arXiv subjects

Younggun Cho

Publications and source records attributed to Younggun Cho.

At least 19 recordsLinked to original sources

arXiv2026

RadLoc: Radar-based 3-DoF Global Localization via Fast, Robust, and Lightweight Spatial Descriptor Across Diverse Environmental Scenarios

While global localization using spinning radar has gained attention for its robustness to adverse weather and challenging environments, many studies have focused on individual components such as place recognition or pose estimation. In this paper, we take a holistic view of radar sensor-based global localization and present RadLoc, a fast, robust, and lightweight end-to-end pipeline from place recognition to 3-DoF pose estimation. RadLoc accelerates pre-processing using 1D CA-CFAR filtering and leverages the near-range dominance in spinning radar images to design a compact descriptor and an efficient hierarchical coarse-to-fine retrieval strategy. Moreover, coupled with phase correlation-based 3-DoF pose estimation, it forms a versatile global localization module applicable to SLAM and multi-session SLAM systems. Extensive experiments on 15 sequences across 5 datasets demonstrate that RadLoc achieves robust performance while maintaining the smallest descriptor size and fastest retrieval time among state-of-the-art approaches. The supplementary materials are available at https://sparolab.github.io/research/radloc/.

cs.RO↗

arXiv2026

Robust Image Processing Techniques for Construction Environment Monitoring Using Underwater Robots

This paper proposes a robust image processing framework for underwater robot-based construction environment monitoring, targeting complex degradations observed in real marine environments. Unlike conventional approaches that mainly consider absorption and backscattering, real underwater imagery is strongly affected by depth-dependent forward scattering blur and particle-induced degradations such as marine snow. To address this, we introduce a staged processing pipeline that sequentially models background degradation via depth-aware forward scattering and foreground degradation using realistic marine snow patterns extracted from real images. The resulting synthetic data are used to retrain an existing Joint-ID network without modifying its architecture, enabling an isolated evaluation of dataset realism. In addition, a lightweight post-processing scheme is applied to enhance contrast and structural clarity. Experiments on real underwater datasets collected in Korean coastal environments demonstrate consistent improvements in visual quality and UIQM scores. The results indicate that explicitly modeling forward scattering and realistic particle effects effectively reduces the synthetic-to-real gap and improves practical applicability in real-world underwater robotic operations.

cs.CV↗

arXiv2026

Commerge: Communication-Efficient, Robust, and Fast LiDAR Map Merging Framework for Multi-Robot Coordination in Resource-Constrained Scenarios

By maintaining global consistency across robot teams, multi-robot LiDAR map merging enables faster exploration and efficient area coverage. However, map merging requires exchanging massive sensor data between the server and robots, making communication the bottleneck, especially in communication-constrained environments. Therefore, we present Commerge, a communication-efficient map merging framework that achieves bandwidth reduction through graph-theoretic selective data exchange. By doing so, our Commerge reduces inter-robot communication by up to 5,000x while maintaining alignment accuracy. Our key insight is that only a small subset of carefully selected scans is sufficient for robust map merging. We formulate this as a three-stage cascaded optimization problem on an exchange graph, where vertices represent robot keyframes and edges denote candidate inter-robot loops. Through three cascade stages, we select a sequentially overlapped, balanced-transmission-cost, and geometrically-perceptually optimal scan subset that preserves alignment quality while reducing communication. Unlike existing approaches that either transmit whole scans, which require GB-scale data exchange, or employ naive downsampling, our approach exchanges only MB-scale data while achieving comparable alignment accuracy. Extensive evaluation on five public datasets and four in-house datasets covering cave, planetary-analog, indoor, and outdoor campus environments shows up to 99.98% reduction in data exchange (e.g., from 7,000MB to 1.3MB on the HeLiPR dataset), while maintaining alignment performance across embedded to desktop platforms. The supplementary materials are available at https://sparolab.github.io/research/commerge.

cs.RO↗

arXiv2026

GSAT: Geometric Traversability Estimation using Self-supervised Learning with Anomaly Detection for Diverse Terrains

