arXiv subjects

Yoshiharu Krockenberger

Publications and source records attributed to Yoshiharu Krockenberger.

29 records · Page 2Linked to original sources

arXiv2021

Superconductivity in infinite-layer CaCuO2-brownmillerite Ca2Fe2O5 superlattices

High-temperature cuprate superconductors have naturally a superlattice structure. Infinite-layer CaCuO2 is the common ingredient of cuprates with superconducting transition temperatures above 100 K. However, infinite-layer CaCuO2 by itself does not superconduct. Here we show that superconductivity emerges in artificial superlattices built from infinite-layer CaCuO2 and brownmillerite Ca2Fe2O5 grown by molecular beam epitaxy. X-ray diffraction and electron microscopy characterizations showed that the crystal quality of the infinite-layer CaCuO2 in the superlattices significantly improved compared to bare thin-films of CaCuO2. We found that the induction of superconductivity in [(CaCuO2)n(Ca2Fe2O5)m]N superlattices is also subject to the oxidizing environment used during the cool-down procedure and therefore to a minimization of oxygen vacancies within the CuO2 planes. The inserted Ca2Fe2O5 layers buffer charge imbalances triggered by point defect formation during growth, minimizing cationic defects in the infinite-layer CaCuO2 layers thus stabilizing monolithic infinite-layer CaCuO2 slabs; embedding CaCuO2 within a superlattice enables extended two-dimensional CuO2 planes and therefore superconductivity while Ca2Fe2O5 serves similar to the charge-reservoir layers in the cuprate superconductors synthesized from incongruent melts.

cond-mat.supr-con↗

arXiv2021

Single-domain perpendicular magnetization induced by the coherent O 2p-Ru 4d hybridized state in an ultra-high-quality SrRuO3 film

We investigated the Ru 4d and O 2p electronic structure and magnetic properties of an ultra-high-quality SrRuO3 film on SrTiO3 grown by machine-learning-assisted molecular beam epitaxy. The high itinerancy and long quantum lifetimes of the quasiparticles in the Ru 4d t2g-O 2p hybridized valence band are confirmed by observing the prominent well-screened peak in the Ru 3d core-level photoemission spectrum, the coherent peak near the Fermi energy in the valence band spectrum, and quantum oscillations in the resistivity. The element-specific magnetic properties and the hybridization between the Ru 4d and O 2p orbitals were characterized by Ru M2,3-edge and O K-edge soft X-ray absorption spectroscopy and X-ray magnetic circular dichroism measurements. The ultra-high-quality SrRuO3 film with the residual resistivity ratio of 86 shows the large orbital magnetic moment of oxygen ions induced by the strong orbital hybridization of the O 2p states with the spin-polarized Ru 4d t2g states. The film also shows single-domain perpendicular magnetization with an almost ideal remanent magnetization ratio of 0.97. These results provide detailed insights into the relevance between orbital hybridization and the perpendicular magnetic anisotropy in SrRuO3/SrTiO3 systems.

cond-mat.mtrl-sci↗

arXiv2021

Wide-range epitaxial strain control of electrical and magnetic properties in high-quality SrRuO3 films

Epitaxial strain in 4d ferromagnet SrRuO3 films is directly linked to the physical properties through the strong coupling between lattices, electrons, and spins. It provides an excellent opportunity to tune the functionalities of SrRuO3 in electronic and spintronic devices. However, a thorough understanding of the epitaxial strain effect in SrRuO3 has remained elusive due to the lack of systematic studies. This study demonstrates wide-range epitaxial strain control of electrical and magnetic properties in high-quality SrRuO3 films. The epitaxial strain was imposed by cubic or pseudocubic perovskite substrates having a lattice mismatch of -1.6 to 2.3% with reference to bulk SrRuO3. The Poisson ratio, which describes the two orthogonal distortions due to the substrate clamping effect, is estimated to be 0.33. The Curie temperature (TC) and residual resistivity ratios of the series of films are higher than or comparable to the highest reported values for SrRuO3 on each substrate, confirming the high crystalline quality of the films. A TC of 169 K is achieved in a tensile-strained SrRuO3 film on the DyScO3 (110) substrate, which is the highest value ever reported for SrRuO3. The TC (146-169 K), magnetic anisotropy (perpendicular or in-plane magnetic easy axis), and metallic conduction (residual resistivity at 2 K of 2.10 - 373 μΩcm) of SrRuO3 are widely controlled by epitaxial strain. These results provide guidelines to design SrRuO3-based heterostructures for device applications.

cond-mat.mtrl-sci↗

arXiv2021

Structural and transport properties of highly Ru-deficient SrRu0.7O3 thin films prepared by molecular beam epitaxy: comparison with stoichiometric SrRuO3

