arXiv subjects

Yoshitomo Okawachi

Publications and source records attributed to Yoshitomo Okawachi.

At least 19 recordsLinked to original sources

arXiv2024

Nonlinear Dynamics of Coupled-Resonator Kerr-Combs

The nonlinear interaction of a microresonator pumped by a laser has revealed complex dynamics including soliton formation and chaos. Initial studies of coupled-resonator systems reveal even more complicated dynamics that can lead to deterministic modelocking and efficient comb generation. Here we perform theoretical analysis and experiments that provide insight into the dynamical behavior of coupled-resonator systems operating in the normal group-velocity-dispersion regime. Our stability analysis and simulations reveal that the strong mode-coupling regime, which gives rise to spectrally-broad comb states, can lead to an instability mechanism in the auxiliary resonator that destabilizes the comb state and prevents mode-locking. We find that this instability can be suppressed by introducing loss in the auxiliary resonator. We investigate the stability of both single- and multi-pulse solutions and verify our theoretical predictions by performing experiments in a silicon-nitride platform. Our results provide an understanding for accessing broad, efficient, relatively flat high-power mode-locked combs for numerous applications in spectroscopy, time-frequency metrology, and data communications.

physics.optics↗

arXiv2024

Overcoming stress limitations in SiN nonlinear photonics via a bilayer waveguide

Silicon nitride (SiN) formed via low pressure chemical vapor deposition (LPCVD) is an ideal material platform for on-chip nonlinear photonics owing to its low propagation loss and competitive nonlinear index. Despite this, LPCVD SiN is restricted in its scalability due to the film stress when high thicknesses, required for nonlinear dispersion engineering, are deposited. This stress in turn leads to film cracking and makes integrating such films in silicon foundries challenging. To overcome this limitation, we propose a bilayer waveguide scheme comprised of a thin LPCVD SiN layer underneath a low-stress and low-index PECVD SiN layer. We show group velocity dispersion tuning at 1550nm without concern for filmcracking while enabling low loss resonators with intrinsic quality factors above 1 million. Finally, we demonstrate a locked, normal dispersion Kerr frequency comb with our bilayer waveguide resonators spanning 120nm in the c-band with an on-chip pump power of 350mW.

physics.optics↗

arXiv2023

All-optical frequency division on-chip using a single laser

The generation of spectrally pure high-frequency microwave signals is a critical functionality in fundamental and applied sciences, including metrology and communications. The development of optical frequency combs has enabled the powerful technique of optical frequency division (OFD) to produce microwave oscillations of the highest quality. The approaches for OFD demonstrated to date demand multiple lasers with space- and energy-consuming optical stabilization and electronic feedback components, resulting in device footprints incompatible with integration into a compact and robust photonic platform. Here, we demonstrate all-optical OFD on a single photonic chip driven with a single continuous-wave laser. We generate a dual-point frequency reference using the beat frequency of the signal and idler fields from a microresonator-based optical parametric oscillator (OPO), which achieves high phase stability due to the inherently strong signal-idler frequency correlations. We implement OFD by optically injecting the signal and idler fields from the OPO to a Kerr-comb microresonator on the same chip. We show that the two distinct dynamical states of Kerr cavities can be passively synchronized, allowing broadband frequency locking of the comb state, which transfers the stability of the OPO frequencies to the repetition rate of the Kerr comb. A 630-fold phase-noise reduction is observed when the Kerr comb is synchronized to the OPO, which represents the lowest noise generated on the silicon-nitride platform. Our work demonstrates a simple, effective approach for performing OFD and provides a pathway toward chip-scale devices that can generate microwave frequencies comparable to the purest tones produced in metrological laboratories. This technology can significantly boost the further development of data communications and microwave sensing.