Safe autonomous navigation requires reliable estimation of environmental traversability. Traditional methods have relied on semantic or geometry-based approaches with human-defined thresholds, but these methods often yield unreliable predictions due to the inherent subjectivity of human supervision. While self-supervised approaches enable robots to learn from their own experience, they still face a fundamental challenge: the positive-only learning problem. To address these limitations, recent studies have employed Positive-Unlabeled (PU) learning, where the core challenge is identifying positive samples without explicit negative supervision. In this work, we propose GSAT, which addresses these limitations by constructing a positive hypersphere in latent space to classify traversable regions through anomaly detection without requiring additional prototypes (e.g., unlabeled or negative). Furthermore, our approach employs joint learning of anomaly classification and traversability prediction to more efficiently utilize robot experience. We comprehensively evaluate the proposed framework through ablation studies, validation on heterogeneous real-world robotic platforms, and autonomous navigation demonstrations in simulation environments.

cs.RO↗

arXiv2026

KISS-IMU: Self-supervised Inertial Odometry with Motion-balanced Learning and Uncertainty-aware Inference

Inertial measurement units (IMUs), which provide high-frequency linear acceleration and angular velocity measurements, serve as fundamental sensing modalities in robotic systems. Recent advances in deep neural networks have led to remarkable progress in inertial odometry. However, the heavy reliance on ground truth data during training fundamentally limits scalability and generalization to unseen and diverse environments. We propose KISS-IMU, a novel self-supervised inertial odometry framework that eliminates ground truth dependency by leveraging simple LiDAR-based ICP registration and pose graph optimization as a supervisory signal. Our approach embodies two key principles: keeping the IMU stable through motion-aware balanced training and keeping the IMU strong through uncertainty-driven adaptive weighting during inference. To evaluate performance across diverse motion patterns and scenarios, we conducted comprehensive experiments on various real-world platforms, including quadruped robots. Importantly, we train only the IMU network in a self-supervised manner, with LiDAR serving solely as a lightweight supervisory signal rather than requiring additional learnable processes. This design enables the framework to ensure robustness without relying on joint multi-modal learning or ground truth supervision. The supplementary materials are available at https://sparolab.github.io/research/kiss_imu.

cs.RO↗

arXiv2025

MSG-Loc: Multi-Label Likelihood-based Semantic Graph Matching for Object-Level Global Localization

Robots are often required to localize in environments with unknown object classes and semantic ambiguity. However, when performing global localization using semantic objects, high semantic ambiguity intensifies object misclassification and increases the likelihood of incorrect associations, which in turn can cause significant errors in the estimated pose. Thus, in this letter, we propose a multi-label likelihood-based semantic graph matching framework for object-level global localization. The key idea is to exploit multi-label graph representations, rather than single-label alternatives, to capture and leverage the inherent semantic context of object observations. Based on these representations, our approach enhances semantic correspondence across graphs by combining the likelihood of each node with the maximum likelihood of its neighbors via context-aware likelihood propagation. For rigorous validation, data association and pose estimation performance are evaluated under both closed-set and open-set detection configurations. In addition, we demonstrate the scalability of our approach to large-vocabulary object categories in both real-world indoor scenes and synthetic environments. Project Page: https://sparolab.github.io/research/msg-loc/.

cs.RO↗

arXiv2025

CUTE-Planner: Confidence-aware Uneven Terrain Exploration Planner

Planetary exploration robots must navigate uneven terrain while building reliable maps for space missions. However, most existing methods incorporate traversability constraints but may not handle high uncertainty in elevation estimates near complex features like craters, do not consider exploration strategies for uncertainty reduction, and typically fail to address how elevation uncertainty affects navigation safety and map quality. To address the problems, we propose a framework integrating safe path generation, adaptive confidence updates, and confidence-aware exploration strategies. Using Kalman-based elevation estimation, our approach generates terrain traversability and confidence scores, then incorporates them into Graph-Based exploration Planner (GBP) to prioritize exploration of traversable low-confidence regions. We evaluate our framework through simulated lunar experiments using a novel low-confidence region ratio metric, achieving 69% uncertainty reduction compared to baseline GBP. In terms of mission success rate, our method achieves 100% while baseline GBP achieves 0%, demonstrating improvements in exploration safety and map reliability.

