arXiv subjects

Young-ho Cho

Publications and source records attributed to Young-ho Cho.

9 recordsLinked to original sources

arXiv2026

LACE-S: Toward Sensitivity-consistent Locational Average Carbon Emissions via Neural Representation

Carbon-aware grid optimization relies on accurate locational emission metrics to effectively guide demand-side decarbonization tasks such as spatial load shifting. However, existing metrics are only valid around limited operating regions and unfortunately cannot generalize the emission patterns beyond these regions. When these metrics are used to signal carbon-sensitive resources, they could paradoxically increase system-wide emissions. This work seeks to develop a sensitivity-consistent metric for locational average carbon emissions (LACE-S) using a neural representation approach. To ensure physical validity, the neural model enforces total emission balance through an explicit projection layer while matching marginal emission sensitivities across the entire loading region. Jacobian-based regularization is further introduced to capture the underlying partition of load buses with closely aligned generator responses. Moreover, we present a scalable zonal aggregation strategy, ZACE-S, to reduce the model complexity by mapping nodal inputs to predefined market zones. Numerical tests on the IEEE 30-bus system have verified the performance improvements of LACE-S in matching total emissions and their sensitivities over the non-regularized design. Crucially, while spatial load shifting driven by existing metrics often increases the post-shift emissions, the proposed LACE-S metric has led to a reliable reduction of system-wide emissions, demonstrating its excellent consistency with the global emission patterns.

eess.SY↗

arXiv2026

PGLib-CO2: A Power Grid Library for Real-Time Computation and Optimization of Carbon Emissions

Achieving a sustainable electricity infrastructure requires the explicit integration of carbon emissions into power system modeling and optimization. However, existing open-source test cases for power system research lack generator-level carbon profiling, preventing the benchmark of carbon-aware operational strategies. To address this gap, this work introduces PGLib-CO2, an open-source extension to the PGLib-OPF test case library. The proposed PGLib-CO2 enriches standard grid test cases with CO2 and CO2-equivalent emission intensity factors to achieve realistic, generator-level carbon profiling with an expanded list of fuel types. Using the standardized data, PGLib-CO2 allows us to enhance the algorithms for computing key carbon emission metrics. We first utilize the differentiable programming paradigm for computing LMCE by treating the OPF-based grid dispatch as a differentiable layer. This method provides a rigorous marginal sensitivity for general convex cost functions, eliminating the need of using a small incremental change in numerical perturbation. Moreover, to accelerate the real-time LMCE computation, we develop an MPP-based approach that shifts the optimization burden to offline phase of identifying the OPF critical regions. Since each critical region is characterized by a pre-computed affine dispatch function, the online phase reduces to identifying the region followed by efficiently evaluating the region-specific LMCE values. Numerical evaluations on IEEE test systems demonstrate that the differentiable LMCE computation attains the precise sensitivity information, and the MPP-based approach retrieves the LMCE signals faster than the direct optimization approach. By bridging high-fidelity data with advanced parametric computation, PGLib-CO2 provides a reproducible and computationally efficient foundation for future research in sustainable power system operations.

eess.SY↗

arXiv2026

Carbon-aware Market Participation for Building Energy Management Systems

Tackling climate change requires the rapid and deep decarbonization of electric power systems. While energy management systems (EMSs) play a central role in this transition, conventional EMSs focus mainly on economic efficiency and often overlook the environmental impact of operational decisions. To address this gap, this paper proposes a unified, real-time building-level carbon-aware EMS (CAEMS) capable of simultaneously co-optimizing grid imports, energy storage, and flexible demand within a single integrated framework. We formulate a mixed-integer linear program (MILP) model that directly integrates time-varying marginal carbon intensity signals into the EMS objective for coordinated participation in both day-ahead (DA) and real-time (RT) markets. To relax the unrealistic assumption of perfect foresight, we incorporate a model predictive control (MPC) extension driven by a Transformer-based forecaster that jointly predicts electricity prices and carbon intensity. The proposed CAEMS is validated using real-world data from the PJM electricity market. Simulation results demonstrate that modest carbon prices can achieve a significant 22.5% reduction in emissions with only a 1.7% increase in cost.

eess.SY↗

arXiv2025

Sparse Neural Approximations for Bilevel Adversarial Problems in Power Grids

The adversarial worst-case load shedding (AWLS) problem is pivotal for identifying critical contingencies under line outages. It is naturally cast as a bilevel program: the upper level simulates an attacker determining worst-case line failures, and the lower level corresponds to the defender's generator redispatch operations. Conventional techniques using optimality conditions render the bilevel, mixed-integer formulation computationally prohibitive due to the combinatorial number of topologies and the nonconvexity of AC power flow constraints. To address these challenges, we develop a novel single-level optimal value-function (OVF) reformulation and further leverage a data-driven neural network (NN) surrogate of the follower's optimal value. To ensure physical realizability, we embed the trained surrogate in a physics-constrained NN (PCNN) formulation that couples the OVF inequality with (relaxed) AC feasibility, yielding a mixed-integer convex model amenable to off-the-shelf solvers. To achieve scalability, we learn a sparse, area-partitioned NN via spectral clustering; the resulting block-sparse architecture scales essentially linearly with system size while preserving accuracy. Notably, our approach produces near-optimal worst-case failures and generalizes across loading conditions and unseen topologies, enabling rapid online recomputation. Numerical experiments on the IEEE 14- and 118-bus systems demonstrate the method's scalability and solution quality for large-scale contingency analysis, with an average optimality gap of 5.8% compared to conventional methods, while maintaining computation times under one minute.

