Searcharxiv⌕ Search

arXiv subjects

Yongming Huang

Publications and source records attributed to Yongming Huang.

At least 73 records · Page 4Linked to original sources

Random Aggregate Beamforming for Over-the-Air Federated Learning in Large-Scale Networks

At present, there is a trend to deploy ubiquitous artificial intelligence (AI) applications at the edge of the network. As a promising framework that enables secure edge intelligence, federated learning (FL) has received widespread attention, and over-the-air computing (AirComp) has been integrated to further improve the communication efficiency. In this paper, we consider a joint device selection and aggregate beamforming design with the objectives of minimizing the aggregate error and maximizing the number of selected devices. This yields a combinatorial problem, which is difficult to solve especially in large-scale networks. To tackle the problems in a cost-effective manner, we propose a random aggregate beamforming-based scheme, which generates the aggregator beamforming vector via random sampling rather than optimization. The implementation of the proposed scheme does not require the channel estimation. We additionally use asymptotic analysis to study the obtained aggregate error and the number of the selected devices when the number of devices becomes large. Furthermore, a refined method that runs with multiple randomizations is also proposed for performance improvement. Extensive simulation results are presented to demonstrate the effectiveness of the proposed random aggregate beamforming-based scheme as well as the refined method.

cs.IT↗

Interleaved Training for Massive MIMO Downlink via Exploring Spatial Correlation

Interleaved training has been studied for single-user and multi-user massive MIMO downlink with either fully-digital or hybrid beamforming. However, the impact of channel correlation on its average training overhead is rarely addressed. In this paper, we explore the channel correlation to improve the interleaved training for single-user massive MIMO downlink. For the beam-domain interleaved training, we propose a modified scheme by optimizing the beam training codebook. The basic antenna-domain interleaved training is also improved by dynamically adjusting the training order of the base station (BS) antennas during the training process based on the values of the already trained channels. Exact and simplified approximate expressions of the average training length are derived in closed-form for the basic and modified beam-domain schemes and the basic antenna-domain scheme in correlated channels. For the modified antenna-domain scheme, a deep neural network (DNN)-based approximation is provided for fast performance evaluation. Analytical results and simulations verify the accuracy of our derived training length expressions and explicitly reveal the impact of system parameters on the average training length. In addition, the modified beam/antenna-domain schemes are shown to have a shorter average training length compared to the basic schemes.

cs.IT↗

Joint Port Selection Based Channel Acquisition for FDD Cell-Free Massive MIMO

In frequency division duplexing (FDD) cell-free massive MIMO, the acquisition of the channel state information (CSI) is very challenging because of the large overhead required for the training and feedback of the downlink channels of multiple cooperating base stations (BSs). In this paper, for systems with partial uplink-downlink channel reciprocity, and a general spatial domain channel model with variations in the average port power and correlation among port coefficients, we propose a joint-port-selection-based CSI acquisition and feedback scheme for the downlink transmission with zero-forcing precoding. The scheme uses an eigenvalue-decomposition-based transformation to reduce the feedback overhead by exploring the port correlation. We derive the sum-rate of the system for any port selection. Based on the sum-rate result, we propose a low-complexity greedy-search-based joint port selection (GS-JPS) algorithm. Moreover, to adapt to fast time-varying scenarios, a supervised deep learning-enhanced joint port selection (DL-JPS) algorithm is proposed. Simulations verify the effectiveness of our proposed schemes and their advantage over existing port-selection channel acquisition schemes.

