arXiv subjects
Publications and source records attributed to Yoshinobu Kuramashi.
We investigate the entanglement and Rényi entropies for the (1+1)-dimensional O(3) nonlinear sigma model using the tensor renormalization group method. The central charge is determined from the asymptotic scaling properties of both entropies. We also examine the consistency between the entanglement entropy and the $n$th-order Rényi entropy with $n\rightarrow 1$.
We apply the tensor renormalization group method to the (1+1)-dimensional SU(2) principal chiral model at finite chemical potential with the use of the Gauss-Legendre quadrature to discretize the SU(2) Lie group. The internal energy at vanishing chemical potential $μ=0$ shows good consistency with the prediction of the strong and weak coupling expansions. This indicates an effectiveness of the Gauss-Legendre quadrature for the partitioning of the SU(2) Lie group. In the finite density region with $μ\ne 0$ at the strong coupling we observe the Silver-Blaze phenomenon for the number density.
The generation of ensembles of gauge configurations is a considerable expense. The preservation and curation of these ensembles constitutes a valuable shared resource for the lattice field theory community. The organizers of Lattice 2022 dedicated a parallel session to the presentation of gauge ensembles and their generation, plans for ensemble publication and data management/storage activities of different collaborations. A summary of the twelve contributions is presented here.
We calculate the kaon semileptonic form factors using the two sets of the PACS10 configuration, whose physical volumes are more than (10 fm)$^4$ at the physical point. The lattice spacings are 0.063 and 0.085 fm. The configurations were generated using the Iwasaki gauge action and $N_f=2+1$ stout-smeared nonperturbatively $O(a)$-improved Wilson quark action. From the momentum transfer dependence of the form factors, we evaluate the slope and curvature for the form factors at the zero momentum transfer. Furthermore, we calculate the phase space factor, which is used to obtain $|V_{us}|$ through the kaon semileptonic decay. These results are compared with previous lattice results and experimental values.
We present updated results for the form factors of the kaon semileptonic $(K_{\ell 3})$ decay process calculated with $N_f = 2 + 1$ nonperturbatively $O(a)$-improved Wilson quark action and Iwasaki gauge action at the physical point on large volumes of more than (10 fm)$^4$. In addition to our previous calculation at the lattice spacing $a = 0.085$ fm, we perform a calculation at the second lattice spacing of $0.063$ fm. Using the results for the form factors extracted from 3-point functions with the local and also conserved vector currents at the two lattice spacings, continuum extrapolation and interpolation of the momentum transfer are carried out simultaneously to obtain the value of the form factor $f_+(0)$ at the zero momentum transfer in the continuum limit. After investigation of stability of $f_+(0)$ against several fit forms and different data, we obtain $f_+(0) = 0.9615(10)(^{+47}_{\ -3})(5)$, where the first, second, and third errors are statistical, systematic errors from choice of the fit forms and isospin breaking effect, respectively. Combining our value of $f_+(0)$ and experimental input of the $K_{\ell 3}$ decay, one of the Cabibbo-Kobayashi-Maskawa matrix elements $|V_{us}|$ is determined as $|V_{us}| = 0.2252(^{\ +5}_{-12})$, whose error contains the experimental one as well as that in the lattice calculation. This value is reasonably consistent with the ones determined from recent lattice QCD results of $f_+(0)$ and also the one determined through the kaon leptonic decay process. We observe some tension between our value and $|V_{us}|$ evaluated from the unitarity of the CKM matrix with $|V_{ud}|$, while it depends on the size of the error of $|V_{ud}|$. It is also found that $|V_{us}|$ determined with our phase space integrals through six $K_{\ell 3}$ decay processes is consistent with the above one using $f_+(0)$.
We present results for the axial charge and root-mean-square (RMS) radii of the nucleon obtained from 2+1 flavor lattice QCD at the physical point with a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared $O(a)$ improved Wilson-clover quark action and Iwasaki gauge action at $β$ = 1.82 and 2.00 corresponding to lattice spacings of 0.085 fm and 0.063 fm respectively. We first evaluate the value of $g_A/g_V$ , which is not renormalized in the continuum limit and thus ends up with the renormalized axial charge. Moreover, we also calculate the nucleon elastic form factors and determine three kinds of isovector RMS radii such as electric, magnetic and axial ones at the two lattice spacings. We finally discuss the discretization uncertainties on renormalized axial charge and isovector RMS radii towards the continuum limit.
