arXiv subjects

Yoon-Soo Jang

Publications and source records attributed to Yoon-Soo Jang.

7 recordsLinked to original sources

arXiv2025

Fully stabilized 25 GHz frequency comb for frequency calibration of optical spectrum analyzer

Optical spectrometers are widely used in scientific and industrial applications, and precise frequency calibration is essential for ensuring their reliable performance. Traditionally, spectrometers have been calibrated using reference gas cells or reference lamps. However, such conventional methods are not enough to meet the demands for high accuracy and stability. Although frequency-stabilized lasers offer excellent frequency uncertainty, they provide only a single calibration point at a fixed frequency, which is unsuitable for wide-range spectrometer calibration. In this work, we demonstrate a fully stabilized, high-repetition rate electro-optic frequency comb (EO comb) as an absolute frequency reference providing multiple calibration points over a broad spectral range. Our 25 GHz EO comb provides a broadband spectrum spanning from 189.5 THz to 196 THz (corresponding to 1530 nm to 1582 nm), traceable to a frequency standard with a relative standard uncertainty of 10^-13. The well-defined and evenly spaced comb modes can be spectrally resolved by conventional optical spectrometers, enabling wide-range, high-precision frequency calibration. We directly calibrated a commercial spectrometer by referencing its measured frequency values to our well-defined comb modes, thereby evaluating the frequency error with a standard uncertainty of 20 MHz (or relative standard uncertainty of 10^-7), which is limited by the Type A uncertainty (repeatability) of the spectrometer. The proposed method is simple to implement and provides multiple calibration points referenced to the frequency standards over a broad spectral range. This approach improves both the calibration and performance evaluation of spectrometers, and it contributes to the advancement of optical metrology.

physics.optics↗

arXiv2025

Mapping ultrafast timing jitter in dispersion-managed 89 GHz frequency microcombs via self-heterodyne linear interferometry

Laser frequency microcombs provide equidistant coherent frequency markers over a broad spectrum, enabling new frontiers in chip-scale frequency metrology, laser spectroscopy, dense optical communications, precision distance metrology and astronomy. Here we demonstrate thermally stabilized frequency microcomb formation in dispersion-managed microresonators at the different mode-locking states featured with the negligible center frequency shift and broad frequency bandwidth. Subsequently, femtosecond timing jitter in the microcombs are characterized, supported by precision metrology on the timing phase, relative intensity noise and instantaneous linewidth. We contrast the fundamental noise for a range of 89 GHz microcomb states, from soliton crystals to multiple solitons and single-soliton regimes, determined by pump-resonance detuning. For the single-soliton state, we report a close-to-shot-noise-limited relative intensity noise of -153.2 dB/Hz and a quantum-noise-limited timing jitter power spectral density of 0.4 as2/Hz, at 100 kHz offset frequency. This is enabled by a self-heterodyne linear interferometer with 94.2 zs/Hz1/2 timing resolution, 50.6 mHz/Hz1/2 RF frequency resolution, and 6.7 uV/Hz frequency discrimination sensitivity. We achieve an integrated timing jitter at 1.7 fs, integrated from 10 kHz to 1 MHz. Measuring and understanding the fundamental noise parameters in these high-clock-rate frequency microcombs are essential to advance soliton physics and precision microwave-optical clockwork.

physics.optics↗

arXiv2025

Approaching the quantum-limited precision in frequency-comb-based spectral interferometry for length measurements

Over the last two decades, frequency combs have brought breakthroughs in length metrology with traceability to length standards. In particular, frequency-comb-based spectral interferometry is regarded as a promising technology for next-generation length standards. However, to achieve this, the nanometer-level precision inherent in laser interferometer is required. Here, we report distance measurements by a frequency-comb-based spectral interferometry with sub-nm precision close to a standard quantum limit. The measurement precision was confirmed as 0.67 nm at an averaging time of 25 us. The measurement sensitivity was found to be 4.5 10-12m/Hz1/2, close to the quantum-limit. As a practical example of observing precise physical phenomena, we demonstrated measurements of acoustic-wave-induced vibration and laser eavesdropping. Our study will be an important step toward the practical realization of upcoming length standards.

