddle coil current have been applied in J-TEXT tokamak experiments in order to study their effects on tearing mode instabilities. With increasing the RMP amplitude in time during the discharge, the mode stabilization is first observed, but a large locked mode follows if the RMP amplitude is increased to a too large value, indicating that the RMP amplitude is important in determining the plasma response and the tearing mode behavior. By careful adjustment of the RMP amplitude, the (partial) stabilization of the m/n =2/1 tearing mode by RMPs of moderate amplitude has been achieved without causing mode locking (m and n are the poloidal and toroidal mode numbers). To compare with experimental results, nonlinear numerical modeling based on reduced MHD equations has been carried out. With experimental parameters as input, both the mode locking and mode stabilization by RMPs are also obtained from numerical modeling. Further calculations have been carried out to study the plasma parameters affecting the mode stabilization by RMPs, including the plasma rotation frequency, viscosity, Alfv\'en velocity, and the RMPs amplitude. It is found that the suppression of the tearing mode by RMPs of moderate amplitude is possible for a sufficiently high ratio of plasma rotation velocity to the Alfv\'en speed. A larger plasma viscosity enhances the mode stabilization.

physics.plasm-ph↗

arXiv2026

Control of Electron Energy Distribution Functions by Current Waveform Tailoring in Inductively Coupled Radio Frequency Plasmas

Based on two-dimensional particle-in-cell simulations a novel approach towards Electron Energy Probability Function (EEPF) and plasma chemistry control by Current Waveform Tailoring (CWT) in the coil of inductively coupled discharges is proposed. Varying the shape of this current waveform provides electrical control of the dynamics of the electric field in the plasma. Using sawtooth instead of sinusoidal waveforms allows breaking and controlling the temporal symmetry of the electric field dynamics. In this way CWT allows controlling the EEPF, the ionization-to-excitation rate ratio, and the plasma chemistry.

physics.plasm-ph↗

arXiv2025

Effects of turbulence spreading and symmetry breaking on edge shear flow during sawtooth cycles in J-TEXT tokamak

Sawtooth oscillations can trigger off heat and turbulence pulses that propagate into the edge plasma, and thus enhancing the edge shear flow and inducing a transition from low confinement mode to high confinement mode. The influences of turbulence spreading and symmetry breaking on edge shear flow with sawtooth crashes are observed in the J-TEXT tokamak. The edge plasma turbulence and shear flow are measured using a fast reciprocating electrostatic probe array. After sawtooth crashes, the heat and turbulence pulses in the core propagate to the edge, with the turbulence pulse being faster than the heat pulse. After sawtooth crashes, the edge electron temperature increases and the edge turbulence is enhanced, with turbulence preceding temperature. The enhanced edge turbulence is mainly composed of two parts: the turbulence driven by local gradient and the turbulence spreading from core to edge. The development of the estimated turbulence spreading rate is prior to that of the turbulence driving rate. The increase in the turbulence intensity can cause the turbulent Reynold stress and its gradient to increase, thereby enhancing shear flows and radial electric fields. Turbulence spreading leads the edge Reynolds stresses to develop and the shear flow to be faster than edge electron temperature. The Reynolds stress arises from the symmetry breaking of the turbulence wave number spectrum. After sawtooth collapses, the joint probability density function of radial wave number and poloidal wave number of turbulence intensity exhibits strong asymmetry. These results show that the turbulence spreading and symmetry breaking can enhance turbulent Reynolds stress, thereby driving shear flows, after sawtooth has crashed.

physics.plasm-ph↗

arXiv2025

Healing of the edge magnetic island in the island divertor configuration on J-TEXT

The phenomena of island healing and configuration transition induced by high-power electron cyclotron resonance heating (ECRH) have been investigated in the island divertor configuration on the J-TEXT tokamak. Experimental results reveal that the size of the edge open magnetic island with mode number m/n = 3/1 decreases substantially under specific ECRH conditions. This process, referred to as island healing, occurs when ECRH with a power of 500~600 kW is deposited in the plasma core or when 250 kW of ECRH is deposited at r = 0.5 a, where a is the minor radius. The reduction of the island width makes the island divertor ineffective and transition into the limiter configuration. A model incorporating the influence of ECRH on the scrape-off layer (SOL) thermoelectric current is proposed to explain the observed changes in the edge magnetic topology of the island divertor configuration. These findings suggest that ECRH should be deposited at the plasma core with carefully controlled power to ensure the stable and compatible operation of ECRH and the island divertor configuration in tokamaks. The results can provide insights into achieving robust operation of an island divertor in tokamaks.

