arXiv subjects

Youness Hadouch

Publications and source records attributed to Youness Hadouch.

9 recordsLinked to original sources

arXiv2026

Multiferroic Properties of Electrospun CFO-BCTSn Nanocomposites for Magnetoelectric and Magnetic Field Sensing Applications

Multiferroic CFO-BCTSn composite nanofibers were synthesized using a sol-gel electrospinning method. Electron microscopy revealed well-defined fibers with diameters of 120-150 nm. Structural analyses using X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy confirmed the coexistence of the spinel CFO phase and the perovskite BCTSn phase without detectable secondary phases. Magnetic hysteresis measurements demonstrated the magnetic behavior of the nanofibers, while piezoresponse force microscopy confirmed their piezoelectric properties. Magnetoelectric coupling was evidenced by differences between the magnetic hysteresis loops of electrically poled and unpoled samples. These lead-free composite nanofibers show potential for nanoscale magnetoelectric devices and magnetic field sensing applications.

cond-mat.mtrl-sci↗

arXiv2026

Ferroelectric KNbO3 nanoplatelets for thermally driven pyrocatalytic hydrogen evolution and dye degradation

Day- and night-induced thermal cycling offers a promising route for harvesting ambient thermal energy to drive sustainable hydrogen production and pollutant degradation. Pyroelectric materials enable this process by converting temperature fluctuations into surface charges capable of promoting catalytic water splitting and advanced oxidation reactions. In this work, we demonstrate efficient pyrocatalytic hydrogen evolution and Rhodamine B (RhB) degradation using orthorhombic ferroelectric Potassium niobate (KNbO$_3$) nanoplatelets (KN-np). Under thermal cycling between 20 and 50 $^\circ$C, KN-np achieved a hydrogen yield of 680 $\mu$mol g$^{-1}$ after 30 thermal cycles, corresponding to an average hydrogen production rate of 22.67 $\mu$mol g$^{-1}$ per cycle. In addition, KN-np exhibited excellent pyrocatalytic activity toward RhB degradation, reaching 84% removal after only 16 thermal cycles with an apparent kinetic rate constant of 0.11 cycle$^{-1}$. The remarkable catalytic performance is attributed to the strong spontaneous polarization and excellent pyroelectric properties of the KNbO$_3$ nanoplatelets, which promote efficient charge generation and interfacial redox reactions. These findings highlight the potential of KNbO$_3$ nanostructures as efficient pyrocatalysts for clean hydrogen production and environmental remediation.

cond-mat.mtrl-sci↗

arXiv2026

Enhancement in Magnetic and Magnetocaloric Properties of CoFe2O4 Nanofibers at Lower Temperatures

This research paper investigates new and first insights into the magnetic and magnetocaloric properties of one-dimensional (1D) cobalt ferrite CoFe2O4 (CFO) nanofibers elaborated by sol gel based electrospinning technique, particularly focusing on their behavior at low temperatures for specific applications. The calcined CFO nanofibers microstructural, structural, magnetic, and magnetocaloric properties were explored. The nanofibers (NFs) microstructure, with an average diameter of 210 nm, was examined by scanning and transmission electron microscopies (SEM, TEM). The X-ray diffraction (XRD) of the CFO nanofibers showed a pure cubic close-packed (c.c.p) spinel crystalline structure with the F d 3 -m space group. The Raman spectroscopic studies further confirm the cubic inverse spinel phase. The Magnetic properties were explored as a function of temperature, ranging from 10 to 300 K, a ferromagnetic behaviour was observed with the highest saturation magnetization of 75.87 emu g(-1) and a coercivity of 723 Oe at room temperature. The variation of the magnetic entropy was measured indirectly using the Maxwell approach with an increasing magnetic field. A maximum of Delta(S)=1.71 J K-1 was reached around 32 K. At 180 K, the associated adiabatic temperature change, Delta (Tmax), was 0.93 K, with a large RCP value of 7.58 J kg-1 was measured, which is reasonably high for the corresponding nanoparticles (NPs). This work may suggest that 1D CFO nanofibers offer a promising route for the production of nanostructured magnetic materials, potentially impacting various electronic and electromagnetic device applications at low temperatures.

cond-mat.mtrl-sci↗

arXiv2025

Current Advances in Magnetoelectric Composites with Various Interphase Connectivity Types

Magnetoelectric composites integrate the coupling between magnetic and piezoelectric materials to create new functionalities for potential technological applications. This coupling is typically achieved through the exchange of magnetic, electric, or elastic energy across the interfaces between the different constituent materials. Tailoring the strength of the magnetoelectric effect is primarily accomplished by selecting suitable materials for each constituent and by optimizing geometrical and microstructural designs. Various composite architectures, such as (0-3), (2-2), (1-3) and core-shell connectivities, have been studied to enhance magnetoelectric coupling and other required physical properties in composites. This review examines the latest advancements in magnetoelectric materials, focusing on the impact of different interphase connectivity types on their properties and performance. Before exploring magnetic-electric coupling, a brief overview of the historical background of multiferroic magnetoelectric composites is provided. Fundamental concepts underlying the magnetoelectric effect, piezoelectricity, and the magnetostrictive effect are explained, including their origins and examples of these materials' properties. So far, three types of magnetoelectric composite connectivities have been investigated experimentally: particulate composites (0-3), laminated and thin films (2-2), sticks embedded in matrix, core-shell particles, and coaxial fibers. An outlook on the prospects and scientific challenges in the field of multiferroic magnetoelectric composites is given at the end of this review.

cond-mat.mtrl-sci↗

arXiv2024

Impact of Polymeric precursor and Auto-combustion on the Structural, Microstructural, Magnetic, and Magnetocaloric Properties of La0.8Sr0.2MnO3