physics.optics↗

arXiv2024

Remote picometric acoustic sensing via ultrastable laser interferometry

Acoustic detection has many applications across science and technology, from medical to imaging and communications. However, most acoustic sensors have a common limitation in that the detection must be near the acoustic source. Alternatively laser interferometry with picometer-scale motional displacement detection can rapidly and precisely measure sound induced minute vibrations on remote surfaces. Here we demonstrate the feasibility of sound detection up to 100 kHz at remote sites with ~ 60 m of optical path length via laser homodyne interferometry. Based on our ultrastable Hz-linewidth laser with 10-15 fractional stability, our laser interferometer achieves 0.5 pm/Hz1/2 displacement sensitivity near 10 kHz, bounded only by laser frequency noise over 10 kHz. Between 140 Hz to 15 kHz, we achieve a homodyne acoustic sensing sensitivity of sub-nm/Pa across our conversational frequency overtones. The minimal sound pressure detectable over 60 m of optical path length is ~ 2 mPa, with dynamic ranges over 100 dB. With the demonstrated standoff picometric distance metrology, we successfully detected and reconstructed musical scores of normal conversational volumes with high fidelity. The acoustic detection via this precision laser interferometer could be applied to selective area sound sensing for remote acoustic metrology, optomechanical vibrational motion sensing and ultrasensitive optical microphones at the laser frequency noise limits.

physics.optics↗

arXiv2023

Programmable spectral shaping to improve the measurement precision of frequency comb mode-resolved spectral interferometric ranging

Comb-mode resolved spectral domain interferometry (CORE-SDI), which is capable of measuring length of kilometers or more with precision on the order of nanometers, is considered to be a promising technology for next-generation length standards, replacing laser displacement interferometers. In this study, we aim to improve the measurement precision of CORE-SDI using programmable spectral shaping. We report the generation of effectively broad and symmetric light sources through the programmable spectral shaping. The light source used here was generated by the spectrally-broadened electro-optic comb with a repetition rate of 17.5 GHz. Through the programmable spectral shaping, the optical spectrum was flattened within 1 dB, resulting in a square-shaped optical spectrum. As a result, the 3-dB spectral width was extended from 1.15 THz to 6.7 THz. We performed a comparison between the measurement results of various spectrum shapes. We confirmed an improvement in the measurement precision from 69 nm to 6 nm, which was also corroborated by numerical simulations. We believe that this study on enhancing the measurement precision of CORE-SDI through the proposed spectral shaping will make a significant contribution to reducing the measurement uncertainty of future CORE-SDI systems, thereby advancing the development of next-generation length standards.

physics.optics↗

arXiv2020

Nanometric precision distance metrology via chip-scale soliton microcombs

Laser interferometry serves a fundamental role in science and technology, assisting precision metrology and dimensional length measurement. During the past decade, laser frequency combs - a coherent optical-microwave frequency ruler over a broad spectral range with traceability to time-frequency standards - have contributed pivotal roles in laser dimensional metrology with ever-growing demands in measurement precision. Here we report spectrally-resolved laser dimensional metrology via a soliton frequency microcomb, with nanometric-scale precision. Spectral interferometry provides information on the optical time-of-flight signature, and the large free-spectral range and high-coherence of the microcomb enables tooth-resolved and high-visibility interferograms that can be directly readout with optical spectrum instrumentation. We employ a hybrid timing signal from comb-line homodyne interferometry and microcomb spectrally-resolved interferometry - all from the same spectral interferogram. Our combined soliton and homodyne architecture demonstrates a 3-nm repeatability achieved via homodyne interferometry, and over 1,000-seconds stability in the long-term precision metrology at the white noise limits.

physics.ins-det↗

arXiv2019

Comb-rooted multi-channel synthesis of ultra-narrow optical frequencies of few Hz linewidth

We report a multi-channel optical frequency synthesizer developed to generate extremely stable continuous wave lasers directly out of the optical comb of an Er-doped fiber oscillator. Being stabilized to a high-finesse cavity with a fractional frequency stability of $3.8\times10^{-15}$ at 0.1 s, the comb-rooted synthesizer produces multiple optical frequencies of ultra-narrow linewidth of 1.0 Hz at 1 s concurrently with an output power of tens of mW per each channel. Diode-based stimulated emission by injection locking is a key mechanism that allows comb frequency modes to sprout up with sufficient power amplification but no loss of original comb frequency stability. Channel frequencies are individually selectable with a 0.1 GHz increment over the entire comb bandwidth spanning 4.25 THz around a 1550 nm center wavelength. A series of out-of-loop test results is discussed to demonstrate that the synthesizer is able to provide stable optical frequencies with the potential for advancing diverse ultra-precision applications such as optical clocks comparison, atomic line spectroscopy, photonic microwaves generation, and coherent optical telecommunications.

physics.optics↗