physics.plasm-ph↗

arXiv2024

SFVInt: Simple, Fast and Generic Variable-Length Integer Decoding using Bit Manipulation Instructions

The ubiquity of variable-length integers in data storage and communication necessitates efficient decoding techniques. In this paper, we present SFVInt, a simple and fast approach to decode the prevalent Little Endian Base-128 (LEB128) varints. Our approach effectively utilizes the Bit Manipulation Instruction Set 2 (BMI2) in modern Intel and AMD processors, achieving significant performance improvement while maintaining simplicity and avoiding overengineering. SFVInt, with its generic design, effectively processes both 32-bit and 64-bit unsigned integers using a unified code template, marking a significant leap forward in varint decoding efficiency. We thoroughly evaluate SFVInt's performance across various datasets and scenarios, demonstrating that it achieves up to a 2x increase in decoding speed when compared to varint decoding methods used in established frameworks like Facebook Folly and Google Protobuf.

cs.DB↗

arXiv2023

Extraction of n = 0 pick-up by locked mode detectors based on neural networks in J-TEXT

Measurement of locked mode (LM) is important for the physical research of Magnetohydrodynamic (MHD) instabilities and plasma disruption. The n = 0 pick-up need to be extracted and subtracted to calculate the amplitude and phase of the LM. A new method to extract this pick-up has been developed by predicting the n = 0 pick-up brn=0 by the LM detectors based on Neural Networks (NNs) in J-TEXT. An approach called Power Multiple Time Scale (PMTS) has been developed with outstanding regressing effect in multiple frequency ranges. Three models have been progressed based on PMTS NNs. PMTS could fit the brn=0 on the LM detectors with little errors both in time domain and frequency domain. The n>0 pick-up brn>0 generated by resonant magnetic perturbations (RMPs) can be obtained after subtracting the extracted brn=0. This new method uses only one LM instead of 4 LM detectors to extract brn=0. Therefore, the distribution of the LM detectors can also be optimized based on this new method.

physics.plasm-ph↗

arXiv2023

Cross-Tokamak Deployment Study of Plasma Disruption Predictors Based on Convolutional Autoencoder

In the initial stages of operation for future tokamak, facing limited data availability, deploying data-driven disruption predictors requires optimal performance with minimal use of new device data. This paper studies the issue of data utilization in data-driven disruption predictor during cross tokamak deployment. Current predictors primarily employ supervised learning methods and require a large number of disruption and non-disruption shots for training. However, the scarcity and high cost of obtaining disruption shots for future tokamaks result in imbalanced training datasets, reducing the performance of supervised learning predictors. To solve this problem, we propose the Enhanced Convolutional Autoencoder Anomaly Detection (E-CAAD) predictor. E-CAAD can be only trained by normal samples from non-disruption shots and can also be trained by disruption precursor samples when disruption shots occur. This model not only overcomes the sample imbalance in supervised learning predictors, but also overcomes the inefficient dataset utilization faced by traditional anomaly detection predictors that cannot use disruption precursor samples for training, making it more suitable for the unpredictable datasets of future tokamaks. Compared to traditional anomaly detection predictor, the E-CAAD predictor performs better in disruption prediction and is deployed faster on new devices. Additionally, we explore strategies to accelerate deployment of E-CAAD predictor on the new device by using data from existing devices. Two deployment strategies are presented: mixing data from existing devices and fine-tuning the predictor trained on existing devices. Our comparisons indicate that the data from existing device can accelerate the deployment of predictor on new device. Notably, the fine-tuning strategy yields the fastest deployment on new device among the designed strategies.

physics.plasm-ph↗

arXiv2023

Cross-tokamak Disruption Prediction based on Physics-Guided Feature Extraction and domain adaptation

