arXiv subjects

Yu-Yang Zhang

Publications and source records attributed to Yu-Yang Zhang.

18 recordsLinked to original sources

arXiv2026

Polymorphic crystallites model for monolayer amorphous materials

Modeling the atomic structure of amorphous materials has long been a critical challenge in materials science. Recent advances in monolayer amorphous materials enable direct observation of their atomic structures, paving the way for a better understanding of their atomic-scale models. Here, we investigate amorphous multielement monolayers using machine learning potential from first-principles total energies via energy-driven kinetic Monte Carlo based active-learning framework. A polymorphic crystallite model is proposed to describe the atomic configuration of monolayer amorphous boron nitride, as it consists of coexisting crystallite of $o-B_2N_2$ and $o-B_4N_4$ structural motifs. Generality of the polymorphic crystallite model is further validated in two other multielement monolayer amorphous systems. Monolayer amorphous LiCl shows coexisting hexagonal and tetragonal crystallites, while monolayer amorphous BCN contains a combination of graphene-like, h-BN-like, and borophene-like crystallites. These findings expand the classical picture of amorphous structure models and offer new insight into the microscopic structure of amorphous materials.

cond-mat.mtrl-sci↗

arXiv2024

Orbital Stability Study of the Taiji Space Gravitational Wave Detector

Space-based gravitational wave detection is extremely sensitive to disturbances. The Keplerian configuration cannot accurately reflect the variations in spacecraft configuration. Planetary gravitational disturbances are one of the main sources. Numerical simulation is an effective method to investigate the impact of perturbation on spacecraft orbits. This study shows that, in the context of the Taiji project, Earth's gravity is an essential factor in the change in heliocentric formation configuration, contributing to the relative acceleration between spacecrafts in the order of $\mathcal O(10^{-6})\,{\rm m\cdot s^{-2}}$. Considering 00:00:00 on 27 October 2032 as the initial orbiting moment, under the influence of Earth's gravitational perturbation, the maximum relative change in armlengths and variation rates of armlengths for Taiji is $1.6\times 10^{5}\,{\rm km}$, $32\,{\rm m\cdot s^{-1}}$, respectively, compared with the unperturbed Keplerian orbit. Additionally, by considering the gravitational perturbations of Venus and Jupiter, the armlength and relative velocity for Taiji are reduced by $16.01\%$ and $17.45\%$, respectively, compared with when only considering that of Earth. The maximum amplitude of the formation motion indicator changes with the orbit entry time. Results show that the relative velocity increase between the spacecrafts is minimal when the initial orbital moment occurs in July. Moreover, the numerical simulation results are inconsistent when using different ephemerides. The differences between ephemerides DE440 and DE430 are smaller than those between DE440 and DE421.

gr-qc↗

arXiv2023

Structure and mechanical properties of monolayer amorphous carbon and boron nitride

Amorphous materials exhibit various characteristics that are not featured by crystals and can sometimes be tuned by their degree of disorder (DOD). Here, we report results on the mechanical properties of monolayer amorphous carbon (MAC) and monolayer amorphous boron nitride (maBN) with different DOD. The pertinent structures are obtained by kinetic-Monte-Carlo (kMC) simulations using machine-learning potentials (MLP) with density-functional-theory (DFT)-level accuracy. An intuitive order parameter, namely the areal fraction Fx occupied by crystallites within the continuous random network, is proposed to describe the DOD. We find that Fx captures the essence of the DOD: Samples with the same Fx but different sizes and distributions of crystallites have virtually identical radial distributions functions as well as bond-length and bond-angle distributions. Furthermore, by simulating the fracture process with molecular dynamics, we found that the mechanical responses of MAC and maBN before fracture are solely determined by Fx and are insensitive to the sizes and specific arrangements of the crystallites. The behavior of cracks in the two materials is analyzed and found to mainly propagate in meandering paths in the CRN region and to be influenced by crystallites in distinct ways that toughen the material. The present results reveal the relation between structure and mechanical properties in amorphous monolayers and may provide a universal toughening strategy for 2D materials.

cond-mat.mtrl-sci↗

arXiv2023

Discovery and construction of surface kagome electronic states induced by p-d electronic hybridization

