arXiv subjects

Yongzhuo Li

Publications and source records attributed to Yongzhuo Li.

12 recordsLinked to original sources

arXiv2026

Magic-free coexisting photonic and phononic moiré flat bands

Moiré flat bands enhance localization and interactions through suppressed group velocity, but existing approaches largely target a single physical field because distinct excitations generally require different, finely tuned magic configurations. Here we introduce a flat-band mechanism based on strong diffractive hybridization among moiré-folded bands. Period-mismatched modulations open distinct coupling channels whose hybridization renormalizes the band dispersion. An effective Hamiltonian shows that increasing the diffractive coupling progressively suppresses the group velocity, driving the system toward a flat-band regime without field-specific magic configurations. This coupling-induced mechanism enables band flattening across distinct physical excitations. We demonstrate this mechanism in a single-layer moiré optomechanical crystal, where photonic and phononic flat bands are simultaneously realized, and their localized modes and optomechanical interaction are experimentally observed. Beyond photonic and phononic systems, this mechanism may extend to other wave and quasiparticle platforms, providing a general route to co-localizing and coupling distinct physical fields in moiré systems.

physics.optics↗

arXiv2025

Arbitrary-order exceptional points in a nanomechanical cavity

Higher-order exceptional points (EPs) govern non-Hermitian system dynamics through their enriched and sharpened spectral topology, yet the intrinsic topological fragility hinders robust experimental realization. Here, we present a scalable architecture that implements arbitrary-order EPs via a recurrent network comprising a single nanomechanical resonator and unlimited virtual resonators. We experimentally realize mechanical EPs up to the seventh order and confirm this architecture's scalability. Moreover, we reveal that the fundamental noise component and the measured signal share the same system coupling channel and thus undergo identical root-response amplification near EPs of arbitrary order, consistent with our signal-to-noise ratio measurements. Our work establishes a general platform for exploring higher-order EP-based phenomena while clarifying the fundamental boundary of non-Hermitian sensitivity enhancement across diverse physical systems.

physics.optics↗

arXiv2025

Multi-channel electrically tunable varifocal metalens with compact multilayer polarization-dependent metasurfaces and liquid crystals

As an essential module of optical systems, varifocal lens usually consists of multiple mechanically moving lenses along the optical axis. The recent development of metasurfaces with tunable functionalities holds the promise of miniaturizing varifocal lens. However, existing varifocal metalenses are hard to combine electrical tunability with scalable number and range of focal lengths, thus limiting the practical applications. Our previous work shows that the electrically tunable channels could be increased to 2N by cascading N polarization-dependent metasurfaces with liquid crystals (LCs). Here, we demonstrated a compact eight-channel electrically tunable varifocal metalens with three single-layer polarization-multiplexed bi-focal metalens and three LC cells. The total thickness of the device is ~6 mm, while the focal lengths could be switched among eight values within the range of 3.6 to 9.6 mm. The scheme is scalable in number and range of focal lengths and readily for further miniaturization. We believe that our proposal would open new possibilities of miniaturized imaging systems, AR/VR displays, LiDAR, etc.

physics.optics↗

arXiv2025

Polarization Decoupling Multi-Port Beam-Splitting Metasurface for Miniaturized Magneto-Optical Trap

In regular magneto-optical trap (MOT) systems, the delivery of six circularly polarized (CP) cooling beams requires complex and bulky optical arrangements including waveplates, mirrors, retroreflectors, etc. To address such technique challenges, we have proposed a beam delivery system for miniaturized MOT entirely based on meta-devices. The key component is a novel multi-port beam-splitting (PD-MPBS) metasurface that relies on both propagation phase and geometric phase. The fabricated samples exhibit high beam-splitting power uniformity (within 4.4%) and polarization purities (91.29%~93.15%). By leveraging such beam-splitting device as well as reflective beam-expanding meta-device, an integrated six-beam delivery system for miniaturized MOT application has been implemented. The experimental results indicate that six expanded beams have been successfully delivered with uniform power (within 9.5%), the desired CP configuration and large overlapping volume (76.2 mm^3). We believe that a miniaturized MOT with the proposed beam delivery system is very promising for portable application of cold atom technology in precision measurement, atomic clock, quantum simulation and computing, etc.

physics.optics↗

arXiv2025

Demonstration of Time-reversal Symmetric Two-Dimensional Photonic Topological Anderson Insulator