The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extract physics-guided features from the diagnostic signals of each tokamak, called physics-guided feature extraction (PGFE). The second step is to align a few data from the future tokamak (target domain) and a large amount of data from existing tokamak (source domain) based on a domain adaptation algorithm called CORrelation ALignment (CORAL). It is the first attempt at applying domain adaptation in the task of disruption prediction. PGFE has been successfully applied in J-TEXT to predict disruption with excellent performance. PGFE can also reduce the data volume requirements due to extracting the less device-specific features, thereby establishing a solid foundation for cross-tokamak disruption prediction. We have further improved CORAL (supervised CORAL, S-CORAL) to enhance its appropriateness in feature alignment for the disruption prediction task. To simulate the existing and future tokamak case, we selected J-TEXT as the existing tokamak and EAST as the future tokamak, which has a large gap in the ranges of plasma parameters. The utilization of the S-CORAL improves the disruption prediction performance on future tokamak. Through interpretable analysis, we discovered that the learned knowledge of the disruption prediction model through this approach exhibits more similarities to the model trained on large data volumes of future tokamak.

physics.plasm-ph↗

arXiv2023

Critical roles of edge turbulent transport in the formation of high-field-side high-density front and density limit disruption in J-TEXT tokamak

This article presents an in-depth study of the sequence of events leading to density limit disruption in J-TEXT tokamak plasmas, with an emphasis on boudary turbulent transport and the high-field-side high-density (HFSHD) front. These phenomena were extensively investigated by using Langmuir probe and Polarimeter-interferometer diagnostics.

physics.plasm-ph↗

arXiv2023

Validation of the plasma-wall self-organization model for density limit in ECRH-assisted start-up of Ohmic discharges on J-TEXT

A recently developed plasma-wall self-organization (PWSO) model predicts a significantly enhanced density limit, which may be attainable in tokamaks with ECRH-assisted ohmic startup and sufficiently high initial neutral density. Experiments have been conducted on J-TEXT to validate such a density limit scenario based on this model. Experimental results demonstrate that increasing the pre-filled gas pressure or ECRH power during the startup phase can effectively enhance plasma purity and raise the density limit at the flat-top. Despite the dominant carbon fraction in the wall material, some discharges approach the edge of the density-free regime of the 1D model of PWSO.

physics.plasm-ph↗

arXiv2023

Disruption Precursor Onset Time Study Based on Semi-supervised Anomaly Detection

The full understanding of plasma disruption in tokamaks is currently lacking, and data-driven methods are extensively used for disruption prediction. However, most existing data-driven disruption predictors employ supervised learning techniques, which require labeled training data. The manual labeling of disruption precursors is a tedious and challenging task, as some precursors are difficult to accurately identify, limiting the potential of machine learning models. To address this issue, commonly used labeling methods assume that the precursor onset occurs at a fixed time before the disruption, which may not be consistent for different types of disruptions or even the same type of disruption, due to the different speeds at which plasma instabilities escalate. This leads to mislabeled samples and suboptimal performance of the supervised learning predictor. In this paper, we present a disruption prediction method based on anomaly detection that overcomes the drawbacks of unbalanced positive and negative data samples and inaccurately labeled disruption precursor samples. We demonstrate the effectiveness and reliability of anomaly detection predictors based on different algorithms on J-TEXT and EAST to evaluate the reliability of the precursor onset time inferred by the anomaly detection predictor. The precursor onset times inferred by these predictors reveal that the labeling methods have room for improvement as the onset times of different shots are not necessarily the same. Finally, we optimize precursor labeling using the onset times inferred by the anomaly detection predictor and test the optimized labels on supervised learning disruption predictors. The results on J-TEXT and EAST show that the models trained on the optimized labels outperform those trained on fixed onset time labels.

physics.plasm-ph↗

arXiv2022

IDP-PGFE: An Interpretable Disruption Predictor based on Physics-Guided Feature Extraction