cs.IT↗

Entropy-based Probing Beam Selection and Beam Prediction via Deep Learning

Hierarchical beam search in mmWave communications incurs substantial training overhead, necessitating deep learning-enabled beam predictions to effectively leverage channel priors and mitigate this overhead. In this study, we introduce a comprehensive probabilistic model of power distribution in beamspace, and formulate the joint optimization problem of probing beam selection and probabilistic beam prediction as an entropy minimization problem. Then, we propose a greedy scheme to iteratively and alternately solve this problem, where a transformer-based beam predictor is trained to estimate the conditional power distribution based on the probing beams and user location within each iteration, and the trained predictor selects an unmeasured beam that minimizes the entropy of remaining beams. To further reduce the number of interactions and the computational complexity of the iterative scheme, we propose a two-stage probing beam selection scheme. Firstly, probing beams are selected from a location-specific codebook designed by an entropy-based criterion, and predictions are made with corresponding feedback. Secondly, the optimal beam is identified using additional probing beams with the highest predicted power values. Simulation results demonstrate the superiority of the proposed schemes compared to hierarchical beam search and beam prediction with uniform probing beams.

cs.IT↗

Digital Twin-Enhanced Deep Reinforcement Learning for Resource Management in Networks Slicing

Network slicing-based communication systems can dynamically and efficiently allocate resources for diversified services. However, due to the limitation of the network interface on channel access and the complexity of the resource allocation, it is challenging to achieve an acceptable solution in the practical system without precise prior knowledge of the dynamics probability model of the service requests. Existing work attempts to solve this problem using deep reinforcement learning (DRL), however, such methods usually require a lot of interaction with the real environment in order to achieve good results. In this paper, a framework consisting of a digital twin and reinforcement learning agents is present to handle the issue. Specifically, we propose to use the historical data and the neural networks to build a digital twin model to simulate the state variation law of the real environment. Then, we use the data generated by the network slicing environment to calibrate the digital twin so that it is in sync with the real environment. Finally, DRL for slice optimization optimizes its own performance in this virtual pre-verification environment. We conducted an exhaustive verification of the proposed digital twin framework to confirm its scalability. Specifically, we propose to use loss landscapes to visualize the generalization of DRL solutions. We explore a distillation-based optimization scheme for lightweight slicing strategies. In addition, we also extend the framework to offline reinforcement learning, where solutions can be used to obtain intelligent decisions based solely on historical data. Numerical simulation experiments show that the proposed digital twin can significantly improve the performance of the slice optimization strategy.

cs.NI↗

Deep Learning-Based Modeling of 5G Core Control Plane for 5G Network Digital Twin

Digital twin serves as a crucial facilitator in the advancement and implementation of emerging technologies within 5G and beyond networks. However, the intricate structure and diverse functionalities of the existing 5G core network, especially the control plane, present challenges in constructing core network digital twins. In this paper, we propose two novel data-driven architectures for modeling the 5G control plane and implement corresponding deep learning models, namely 5GC-Seq2Seq and 5GC-former, based on the Vanilla Seq2Seq model and Transformer decoder respectively. We also present a solution enabling the interconversion of signaling messages and length-limited vectors to construct a dataset. The experiments are based on 5G core network signaling messages collected by the Spirent C50 network tester, encompassing various procedures such as registration, handover, and PDU sessions. The results show that 5GC-Seq2Seq achieves a 99.997\% F1-score (a metric measuring the accuracy of positive samples) in single UE scenarios with a simple structure, but exhibits significantly reduced performance in handling concurrency. In contrast, 5GC-former surpasses 99.999\% F1-score while maintaining robust performance under concurrent UE scenarios by constructing a more complex and highly parallel model. These findings validate that our method accurately replicates the principal functionalities of the 5G core network control plane.