Kagome-lattice materials possess attractive properties for quantum computing applications, but their synthesis remains challenging. Herein, we show surface kagome electronic states (SKESs) on a Sn-terminated triangular Co3Sn2S2 surface, which are imprinted by vertical p-d electronic hybridization between the surface Sn (subsurface S) atoms and the buried Co kagome lattice network in the Co3Sn layer under the surface. Owing to the subsequent lateral hybridization of the Sn and S atoms in a corner-sharing manner, the kagome symmetry and topological electronic properties of the Co3Sn layer is proximate to the Sn surface. The SKESs and both hybridizations were verified via qPlus non-contact atomic force microscopy (nc-AFM) and density functional theory calculations. The construction of SKESs with tunable properties can be achieved by the atomic substitution of surface Sn (subsurface S) with other group III-V elements (Se or Te), which was demonstrated theoretically. This work exhibits the powerful capacity of nc-AFM in characterizing localized topological states and reveals the strategy for synthesis of large-area transition-metal-based kagome lattice materials using conventional surface deposition techniques.

cond-mat.mtrl-sci↗

arXiv2023

Twisted bilayer zigzag-graphene nanoribbon junctions with tunable edge states

Stacking two-dimensional layered materials such as graphene and transitional metal dichalcogenides with nonzero interlayer twist angles has recently become attractive because of the emergence of novel physical properties. Stacking of one-dimensional nanomaterials offers the lateral stacking offset as an additional parameter for modulating the resulting material properties. Here, we report that the edge states of twisted bilayer zigzag graphene nanoribbons (TBZGNRs) can be tuned with both the twist angle and the stacking offset. Strong edge state variations in the stacking region are first revealed by density functional theory (DFT) calculations. We construct and characterize twisted bilayer zigzag graphene nanoribbon (TBZGNR) systems on a Au(111) surface using scanning tunneling microscopy. A detailed analysis of three prototypical orthogonal TBZGNR junctions exhibiting different stacking offsets by means of scanning tunneling spectroscopy reveals emergent near-zero-energy states. From a comparison with DFT calculations, we conclude that the emergent edge states originate from the formation of flat bands whose energy and spin degeneracy are highly tunable with the stacking offset. Our work highlights fundamental differences between 2D and 1D twistronics and spurs further investigation of twisted one-dimensional systems.

cond-mat.mes-hall↗

arXiv2022

Strong and tunable magnetoelectric coupling in 2D trilayer heterostructures

The quest for electric-field control of nanoscale magnetic states such as skyrmions, which would impact the field of spintronics, has led to a challenging search for multiferroic materials or structures with strong magnetoelectric coupling and efficient electric-field control. Here we report a theoretical prediction that such phenomena can be realized in two-dimensional (2D) bilayer FE/PMM and trilayer FE/PMM/FE heterostructures (two-terminal and three-terminal devices), where FE is a 2D ferroelectric and PMM is a polar magnetic metal with strong spin-orbit coupling. Such a PMM has strong Dzyaloshinskii-Moriya interactions (DMI) that can generate skyrmions, while the FE can generate strong magnetoelectric coupling through polarization-polarization interactions. In trilayer heterostructures, contact to the metallic PMM layer enables multiple polarization configurations for electric-field control of skyrmions. We report density-functional-theory calculations for particular material choices that demonstrate the effectiveness of these arrangements, with the key driver being the polarization-polarization interactions between the PMM and FE layers. The present findings provide a method to achieve strong magnetoelectric coupling in the 2D limit and a new perspective for the design of related spintronics.

cond-mat.mtrl-sci↗

arXiv2022

Tunable Interband Transitions in Twisted h-BN/Graphene Heterostructures

In twisted h-BN/graphene heterostructures, the complex electronic properties of the fast-traveling electron gas in graphene are usually considered to be fully revealed. However, the randomly twisted heterostructures may also have unexpected transition behaviors, which may influence the device performance. Here, we study the twist angle-dependent coupling effects of h-BN/graphene heterostructures using monochromatic electron energy loss spectroscopy. We find that the moiré potentials alter the band structure of graphene, resulting in a redshift of the intralayer transition at the M-point, which becomes more pronounced up to 0.25 eV with increasing twist angle. Furthermore, the twisting of the Brillouin zone of h-BN relative to the graphene M-point leads to tunable vertical transition energies in the range of 5.1-5.6 eV. Our findings indicate that twist-coupling effects of van der Waals heterostructures should be carefully considered in device fabrications, and the continuously tunable interband transitions through the twist angle can serve as a new degree of freedom to design optoelectrical devices.