Disruption prediction has made rapid progress in recent years, especially in machine learning (ML)-based methods. Understanding why a predictor makes a certain prediction can be as crucial as the prediction's accuracy for future tokamak disruption predictors. The purpose of most disruption predictors is accuracy or cross-machine capability. However, if a disruption prediction model can be interpreted, it can tell why certain samples are classified as disruption precursors. This allows us to tell the types of incoming disruption and gives us insight into the mechanism of disruption. This paper designs a disruption predictor called Interpretable Disruption Predictor based On Physics-guided feature extraction (IDP-PGFE) on J-TEXT. The prediction performance of the model is effectively improved by extracting physics-guided features. A high-performance model is required to ensure the validity of the interpretation results. The interpretability study of IDP-PGFE provides an understanding of J-TEXT disruption and is generally consistent with existing comprehension of disruption. IDP-PGFE has been applied to the disruption due to continuously increasing density towards density limit experiments on J-TEXT. The time evolution of the PGFE features contribution demonstrates that the application of ECRH triggers radiation-caused disruption, which lowers the density at disruption. While the application of RMP indeed raises the density limit in J-TEXT. The interpretability study guides intuition on the physical mechanisms of density limit disruption that RMPs affect not only the MHD instabilities but also the radiation profile, which delays density limit disruption.

physics.plasm-ph↗

arXiv2022

Transferable Cross-Tokamak Disruption Prediction with Deep Hybrid Neural Network Feature Extractor

Predicting disruptions across different tokamaks is a great obstacle to overcome. Future tokamaks can hardly tolerate disruptions at high performance discharge. Few disruption discharges at high performance can hardly compose an abundant training set, which makes it difficult for current data-driven methods to obtain an acceptable result. A machine learning method capable of transferring a disruption prediction model trained on one tokamak to another is required to solve the problem. The key is a disruption prediction model containing a feature extractor that is able to extract common disruption precursor traces in tokamak diagnostic data, and a transferable disruption classifier. Based on the concerns above, the paper first presents a deep fusion feature extractor designed specifically for extracting disruption precursor features from common diagnostics on tokamaks according to currently known precursors of disruption, providing a promising foundation for transferable models. The fusion feature extractor is proved by comparing with manual feature extraction on J-TEXT. Based on the feature extractor trained on J-TEXT, the disruption prediction model was transferred to EAST data with mere 20 discharges from EAST experiment. The performance is comparable with a model trained with 1896 discharges from EAST. From the comparison among other model training scenarios, transfer learning showed its potential in predicting disruptions across different tokamaks.

physics.plasm-ph↗

arXiv2022

Quasi-static magnetic compression of field-reversed configuration plasma: Amended scalings and limits from two-dimensional MHD equilibrium

In this work, several key scaling laws of the quasi-static magnetic compression of field reversed configuration (FRC) plasma [Spencer, Tuszewski, and Linford, 1983] are amended from a series of 2D FRC MHD equilibriums numerically obtained using the Grad-Shafranov equation solver NIMEQ. Based on the new scaling for the elongation and the magnetic fields at the separatrix and the wall, the empirically stable limits for the compression ratio, the fusion gain, and the neutron yield are evaluated, which may serve as a more accurate estimate for the upper ceiling of performance from the magnetic compression of FRC plasma as a potential fusion energy as well as neutron source devices.

physics.plasm-ph↗

arXiv2021

MHD analysis on the physical designs of CFETR and HFRC

The China Fusion Engineering Test Reactor (CFETR) and the Huazhong Field Reversed Configuration (HFRC), currently both under intensive physical and engineering designs in China, are the two major projects representative of the low-density steady-state and high-density pulsed pathways to fusion. One of the primary tasks of the physics designs for both CFETR and HFRC is the assessment and analysis of the magnetohydrodynamic (MHD) stability of the proposed design schemes. Comprehensive efforts on the assessment of MHD stability of CFETR and HFRC baseline scenarios have led to preliminary progresses that may further benefit engineering designs.

physics.plasm-ph↗

arXiv2020

Design of simple stellarator using tilted toroidal field coils

This paper deals with the design of the stellarator field with the simple coil set. In order to realize the stellarator field by the simple coil set, the tilted toroidal field coil uses for creating the rotational transform. Sixteen tilted TF coils create the small radial field and large vertical field. With reducing the vertical field of the tilted toroidal field coil by the axisymmetric poloidal field coil, the stellarator field can be made. The formation of clear and nested flux surfaces is confirmed, and the rotational transform is proportional to the tilting angle of the toroidal field coil. Main components of the magnetic field for the simple stellarator in this paper are the large mirror ripple and small helical ripple. This is a similar property to the quasi-isodynamic configuration like the Wendelstein 7-X stellarator. The collisionless orbit for the proton is studied. For a moderate tilting angle of the toroidal field coil, the confinement of the passing and trapped particles improves.

physics.plasm-ph↗