arXiv subjects

Yu Chen

Publications and source records attributed to Yu Chen.

At least 667 records · Page 37Linked to original sources

arXiv2013

Nitrogen Abundances and the Distance Moduli of the Pleiades and Hyades

Recent reanalyses of HIPPARCOS parallax data confirm a previously noted discrepancy with the Pleiades distance modulus estimated from main-sequence fitting in the color-magnitude diagram. One proposed explanation of this distance modulus discrepancy is a Pleiades He abundance that is significantly larger than the Hyades value. We suggest that, based on our theoretical and observational understanding of Galactic chemical evolution, nitrogen abundances may serve as a proxy for helium abundances of disk stars. Utilizing high-resolution near-UV Keck/HIRES spectroscopy, we determine N abundances in the Pleiades and Hyades dwarfs from NH features in the 3330 Ang region. While our Hyades N abundances show a modest 0.2 dex trend over a 800 K Teff range, we find the Pleiades N abundance (by number) is 0.13+/-0.05 dex lower than in the Hyades for stars in a smaller overlapping Teff range around 6000 K; possible systematic errors in the lower Pleiades N abundance result are estimated to be at the <0.10 dex level. Our results indicate [N/Fe]=0 for both the Pleiades and Hyades, consistent with the ratios exhibited by local Galactic disk field stars in other studies. If N production is a reliable tracer of He production in the disk, then our results suggest the Pleiades He abundance is no larger than that in the Hyades. This finding is supported by the relative Pleiades-Hyades C, O, and Fe abundances interpreted in the current context of Galactic chemical evolution, and is resistant to the effects on our derived N abundances of a He abundance difference like that needed to explain the Pleiades distance modulus discrepancy. A physical explanation of the Pleiades distance modulus discrepancy does not appear to be related to He abundance.

astro-ph.SR↗

arXiv2013

Fluctuations From Edge Defects in Superconducting Resonators

Superconducting resonators, used in astronomy and quantum computation, couple strongly to microscopic two-level defects. We monitor the microwave response of superconducting resonators and observe fluctuations in dissipation and resonance frequency. We present a unified model where the observed dissipative and dispersive effects can be explained as originating from a bath of fluctuating two-level systems. From these measurements, we quantify the number and distribution of the defects.

cond-mat.mes-hall↗

arXiv2013

Sputtered TiN films for superconducting coplanar waveguide resonators

We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundaries become clearer, and the strong compressive strain changes to weak tensile strain. The TiN films absorb a high concentration of contaminants including hydrogen, carbon, and oxygen when they are exposed to air after deposition. With the target-substrate distance set to 88 mm the contaminant levels increase from ~0.1% to ~10% as the pressure is increased from 2 to 9 mTorr. The contaminant concentrations also correlate with in-plane distance from the center of the substrate and increase by roughly two orders of magnitude as the target-substrate distance is increased from 88 mm to 266 mm. These contaminants are found to strongly influence the properties of TiN films. For instance, the resistivity of stoichiometric films increases by around a factor of 5 as the oxygen content increases from 0.1% to 11%. These results suggest that the sputtered TiN particle energy is critical in determining the TiN film properties, and that it is important to control this energy to obtain high-quality TiN films. Superconducting coplanar waveguide resonators made from a series of nearly stoichiometric films grown at pressures from 2 mTorr to 7 mTorr show an increase in intrinsic quality factor from ~10^4 to ~10^6 as the magnitude of the compressive strain decreases from nearly 3800 MPa to approximately 150 MPa and the oxygen content increases from 0.1% to 8%. The films with a higher oxygen content exhibit lower loss, but the nonuniformity of the oxygen incorporation hinders the use of sputtered TiN in larger circuits.

cond-mat.supr-con↗

arXiv2013

Excitation of superconducting qubits from hot non-equilibrium quasiparticles

Superconducting qubits probe environmental defects such as non-equilibrium quasiparticles, an important source of decoherence. We show that "hot" non-equilibrium quasiparticles, with energies above the superconducting gap, affect qubits differently from quasiparticles at the gap, implying qubits can probe the dynamic quasiparticle energy distribution. For hot quasiparticles, we predict a non-neligable increase in the qubit excited state probability P_e. By injecting hot quasiparticles into a qubit, we experimentally measure an increase of P_e in semi-quantitative agreement with the model and rule out the typically assumed thermal distribution.

cond-mat.supr-con↗

arXiv2013

Total wave based fast direct solver for volume scattering problems

We present a fast direct solver for the volume scattering problem of the Helmholtz equation. The algorithm is faster than existing methods. Moreover, discretization for our method is much simpler and more accurate than that for finite difference, finite elements, and integral equations.