We present results for the scalar and tensor isovector-couplings ($g_S$ and $g_T$) of the nucleon measured at the physical point ($M_π=135$ MeV) with a single lattice spacing of $0.085\ \mathrm{fm}$ in 2+1 flavor QCD. Our calculations are carried out with two ensembles of gauge configurations generated by the PACS Collaboration with nonperturbatively ${\cal O}(a)$ improved Wilson quark action and Iwasaki gauge action on $(10.9\ {\rm fm})^4$ and $(5.5\ {\rm fm})^4$ lattices, where the finite-size effect on the nucleon mass was not shown at the level of the statistical precision less than 0.5%. We compute the nucleon three-point correlation functions in the vector, axial, scalar, and tensor channels. We confirm that our previous result of the nucleon axial coupling on the large spatial volume of $(10.9\ {\rm fm})^4$ has no finite-size effect at the level of the statistical precision of 1.9%. For the renormalization, we first renormalize $g_S$ and $g_T$ nonperturbatively using the RI/SMOM$_{(γ_μ)}$ scheme, a variant of Rome-Southampton RI/MOM scheme with reduced systematic errors, as the intermediate scheme. We evaluate our final results at the renormalization scale of 2 GeV in the $\overline{\rm MS}$ scheme through matching procedure between the RI/SMOM$_{(γ_μ)}$ and $\overline{\rm MS}$ schemes with the help of perturbation theory, and then obtain $g_S=0.927(71)_{\rm stat}(22)_{\rm syst}$ and $g_T=1.036(6)_{\rm stat}(20)_{\rm syst}$.
We investigate the critical endpoints of the (3+1)-dimensional $Z_2$ gauge-Higgs model at finite density together with the (2+1)-dimensional one at zero density as a benchmark using the tensor renormalization group method. We focus on the phase transition between the Higgs phase and the confinement phase at finite chemical potential along the critical end line. In the (2+1)-dimensional model, the resulting endpoint is consistent with a recent numerical estimate by the Monte Carlo simulation. In the (3+1)-dimensional case, however, the location of the critical endpoint shows disagreement with the known estimates by the mean-field approximation and the Monte Carlo studies. This is the first application of the tensor renormalization group method to a four-dimensional lattice gauge theory and a key stepping stone toward the future investigation of the phase structure of the finite density QCD.
We investigate the doping-driven metal-insulator transition of the (2+1)-dimensional Hubbard model in the path-integral formalism with the tensor renormalization group method. We calculate the electron density $\langle n\rangle$ as a function of the chemical potential $μ$ choosing three values of the Coulomb potential with $U=80$, $8$, and $2$ as representative cases of the strong, intermediate, and weak couplings. We have determined the critical chemical potential at each $U$, where the Hubbard model undergoes the metal-insulator transition from the half-filling plateau with $\langle n\rangle=1$ to the metallic state with $\langle n\rangle > 1$. Our results indicate that the model exhibits the metal-insulator transition over the vast region of the finite coupling $U$.
We present preliminary results for the axial, scalar and tensor charges of the nucleon measured in 2+1 flavor QCD with the physical light quarks ($m_π=135$ MeV). Our simulations are carried out with gauge configurations generated by the PACS Collaboration with the stout-smeared $O(a)$ improved Wilson fermions and Iwasaki gauge action at a single lattice spacing of $0.085\ (\mathrm{fm})$. There are two lattice ensembles of the PACS gauge configurations, which have physical lattice sizes over $(10\ \mathrm{fm})^4$ and $(5\ \mathrm{fm})^4$, respectively. We compute the nucleon three-point correlation functions in the axial, scalar, and tensor channels. For the renormalization, we use the Rome-Southampton method as the intermediate scheme in order to evaluate the renormalization constants for the scalar and tensor currents in fully nonperturbative manner. We then evaluate the renormalized values of the scalar and tensor charges ($g_S$ and $g_T$) in the $\overline{\rm MS}$ scheme at the renormalization scale of 2 GeV with a help of the continuum perturbation theory for the matching between two schemes. We compare our preliminary results of $g_S$ and $g_T$ with those of other collaboration results.
We present results for the nucleon structure functions and form factors obtained from 2+1 flavor lattice QCD with physical light quark masses ($m_π=135$ MeV) in a large spatial extent of about 10 fm. Our calculations are performed with the PACS10 gauge configurations generated by the PACS Collaboration with the six stout-smeared ${\mathscr{O}}(a)$ improved Wilson-clover quark action and Iwasaki gauge action at $β=1.82$ and $2.00$ corresponding to lattice spacings of $0.085$ fm and $0.064$ fm respectively. The lower moments of structure functions, $\langle x \rangle_{u-d}$ and $\langle x \rangle_{Δu - Δd}$ given by the twist-2 operators being properly renormalized, are evaluated in the $\overline{\rm MS}$ scheme at the renormalization scale of 2 GeV only at $β=1.82$, since the renormalization factors at $β=2.00$ have not yet determined nonperturbatively in the RI/MOM scheme. Instead, at two lattice spacings, we evaluate appropriate ratios of $g_{A}/g_{V}$ and $\langle x \rangle_{u-d}/\langle x \rangle_{Δu -Δd}$, which are not renormalized in the continuum limit. These quantities thus can be directly compared with the experimental data without the renormalization.
We report recent progress on the application of the tensor renormalization group (TRG) to quantum field theories pursued by the Tsukuba group. We explain how to treat the scalar, fermion, and gauge theories with the TRG method presenting the results for the phase transitions in the (3+1)-dimensional ((3+1)$d$) complex $ϕ^4$ theory at finite density, (1+1)$d$ pure U(1) lattice gauge theory with a $θ$ term, (3+1)$d$ Nambu--Jona-Lasinio model at finite density and (1+1)$d$ and (2+1)$d$ Hubbard models at an arbitrary chemical potential. It is demonstrated that the TRG method is free from the sign problem in practical calculations and applicable to the four-dimensional models.