physics.optics↗

arXiv2023

Large regenerative parametric amplification on chip at ultra-low pump powers

Chip-based optical amplifiers can significantly expand the functionalities of photonic devices. In particular, optical-parametric amplifiers (OPAs), with engineerable gain-spectra, are well-suited for nonlinear-photonic applications. Chip-based OPAs typically require long waveguides that occupy a large footprint, and high pump powers that cannot be easily produced with chip-scale lasers. We theoretically and experimentally demonstrate a microresonator-assisted regenerative OPA that benefits from the large nonlinearity enhancement of microresonators and yields a high gain in a small footprint. We achieve 30-dB parametric gain with only 9 mW of cw-pump power and show that the gain spectrum can be engineered to cover telecom channels inaccessible with Er-based amplifiers. We further demonstrate the amplification of Kerr-soliton comb lines and the preservation of their phase properties. Additionally, we demonstrate amplification by injection locking of optical-parametric oscillators, which corresponds to a regenerative amplifier pumped above the oscillation threshold. Novel dispersion engineering techniques such as coupled cavities and higher-order-dispersion phase matching can further extend the tunability and spectral coverage of our amplification schemes. The combination of high gain, small footprint, low pump power, and flexible gain-spectra engineering of our regenerative OPA is ideal for amplifying signals from the nanowatt to microwatt regimes for portable or space-based devices where ultralow electrical power levels are required and can lead to important applications in on-chip optical- and microwave-frequency synthesis and precise timekeeping.

physics.optics↗

arXiv2023

Ultra-Low-Loss Silicon Nitride Photonics Based on Deposited Films Compatible with Foundries

The fabrication processes of silicon nitride photonic devices used in foundries require low temperature deposition, which typically leads to high propagation losses. Here, we show that propagation loss as low as 0.42 dB/cm can be achieved using foundry compatible processes by solely reducing waveguide surface roughness. By post-processing the fabricated devices using rapid thermal anneal (RTA) and furnace anneal, we achieve propagation losses down to 0.28 dB/cm and 0.06 dB/cm, respectively. These low losses are comparable to the conventional devices using high temperature, high-stress low-pressure chemical vapor deposition (LPCVD) films. We also tune the dispersion of the devices, and proved that these devices can be used for linear and nonlinear applications. Low threshold parametric oscillation, broadband frequency combs and narrow-linewidth laser are demonstrated. Our work demonstrates the feasibility of scalable photonic systems based on foundries.

physics.optics↗

arXiv2021

Femtosecond Pulse Generation via an Integrated Electro-Optic Time Lens

Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-picosecond pulses can be synthesized without mode-locking, by modulating a continuous-wave (CW) single-frequency laser using a cascade of electro-optic (EO) modulators. This method is particularly attractive due to its simplicity, robustness, and frequency-agility but has been realized only on a tabletop using multiple discrete EO modulators and requiring optical amplifiers (to overcome large insertion losses), microwave amplifiers, and phase shifters. Here we demonstrate a chip-scale femtosecond pulse source implemented on an integrated lithium niobate (LN) photonic platform18, using cascaded low-loss electro-optic amplitude and phase modulators and chirped Bragg grating, forming a time-lens system. The device is driven by a CW distributed feedback (DFB) chip laser and controlled by a single CW microwave source without the need for any stabilization or locking. We measure femtosecond pulse trains (520 fs duration) with a 30-GHz repetition rate, flat-top optical spectra with a 10-dB optical bandwidth of 12.6 nm, individual comb-line powers above 0.1 milliwatt, and pulse energies of 0.54 picojoule. Our results represent a tunable, robust and low-cost integrated pulsed light source with CW-to-pulse conversion efficiencies an order of magnitude higher than achieved with previous integrated sources. Our pulse generator can find applications from ultrafast optical measurement to networks of distributed quantum computers.