eess.SY↗

Traffic-Aware Hierarchical Beam Selection for Cell-Free Massive MIMO

Beam selection for joint transmission in cell-free massive multi-input multi-output systems faces the problem of extremely high training overhead and computational complexity. The traffic-aware quality of service additionally complicates the beam selection problem. To address this issue, we propose a traffic-aware hierarchical beam selection scheme performed in a dual timescale. In the long-timescale, the central processing unit collects wide beam responses from base stations (BSs) to predict the power profile in the narrow beam space with a convolutional neural network, based on which the cascaded multiple-BS beam space is carefully pruned. In the short-timescale, we introduce a centralized reinforcement learning (RL) algorithm to maximize the satisfaction rate of delay w.r.t. beam selection within multiple consecutive time slots. Moreover, we put forward three scalable distributed algorithms including hierarchical distributed Lyapunov optimization, fully distributed RL, and centralized training with decentralized execution of RL to achieve better scalability and better tradeoff between the performance and the execution signal overhead. Numerical results demonstrate that the proposed schemes significantly reduce both model training cost and beam training overhead and are easier to meet the user-specific delay requirement, compared to existing methods.

cs.IT↗

Incremental Collaborative Beam Alignment for Millimeter Wave Cell-Free MIMO Systems

Millimeter wave (mmWave) cell-free MIMO achieves an extremely high rate while its beam alignment (BA) suffers from excessive overhead due to a large number of transceivers. Recently, user location and probing measurements are utilized for BA based on machine learning (ML) models, e.g., deep neural network (DNN). However, most of these ML models are centralized with high communication and computational overhead and give no specific consideration to practical issues, e.g., limited training data and real-time model updates. In this paper, we study the {probing} beam-based BA for mmWave cell-free MIMO downlink with the help of broad learning (BL). For channels without and with uplink-downlink reciprocity, we propose the user-side and base station (BS)-side BL-aided incremental collaborative BA approaches. Via transforming the centralized BL into a distributed learning with data and feature splitting respectively, the user-side and BS-side schemes realize implicit sharing of multiple user data and multiple BS features. Simulations confirm that the user-side scheme is applicable to fast time-varying and/or non-stationary channels, while the BS-side scheme is suitable for systems with low-bandwidth fronthaul links and a central unit with limited computing power. The advantages of proposed schemes are also demonstrated compared to traditional and DNN-aided BA schemes.

cs.IT↗

Closed-form Approximation for Performance Bound of Finite Blocklength Massive MIMO Transmission

Ultra-reliable low latency communications (uRLLC) is adopted in the fifth generation (5G) mobile networks to better support mission-critical applications that demand high level of reliability and low latency. With the aid of well-established multiple-input multiple-output (MIMO) information theory, uRLLC in the future 6G is expected to provide enhanced capability towards extreme connectivity. Since the latency constraint can be represented equivalently by blocklength, channel coding theory at finite block-length plays an important role in the theoretic analysis of uRLLC. On the basis of Polyanskiy's and Yang's asymptotic results, we first derive the exact close-form expressions for the expectation and variance of channel dispersion. Then, the bound of average maximal achievable rate is given for massive MIMO systems in ideal independent and identically distributed fading channels. This is the study to reveal the underlying connections among the fundamental parameters in MIMO transmissions in a concise and complete close-form formula. Most importantly, the inversely proportional law observed therein implies that the latency can be further reduced at expense of spatial degrees of freedom.

cs.IT↗

Amplitude-Constrained Constellation and Reflection Pattern Designs for Directional Backscatter Communications Using Programmable Metasurface

The large scale reflector array of programmable metasurfaces is capable of increasing the power efficiency of backscatter communications via passive beamforming and thus has the potential to revolutionize the low-data-rate nature of backscatter communications. In this paper, we propose to design the power-efficient higher-order constellation and reflection pattern under the amplitude constraint brought by backscatter communications. For the constellation design, we adopt the amplitude and phase-shift keying (APSK) constellation and optimize the parameters of APSK such as ring number, ring radius, and inter-ring phase difference. Specifically, we derive closed-form solutions to the optimal ring radius and interring phase difference for an arbitrary modulation order in the decomposed subproblems. For the reflection pattern design, we propose to optimize the passive beamforming vector by solving a multi-objective optimization problem that maximizes reflection power and guarantees beam homogenization within the interested angle range. To solve the problem, we propose a constant-modulus power iteration method, which is proven to be monotonically increasing, to maximize the objective function in each iteration. Numerical results show that the proposed APSK constellation design and reflection pattern design outperform the existing modulation and beam pattern designs in programmable metasurface enabled backscatter communications.