cond-mat.mes-hall↗

arXiv2022

The structure of amorphous two-dimensional materials: Elemental monolayer amorphous carbon versus binary monolayer amorphous boron nitride

The structure of amorphous materials has been debated since the 1930's as a binary question: amorphous materials are either Zachariasen continuous random networks (Z-CRNs) or Z-CRNs containing crystallites. It was recently demonstrated, however, that amorphous diamond can be synthesized in either form. Here we address the question of the structure of single-atom-thick amorphous monolayers. We reanalyze the results of prior simulations for amorphous graphene and report kinetic Monte Carlo simulations based on alternative algorithms. We find that crystallite-containing Z-CRN is the favored structure of elemental amorphous graphene, as recently fabricated, whereas the most likely structure of binary monolayer amorphous BN is altogether different than either of the two long-debated options: it is a compositionally disordered "pseudo-CRN" comprising a mix of B-N and noncanonical B-B and N-N bonds and containing "pseudocrystallites", namely honeycomb regions made of noncanonical hexagons. Implications for other non-elemental 2D and bulk amorphous materials are discussed.

cond-mat.mtrl-sci↗

arXiv2021

Thermal transport of amorphous carbon and boron-nitride monolayers

Two-dimensional (2D) materials like graphene and h-BN usually show high thermal conductivity, which enables rich applications in thermal dissipation and nanodevices. Disorder, on the other hand, is often present in 2D materials. Structural disorder induces localization of electrons and phonons and alters the electronic, mechanical, thermal, and magnetic properties. Here we calculate the in-plane thermal conductivity of both monolayer carbon and monolayer boron nitride in the amorphous form, by reverse nonequilibrium molecular dynamics simulations. We find that the thermal conductivity of both monolayer amorphous carbon (MAC) and monolayer amorphous boron nitride (ma-BN) are about two orders of magnitude smaller than their crystalline counterparts. Moreover, the ultralow thermal conductivity is independent of the temperature due to the extremely short phonon mean free path in these amorphous materials. The relation between the structure disorder and the reduction of the thermal conductivity is analyzed in terms of the vibrational density of states and the participation ratio. ma-BN shows strong vibrational localization across the frequency range, while MAC exhibits a unique extended G' mode at high frequency due to its sp2 hybridization and the broken E2g symmetry. The present results pave the way for potential applications of MAC and ma-BN in thermal management.

cond-mat.mtrl-sci↗

arXiv2021

Intrinsically Honeycomb-patterned Hydrogenated Graphene with Spin Polarized Edge-states

Since the advent of graphene ushered the era of two-dimensional materials, many forms of hydrogenated graphene have been reported, exhibiting diverse properties ranging from a tunable band gap to ferromagnetic ordering. Patterned hydrogenated graphene with micron-scale patterns has been fabricated by lithographic means. Here we report successful millimeter-scale synthesis of an intrinsically honeycomb patterned form of hydrogenated graphene on Ru(0001) by epitaxial growth followed by hydrogenation. Combining scanning tunneling microscopy observations with density-functional-theory (DFT) calculations, we reveal that an atomic-hydrogen layer intercalates between graphene and Ru(0001). The result is a hydrogen honeycomb structure that serves as a template for the final hydrogenation, which converts the graphene into graphane only over the template, yielding honeycomb-patterned hydrogenated graphene (HPHG). In effect, HPHG is a form of patterned graphane. DFT calculations find that the unhydrogenated graphene regions embedded in the patterned graphane exhibit spin-polarized edge states. This type of growth mechanism provides new pathways for the fabrication of intrinsically patterned graphene-based materials.