physics.optics↗

arXiv2021

Theory of $χ^{(2)}$-microresonator-based frequency conversion

Microresonator-based platforms with $χ^{(2)}$ nonlinearities have the potential to perform frequency conversion at high efficiencies and ultralow powers with small footprints. The standard doctrine for achieving high conversion efficiency in cavity-based devices requires "perfect matching", that is, zero phase mismatch while all relevant frequencies are precisely at a cavity resonance, which is difficult to achieve in integrated platforms due to fabrication errors and limited tunabilities. In this Letter, we show that the violation of perfect matching does not necessitate a reduction in conversion efficiency. On the contrary, in many cases, mismatches should be intentionally introduced to improve the efficiency or tunability of conversion. We identify the universal conditions for maximizing the efficiency of cavity-based frequency conversion and show a straightforward approach to fully compensate for parasitic processes such as thermorefractive and photorefractive effects that, typically, can limit the conversion efficiency. We also show rigorously that these high-efficiency states are stable.

physics.optics↗

arXiv2021

Integrated Kerr frequency comb-driven silicon photonic transmitter

The exponential growth of computing needs for artificial intelligence and machine learning has had a dramatic impact on data centre energy consumption, which has risen to environmentally significant levels. Using light to send information between compute nodes can dramatically decrease this energy consumption while simultaneously increasing bandwidth. Through wavelength-division multiplexing with chip-based microresonator Kerr frequency combs, independent information channels can be encoded onto many distinct colours of light in the same optical fibre for massively parallel data transmission with low energy. While previous demonstrations have relied on benchtop equipment for filtering and modulating Kerr comb wavelength channels, data centre interconnects require a compact on-chip form factor for these operations. Here, we demonstrate the first integrated silicon photonic transmitter using a Kerr comb source. The demonstrated architecture is scalable to hundreds of wavelength channels, enabling a fundamentally new class of massively parallel terabit-scale optical interconnects for future green hyperscale data centres.

physics.app-ph↗

arXiv2021

Synchronization of non-solitonic Kerr combs

Synchronization is a ubiquitous phenomenon in nature that manifests as the spectral or temporal locking of coupled nonlinear oscillators. In the field of photonics, synchronization has been implemented in various laser and oscillator systems, enabling applications including coherent beam combining and high precision pump-probe measurements. Recent experiments have also shown time-domain synchronization of Kerr frequency combs via coupling of two separate oscillators operating in the dissipative soliton [i.e., anomalous group-velocity dispersion (GVD)] regime. Here, we demonstrate all-optical synchronization of Kerr combs in the non-solitonic, normal-GVD regime in which phase-locked combs with high pump-to-comb conversion efficiencies and relatively flat spectral profiles are generated. Our results reveal the universality of Kerr comb synchronization and extend its scope beyond the soliton regime, opening a promising path towards coherently combined normal-GVD Kerr combs with spectrally flat profiles and high comb-line powers in an efficient microresonator platform.

physics.optics↗

arXiv2020

Near-degenerate quadrature-squeezed vacuum generation on a silicon-nitride chip

Squeezed states are a primary resource for continuous-variable (CV) quantum information processing. To implement CV protocols in a scalable and robust way, it is desirable to generate and manipulate squeezed states using an integrated photonics platform. In this Letter, we demonstrate the generation of quadrature-phase squeezed states in the radio-frequency carrier sideband using a small-footprint silicon-nitride microresonator with a dual-pumped four-wave-mixing process. We record a squeezed noise level of 1.34 dB ($\pm$0.16 dB) below the photocurrent shot noise, which corresponds to 3.09 dB ($\pm$0.49 dB) of quadrature squeezing on chip. We also show that it is critical to account for the nonlinear behavior of the pump fields to properly predict the squeezing that can be generated in this system. This technology represents a significant step toward creating and manipulating large-scale CV cluster states that can be used for quantum information applications including universal quantum computing.