In this work, La0.8Sr0.2MnO3 (LSMO) nanopowders are synthesized using two different methods: Pechini (LSMO-PC) and auto-combustion (LSMO-AC). Nanoparticle sizes, structural, magnetic, and magnetocaloric properties were determined and compared. The X-ray diffraction confirms the coexistence of two phases; rhombohedral symmetry with space group R-3c and orthorhombic symmetry with space group Pbnm, with the rhombohedral phase dominating. The scanning electron microscope images show that LSMO-PC has larger nanoparticle sizes (~495 nm) than LSMO-AC (~195 nm). The samples exhibit ferromagnetic properties with distinct hysteresis loops and Curie temperatures 340 K and 290 K for LSMO-PC and LSMO-AC respectively. The variation of the magnetic entropy was measured indirectly using the Maxwell approach with increasing magnetic field. For LSMO-PC it reaches a maximum -dSM=1.69 J/kg.K at 340 K and dH= 5 T. The associated adiabatic temperature change dTM is 1.04 K. While LSMO-PC demonstrates superior magnetic and magnetocaloric properties, LSMO-AC displays significant magnetocaloric thermal stability. The obtained values make LSMO-PC and LSMO-AC promising candidates for eco-friendly room-temperature magnetocaloric applications.

cond-mat.mtrl-sci↗

arXiv2023

Enhanced RCP and large inverse magnetocaloric effect of CoFe$_2$O$_4$ nanoparticles synthesized by auto-combustion method

This work focuses on the microstructure, magnetic properties and magnetocaloric effect of CoFe$_2$O$_4$ (CFO) nanoparticles elaborated by sol-gel auto combustion method. The XRD investigation indicates that CFO is crystallized in a cubic spinel structure and the SEM micrograph shows a fine quasi-spherical with an average grain sizes of 160 nm. The temperature dependence of the Raman spectra reveals the ferromagnetic to paramagnetic (FM-PM) transition started from 723 K and the magnetization versus temperature measurements shows the Curie temperature located at T$_{\rm C}$ = 785 K. Large value of magnetocaloric temperature change of $Δ$T =11.2 K with a high RCP of 687.56 J Kg$^{-1}$ are achieved indirectly via the Maxwell approach making our CFO nanopowder suitable candidate for both environmentally friendly magnetic refrigeration and medical applications at ambient temperature.

cond-mat.mtrl-sci↗

arXiv2023

Magnetoelectric coupling in multiferroic CFO/BCTSn core shell nanofibers elaborated by co-axial electrospinning method

Multiferroic CoFe2O4-Ba0.95Ca0.05Ti0.89Sn0.11O3 core-shell nanofibers (CFO@BCTSn NFs) were synthesized by a sol-gel co-axial electrospinning technique. The scanning electron microscope and transmission electron microscope were used to check nanofibers' core-shell structure/configuration. X-ray diffraction and a high-resolution transmission electron microscope were used to confirm the spinel structure of CFO and the perovskite structure of BCTSn. The magnetic character of the resultant CFO@BCTSn NFs was determined by SQUID magnetometry. The piezoelectricity was verified using piezo-response force microscopy, which revealed an entirely covered ferroelectric shell outline, in accordance with SEM and TEM observations. The magnetoelectric (ME) coefficient was measured as a function of the applied external DC magnetic field. The maximum ME coefficient obtained for the CFO@BCTSn NFs was 346 mV cm-1 Oe-1. The high magnetoelectric coupling suggests that CFO@BCTSn NFs could be a promising candidate for magnetic field sensor and magnetoelectric device applications.

cond-mat.mtrl-sci↗

arXiv2023

Room-temperature magnetoelectric effect in lead-free multiferroic $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ particulate composites

Multiferroic particulate composites $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ with ($x$ = 0.1, 0.2, 0.3, 0.4 and 0.5) have been prepared by mechanical mixing of the calcined and milled individual ferroic phases. X-ray diffraction and Raman spectroscopy analysis confirmed the formation of both perovskite Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) and spinel CoFe$_2$O$_4$ (CFO) phases without the presence of additional phases. The morphological properties of the composites were provided by using Field Emission Scanning Electron Microscopy. The BCTSn-CFO composites exhibit multiferroic behavior at room temperature, as evidenced by ferroelectric and ferromagnetic hysteresis loops. The magnetoelectric (ME) coupling was measured under a magnetic field up to 10 kOe and the maximum ME response found to be 0.1 mV /cm/ Oe for the composition 0.7 BCTSn-0.3 CFO exhibiting a high degree of pseudo-cubicity and large density.

cond-mat.mtrl-sci↗

arXiv2022

Electrocaloric effect and high energy storage efficiency in lead-free Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ ceramic elaborated by sol-gel method

Structural, dielectric, ferroelectric, energy storage properties, and electrocaloric effect were studied in lead-free ceramic Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) elaborated by sol-gel method. Phase purity structure was confirmed from X-ray data using Rietveld refinement analysis which revealed the coexistence of tetragonal (P4mm) and orthorhombic (Amm2) symmetries at room temperature. Phase transitions were detected by dielectric and differential scanning calorimetry results. Energy storage properties were determined from P-E hysteresis, and the electrocaloric properties were calculated indirectly via the Maxwell approach. The large value of electrocaloric temperature change of $Δ$T=0.807 K obtained at a relatively small field of 30 kV cm$^{-1}$ and high energy storage efficiency can make BCTSn ceramic a promising candidate for environmentally friendly refrigeration and energy storage applications.

cond-mat.mtrl-sci↗