cs.RO↗

arXiv2025

Uni-Mapper: Unified Mapping Framework for Multi-modal LiDARs in Complex and Dynamic Environments

The unification of disparate maps is crucial for enabling scalable robot operation across multiple sessions and collaborative multi-robot scenarios. However, achieving a unified map robust to sensor modalities and dynamic environments remains a challenging problem. Variations in LiDAR types and dynamic elements lead to differences in point cloud distribution and scene consistency, hindering reliable descriptor generation and loop closure detection essential for accurate map alignment. To address these challenges, this paper presents Uni-Mapper, a dynamic-aware 3D point cloud map merging framework for multi-modal LiDAR systems. It comprises dynamic object removal, dynamic-aware loop closure, and multi-modal LiDAR map merging modules. A voxel-wise free space hash map is built in a coarse-to-fine manner to identify and reject dynamic objects via temporal occupancy inconsistencies. The removal module is integrated with a LiDAR global descriptor, which encodes preserved static local features to ensure robust place recognition in dynamic environments. In the final stage, multiple pose graph optimizations are conducted for both intra-session and inter-map loop closures. We adopt a centralized anchor-node strategy to mitigate intra-session drift errors during map merging. In the final stage, centralized anchor-node-based pose graph optimization is performed to address intra- and inter-map loop closures for globally consistent map merging. Our framework is evaluated on diverse real-world datasets with dynamic objects and heterogeneous LiDARs, showing superior performance in loop detection across sensor modalities, robust mapping in dynamic environments, and accurate multi-map alignment over existing methods. Project Page: https://sparolab.github.io/research/uni_mapper.

cs.RO↗

arXiv2025

MARSCalib: Multi-robot, Automatic, Robust, Spherical Target-based Extrinsic Calibration in Field and Extraterrestrial Environments

This paper presents a novel spherical target-based LiDAR-camera extrinsic calibration method designed for outdoor environments with multi-robot systems, considering both target and sensor corruption. The method extracts the 2D ellipse center from the image and the 3D sphere center from the pointcloud, which are then paired to compute the transformation matrix. Specifically, the image is first decomposed using the Segment Anything Model (SAM). Then, a novel algorithm extracts an ellipse from a potentially corrupted sphere, and the extracted center of ellipse is corrected for errors caused by the perspective projection model. For the LiDAR pointcloud, points on the sphere tend to be highly noisy due to the absence of flat regions. To accurately extract the sphere from these noisy measurements, we apply a hierarchical weighted sum to the accumulated pointcloud. Through experiments, we demonstrated that the sphere can be robustly detected even under both types of corruption, outperforming other targets. We evaluated our method using three different types of LiDARs (spinning, solid-state, and non-repetitive) with cameras positioned in three different locations. Furthermore, we validated the robustness of our method to target corruption by experimenting with spheres subjected to various types of degradation. These experiments were conducted in both a planetary test and a field environment. Our code is available at https://github.com/sparolab/MARSCalib.

cs.RO↗

arXiv2025

SKiD-SLAM: Robust, Lightweight, and Distributed Multi-Robot LiDAR SLAM in Resource-Constrained Field Environments

Distributed LiDAR SLAM is crucial for achieving efficient robot autonomy and improving the scalability of mapping. However, two issues need to be considered when applying it in field environments: one is resource limitation, and the other is inter/intra-robot association. The resource limitation issue arises when the data size exceeds the processing capacity of the network or memory, especially when utilizing communication systems or onboard computers in the field. The inter/intra-robot association issue occurs due to the narrow convergence region of ICP under large viewpoint differences, triggering many false positive loops and ultimately resulting in an inconsistent global map for multi-robot systems. To tackle these problems, we propose a distributed LiDAR SLAM framework designed for versatile field applications, called SKiD-SLAM. Extending our previous work that solely focused on lightweight place recognition and fast and robust global registration, we present a multi-robot mapping framework that focuses on robust and lightweight inter-robot loop closure in distributed LiDAR SLAM. Through various environmental experiments, we demonstrate that our method is more robust and lightweight compared to other state-of-the-art distributed SLAM approaches, overcoming resource limitation and inter/intra-robot association issues. Also, we validated the field applicability of our approach through mapping experiments in real-world planetary emulation terrain and cave environments, which are in-house datasets. Our code will be available at https://sparolab.github.io/research/skid_slam/.