physics.optics↗

arXiv2020

On-chip self-referencing using integrated lithium niobate waveguides

The measurement and stabilization of the carrier-envelope offset frequency $f_{\textrm{CEO}}$ via self-referencing is paramount for optical frequency comb generation which has revolutionized precision frequency metrology, spectroscopy, and optical clocks. Over the past decade, the development of chip-scale platforms has enabled compact integrated waveguides for supercontinuum generation. However, there is a critical need for an on-chip self-referencing system that is adaptive to different pump wavelengths, requires low pulse energy, and does not require complicated processing. Here, we demonstrate efficient carrier-envelope offset frequency $f_{\textrm{CEO}}$ stabilization of a modelocked laser with only 107 pJ of pulse energy via self-referencing in an integrated lithium niobate waveguide. We realize an $f$-$2f$ interferometer through second-harmonic generation and subsequent supercontinuum generation in a single dispersion-engineered waveguide with a stabilization performance equivalent to a conventional off-chip module. The $f_{\textrm{CEO}}$ beatnote is measured over a pump wavelength range of 70 nm. We theoretically investigate our system using a single nonlinear envelope equation with contributions from both second- and third-order nonlinearities. Our modeling reveals rich ultrabroadband nonlinear dynamics and confirms that the initial second harmonic generation followed by supercontinuum generation with the remaining pump is responsible for the generation of a strong $f_{\textrm{CEO}}$ signal as compared to a traditional $f$-$2f$ interferometer. Our technology provides a highly-simplified system that is robust, low cost, and adaptable for precision metrology for use outside a research laboratory.

physics.optics↗

arXiv2020

Nanophotonic spin-glass for realization of a coherent Ising machine

The need for solving optimization problems is prevalent in a wide range of physical applications, including neuroscience, network design, biological systems, socio-economics, and chemical reactions. Many of these are classified as non-deterministic polynomial-time (NP) hard and thus become intractable to solve as the system scales to a large number of elements. Recent research advances in photonics have sparked interest in using a network of coupled degenerate optical parametric oscillators (DOPO's) to effectively find the ground state of the Ising Hamiltonian, which can be used to solve other combinatorial optimization problems through polynomial-time mapping. Here, using the nanophotonic silicon-nitride platform, we propose a network of on-chip spatial-multiplexed DOPO's for the realization of a photonic coherent Ising machine. We demonstrate the generation and coupling of two microresonator-based DOPO's on a single chip. Through a reconfigurable phase link, we achieve both in-phase and out-of-phase operation, which can be deterministically achieved at a fast regeneration speed of 400 kHz with a large phase tolerance. Our work provides the critical building blocks towards the realization of a chip-scale photonic Ising machine.

physics.optics↗

arXiv2020

Visible nonlinear photonics via high-order-mode dispersion engineering

Over the past decade, remarkable advances have been realized in chip-based nonlinear photonic devices for classical and quantum applications in the near- and mid-infrared regimes. However, few demonstrations have been realized in the visible and near-visible regimes, primarily due to the large normal material group-velocity dispersion (GVD) that makes it challenging to phase match third-order parametric processes. In this paper, we show that exploiting dispersion engineering of higher-order waveguide modes provides waveguide dispersion that allows for small or anomalous GVD in the visible and near-visible regimes and phase matching of four-wave mixing processes. We illustrate the power of this concept by demonstrating in silicon nitride microresonators a near-visible modelocked Kerr frequency comb and a narrow-band photon-pair source compatible with Rb transitions. These realizations extend applications of nonlinear photonics towards the visible and near-visible regimes for applications in time and frequency metrology, spectral calibration, quantum information, and biomedical applications.

physics.optics↗

arXiv2020

Broadband Ultrahigh-Resolution chip-scale Scanning Soliton Dual-Comb Spectroscopy