We present preliminary results for the kaon semileptonic form factors using the PACS10 configurations, whose physical volume is more than (10 fm)$^3$ at the physical point with the lattice spacings of 0.085 and 0.064 fm. The configurations were generated using the Iwasaki gauge action and $N_f=2+1$ stout-smeared Clover quark action. For the continuum extrapolation, we calculate the form factors with the local and conserved vector currents. The form factors in the two lattice spacings are extrapolated to the continuum limit using a fit function based on the NLO SU(3) ChPT formula with terms corresponding to finite lattice spacing effects. The value of $|V_{us}|$ is determined using our preliminary result of the form factor at the zero momentum transfer in the continuum limit. The result is compared with recent lattice results, and also predictions of the standard model from the unitarity of the Cabibbo-Kobayashi-Maskawa (CKM) matrix.
We investigate the phase transition of the four-dimensional single-component $ϕ^4$ theory on the lattice using the tensor renormalization group method. We have examined the hopping parameter dependence of the bond energy and the vacuum condensation of the scalar field $\langleϕ\rangle$ at a finite quartic coupling $λ$ on large volumes up to $V=1024^4$ in order to detect the spontaneous breaking of the $\mathbb{Z}_2$ symmetry. Our results show that the system undergoes the weak first-order phase transition at a certain critical value of the hopping parameter. We also make a comparative study of the three-dimensional $ϕ^4$ theory and find that the properties of the phase transition are consistent with the universality class of the three-dimensional Ising model.
We present a direct calculation for the first derivative of the isovector nucleon form factors with respect to the momentum transfer $q^2$ using the lower moments of the nucleon 3-point function in the coordinate space. Our numerical simulations are performed using the $N_f = 2 + 1$ nonperturbatively $O(a)$-improved Wilson quark action and Iwasaki gauge action near the physical point, corresponding to the pion mass $M_π=138$ MeV, on a (5.5 fm)$^4$ lattice at a single lattice spacing of $a = 0.085$ fm. In the momentum derivative approach, we can directly evaluate the mean square radii for the electric, magnetic, and axial-vector form factors, and also the magnetic moment without the $q^2$ extrapolation to the zero momentum point. These results are compared with the ones determined by the standard method, where the $q^2$ extrapolations of the corresponding form factors are carried out by fitting models. We find that the new results from the momentum derivative method are obtained with a larger statistical error than the standard method, but with a smaller systematic error associated with the data analysis. Within the total error range of the statistical and systematic errors combined, the two results are in good agreement. On the other hand, two variations of the momentum derivative of the induced pseudoscalar form factor at the zero momentum point show some discrepancy. It seems to be caused by a finite volume effect, since a similar trend is not observed on a large volume, but seen on a small volume in our pilot calculations at a heavier pion mass of $M_π= 510$ MeV. Furthermore, we discuss an equivalence between the momentum derivative method and the similar approach with the point splitting vector current.
We investigate the metal-insulator transition of the (1+1)-dimensional Hubbard model in the path-integral formalism with the tensor renormalization group method. The critical chemical potential $μ_{\rm c}$ and the critical exponent $ν$ are determined from the $μ$ dependence of the electron density in the thermodynamic limit. Our results for $μ_{\rm c}$ and $ν$ show consistency with an exact solution based on the Bethe ansatz. Our encouraging results indicate the applicability of the tensor renormalization group method to the analysis of higher-dimensional Hubbard models.
We analyze the chiral phase transition of the Nambu--Jona-Lasinio model in the cold and dense region on the lattice developing the Grassmann version of the anisotropic tensor renormalization group algorithm. The model is formulated with the Kogut--Susskind fermion action. We use the chiral condensate as an order parameter to investigate the restoration of the chiral symmetry. The first-order chiral phase transition is clearly observed in the dense region at vanishing temperature with $μ/T\sim O(10^3)$ on a large volume of $V=1024^4$. We also present the results for the equation of state.
We present the nucleon form factors and root-mean-square (RMS) radii measured on a (10.8 fm$)^4$ lattice at the physical point. We compute the form factors at small momentum transfer region in $q^2\le 0.102$ GeV$^2$ with the standard plateau method choosing four source-sink separation times $t_{\rm sep}$ from 0.84 to 1.35 fm to examine the possible excited state contamination. We obtain the electric and magnetic form factors and their RMS radii for not only the isovector channel but also the proton and neutron ones without the disconnected diagram. We also obtain the axial-vector coupling and the axial radius from the axial-vector form factor. We find that these three form factors do not show large $t_{\rm sep}$ dependence in our lattice setup. On the other hand, the induced pseudoscalar and pseudoscalar form factors show the clear effects of the excited state contamination, which affect the generalized Goldberger-Treiman relation.