arXiv subjects

Yongsoon Eun

Publications and source records attributed to Yongsoon Eun.

11 recordsLinked to original sources

arXiv2024

Data-driven System Interconnections and a Novel Data-enabled Internal Model Control

Over the past two decades, there has been a growing interest in control systems research to transition from model-based methods to data-driven approaches. In this study, we aim to bridge a divide between conventional model-based control and emerging data-driven paradigms grounded in Willem's fundamental lemma. Specifically, we study how input/output data from two separate systems can be manipulated to represent the behavior of interconnected systems, either connected in series or through feedback. Using these results, this paper introduces the Internal Behavior Control (IBC), a new control strategy based on the well-known Internal Model Control (IMC) but viewed under the lens of Behavioral System Theory. Similar to IMC, the IBC is easy to tune and results in perfect tracking and disturbance rejection but, unlike IMC, does not require a parametric model of the dynamics. We present two approaches for IBC implementation: a component-by-component one and a unified one. We compare the two approaches in terms of filter design, computations, and memory requirements.

eess.SY↗

arXiv2022

Data-Driven Inverse of Linear Systems and Application to Disturbance Observers

This work develops a data-based construction of inverse dynamics for LTI systems. Specifically, the problem addressed here is to find an input sequence from the corresponding output sequence based on pre-collected input and output data. The problem can be considered as a reverse of the recent use of behavioral approach, in which the output sequence is obtained for a given input sequence by solving an equation formed by pre-collected data. The condition under which the problem gives a solution is investigated and turns out to be L-delay invertibility of the plant and a certain degree of persistent excitation of the data input. The result is applied to form a data-driven disturbance observer. The plant dynamics augmented by the data-driven disturbance observer exhibits disturbance rejection without the model knowledge of the plant.

eess.SY↗

arXiv2022

Explainable Deep Learning Algorithm for Distinguishing Incomplete Kawasaki Disease by Coronary Artery Lesions on Echocardiographic Imaging

Background and Objective: Incomplete Kawasaki disease (KD) has often been misdiagnosed due to a lack of the clinical manifestations of classic KD. However, it is associated with a markedly higher prevalence of coronary artery lesions. Identifying coronary artery lesions by echocardiography is important for the timely diagnosis of and favorable outcomes in KD. Moreover, similar to KD, coronavirus disease 2019, currently causing a worldwide pandemic, also manifests with fever; therefore, it is crucial at this moment that KD should be distinguished clearly among the febrile diseases in children. In this study, we aimed to validate a deep learning algorithm for classification of KD and other acute febrile diseases. Methods: We obtained coronary artery images by echocardiography of children (n = 88 for KD; n = 65 for pneumonia). We trained six deep learning networks (VGG19, Xception, ResNet50, ResNext50, SE-ResNet50, and SE-ResNext50) using the collected data. Results: SE-ResNext50 showed the best performance in terms of accuracy, specificity, and precision in the classification. SE-ResNext50 offered a precision of 76.35%, a sensitivity of 82.64%, and a specificity of 58.12%. Conclusions: The results of our study suggested that deep learning algorithms have similar performance to an experienced cardiologist in detecting coronary artery lesions to facilitate the diagnosis of KD.

eess.IV↗

arXiv2022

Cyclops: Open Platform for Scale Truck Platooning

Cyclops, introduced in this paper, is an open research platform for everyone that wants to validate novel ideas and approaches in the area of self-driving heavy-duty vehicle platooning. The platform consists of multiple 1/14 scale semi-trailer trucks, a scale proving ground, and associated computing, communication and control modules that enable self-driving on the proving ground. A perception system for each vehicle is composed of a lidar-based object tracking system and a lane detection/control system. The former is to maintain the gap to the leading vehicle and the latter is to maintain the vehicle within the lane by steering control. The lane detection system is optimized for truck platooning where the field of view of the front-facing camera is severely limited due to a small gap to the leading vehicle. This platform is particularly amenable to validate mitigation strategies for safety-critical situations. Indeed, a simplex structure is adopted in the embedded module for testing various fail safe operations. We illustrate a scenario where camera sensor fails in the perception system but the vehicle operates at a reduced capacity to a graceful stop. Details of the Cyclops including 3D CAD designs and algorithm source codes are released for those who want to build similar testbeds.

cs.RO↗

arXiv2021

Zero-dynamics Attack, Variations, and Countermeasures

This chapter presents an overview on actuator attacks that exploit zero dynamics, and countermeasures against them. First, zero-dynamics attack is re-introduced based on a canonical representation called normal form. Then it is shown that the target dynamic system is at elevated risk if the associated zero dynamics is unstable. From there on, several questions are raised in series to ensure when the target system is immune to the attack of this kind. The first question is: Is the target system secure from zero-dynamics attack if it does not have any unstable zeros? An answer provided for this question is: No, the target system may still be at risk due to another attack surface emerging in the process of implementation. This is followed by a series of next questions, and in the course of providing answers, variants of the classic zero-dynamics attack are presented, from which the vulnerability of the target system is explored in depth. At the end, countermeasures are proposed to render the attack ineffective. Because it is known that the zero-dynamics in continuous-time systems cannot be modified by feedback, the main idea of the countermeasure is to relocate any unstable zero to a stable region in the stage of digital implementation through modified digital samplers and holders. Adversaries can still attack actuators, but due to the re-located zeros, they are of little use in damaging the target system.