We present a chip-scale scanning dual-comb spectroscopy (SDCS) approach for broadband ultrahigh-resolution spectral acquisition. SDCS uses Si3N4 microring resonators that generate two single soliton micro-combs spanning 37 THz (300 nm) on the same chip from a single 1550-nm laser, forming a high-mutual-coherence dual-comb. We realize continuous tuning of the dual-comb system over the entire optical span of 37.5 THz with high precision using integrated microheater-based wavelength trackers. This continuous wavelength tuning is enabled by simultaneous tuning of the laser frequency and the two single soliton micro-combs over a full free spectral range of the microrings. We measure the SDCS resolution to be 319+-4.6 kHz. Using this SDCS system, we perform the molecular absorption spectroscopy of H13C14N over its 2.3 THz (18 nm)-wide overtone band, and show that the massively parallel heterodyning offered by the dual-comb expands the effective spectroscopic tuning speed of the laser by one order of magnitude. Our chip-scale SDCS opens the door to broadband spectrometry and massively parallel sensing with ultrahigh spectral resolution.

physics.app-ph↗

arXiv2019

Observation of Arnold Tongues in Coupled Soliton Kerr Frequency Combs

We demonstrate various regimes of synchronization in systems of two coupled cavity soliton-based Kerr frequency combs. We show sub-harmonic, harmonic and harmonic-ratio synchronization of coupled microresonators, and reveal their dynamics in the form of Arnold tongues, structures that are ubiquitous in nonlinear dynamical systems. Our experimental results are well corroborated by numerical simulations based on coupled Lugiato-Lefever equations. This study illustrates the newfound degree of flexibility in synchronizing Kerr combs across a wide range of comb spacings and could find applications in time and frequency metrology, spectroscopy, microwave photonics, optical communications, and astronomy.

physics.optics↗

arXiv2019

Raman lasing and soliton modelocking in lithium-niobate microresonators

The recent advancement in lithium niobate on insulator (LNOI) technology is revolutionizing the optoelectronic industry as devices of higher performance, lower power consumption, and smaller footprint can be realized due to the high optical confinement in the structures. The LNOI platform offers both large \c{hi}(2) and \c{hi}(3) nonlinearities along with the power of dispersion engineering, enabling brand new nonlinear photonic devices and applications towards the next generation of integrated photonic circuits. However, the Raman scattering, one of the most important nonlinear phenomena, have not been extensively studied, neither was its influences in dispersion-engineered LNOI nano-devices. In this work, we characterize the Raman radiation spectra in a monolithic lithium niobate (LN) microresonator via selective excitation of Raman-active phonon modes. Remarkably, the dominant mode for Raman oscillation is observed in the backward direction for a continuous-wave pump threshold power of 20 mW with a reportedly highest differential quantum efficiency of 46 %. In addition, we explore the effects of Raman scattering on Kerr optical frequency combs generation. We achieve, for the first time, soliton modelocking on a X-cut LNOI chip through sufficient suppression of the Raman effect via cavity geometry control. Our analysis of the Raman effect provides guidance for the development of future chip-based photonic devices on the LNOI platform.

physics.optics↗

arXiv2019

Turn-key, high-efficiency Kerr comb source

We demonstrate an approach for automated Kerr comb generation in the normal group-velocity dispersion (GVD) regime. Using a coupled-ring geometry in silicon nitride, we precisely control the wavelength location and splitting strength of avoided mode crossings to generate low-noise frequency combs with pump-to-comb conversion efficiencies of up to 41%, which is the highest reported to date for normal-GVD Kerr combs. Our technique enables on-demand generation of a high-power comb source for applications such as wavelength-division multiplexing in optical communications.

physics.optics↗

arXiv2019

Supercontinuum generation in angle-etched diamond waveguides

We experimentally demonstrate on-chip supercontinuum generation in the visible region in angle etched diamond waveguides. We measure an output spectrum spanning 670 nm to 920 nm in a 5mm long waveguide using 100 fs pulses with 187 pJ of incident pulse energy. Our fabrication technique, combined with diamonds broad transparency window, offers a potential route toward broadband supercontinuum generation in the UV domain.

physics.optics↗