Recently, the impact of disorder on topological properties has attracted significant attention in photonics, especially the intriguing disorder-induced topological phase transitions in photonic topological Anderson insulators (PTAIs). However, the reported PTAIs are based on time-reversal symmetry broken systems or quasi-three-dimensional time-reversal invariant system, both of which would limit the applications in integrated optics. Here, we realize a time-reversal symmetric two-dimensional PTAI on silicon platform within the near-IR wavelength range, taking the advantageous valley degree of freedom of photonic crystal. A low-threshold topological Anderson phase transition is observed by applying disorder to the critical topologically trivial phase. Conversely, we have also realized extremely robust topologically protected edge states based on the stable topological phase. Both two phenomena are validated through theoretical Dirac Hamiltonian analysis, numerical simulations, and experimental measurements. Our proposed structure holds promise to achieve near-zero topological phase transition thresholds, which breaks the conventional cognition that strong disorder is required to induce the phase transition. It significantly alleviates the difficulty of manipulating disorder and could be extended to other systems, such as condensed matter systems where strong disorder is hard to implement. This work is also beneficial to construct highly robust photonic integrated circuits serving for on-chip photonic and quantum optic information processing. Moreover, this work also provides an outstanding platform to investigate on-chip integrated disordered systems.

physics.optics↗

arXiv2024

SUANPAN: Scalable Photonic Linear Vector Machine

Photonic linear operation is a promising approach to handle the extensive vector multiplications in artificial intelligence techniques due to the natural bosonic parallelism and high-speed information transmission of photonics. Although it is believed that maximizing the interaction of the light beams is necessary to fully utilize the parallelism and tremendous efforts have been made in past decades, the achieved dimensionality of vector-matrix multiplication is very limited due to the difficulty of scaling up a tightly interconnected or highly coupled optical system. Additionally, there is still a lack of a universal photonic computing architecture that can be readily merged with existing computing system to meet the computing power demand of AI techniques. Here, we propose a programmable and reconfigurable photonic linear vector machine to perform only the inner product of two vectors, formed by a series of independent basic computing units, while each unit is just one pair of light-emitter and photodetector. Since there is no interaction among light beams inside, extreme scalability could be achieved by simply duplicating the independent basic computing unit while there is no requirement of large-scale analog-to-digital converter and digital-to-analog converter arrays. Our architecture is inspired by the traditional Chinese Suanpan or abacus and thus is denoted as photonic SUANPAN. As a proof of principle, SUANPAN architecture is implemented with an 8*8 vertical cavity surface emission laser array and an 8*8 MoTe2 two-dimensional material photodetector array. We believe that our proposed photonic SUANPAN is capable of serving as a fundamental linear vector machine that can be readily merged with existing electronic digital computing system and is potential to enhance the computing power for future various AI applications.

physics.optics↗

arXiv2024

16-channel Photonic Solver for Optimization Problems on a Silicon Chip

In this article, we proposed a programmable 16-channel photonic solver for quadratic unconstrained binary optimization (QUBO) problems. The solver is based on a hybrid optoelectronic scheme including a photonic chip and the corresponding electronic driving circuit. The photonic chip is fabricated on silicon on insulator (SOI) substrate and integrates high-speed electro-optic modulators, thermo-optic phase shifters and photodetectors to conduct the 16-dimensional optical vector-matrix multiplication (OVMM). Due to the parallel and low latency propagation of lightwave, the calculation of the QUBO cost function can be accelerated. Besides, the electronic processor is employed to run the heuristic algorithm to search the optimal solution. In the experiment, two 16-dimensional randomly generated QUBO problems are solved with high successful probabilities. To our knowledge, it is the largest scale of programmable and on-chip photonic solver ever reported. Moreover, the computing speed of the OVMM on photonic chip is ~2 TFLOP/s. It shows the potential of fast solving such optimization problems with integrated photonic systems.

cs.ET↗

arXiv2024

Electrically switchable $2^N$-channel wave-front control with N cascaded polarization-dependent metasurfaces

Metasurfaces with tunable functionalities are greatly desired for modern optical system and various applications. To increase the operating channels of polarization-multiplexed metasurfaces, we proposed a structure of N cascaded dual-channel metasurfaces to achieve 2^N electrically switchable functional channels without intrinsic noise or cross-talk. As proof of principles, we have implemented a 3-layer setup to achieve 8 channels. In success, we have demonstrated two typical functionalities of vortex beam generation with switchable topological charge of l=-3 ~ +4 or l=-1~ -8, and beam steering with the deflecting direction switchable in an 8*1 line or a 4*2 grid. We believe that our proposal would provide a practical way to significantly increase the scalability and extend the functionality of polarization-multiplexed metasurfaces, which are potential for the applications of LiDAR, glasses-free 3D display, OAM (de)multiplexing, and varifocal meta-lens.