We investigate structural and transport properties of highly Ru-deficient SrRu0.7O3 thin films prepared by molecular beam epitaxy on (001) SrTiO3 substrates. To distinguish the influence of the two types of disorders in the films, Ru vacancies within lattices and disorders near the interface, SrRu0.7O3 thin films with various thicknesses (t = 1-60 nm) were prepared. It was found that the influence of the former dominates the electrical and magnetic properties when t > 5-10 nm, while that of the latter does when t < 5-10 nm. Structural characterizations revealed that the crystallinity, in terms of the Sr and O sublattices, of SrRu0.7O3 thin films, is as high as that of the ultrahigh-quality SrRuO3 ones. The Curie temperature (TC) analysis elucidated that SrRu0.7O3 (TC = 140 K) is a material distinct from SrRuO3 (TC = 150 K). Despite the large Ru deficiency (30%), the SrRu0.7O3 films showed metallic conduction when t > 5 nm. In high-field magnetoresistance measurements, the fascinating phenomenon of Weyl fermion transport was not observed for the SrRu0.7O3 thin films irrespective of thickness, which is in contrast to the stoichiometric SrRuO3 films. The (magneto)transport properties suggest that a picture of carrier scattering due to the Ru vacancies is appropriate for SrRu0.7O3, and also that proper stoichiometry control is a prerequisite to utilizing the full potential of SrRuO3 as a magnetic Weyl semimetal and two-dimensional spin-polarized system. Nevertheless, the large tolerance in Ru composition (30 %) to metallic conduction is advantageous for some practical applications where SrRu1-xO3 is exploited as an epitaxial conducting layer.

cond-mat.mtrl-sci↗

arXiv2020

Thickness-dependent quantum transport of Weyl fermions in ultra-high-quality SrRuO3 films

The recent observation of Weyl fermions in the itinerant 4d ferromagnetic perovskite SrRuO3 points to this material being a good platform for exploring novel physics related to a pair of Weyl nodes in epitaxial heterostructures. In this letter, we report the thickness-dependent magnetotransport properties of ultra-high-quality epitaxial SrRuO3 films grown under optimized conditions on SrTiO3 substrates. Signatures of Weyl fermion transport, i.e., unsaturated linear positive magnetoresistance accompanied by a quantum oscillation having a π Berry phase, were observed in films with thicknesses as small as 10 nm. Residual resistivity increased with decreasing film thickness, indicating disorder near the interface between SrRuO3 and the SrTiO3 substrate. Since this disorder affects the magnetic and electrical properties of the films, the Curie temperature decreases and the coercive field increases with decreasing thickness. Thickness-dependent magnetotransport measurements revealed that the threshold residual resistivity ratio (RRR) to observe Weyl fermion transport is 21. These results provide guidelines for realizing quantum transport of Weyl fermions in SrRuO3 near heterointerfaces.

cond-mat.mtrl-sci↗

arXiv2020

Quantum transport evidence of Weyl fermions in an epitaxial ferromagnetic oxide

Magnetic Weyl fermions, which occur in magnets, have novel transport phenomena related to pairs of Weyl nodes, and they are, of both, scientific and technological interest, with the potential for use in high-performance electronics, spintronics and quantum computing. Although magnetic Weyl fermions have been predicted to exist in various oxides, evidence for their existence in oxide materials remains elusive. SrRuO3, a 4d ferromagnetic metal often used as an epitaxial conducting layer in oxide heterostructures, provides a promising opportunity to seek for the existence of magnetic Weyl fermions. Advanced oxide thin film preparation techniques, driven by machine learning technologies, may allow access to such topological matter. Here we show direct quantum transport evidence of magnetic Weyl fermions in an epitaxial ferromagnetic oxide SrRuO3: unsaturated linear positive magnetoresistance (MR), chiral-anomaly-induced negative MR, Pi Berry phase accumulated along cyclotron orbits, light cyclotron masses and high quantum mobility of about 10000 cm2/Vs. We employed machine-learning-assisted molecular beam epitaxy (MBE) to synthesize SrRuO3 films whose quality is sufficiently high to probe their intrinsic quantum transport properties. We also clarified the disorder dependence of the transport of the magnetic Weyl fermions, and provided a brand-new diagram for the Weyl transport, which gives a clear guideline for accessing the topologically nontrivial transport phenomena. Our results establish SrRuO3 as a magnetic Weyl semimetal and topological oxide electronics as a new research field.

cond-mat.mtrl-sci↗

arXiv2019

Machine-learning-assisted thin-film growth: Bayesian optimization in molecular beam epitaxy of SrRuO3 thin films

Materials informatics exploiting machine learning techniques, e.g., Bayesian optimization (BO), has the potential to offer high-throughput optimization of thin-film growth conditions through incremental updates of machine learning models in accordance with newly measured data. Here, we demonstrated BO-based molecular beam epitaxy (MBE) of SrRuO3, one of the most-intensively studied materials in the research field of oxide electronics, mainly owing to its unique nature as a ferromagnetic metal. To simplify the intricate search space of entangled growth conditions, we ran the BO for a single condition while keeping the other conditions fixed. As a result, high-crystalline-quality SrRuO3 film exhibiting a high residual resistivity ratio (RRR) of over 50 as well as strong perpendicular magnetic anisotropy was developed in only 24 MBE growth runs in which the Ru flux rate, growth temperature, and O3-nozzle-to-substrate distance were optimized. Our BO-based search method provides an efficient experimental design that is not as dependent on the experience and skills of individual researchers, and it reduces experimental time and cost, which will accelerate materials research.