eess.SP↗

AIR-DA: Adversarial Image Reconstruction for Unsupervised Domain Adaptive Object Detection

Unsupervised domain adaptive object detection is a challenging vision task where object detectors are adapted from a label-rich source domain to an unlabeled target domain. Recent advances prove the efficacy of the adversarial based domain alignment where the adversarial training between the feature extractor and domain discriminator results in domain-invariance in the feature space. However, due to the domain shift, domain discrimination, especially on low-level features, is an easy task. This results in an imbalance of the adversarial training between the domain discriminator and the feature extractor. In this work, we achieve a better domain alignment by introducing an auxiliary regularization task to improve the training balance. Specifically, we propose Adversarial Image Reconstruction (AIR) as the regularizer to facilitate the adversarial training of the feature extractor. We further design a multi-level feature alignment module to enhance the adaptation performance. Our evaluations across several datasets of challenging domain shifts demonstrate that the proposed method outperforms all previous methods, of both one- and two-stage, in most settings.

cs.CV↗

In-Situ Calibration of Antenna Arrays for Positioning With 5G Networks

Owing to the ubiquity of cellular communication signals, positioning with the fifth generation (5G) signal has emerged as a promising solution in global navigation satellite system-denied areas. Unfortunately, although the widely employed antenna arrays in 5G remote radio units (RRUs) facilitate the measurement of the direction of arrival (DOA), DOA-based positioning performance is severely degraded by array errors. This paper proposes an in-situ calibration framework with a user terminal transmitting 5G reference signals at several known positions in the actual operating environment and the accessible RRUs estimating their array errors from these reference signals. Further, since sub-6GHz small-cell RRUs deployed for indoor coverage generally have small-aperture antenna arrays, while 5G signals have plentiful bandwidth resources, this work segregates the multipath components via super-resolution delay estimation based on the maximum likelihood criteria. This differs significantly from existing in-situ calibration works which resolve multipaths in the spatial domain. The superiority of the proposed method is first verified by numerical simulations. We then demonstrate via field test with commercial 5G equipment that, a reduction of 46.7% for 1-$σ$ DOA estimation error can be achieved by in-situ calibration using the proposed method.

eess.SP↗

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed.

eess.SP↗

From ORAN to Cell-Free RAN: Architecture, Performance Analysis, Testbeds and Trials

Open radio access network (ORAN) provides an open architecture to implement radio access network (RAN) of the fifth generation (5G) and beyond mobile communications. As a key technology for the evolution to the sixth generation (6G) systems, cell-free massive multiple-input multiple-output (CF-mMIMO) can effectively improve the spectrum efficiency, peak rate and reliability of wireless communication systems. Starting from scalable implementation of CF-mMIMO, we study a cell-free RAN (CF-RAN) under the ORAN architecture. Through theoretical analysis and numerical simulation, we investigate the uplink and downlink spectral efficiencies of CF-mMIMO with the new architecture. We then discuss the implementation issues of CF-RAN under ORAN architecture, including time-frequency synchronization and over-the-air reciprocity calibration, low layer splitting, deployment of ORAN radio units (O-RU), artificial intelligent based user associations. Finally, we present some representative experimental results for the uplink distributed reception and downlink coherent joint transmission of CF-RAN with commercial off-the-shelf O-RUs.

cs.IT↗

Fast Direct Localization for Millimeter Wave MIMO Systems via Deep ADMM Unfolding