cs.RO↗

arXiv2024

PoLaRIS Dataset: A Maritime Object Detection and Tracking Dataset in Pohang Canal

Maritime environments often present hazardous situations due to factors such as moving ships or buoys, which become obstacles under the influence of waves. In such challenging conditions, the ability to detect and track potentially hazardous objects is critical for the safe navigation of marine robots. To address the scarcity of comprehensive datasets capturing these dynamic scenarios, we introduce a new multi-modal dataset that includes image and point-wise annotations of maritime hazards. Our dataset provides detailed ground truth for obstacle detection and tracking, including objects as small as 10$\times$10 pixels, which are crucial for maritime safety. To validate the dataset's effectiveness as a reliable benchmark, we conducted evaluations using various methodologies, including \ac{SOTA} techniques for object detection and tracking. These evaluations are expected to contribute to performance improvements, particularly in the complex maritime environment. To the best of our knowledge, this is the first dataset offering multi-modal annotations specifically tailored to maritime environments. Our dataset is available at https://sites.google.com/view/polaris-dataset.

cs.RO↗

arXiv2024

DiTer++: Diverse Terrain and Multi-modal Dataset for Multi-Robot SLAM in Multi-session Environments

We encounter large-scale environments where both structured and unstructured spaces coexist, such as on campuses. In this environment, lighting conditions and dynamic objects change constantly. To tackle the challenges of large-scale mapping under such conditions, we introduce DiTer++, a diverse terrain and multi-modal dataset designed for multi-robot SLAM in multi-session environments. According to our datasets' scenarios, Agent-A and Agent-B scan the area designated for efficient large-scale mapping day and night, respectively. Also, we utilize legged robots for terrain-agnostic traversing. To generate the ground-truth of each robot, we first build the survey-grade prior map. Then, we remove the dynamic objects and outliers from the prior map and extract the trajectory through scan-to-map matching. Our dataset and supplement materials are available at https://sites.google.com/view/diter-plusplus/.

cs.RO↗

arXiv2024

Thermal Chameleon: Task-Adaptive Tone-mapping for Radiometric Thermal-Infrared images

Thermal Infrared (TIR) imaging provides robust perception for navigating in challenging outdoor environments but faces issues with poor texture and low image contrast due to its 14/16-bit format. Conventional methods utilize various tone-mapping methods to enhance contrast and photometric consistency of TIR images, however, the choice of tone-mapping is largely dependent on knowing the task and temperature dependent priors to work well. In this paper, we present Thermal Chameleon Network (TCNet), a task-adaptive tone-mapping approach for RAW 14-bit TIR images. Given the same image, TCNet tone-maps different representations of TIR images tailored for each specific task, eliminating the heuristic image rescaling preprocessing and reliance on the extensive prior knowledge of the scene temperature or task-specific characteristics. TCNet exhibits improved generalization performance across object detection and monocular depth estimation, with minimal computational overhead and modular integration to existing architectures for various tasks. Project Page: https://github.com/donkeymouse/ThermalChameleon

cs.RO↗

arXiv2024

ReFeree: Radar-Based Lightweight and Robust Localization using Feature and Free space

Place recognition plays an important role in achieving robust long-term autonomy. Real-world robots face a wide range of weather conditions (e.g. overcast, heavy rain, and snowing) and most sensors (i.e. camera, LiDAR) essentially functioning within or near-visible electromagnetic waves are sensitive to adverse weather conditions, making reliable localization difficult. In contrast, radar is gaining traction due to long electromagnetic waves, which are less affected by environmental changes and weather independence. In this work, we propose a radar-based lightweight and robust place recognition. We achieve rotational invariance and lightweight by selecting a one-dimensional ring-shaped description and robustness by mitigating the impact of false detection utilizing opposite noise characteristics between free space and feature. In addition, the initial heading can be estimated, which can assist in building a SLAM pipeline that combines odometry and registration, which takes into account onboard computing. The proposed method was tested for rigorous validation across various scenarios (i.e. single session, multi-session, and different weather conditions). In particular, we validate our descriptor achieving reliable place recognition performance through the results of extreme environments that lacked structural information such as an OORD dataset.