cond-mat.mtrl-sci↗

arXiv2021

Database Construction for Two-Dimensional Material-Substrate Interfaces

The interfacial structures and interactions of two-dimensional (2D) materials on solid substrates are of fundamental importance for the fabrication and application of 2D materials. However, selection of a suitable solid substrate to grow 2D material, determination and control of the 2D material-substrate interface remain a big challenge due to the large diversity of possible configurations. Here, we propose a computational framework to select an appropriate substrate for epitaxial growth of 2D material and to predict possible 2D material-substrate interface structures and orientations using density functional theory calculations performed for all non-equivalent atomic structures satisfying the symmetry constraints. The approach was validated by the correct prediction of three experimentally reported 2D material-substrate interface systems with only the given information of two parent materials. Several possible interface configurations are also proposed based on this approach. We therefore construct a database that contains these interface systems and has been continuously expanding. This database serves as preliminary guidance for epitaxial growth and stabilization of new materials in experiments.

cond-mat.mtrl-sci↗

arXiv2021

Observation of magnetic adatom-induced Majorana vortex and its hybridization with field-induced Majorana vortex in an iron-based superconductor

Braiding Majorana zero modes is essential for fault-tolerant topological quantum computing. Iron-based superconductors with nontrivial band topology have recently emerged as a surprisingly promising platform for creating distinct Majorana zero modes in magnetic vortices in a single material and at relatively high temperatures. The magnetic field-induced Abrikosov vortex lattice makes it difficult to braid a set of Majorana zero modes or to study the coupling of a Majorana doublet due to overlapping wave functions. Here we report the observation of the proposed quantum anomalous vortex with integer quantized vortex core states and the Majorana zero mode induced by magnetic Fe adatoms deposited on the surface. We observe its hybridization with a nearby field-induced Majorana vortex in iron-based superconductor FeTe0.55Se0.45. We also observe vortex-free Yu-Shiba-Rusinov bound states at the Fe adatoms with a weaker coupling to the substrate, and discover a reversible transition between Yu-Shiba-Rusinov states and Majorana zero mode by manipulating the exchange coupling strength. The dual origin of the Majorana zero modes, from magnetic adatoms and external magnetic field, provides a new single-material platform for studying their interactions and braiding in superconductors bearing topological band structures.

cond-mat.supr-con↗

arXiv2021

Electronic properties of silicene in BN/silicene van der Waals heterostructures

Silicene is a promising 2D Dirac material as a building block for van der Waals heterostructures (vdWHs). Here we investigate the electronic properties of hexagonal boron nitride/silicene (BN/Si) vdWHs using first-principles calculations. We calculate the energy band structures of BN/Si/BN heterostructures with different rotation angles and find that the electronic properties of silicene are retained and protected robustly by the BN layers. In BN/Si/BN/Si/BN heterostructure, we find that the band structure near the Fermi energy is sensitive to the stacking configurations of the silicene layers due to interlayer coupling. The coupling is reduced by increasing the number of BN layers between the silicene layers and becomes negligible in BN/Si/(BN)3/Si/BN. In (BN)n/Si superlattices, the band structure undergoes a conversion from Dirac lines to Dirac points by increasing the number of BN layers between the silicene layers. Calculations of silicene sandwiched by other 2D materials reveal that silicene sandwiched by low-carbon-doped boron nitride or HfO2 is semiconducting.

cond-mat.mtrl-sci↗

arXiv2020

Localized spin-orbit polaron in magnetic Weyl semimetal Co$_3$Sn$_2$S$_2$

The kagome lattice Co$_3$Sn$_2$S$_2$ exhibits the quintessential topological phenomena of a magnetic Weyl semimetal such as the chiral anomaly and Fermi-arc surface states. Probing its magnetic properties is crucial for understanding this correlated topological state. Here, using spin-polarized scanning tunneling microscopy/spectroscopy (STM/S), we report the discovery of localized spin-orbit polarons (SOPs) with three-fold rotation symmetry nucleated around single-S vacancies in Co$_3$Sn$_2$S$_2$. The SOPs carry a spin-polarized magnetic moment and a large orbital magnetization of a topological origin associated with the Berry phase and the persistent circulating current. Appreciable magneto-elastic coupling of the SOP is detected by atomic force microscope and STM. Our findings suggest that the SOPs can enhance magnetism and stability of the magnetic Weyl nodes for more robust time-reversal-symmetry-breaking topological phenomena. Controlled engineering of the SOPs may pave the way toward practical applications in functional quantum devices.