math.NA↗

arXiv2012

Classification of a supersolid: Trial wavefunctions, Symmetry breakings and Excitation spectra

A state of matter is characterized by its symmetry breaking and elementary excitations. A supersolid is a state which breaks both translational symmetry and internal $ U(1) $ symmetry. Here, we review some past and recent works in phenomenological Ginsburg-Landau theories, ground state trial wavefunctions and microscopic numerical calculations. We also write down a new effective supersolid Hamiltonian on a lattice. The eigenstates of the Hamiltonian contains both the ground state wavefunction and all the excited states (supersolidon) wavefunctions. We contrast various kinds of supersolids in both continuous systems and on lattices, both condensed matter and cold atom systems. We provide additional new insights in studying their order parameters, symmetry breaking patterns, the excitation spectra and detection methods.

cond-mat.mtrl-sci↗

arXiv2012

Multiplexed dispersive readout of superconducting phase qubits

We introduce a frequency-multiplexed readout scheme for superconducting phase qubits. Using a quantum circuit with four phase qubits, we couple each qubit to a separate lumped-element superconducting readout resonator, with the readout resonators connected in parallel to a single measurement line. The readout resonators and control electronics are designed so that all four qubits can be read out simultaneously using frequency multiplexing on the one measurement line. This technology provides a highly efficient and compact means for reading out multiple qubits, a significant advantage for scaling up to larger numbers of qubits.

cond-mat.supr-con↗

arXiv2012

Balanced electric-magnetic dihole in Kaluza-Klein theory

We present a four-dimensional double-black-hole (or dihole) solution in Kaluza-Klein theory, describing a superposition of an electrically charged and a magnetically charged black hole. This system can be balanced for appropriately chosen parameters, and the resulting space-time is completely regular on and outside the event horizons. This solution was constructed using the inverse-scattering method in five-dimensional vacuum gravity, in which it describes a rotating black ring surrounding a static black hole on a Taub-NUT background space. Various properties of this solution are studied, from both a four- and five-dimensional perspective.

hep-th↗

arXiv2012

Flexible and tunable silicon photonic circuits on plastic substrates

Flexible microelectronics has shown tremendous promise in a broad spectrum of applications, especially those that cannot be addressed by conventional microelectronics in rigid materials and constructions1-3. These unconventional yet important applications range from flexible consumer electronics to conformal sensor arrays and biomedical devices. A recent successful paradigm shift in implementing flexible electronics is to physically transfer and bond highly integrated devices made in high-quality, crystalline semiconductor materials on to plastic materials4-8. Here we demonstrate a flexible form of silicon photonics on plastic substrates using the transfer-and-bond fabrication method. Photonic circuits including interferometers and resonators have been transferred onto flexible plastic substrates with preserved functionalities and performance. By mechanically deforming the flexible substrates, the optical characteristics of the devices can be tuned reversibly over a remarkably large range. The demonstration of the new flexible photonic system based on the silicon-on-plastic (SOP) material platform could open the door to a plethora of novel applications, including tunable photonics, optomechanical sensors and bio-mechanical and bio-photonic probes.

physics.optics↗

arXiv2012

Inner product quadratures

We introduce a n-term quadrature to integrate inner products of n functions, as opposed to a Gaussian quadrature to integrate 2n functions. We will characterize and provide computational tools to construct the inner product quadrature, and establish its connection to the Gaussian quadrature.

math.NA↗

arXiv2012

A doubly rotating black ring with dipole charge

We present a dipole-charged generalisation of the Pomeransky-Sen'kov black ring in five-dimensional Kaluza-Klein theory. It rotates in two independent directions, although one of the rotations has been tuned to achieve balance, so that the space-time does not contain any conical singularities. This solution was constructed using the inverse-scattering method in six-dimensional vacuum gravity. We then study various physical properties of this solution, with particular emphasis on the new features that the dipole charge introduces.

hep-th↗

arXiv2012

Rotating black rings on Taub-NUT

In this paper, we construct new solutions describing rotating black rings on Taub-NUT using the inverse-scattering method. These are five-dimensional vacuum space-times, generalising the Emparan-Reall and extremal Pomeransky-Sen'kov black rings to a Taub-NUT background space. When reduced to four dimensions in Kaluza-Klein theory, these solutions describe (possibly rotating) electrically charged black holes in superposition with a finitely separated magnetic monopole. Various properties of these solutions are studied, from both a five- and four-dimensional perspective.