eess.SY↗

arXiv2025

Wind Power Scenario Generation based on the Generalized Dynamic Factor Model and Generative Adversarial Network

For conducting resource adequacy studies, we synthesize multiple long-term wind power scenarios of distributed wind farms simultaneously by using the spatio-temporal features: spatial and temporal correlation, waveforms, marginal and ramp rates distributions of waveform, power spectral densities, and statistical characteristics. Generating the spatial correlation in scenarios requires the design of common factors for neighboring wind farms and antithetical factors for distant wind farms. The generalized dynamic factor model (GDFM) can extract the common factors through cross spectral density analysis, but it cannot closely imitate waveforms. The GAN can synthesize plausible samples representing the temporal correlation by verifying samples through a fake sample discriminator. To combine the advantages of GDFM and GAN, we use the GAN to provide a filter that extracts dynamic factors with temporal information from the observation data, and we then apply this filter in the GDFM to represent both spatial and frequency correlations of plausible waveforms. Numerical tests on the combination of GDFM and GAN have demonstrated performance improvements over competing alternatives in synthesizing wind power scenarios from Australia, better realizing plausible statistical characteristics of actual wind power compared to alternatives such as the GDFM with a filter synthesized from distributions of actual dynamic filters and the GAN with direct synthesis without dynamic factors.

cs.LG↗

arXiv2025

Data-driven Modeling of Linearizable Power Flow for Large-scale Grid Topology Optimization

Effective power flow (PF) modeling critically affects the solution accuracy and computational complexity of large-scale grid optimization problems. Especially for grid optimization involving flexible topology to enhance resilience, obtaining a tractable yet accurate approximation of nonlinear AC-PF is essential. This work puts forth a data-driven approach to obtain piecewise linear (PWL) PF approximation using an innovative neural network (NN) architecture, effectively aligning with the inherent generative structure of AC-PF equations. Accordingly, our proposed generative NN (GenNN) method directly incorporates binary topology variables, efficiently enabling a mixed-integer linear program (MILP) formulation for grid optimization tasks like optimal transmission switching (OTS) and restoration ordering problems (ROP). To attain model scalability for large-scale applications, we develop an area-partitioning-based sparsification approach by using fixed-size areas to attain a linear growth rate of model parameters, as opposed to the quadratic one of existing work. Numerical tests on the IEEE 118-bus and 6716-bus synthetic Texas grid demonstrate that our sparse GenNN achieves superior accuracy and computational efficiency, substantially outperforming existing approaches in large-scale PF modeling and topology optimization.

eess.SY↗

arXiv2024

Should we use model-free or model-based control? A case study of battery management systems

Reinforcement learning (RL) and model predictive control (MPC) each offer distinct advantages and limitations when applied to control problems in power and energy systems. Despite various studies on these methods, benchmarks remain lacking and the preference for RL over traditional controls is not well understood. In this work, we put forth a comparative analysis using RL- and MPC-based controllers for optimizing a battery management system (BMS). The BMS problem aims to minimize costs while adhering to operational limits. by adjusting the battery (dis)charging in response to fluctuating electricity prices over a time horizon. The MPC controller uses a learningbased forecast of future demand and price changes to formulate a multi-period linear program, that can be solved using off-the-shelf solvers. Meanwhile, the RL controller requires no timeseries modeling but instead is trained from the sample trajectories using the proximal policy optimization (PPO) algorithm. Numerical tests compare these controllers across optimality, training time, testing time, and robustness, providing a comprehensive evaluation of their efficacy. RL not only yields optimal solutions quickly but also ensures robustness to shifts in customer behavior, such as changes in demand distribution. However, as expected, training the RL agent is more time-consuming than MPC.

eess.SY↗

arXiv2023

Topology-aware Piecewise Linearization of the AC Power Flow through Generative Modeling

Effective power flow modeling critically affects the ability to efficiently solve large-scale grid optimization problems, especially those with topology-related decision variables. In this work, we put forth a generative modeling approach to obtain a piecewise linear (PWL) approximation of AC power flow by training a simple neural network model from actual data samples. By using the ReLU activation, the NN models can produce a PWL mapping from the input voltage magnitudes and angles to the output power flow and injection. Our proposed generative PWL model uniquely accounts for the nonlinear and topology-related couplings of power flow models, and thus it can greatly improve the accuracy and consistency of output power variables. Most importantly, it enables to reformulate the nonlinear power flow and line status-related constraints into mixed-integer linear ones, such that one can efficiently solve grid topology optimization tasks like the AC optimal transmission switching (OTS) problem. Numerical tests using the IEEE 14- and 118-bus test systems have demonstrated the modeling accuracy of the proposed PWL approximation using a generative approach, as well as its ability in enabling competitive OTS solutions at very low computation order.

eess.SY↗

arXiv2023

Wind Power Scenario Generation Using Graph Convolutional Generative Adversarial Network

Generating wind power scenarios is very important for studying the impacts of multiple wind farms that are interconnected to the grid. We develop a graph convolutional generative adversarial network (GCGAN) approach by leveraging GAN's capability in generating large number of realistic scenarios without using statistical modeling. Unlike existing GAN-based wind power data generation approaches, we design GAN's hidden layers to match the underlying spatial and temporal characteristics. We advocate the use of graph filters to embed the spatial correlation among multiple wind farms, and a one-dimensional (1D) convolutional layer to represent the temporal feature filters. The proposed graph and feature filter design significantly reduce the GAN model complexity, leading to improvements in training efficiency and computation complexity. Numerical results using real wind power data from Australia demonstrate that the scenarios generated by the proposed GCGAN exhibit more realistic spatial and temporal statistics than other GAN-based outputs.

cs.LG↗