cond-mat.mtrl-sci↗

arXiv2019

Evolution of charge order topology across a magnetic phase transition in cuprate superconductors

Charge order is now accepted as an integral constituent of cuprate high-temperature superconductors, one that is intimately related to other instabilities in the phase diagram including antiferromagnetism and superconductivity. Unlike nesting-induced Peierls-like density waves, the charge correlations in the CuO2 planes have been predicted to display a rich momentum space topology depending on the detailed fermiology of the system. However, to date charge order has only been observed along the high-symmetry Cu-O bond directions. Here, using resonant soft X-ray scattering, we investigate the evolution of the full momentum space topology of charge correlations in Ln2CuO4 (Ln=Nd, Pr) as a function of intrinsic electron doping. We report that, upon electron doping the parent Mott insulator, charge correlations first emerge in a hitherto-unobserved form, with full (Cinf) rotational symmetry in momentum-space. At higher doping levels, the orientation of charge correlations is sharply locked to the Cu-O bond high-symmetry directions, restoring a more conventional bidirectional charge order with enhanced correlation lengths. Through charge susceptibility calculations, we closely reproduce the drastic evolution in the topology of charge correlations across an antiferromagnetic quantum phase transition, highlighting the interplay between spin and charge degrees of freedom in electron-doped cuprates. Finally, using the established link between charge correlations and the underlying fermiology, we propose a revised phase diagram of Ln2CuO4 with a superconducting region extending toward the Mott limit.

cond-mat.str-el↗

arXiv2018

Ferromagnetism above 1000 K in highly cation-ordered double-perovskite insulator Sr3OsO6

Magnetic insulators have been intensively studied for over 100 years, and they, in particular ferrites, are considered to be the cradle of magnetic exchange interactions in solids. Their wide range of applications include microwave devices and permanent magnets . They are also suitable for spintronic devices owing to their high resistivity, low magnetic damping, and spin-dependent tunneling probabilities. The Curie temperature is the crucial factor determining the temperature range in which any ferri/ferromagnetic system remains stable. However, the record Curie temperature has stood for over eight decades in insulators and oxides (943 K for spinel ferrite LiFe5O8). Here we show that a highly B-site ordered double-perovskite, Sr2(SrOs)O6 (Sr3OsO6), surpasses this long standing Curie temperature record by more than 100 K. We revealed this B-site ordering by atomic-resolution scanning transmission electron microscopy. The density functional theory (DFT) calculations suggest that the large spin-orbit coupling (SOC) of Os6+ 5d2 orbitals drives the system toward a Jeff = 3/2 ferromagnetic (FM) insulating state. Moreover, the Sr3OsO6 is the first epitaxially grown osmate, which means it is highly compatible with device fabrication processes and thus promising for spintronic applications.

cond-mat.mtrl-sci↗

arXiv2016

Shubnikov-de Haas quantum oscilations reveal a reconstructed Fermi surface near optimal doping in a thin film of the cuprate superconductor Pr$_{1.86}$Ce$_{0.14}$CuO$_{4\pmδ}$

We study magnetotransport properties of the electron-doped superconductor Pr$_{2-x}$Ce$_x$CuO$_{4\pmδ}$ with $x$ = 0.14 in magnetic fields up to 92~T, and observe Shubnikov de-Haas magnetic quantum oscillations. The oscillations display a single frequency $F$=255$\pm$10~T, indicating a small Fermi pocket that is $\sim$~1\% of the two-dimensional Brillouin zone and consistent with a Fermi surface reconstructed from the large hole-like cylinder predicted for these layered materials. Despite the low nominal doping, all electronic properties including the effective mass and Hall effect are consistent with overdoped compounds. Our study demonstrates that the exceptional chemical control afforded by high quality thin films will enable Fermi surface studies deep into the overdoped cuprate phase diagram.

cond-mat.supr-con↗

arXiv2015

Quantum oscillations suggest hidden quantum phase transition in the cuprate superconductor Pr$_{2}$CuO$_{4\pmδ}$

For both electron- and hole-doped cuprates, superconductivity appears in the vicinity of suppressed broken symmetry order, suggesting that quantum criticality plays a vital role in the physics of these systems. A confounding factor in identifying the role of quantum criticality in the electron-doped systems is the competing influence of chemical doping and oxygen stoichiometry. Using high quality thin films of Pr$_{2}$CuO$_{4\pmδ}$, we tune superconductivity and uncover the influence of quantum criticality without Ce substitution. We observe magnetic quantum oscillations that are consistent with the presence of small hole-like Fermi surface pockets, and a large mass enhancement near the suppression of superconductivity. Tuning these materials using only oxygen stoichiometry allows the observation of quantum oscillations and provides a new axis with which to explore the physics underlying the electron-doped side of the cuprate phase diagram.

cond-mat.supr-con↗