Massive arrays deployed in millimeter-wave systems enable high angular resolution performance, which in turn facilitates sub-meter localization services. Albeit suboptimal, up to now the most popular localization approach has been based on a so-called two-step procedure, where triangulation is applied upon aggregation of the angle-of-arrival (AoA) measurements from the collaborative base stations. This is mainly due to the prohibitive computational cost of the existing direct localization approaches in large-scale systems. To address this issue, we propose a deep unfolding based fast direct localization solver. First, the direct localization is formulated as a joint $l_1$-$l_{2,1}$ norm sparse recovery problem, which is then solved by using alternating direction method of multipliers (ADMM). Next, we develop a deep ADMM unfolding network (DAUN) to learn the ADMM parameter settings from the training data and a position refinement algorithm is proposed for DAUN. Finally, simulation results showcase the superiority of the proposed DAUN over the baseline solvers in terms of better localization accuracy, faster convergence and significantly lower computational complexity.

eess.SP↗

Secure Communication for Spatially Correlated RIS-Aided Multiuser Massive MIMO Systems: Analysis and Optimization

This letter investigates the secure communication in a reconfigurable intelligent surface (RIS)-aided multiuser massive multiple-input multiple-output (MIMO) system exploiting artificial noise (AN). We first derive a closed-form expression of the ergodic secrecy rate under spatially correlated MIMO channels. By using this derived result, we further optimize the power fraction of AN in closed form and the RIS phase shifts by developing a gradient-based algorithm, which requires only statistical channel state information (CSI). Our analysis shows that spatial correlation at the RIS provides an additional dimension for optimizing the RIS phase shifts. Numerical simulations validate the analytical results which show the insightful interplay among the system parameters and the degradation of secrecy performance due to high spatial correlation at the RIS.

cs.IT↗

Link-level simulator for 5G localization

Channel-state-information-based localization in 5G networks has been a promising way to obtain highly accurate positions compared to previous communication networks. However, there is no unified and effective platform to support the research on 5G localization algorithms. This paper releases a link-level simulator for 5G localization, which can depict realistic physical behaviors of the 5G positioning signal transmission. Specifically, we first develop a simulation architecture considering more elaborate parameter configuration and physical-layer processing. The architecture supports the link modeling at sub-6GHz and millimeter-wave (mmWave) frequency bands. Subsequently, the critical physical-layer components that determine the localization performance are designed and integrated. In particular, a lightweight new-radio channel model and hardware impairment functions that significantly limit the parameter estimation accuracy are developed. Finally, we present three application cases to evaluate the simulator, i.e. two-dimensional mobile terminal localization, mmWave beam sweeping, and beamforming-based angle estimation. The numerical results in the application cases present the performance diversity of localization algorithms in various impairment conditions.

eess.SP↗

Toward 6G TK$μ$ Extreme Connectivity: Architecture, Key Technologies and Experiments

Sixth-generation (6G) networks are evolving towards new features and order-of-magnitude enhancement of systematic performance metrics compared to the current 5G. In particular, the 6G networks are expected to achieve extreme connectivity performance with Tbps-scale data rate, Kbps/Hz-scale spectral efficiency, and $μ$s-scale latency. To this end, an original three-layer 6G network architecture is designed to realise uniform full-spectrum cell-free radio access and provide task-centric agile proximate support for diverse applications. The designed architecture is featured by super edge node (SEN) which integrates connectivity, computing, AI, data, etc. On this basis, a technological framework of pervasive multi-level (PML) AI is established in the centralised unit to enable task-centric near-real-time resource allocation and network automation. We then introduce a radio access network (RAN) architecture of full spectrum uniform cell-free networks, which is among the most attractive RAN candidates for 6G TK$μ$ extreme connectivity. A few most promising key technologies, i.e., cell-free massive MIMO, photonics-assisted Terahertz wireless access and spatiotemporal two-dimensional channel coding are further discussed. A testbed is implemented and extensive trials are conducted to evaluate innovative technologies and methodologies. The proposed 6G network architecture and technological framework demonstrate exciting potentials for full-service and full-scenario applications.

cs.NI↗