arXiv subjects
Publications and source records attributed to Yoshitomo Okawachi.
We describe a novel technique for performing a single-shot optical cross-correlation in nanowaveguides. Our scheme is based on four-wave mixing between two orthogonally polarized input signals propagating with different velocities due to polarization mode dispersion. The cross-correlation is determined by measuring the spectrum of the idler wave generated by the four-wave mixing process.
Optical frequency combs represent a revolutionary technology for high precision spectroscopy due to their narrow linewidths and precise frequency spacing. Generation of such combs in the mid-infrared (IR) spectral region (2-20 um) is of great interest due to the presence of a large number of gas absorption lines in this wavelength regime. Recently, frequency combs have been demonstrated in the MIR in several platforms, including fiber combs, mode-locked lasers, optical parametric oscillators, and quantum cascade lasers. However, these platforms are either relatively bulky or challenging to integrate on-chip. An alternative approach using parametric mixing in microresonators is highly promising since the platform is extremely compact and can operate with relatively low powers. However, material and dispersion engineering limitations have prevented the realization of a microresonator comb source past 2.55 um. Although silicon could in principle provide a CMOS compatible platform for on-chip comb generation deep into the mid-IR, to date, silicon's linear and nonlinear losses have prevented the realization of a microresonator-based comb source. Here we overcome these limitations and realize a broadband frequency comb spanning from 2.1 um to 3.5 um and demonstrate its viability as a spectroscopic sensing platform. Such a platform is compact and robust and offers the potential to be versatile and durable for use outside the laboratory environment for applications such as real-time monitoring of atmospheric gas conditions.
We observe strong modal coupling between the TE00 and TM00 modes in Si3N4 ring resonators revealed by avoided crossings of the corresponding resonances. Such couplings result in significant shifts of the resonance frequencies over a wide range around the crossing points. This leads to an effective dispersion that is one order of magnitude larger than the intrinsic dispersion and creates broad windows of anomalous dispersion. We also observe the changes to frequency comb spectra generated in Si3N4 microresonators due polarization mode and higher-order mode crossings and suggest approaches to avoid these effects. Alternatively, such polarization mode-crossings can be used as a novel tool for dispersion engineering in microresonators.
Recent developments demonstrate that parametric four-wave mixing (FWM) in high-Q microresonators is a highly promising and effective approach for optical frequency comb generation, with applications including spectroscopy, optical clocks, arbitrary waveform generation, frequency metrology, and astronomical spectrograph calibration. Each of these microresonator platforms utilizes a scheme in which the system is pumped by a single-frequency laser at a cavity resonance. This scheme requires tuning of the pump wavelength into resonance and the generated comb is susceptible to fluctuations in pump power or frequency which can disrupt the soft thermal lock and comb generation. We demonstrate a novel fiber-microresonator dual-cavity architecture that preferentially oscillates at modes of the microresonator due to its high density of states and generates robust and broadband combs (> 900 nm) without an external pump laser. Such a scheme could greatly simplify the comb generation process and allow for a fully-integrated chip-scale source with an on-chip amplifier.
We perform the first theoretical modeling of the spectral-temporal dynamics of parametric microresonator comb generation with octave-spanning bandwidths through use of the Lugiato-Lefever model extended to include higher-order dispersion and self-steepening. We show that three distinct stages are necessary to achieve single-pulse modelocking and ultrabroadband, stabilized combs. Our simulations agree well with previous experimental demonstrations and predict many of the observed features, including multi-pulse generation, dispersive wave generation, modelocking and comb stabilization.
Development of ultrashort pulse sources has had an immense impact on condensed-matter physics, biomedical imaging, high-field physics, frequency metrology, telecommunications, nonlinear optics, and molecular spectroscopy. Although numerous advancements of such sources have been made, it remains a challenge to create a highly compact, robust platform capable of producing femtosecond pulses over a wide range of wavelengths, durations, and repetition rates. Recent observations of frequency comb generation via cascaded parametric oscillation in microresonators11 suggest a path for achieving this goal. Here we investigate the temporal and spectral properties of parametric combs generated in silicon-nitride microresonators and observe a transition to passive modelocking of the comb consistent with soliton-pulse formation, resulting in the generation of 160-fs pulses at a 99-GHz repetition rate. This platform offers the prospect of producing pulses from 10 fs to a few ps at repetition rates from 10 GHz to > 1 THz and over a wavelength range of 0.8 - 6 μm.
We demonstrate a frequency comb spanning an octave via the parametric process of cascaded four-wave mixing in a monolithic, high-Q silicon nitride microring resonator. The comb is generated from a single-frequency pump laser at 1562 nm and spans 128 THz with a spacing of 226 GHz, which can be tuned slightly with the pump power. In addition, we investigate the RF-noise characteristics of the parametric comb and find that the comb can operate in a low-noise state with a 30-dB reduction in noise as the pump frequency is tuned into the cavity resonance.
Recent research has uncovered a remarkable ability to manipulate and control electromagnetic fields to produce effects such as perfect imaging and spatial cloaking. To achieve spatial cloaking, the index of refraction is manipulated to flow light from a probe around an object in such a way that a "hole" in space is created, and it remains hidden. Alternatively, it may be desirable to cloak the occurrence of an event over a finite time period, and the idea of temporal cloaking was proposed in which the dispersion of the material is manipulated in time to produce a "time hole" in the probe beam to hide the occurrence of the event from the observer. This approach is based on accelerating and slowing down the front and rear parts, respectively, of the probe beam to create a well controlled temporal gap in which the event occurs so the probe beam is not modified in any way by the event. The probe beam is then restored to its original form by the reverse manipulation of the dispersion. Here we present an experimental demonstration of temporal cloaking by applying concepts from the time-space duality between diffraction and dispersive broadening. We characterize the performance of our temporal cloak by detecting the spectral modification of a probe beam due to an optical interaction while the cloak is turned off and on and show that the event is observed when the cloak is turned off but becomes undetectable when the cloak is turned on. These results are a significant step toward the development of full spatio-temporal cloaking.
We demonstrate a stable CMOS-compatible on-chip multiple-wavelength source by filtering and modulating individual lines from a frequency comb generated by a microring resonator optical parametric oscillator.. We show comb operation in a low-noise state that is stable and usable for many hours. Bit-error rate measurements demonstrate negligible power penalty from six independent frequencies when compared to a tunable diode laser baseline. Open eye diagrams confirm the fidelity of the 10 Gb/s data transmitted at the comb frequencies and the suitability of this device for use as a fully integrated silicon-based WDM source.
We observe competition between the modulation instability (MI) and stimulated Brillouin scattering (SBS) in a 9.2-GHz broadband SBS slow light device, in which a standard 20-km-long single-mode LEAF fibre is used as the SBS medium. We find that MI is dominant and depletes most of the pump power when we use an intense pump beam at ~1.55 μm, where the LEAF fibre is anomalously dispersive. The dominance of the MI in the LEAF-fibre-based system suppresses the SBS gain, degrading the SBS slow light delay and limiting the SBS gain-bandwidth to 126 dB \cdot GHz. In a dispersion-shifted highly nonlinear fibre, the SBS slow light delay is improved due to the suppression of the MI, resulting in a gain-bandwidth product of 344 dB \cdot GHz, limited by our available pump power of 0.82 W.