physics.optics↗

arXiv2024

A Programmable and Reconfigurable Photonic Simulator for Classical XY Models

In this work, we proposed and experimentally demonstrated a photonic simulator for XY models, which is a typical kind of classical spin models. By encoding the XY spins on the phase term of the input light field, the corresponding XY Hamiltonian could be performed on the output light intensities. The simulator is mainly based on a programmable and reconfigurable optical vector-matrix multiplication system, which can map arbitrary XY models within the dimensionality limit. Here, we demonstrated the Berezinskii-Kosterlitz-Thouless transition in a two-dimensional XY model, in which the expectation values of some observables are calculated and consistent with the theory. Besides, we performed the ground state search of two 25-spin XY models with different spin connections and coupling strengths. Our proposal paves a new way to investigate the XY spin system.

physics.optics↗

arXiv2021

Interlayer-Exciton Based Nonvolatile Valleytronic Memory

Analogous to conventional charge-based electronics, valleytronics aims at encoding data via the valley degree of freedom, enabling new routes for information processing. Long-lived interlayer excitons (IXs) in van der Waals heterostructures (HSs) stacked by transition metal dichalcogenides (TMDs) carry valley-polarized information and thus could find promising applications in valleytronic devices. Although great progress of studies on valleytronic devices has been achieved, nonvolatile valleytronic memory, an indispensable device in valleytronics, is still lacking up to date. Here, we demonstrate an IX-based nonvolatile valleytronic memory in a WS2/WSe2 HS. In this device, the emission characteristics of IXs exhibit a large excitonic/valleytronic hysteresis upon cyclic-voltage sweeping, which is ascribed to the chemical-doping of O2/H2O redox couple trapped between the TMDs and substrate. Taking advantage of the large hysteresis, the first nonvolatile valleytronic memory has been successfully made, which shows a good performance with retention time exceeding 60 minutes. These findings open up an avenue for nonvolatile valleytronic memory and could stimulate more investigations on valleytronic devices.

physics.app-ph↗

arXiv2018

Excitonic Complexes and Optical Gain in Two-Dimensional Molybdenum Ditelluride Well below Mott Transition

Strong Coulomb interaction in 2D materials provides unprecedented opportunities for studying many key issues of condensed matter physics, such as co-existence and mutual conversions of excitonic complexes, fundamental optical processes associated with their conversions, and their roles in the celebrated Mott transition. Recent lasing demonstrations in 2D materials raise important questions about the existence and origin of optical gain and possible roles of excitonic complexes. While lasing occurred at extremely low densities dominated by various excitonic complexes, optical gain was observed in the only experiment at densities several orders of magnitude higher, exceeding the Mott density. Here, we report a new gain mechanism involving charged excitons or trions well below the Mott density in 2D molybdenum ditelluride. Our combined experimental and modeling study not only reveals the complex interplays of excitonic complexes well below the Mott transition, but also provides foundation for lasing at extremely low excitation levels, important for future energy efficient photonic devices.

cond-mat.mes-hall↗

arXiv2017

Room-temperature Continuous-wave Lasing from Monolayer Molybdenum Ditelluride with a Silicon Nanobeam Cavity

Monolayer transition metal dichalcogenides (TMDs) provide the most efficient optical gain materials and have potential for making nanolasers with the smallest gain media with lowest energy consumption. But lasing demonstrations based on TMDs have so far been limited to low temperatures. Here, we demonstrate the first room-temperature laser operation in the infrared wavelengths from a monolayer of molybdenum ditelluride on a silicon photonic-crystal nanobeam cavity. Our demonstration is made possible by a unique choice of TMD material with emission wavelength below silicon absorption, combined with the high Q-cavity design by silicon nanobeam. Lasing at 1132 nm is demonstrated at room-temperature pumped by a continuous-wave laser, with a threshold density at 6.6 W/cm2. The room-temperature linewidth of 0.202 nm is the narrowest with the corresponding Q of 5603, the largest observed for a TMD laser. This demonstration establishes TMDs as practical nanolaser materials. The silicon structures provide additional benefits for silicon-compatible nanophotonic applications in the important infrared wavelengths.

cond-mat.mes-hall↗