hep-th↗

arXiv2012

Computing prime factors with a Josephson phase qubit quantum processor

A quantum processor (QuP) can be used to exploit quantum mechanics to find the prime factors of composite numbers[1]. Compiled versions of Shor's algorithm have been demonstrated on ensemble quantum systems[2] and photonic systems[3-5], however this has yet to be shown using solid state quantum bits (qubits). Two advantages of superconducting qubit architectures are the use of conventional microfabrication techniques, which allow straightforward scaling to large numbers of qubits, and a toolkit of circuit elements that can be used to engineer a variety of qubit types and interactions[6, 7]. Using a number of recent qubit control and hardware advances [7-13], here we demonstrate a nine-quantum-element solid-state QuP and show three experiments to highlight its capabilities. We begin by characterizing the device with spectroscopy. Next, we produces coherent interactions between five qubits and verify bi- and tripartite entanglement via quantum state tomography (QST) [8, 12, 14, 15]. In the final experiment, we run a three-qubit compiled version of Shor's algorithm to factor the number 15, and successfully find the prime factors 48% of the time. Improvements in the superconducting qubit coherence times and more complex circuits should provide the resources necessary to factor larger composite numbers and run more intricate quantum algorithms.

quant-ph↗

arXiv2012

Planar Superconducting Resonators with Internal Quality Factors above One Million

We describe the fabrication and measurement of microwave coplanar waveguide resonators with internal quality factors above 10 million at high microwave powers and over 1 million at low powers, with the best low power results approaching 2 million, corresponding to ~1 photon in the resonator. These quality factors are achieved by controllably producing very smooth and clean interfaces between the resonators' aluminum metallization and the underlying single crystal sapphire substrate. Additionally, we describe a method for analyzing the resonator microwave response, with which we can directly determine the internal quality factor and frequency of a resonator embedded in an imperfect measurement circuit.

cond-mat.mes-hall↗

arXiv2011

Dynamic quantum Kerr effect in circuit quantum electrodynamics

A superconducting qubit coupled to a microwave resonator provides a controllable system that enables fundamental studies of light-matter interactions. In the dispersive regime, photons in the resonator exhibit induced frequency and phase shifts which are revealed in the resonator transmission spectrum measured with fixed qubit-resonator detuning. In this static detuning scheme, the phase shift is measured in the far-detuned, linear dispersion regime to avoid measurement-induced demolition of the qubit quantum state. Here we explore the qubit-resonator dispersive interaction over a much broader range of detunings, by using a dynamic procedure where the qubit transition is driven adiabatically. We use resonator Wigner tomography to monitor the interaction, revealing exotic non-linear effects on different photon states, e.g., Fock states, coherent states, and Schrodinger cat states, thereby demonstrating a quantum Kerr effect in the dynamic framework.

cond-mat.supr-con↗

arXiv2011

Surface spin fluctuations probed with flux noise and coherence in Josephson phase qubits

We measure the dependence of qubit phase coherence and surface spin induced flux noise on inductor loop geometry. While wider inductor traces change neither the flux noise power spectrum nor the qubit dephasing time, increased inductance leads to a simultaneous increase in both. Using our protocol for measuring low frequency flux noise, we make a direct comparison between the flux noise spectrum and qubit phase decay, finding agreement within 10% of theory. The dependence of the measured flux noise on inductor geometry is consistent with a noise source correlation length between 6 and 400 um.

cond-mat.mes-hall↗

arXiv2011

Unbalanced Pomeransky-Sen'kov black ring

The Pomeransky-Sen'kov solution is well known to describe an asymptotically flat doubly rotating black ring in five dimensions, whose self-gravity is exactly balanced by the centrifugal force arising from the rotation in the ring direction. In this paper, we generalise this solution to the unbalanced case, in which there is in general a conical singularity in the space-time. Unlike a previous form of this solution presented in the literature, our form is much more compact. We describe in detail how this solution can be derived using the inverse-scattering method, and study its various properties. In particular, we show how various known limits can be recovered as special cases of this solution.

hep-th↗

arXiv2011

Surface loss simulations of superconducting coplanar waveguide resonators

Losses in superconducting planar resonators are presently assumed to predominantly arise from surface-oxide dissipation, due to experimental losses varying with choice of materials. We model and simulate the magnitude of the loss from interface surfaces in the resonator, and investigate the dependence on power, resonator geometry, and dimensions. Surprisingly, the dominant surface loss is found to arise from the metal-substrate and substrate-air interfaces. This result will be useful in guiding device optimization, even with conventional materials.

cond-mat.mes-hall↗