arXiv subjects

Yuanbo Li

Publications and source records attributed to Yuanbo Li.

27 records · Page 2Linked to original sources

arXiv2023

Channel Measurement and Coverage Analysis for NIRS-Aided THz Communications in Indoor Environments

Due to large reflection and diffraction losses in the THz band, it is arguable to achieve reliable links in the none-line-of-sight (NLoS) cases. Intelligent reflecting surfaces, although are expected to solve the blockage problem and enhance the system connectivity, suffer from fabrication difficulty and operation complexity. In this work, non-intelligent reflecting surfaces (NIRS), which are simply made of costless metal foils and have no signal configuration capability, are adopted to enhance the signal strength and coverage in the THz band. Channel measurements are conducted in typical indoor scenarios at 306-321 GHz and 356-371 GHz bands to validate the effectiveness of the NIRS. Results measured with NIRS in different sizes show that large NIRS performs much better than small NIRS. Furthermore, by invoking the NIRS, the additional reflection loss can be reduced by more than 10~dB and the coverage ratio is increased by up to 39$\%$ for a 10~dB signal-to-noise ratio (SNR) threshold.

cs.IT↗

arXiv2023

Transformer-based GAN for Terahertz Spatial-Temporal Channel Modeling and Generating

Terahertz (THz) communications are envisioned as a promising technology for 6G and beyond wireless systems, providing ultra-broad continuous bandwidth and thus Terabit-per-second (Tbps) data rates. However, as foundation of designing THz communications, channel modeling and characterization are fundamental to scrutinize the potential of the new spectrum. Relied on time-consuming and costly physical measurements, traditional statistical channel modeling methods suffer from the problem of low accuracy with the assumed certain distributions and empirical parameters. In this paper, a transformer-based generative adversarial network modeling method (T-GAN) is proposed in the THz band, which exploits the advantage of GAN in modeling the complex distribution, and the powerful expressive capability of transformer structure. Experimental results reveal that the distribution of channels generated by the proposed T-GAN method shows good agreement with the original channels in terms of the delay spread and angular spread. Moreover, T-GAN achieves good performance in modeling the power delay angular profile, with 2.18 dB root-mean-square error (RMSE).

eess.SP↗

arXiv2023

300 GHz Dual-Band Channel Measurement, Analysis and Modeling in an L-shaped Hallway

The Terahertz (THz) band (0.1-10 THz) has been envisioned as one of the promising spectrum bands for sixth-generation (6G) and beyond communications. In this paper, a dual-band angular-resolvable wideband channel measurement in an indoor L-shaped hallway is presented and THz channel characteristics at 306-321 GHz and 356-371 GHz are analyzed. It is found that conventional close-in and alpha-beta path loss models cannot take good care of large-scale fading in the non-line-of-sight (NLoS) case, for which a modified alpha-beta path loss model for the NLoS case is proposed and verified in the NLoS case for both indoor and outdoor L-shaped scenarios. To describe both large-scale and small-scale fading, a ray-tracing (RT)-statistical hybrid channel model is proposed in the THz hallway scenario. Specifically in the hybrid model, the deterministic part in hybrid channel modeling uses RT modeling of dominant multi-path components (MPCs), i.e., LoS and multi-bounce reflected paths in the near-NLoS region, while dominant MPCs at far-NLoS positions can be deduced based on the developed statistical evolving model. The evolving model describes the continuous change of arrival angle, power and delay of dominant MPCs in the NLoS region. On the other hand, non-dominant MPCs are generated statistically. The proposed hybrid approach reduces the computational cost and solves the inaccuracy or even missing of dominant MPCs through RT at far-NLoS positions.

cs.IT↗

arXiv2023

300 GHz Wideband Channel Measurement and Analysis in a Lobby

The Terahertz (0.1-10 THz) band has been envisioned as one of the promising spectrum bands to support ultra-broadband sixth-generation (6G) and beyond communications. In this paper, a wideband channel measurement campaign in a 500- square-meter indoor lobby at 306-321 GHz is presented. The measurement system consists of a vector network analyzer (VNA)-based channel sounder, and a directional antenna equipped at the receiver to resolve multi-path components (MPCs) in the angular domain. In particular, 21 positions and 3780 channel impulse responses (CIRs) are measured in the lobby, including the line-of-sight (LoS), non-line-of-sight (NLoS) and obstructed-line-of-sight (OLoS) cases. The multi-path characteristics are summarized as follows. First, the main scatterers in the lobby include the glass, the pillar, and the LED screen. Second, best direction and omni-directional path losses are analyzed. Compared with the close-in path loss model, the optimal path loss offset in the alpha-beta path loss model exceeds 86 dB in the LoS case, and accordingly, the exponent decreases to 1.57 and below. Third, more than 10 clusters are observed in OLoS and NLoS cases, compared to 2.17 clusters on average in the LoS case. Fourth, the average power dispersion of MPCs is smaller in both temporal and angular domains in the LoS case, compared with the NLoS and OLoS counterparts. Finally, in contrast to hallway scenarios measured in previous works at the same frequency band, the lobby which is larger in dimension and square in shape, features larger path losses and smaller delay and angular spreads.

cs.IT↗

arXiv2023

Transfer Generative Adversarial Networks (T-GAN)-based Terahertz Channel Modeling