eess.SY↗

arXiv2020

SaferCross: Enhancing Pedestrian Safety Using Embedded Sensors of Smartphone

The number of pedestrian accidents continues to keep climbing. Distraction from smartphone is one of the biggest causes for pedestrian fatalities. In this paper, we develop SaferCross, a mobile system based on the embedded sensors of smartphone to improve pedestrian safety by preventing distraction from smartphone. SaferCross adopts a holistic approach by identifying and developing essential system components that are missing in existing systems and integrating the system components into a "fully-functioning" mobile system for pedestrian safety. Specifically, we create algorithms for improving the accuracy and energy efficiency of pedestrian positioning, effectiveness of phone activity detection, and real-time risk assessment. We demonstrate that SaferCross, through systematic integration of the developed algorithms, performs situation awareness effectively and provides a timely warning to the pedestrian based on the information obtained from smartphone sensors and Direct Wi-Fi-based peer-to-peer communication with approaching cars. Extensive experiments are conducted in a department parking lot for both component-level and integrated testing. The results demonstrate that the energy efficiency and positioning accuracy of SaferCross are improved by 52% and 72% on average compared with existing solutions with missing support for positioning accuracy and energy efficiency, and the phone-viewing event detection accuracy is over 90%. The integrated test results show that SaferCross alerts the pedestrian timely with an average error of 1.6sec in comparison with the ground truth data, which can be easily compensated by configuring the system to fire an alert message a couple of seconds early.

cs.CY↗

arXiv2018

Detection of Sensor Attack and Resilient State Estimation for Uniformly Observable Nonlinear Systems having Redundant Sensors

This paper presents a detection algorithm for sensor attacks and a resilient state estimation scheme for a class of uniformly observable nonlinear systems. An adversary is supposed to corrupt a subset of sensors with the possibly unbounded signals, while the system has sensor redundancy. We design an individual high-gain observer for each measurement output so that only the observable portion of the system state is obtained. Then, a nonlinear error correcting problem is solved by collecting all the information from those partial observers and exploiting redundancy. A computationally efficient, on-line monitoring scheme is presented for attack detection. Based on the attack detection scheme, an algorithm for resilient state estimation is provided. The simulation results demonstrate the effectiveness of the proposed algorithm.

eess.SY↗

arXiv2018

On Redundant Observability: From Security Index to Attack Detection and Resilient State Estimation

The security of control systems under sensor attacks is investigated. Redundant observability is introduced, explaining existing security notions including the security index, attack detectability, and observability under attacks. Equivalent conditions between redundant observability and existing notions are presented. Based on a bank of partial observers utilizing Kalman decomposition and a decoder exploiting redundancy, an estimator design algorithm is proposed enhancing the resilience of control systems. This scheme substantially improves computational efficiency utilizing far less memory.

eess.SY↗

arXiv2018

A Zero-stealthy Attack for Sampled-data Control Systems via Input Redundancy

In this paper, we introduce a new vulnerability of cyber-physical systems to malicious attack. It arises when the physical plant, that is modeled as a continuous-time LTI system, is controlled by a digital controller. In the sampled-data framework, most anomaly detectors monitor the plant's output only at discrete time instants, and thus, nothing abnormal can be detected as long as the sampled output behaves normal. This implies that if an actuator attack drives the plant's state to pass through the kernel of the output matrix at each sensing time, then the attack compromises the system while remaining stealthy. We show that this type of attack always exists when the sampled-data system has an input redundancy, i.e., the number of inputs being larger than that of the outputs or the sampling rate of the actuators being higher than that of the sensors. Simulation results for the X-38 vehicle and for the other numerical examples illustrate this new attack strategy possibly brings disastrous consequences.

eess.SY↗

arXiv2017

Semi-Global Attitude Controls Bypassing the Topological Obstruction on SO(3)

This paper presents global tracking strategies for the attitude dynamics of a rigid body. It is well known that global attractivity is prohibited for continuous attitude control systems on the special orthogonal group. Such topological restriction has been dealt with either by constructing smooth attitude control systems that exclude a set of measure zero in the region of attraction, or by introducing hybrid control systems to obtain global asymptotic stability. This paper proposes alternative attitude control systems that are continuous in time to achieve exponential stability, where the region of attraction covers the entire special orthogonal group. The main contribution of this paper is providing a new framework to overcome the topological restriction in attitude controls without relying on discontinuities through the controlled maneuvers. The efficacy of the proposed methods is illustrated by numerical simulations and experiments.

math.OC↗

arXiv2017

Adaptive Multi-Class Audio Classification in Noisy In-Vehicle Environment

With ever-increasing number of car-mounted electric devices and their complexity, audio classification is increasingly important for the automotive industry as a fundamental tool for human-device interactions. Existing approaches for audio classification, however, fall short as the unique and dynamic audio characteristics of in-vehicle environments are not appropriately taken into account. In this paper, we develop an audio classification system that classifies an audio stream into music, speech, speech+music, and noise, adaptably depending on driving environments including highway, local road, crowded city, and stopped vehicle. More than 420 minutes of audio data including various genres of music, speech, speech+music, and noise are collected from diverse driving environments. The results demonstrate that the proposed approach improves the average classification accuracy up to 166%, and 64% for speech, and speech+music, respectively, compared with a non-adaptive approach in our experimental settings.

cs.SD↗