cond-mat.mtrl-sci↗

arXiv2020

Tunable giant magnetoresistance in a single-molecule junction

Controlling electronic transport through a single-molecule junction is crucial for molecular electronics or spintronics. In magnetic molecular devices, the spin degree-of-freedom can be used to this end since the magnetic properties of the magnetic ion centers fundamentally impact the transport through the molecules. Here we demonstrate that the electron pathway in a single-molecule device can be selected between two molecular orbitals by varying a magnetic field, giving rise to a tunable anisotropic magnetoresistance up to 93%. The unique tunability of the electron pathways is due to the magnetic reorientation of the transition metal center, resulting in a re-hybridization of molecular orbitals. We obtain the tunneling electron pathways by Kondo effect, which manifests either as a peak or a dip line shape. The energy changes of these spin-reorientations are remarkably low and less than one millielectronvolt. The large tunable anisotropic magnetoresistance could be used to control electronic transport in molecular spintronics.

cond-mat.mes-hall↗

arXiv2020

Atomically-Precise, Custom-Design Origami Graphene Nanostructures

The construction of atomically-precise carbon nanostructures holds promise for developing novel materials for scientific study and nanotechnology applications. Here we show that graphene origami is an efficient way to convert graphene into atomically-precise, complex, and novel nanostructures. By scanning-tunneling-microscope manipulation at low temperature, we repeatedly fold and unfold graphene nanoislands (GNIs) along arbitrarily chosen direction. A bilayer graphene stack featuring a tunable twist angle and a tubular edge connection between the layers are formed. Folding single-crystal GNIs creates tubular edges with specified chirality and one-dimensional electronic features similar to those of carbon nanotubes, while folding bi-crystal GNIs creates well-defined intramolecular junctions. Both origami structural models and electronic band structures were computed to complement analysis of the experimental results. The present atomically-precise graphene origami provides a platform for constructing novel carbon nanostructures with engineered quantum properties and ultimately quantum machines.

cond-mat.mtrl-sci↗

arXiv2020

Nearly quantized conductance plateau of vortex zero mode in an iron-based superconductor

Majorana zero-modes (MZMs) are spatially-localized zero-energy fractional quasiparticles with non-Abelian braiding statistics that hold a great promise for topological quantum computing. Due to its particle-antiparticle equivalence, an MZM exhibits robust resonant Andreev reflection and 2e2/h quantized conductance at low temperature. By utilizing variable-tunnel-coupled scanning tunneling spectroscopy, we study tunneling conductance of vortex bound states on FeTe0.55Se0.45 superconductors. We report observations of conductance plateaus as a function of tunnel coupling for zero-energy vortex bound states with values close to or even reaching the 2e2/h quantum conductance. In contrast, no such plateau behaviors were observed on either finite energy Caroli-de Genne-Matricon bound states or in the continuum of electronic states outside the superconducting gap. This unique behavior of the zero-mode conductance reaching a plateau strongly supports the existence of MZMs in this iron-based superconductor, which serves as a promising single-material platform for Majorana braiding at a relatively high temperature.

cond-mat.supr-con↗

arXiv2019

Orbital design of topological insulators from two-dimensional semiconductors

Two-dimensional (2D) materials have attracted much recent attention because they exhibit various distinct intrinsic properties/functionalities, which are, however, usually not interchangeable. Interestingly, here we propose a generic approach to convert 2D semiconductors, which are amply abundant, to 2D topological insulators (TIs), which are less available, via selective atomic adsorption and strain engineering. The approach is underlined by an orbital design principle that involves introducing an extrinsic s-orbital state into the intrinsic sp-bands of a 2D semiconductor, so as to induce s-p band inversion for a TI phase, as demonstrated by tight-binding model analyses. Remarkably, based on first-principles calculations, we apply this approach to convert the semiconducting monolayer CuS and CuTe into a TI by adsorbing Na and K respectively with a proper s-level energy, and CuSe into a TI by adsorbing a mixture of Na and K with a tuned s-level energy or by adsorbing either Na or K on a strained CuSe with a tuned p-level valence band edge. Our findings open a new door to the discovery of TIs by a predictive materials design, beyond finding a preexisting 2D TI.

cond-mat.mtrl-sci↗