cs.RO↗

arXiv2024

Narrowing your FOV with SOLiD: Spatially Organized and Lightweight Global Descriptor for FOV-constrained LiDAR Place Recognition

We often encounter limited FOV situations due to various factors such as sensor fusion or sensor mount in real-world robot navigation. However, the limited FOV interrupts the generation of descriptions and impacts place recognition adversely. Therefore, we suffer from correcting accumulated drift errors in a consistent map using LiDAR-based place recognition with limited FOV. Thus, in this paper, we propose a robust LiDAR-based place recognition method for handling narrow FOV scenarios. The proposed method establishes spatial organization based on the range-elevation bin and azimuth-elevation bin to represent places. In addition, we achieve a robust place description through reweighting based on vertical direction information. Based on these representations, our method enables addressing rotational changes and determining the initial heading. Additionally, we designed a lightweight and fast approach for the robot's onboard autonomy. For rigorous validation, the proposed method was tested across various LiDAR place recognition scenarios (i.e., single-session, multi-session, and multi-robot scenarios). To the best of our knowledge, we report the first method to cope with the restricted FOV. Our place description and SLAM codes will be released. Also, the supplementary materials of our descriptor are available at \texttt{\url{https://sites.google.com/view/lidar-solid}}.

cs.RO↗

arXiv2024

ReFeree: Radar-based efficient global descriptor using a Feature and Free space for Place Recognition

Radar is highlighted for robust sensing capabilities in adverse weather conditions (e.g. dense fog, heavy rain, or snowfall). In addition, Radar can cover wide areas and penetrate small particles. Despite these advantages, Radar-based place recognition remains in the early stages compared to other sensors due to its unique characteristics such as low resolution, and significant noise. In this paper, we propose a Radarbased place recognition utilizing a descriptor called ReFeree using a feature and free space. Unlike traditional methods, we overwhelmingly summarize the Radar image. Despite being lightweight, it contains semi-metric information and is also outstanding from the perspective of place recognition performance. For concrete validation, we test a single session from the MulRan dataset and a multi-session from the Oxford Offroad Radar, Oxford Radar RobotCar, and the Boreas dataset.

cs.RO↗

arXiv2024

Salience-guided Ground Factor for Robust Localization of Delivery Robots in Complex Urban Environments

In urban environments for delivery robots, particularly in areas such as campuses and towns, many custom features defy standard road semantic categorizations. Addressing this challenge, our paper introduces a method leveraging Salient Object Detection (SOD) to extract these unique features, employing them as pivotal factors for enhanced robot loop closure and localization. Traditional geometric feature-based localization is hampered by fluctuating illumination and appearance changes. Our preference for SOD over semantic segmentation sidesteps the intricacies of classifying a myriad of non-standardized urban features. To achieve consistent ground features, the Motion Compensate IPM (MC-IPM) technique is implemented, capitalizing on motion for distortion compensation and subsequently selecting the most pertinent salient ground features through moment computations. For thorough evaluation, we validated the saliency detection and localization performances to the real urban scenarios. Project page: https://sites.google.com/view/salient-ground-feature/home.

cs.RO↗

arXiv2024

Mesh-based Photorealistic and Real-time 3D Mapping for Robust Visual Perception of Autonomous Underwater Vehicle

This paper proposes a photorealistic real-time dense 3D mapping system that utilizes a learning-based image enhancement method and mesh-based map representation. Due to the characteristics of the underwater environment, where problems such as hazing and low contrast occur, it is hard to apply conventional simultaneous localization and mapping (SLAM) methods. Furthermore, for sensitive tasks like inspecting cracks, photorealistic mapping is very important. However, the behavior of Autonomous Underwater Vehicle (AUV) is computationally constrained. In this paper, we utilize a neural network-based image enhancement method to improve pose estimation and mapping quality and apply a sliding window-based mesh expansion method to enable lightweight, fast, and photorealistic mapping. To validate our results, we utilize real-world and indoor synthetic datasets. We performed qualitative validation with the real-world dataset and quantitative validation by modeling images from the indoor synthetic dataset as underwater scenes.

cs.RO↗