Terahertz (THz) communications are envisioned as a promising technology for 6G and beyond wireless systems, providing ultra-broad bandwidth and thus Terabit-per-second (Tbps) data rates. However, as foundation of designing THz communications, channel modeling and characterization are fundamental to scrutinize the potential of the new spectrum. Relied on physical measurements, traditional statistical channel modeling methods suffer from the problem of low accuracy with the assumed certain distributions and empirical parameters. Moreover, it is time-consuming and expensive to acquire extensive channel measurement in the THz band. In this paper, a transfer generative adversarial network (T-GAN) based modeling method is proposed in the THz band, which exploits the advantage of GAN in modeling the complex distribution, and the benefit of transfer learning in transferring the knowledge from a source task to improve generalization about the target task with limited training data. Specifically, to start with, the proposed GAN is pre-trained using the simulated dataset, generated by the standard channel model from 3rd generation partnerships project (3GPP). Furthermore, by transferring the knowledge and fine-tuning the pre-trained GAN, the T-GAN is developed by using the THz measured dataset with a small amount. Experimental results reveal that the distribution of PDPs generated by the proposed T-GAN method shows good agreement with measurement. Moreover, T-GAN achieves good performance in channel modeling, with 9 dB improved root-mean-square error (RMSE) and higher Structure Similarity Index Measure (SSIM), compared with traditional 3GPP method.

eess.SP↗

arXiv2022

Terahertz Channel Measurement and Analysis on a University Campus Street

Owning abundant bandwidth resource, the Terahertz (0.1-10 THz) band is a promising spectrum to support sixth-generation (6G) and beyond communications. As the foundation of channel study in the spectrum, channel measurement is ongoing in covering representative 6G communication scenarios and promising THz frequency bands. In this paper, a wideband channel measurement in an L-shaped university campus street is conducted at 306-321 GHz and 356-371 GHz. In particular, ten line-of-sight (LoS) and eight non-line-of-sight (NLoS) points are measured at the two frequency bands, respectively. In total, 6480 channel impulse responses (CIRs) are obtained from the measurement, based on which multi-path propagation in the L-shaped roadway in the THz band is elaborated to identify major scatterers of walls, vehicles, etc. in the environment and their impact on multi-path components (MPCs). Furthermore, outdoor THz channel characteristics in the two frequency bands are analyzed, including path losses, shadow fading, cluster parameters, delay spread and angular spread. In contrast with the counterparts in the similar outdoor scenario at lower frequencies, the results verify the sparsity of MPCs at THz frequencies and indicate smaller power spreads in both temporal and spatial domains in the THz band.

cs.IT↗

arXiv2022

300 GHz Channel Measurement and Characterization in the Atrium of a Building

With abundant bandwidth resource, the Terahertz band (0.1~THz to 10~THz) is envisioned as a key technology to realize ultra-high data rates in the 6G and beyond mobile communication systems. However, moving to the THz band, existing channel models dedicated for microwave or millimeter-wave bands are ineffective. To fill this research gap, extensive channel measurement campaigns and characterizations are necessary. In this paper, using a frequency-domain Vector Network Analyzer (VNA)-based sounder, a measurement campaign is conducted in the outdoor atrium of a building in 306-321 GHz band. The measured data are further processed to obtain the channel transfer functions (CTFs), parameters of multipath components (MPCs), as well as clustering results. Based on the MPC parameters, the channel characteristics, such as path loss, shadow fading, K-factor, etc., are calculated and analyzed. The extracted channel characteristics and numerology are helpful to study channel modeling and guide system design for THz communications.

cs.IT↗

arXiv2022

Terahertz Wireless Channels: A Holistic Survey on Measurement, Modeling, and Analysis

Terahertz (0.1-10 THz) communications are envisioned as a key technology for sixth generation (6G) wireless systems. The study of underlying THz wireless propagation channels provides the foundations for the development of reliable THz communication systems and their applications. This article provides a comprehensive overview of the study of THz wireless channels. First, the three most popular THz channel measurement methodologies, namely, frequency-domain channel measurement based on a vector network analyzer (VNA), time-domain channel measurement based on sliding correlation, and time-domain channel measurement based on THz pulses from time-domain spectroscopy (THz-TDS), are introduced and compared. Current channel measurement systems and measurement campaigns are reviewed. Then, existing channel modeling methodologies are categorized into deterministic, stochastic, and hybrid approaches. State-of-the-art THz channel models are analyzed, and the channel simulators that are based on them are introduced. Next, an in-depth review of channel characteristics in the THz band is presented. Finally, open problems and future research directions for research studies on THz wireless channels for 6G are elaborated.

cs.IT↗

arXiv2021

Channel Measurement and Ray-Tracing-Statistical Hybrid Modeling for Low-Terahertz Indoor Communications

TeraHertz (THz) communications are envisioned as a promising technology, owing to its unprecedented multi-GHz bandwidth. One fundamental challenge when moving to new spectrum is to understand the science of radio propagation and develop an accurate channel model. In this paper, a wideband channel measurement campaign between 130 GHz and 143 GHz is investigated in a typical meeting room. Directional antennas are utilized and rotated for resolving the multi-path components (MPCs) in the angular domain. With careful system calibration that eliminates system errors and antenna effects, a realistic power delay profile is developed. Furthermore, a combined MPC clustering and matching procedure with ray-tracing techniques is proposed to investigate the cluster behavior and wave propagation of THz signals. In light of the measurement results, physical parameters and insights in the THz indoor channel are comprehensively analyzed, including the line-of-sight path loss, power distributions, temporal and spatial features, and correlations among THz multi-path characteristics. Finally, a hybrid channel model that combines ray-tracing and statistical methods is developed for THz indoor communications. Numerical results demonstrate that the proposed hybrid channel model shows good agreement with the measurement and outperforms the conventional statistical and geometric-based stochastic channel model in terms of the temporal-spatial characteristics.

cs.IT↗