arXiv subjects

Yuanping Chen

Publications and source records attributed to Yuanping Chen.

At least 55 records · Page 3Linked to original sources

arXiv2017

A Class of topological nodal rings and its realization in carbon networks

Topological nodal rings can be classified into three types according to the slopes in their energy dispersion. The first two are made of type-I and II nodal points, respectively, while the third is made of both. In carbon networks, all three types can exist. Under strain, phase transitions from a topological metal to a semiconductor, take place, and at the transition points, these nodal rings shrink into type-I, II, and III semi-Dirac points. These topological features exhibit diverse electron-hole pocket patterns and Landau levels, which give rise to exotic transport properties.

cond-mat.mtrl-sci↗

arXiv2017

Three-dimensional Pentagon Carbon with a genesis of emergent fermions

Carbon, the basic building block of our universe, enjoys a vast number of allotropic structures. Owing to its bonding characteristic, most carbon allotropes possess the motif of hexagonal rings. Here, with first-principles calculations, we discover a new metastable three-dimensional carbon allotrope entirely composed of pentagon rings. The unique structure of this "Pentagon Carbon" leads to extraordinary electronic properties, making it a cornucopia of emergent topological fermions. Under lattice strain, Pentagon Carbon exhibits topological phase transitions, generating a series of novel quasiparticles, from isospin-1 triplet fermions, to triply-degenerate fermions, and further to concatenated Weyl-loop fermions. Its Landau level spectrum also exhibits distinct features, including a huge number of almost degenerate chiral Landau bands, implying pronounced magneto-transport signals. Our work not only discovers a remarkable carbon allotrope with highly rare structural motifs, it also reveals a fascinating hierarchical particle genesis with novel topological fermions beyond the Dirac and Weyl paradigm.

cond-mat.mtrl-sci↗

arXiv2016

Dirac Nodal Lines and Tilted Semi-Dirac Cones Coexisting in a Striped Boron Sheet

The enchanting Dirac fermions in graphene stimulated us to seek for other two-dimensional (2D) Dirac materials, and boron monolayers may be a good candidate. So far, a number of monolayer boron sheets have been theoretically predicted, and three have been experimentally prepared. However, none of them possesses Dirac electrons. Herein, by means of density functional theory (DFT) computations, we identified a new boron monolayer, namely hr-sB, with two types of Dirac fermions coexisting in the sheet: one type is related to Dirac nodal lines traversing Brillouin zone (BZ) with velocities approaching 106 m/s, the other is related to tilted semi-Dirac cones with strong anisotropy. This newly predicted boron monolayer consists of hexagon and rhombus stripes. With an exceptional stability comparable to the experimentally achieved boron sheets, it is rather optimistic to grow hr-sB on some suitable substrates such as the Ag (111) surface. The unique electronic properties induced by special bond characteristics also imply that this boron monolayer may be a good superconductor.

cond-mat.mes-hall↗

arXiv2016

Type-I and type-II Dirac fermions in graphene with nitrogen-molecule line defects

Recently, type-II Dirac fermions characterized by strongly titled Dirac cones have been proposed. The new fermions exhibit unique physical properties different from the type-I Dirac fermions in graphene, and thus attract tremendous attentions. Up to date, all type-II fermions are only found in the heavy compounds with strong spin obit coupling. Here, we propose that both type-I and type-II Dirac fermions can exist in the graphene embedding nitrogen-molecule line defects (NMLDs). While the types of Dirac fermions are determined by the size W of graphene nanoribbons between the line defects. By comparing the two types of Dirac fermions, their different physical properties and originations are revealed directly. Remarkably, the type-I Dirac points induce one Fermi arc corresponding to edge states along the armchair direction, while the type-II Dirac points induce two Fermi arcs corresponding to two sets of edge states along the zigzag direction. These results not only expand our views on the Dirac fermions in two-dimensional structures, but also extend their applications in electronics.

cond-mat.mtrl-sci↗

arXiv2016

Semi-Dirac Semimetal in Silicene Oxide

Semi-Dirac semimetal is a material exhibiting linear band dispersion in one direction and quadratic band dispersion in the orthogonal direction and, therefore, hosts massless and massive fermions at the same point in the momentum space. While a number of interesting physical properties have been predicted in semi-Dirac semimetals, it has been rare to realize such materials in condensed matters. Based on the fact that some honeycomb materials are easily oxidized or chemically absorb other atoms, here, we theoretically propose an approach of modifying their band structures by covalent addition of group-VI elements and strain engineering. We predict a silicene oxide with chemical formula of Si2O to be a candidate of semi-Dirac semimetal. Our approach is backed by the analysis and understanding of the effect of p-orbital frustration on the band structure of the graphene-like materials.

cond-mat.mes-hall↗

arXiv2016

New record of high ZT found in hybrid transition-metal-dichalcogenides

The search for thermoelectrics with higher figures of merit (ZT) will never stop due to the demand of heat harvesting. Single layer transition metal dichalcogenides (TMD), namely MX2 (where M is a transition metal and X is a chalcogen) that have electronic band gaps are among the new materials that have been the focus of such research. Here, we investigate the thermoelectric transport properties of hybrid armchair-edged TMDs nanoribbons, by using the nonequilibrium Green's function technique combined with the first principles and molecular dynamics methods. We find a ZT as high as 7.4 in hybrid MoS2/MoSe2 nanoribbons at 800K, creating a new record for ZT. Moreover, the hybrid interfaces by substituting X atoms are more efficient than those by substituting M atoms to tune the ZT. The origin of such a high ZT of hybrid nanoribbons is the high density of the grain boundaries: the hybrid interfaces decrease thermal conductance drastically without a large penalty to electronic conductance.

physics.comp-ph↗

arXiv2016

A systematic investigation of thermal conductivities of transition metal dichalcogenides

The thermal conductivities of MoS2 and WS2 have been reported by some experimental and theoretical studies, however, the results are different from each other. Here, thermal transport properties of twelve types of single layer transition metal dichalcogenides (TMDs) MX2 (M = Cr, Mo, W; X = O, S, Se, Te) are investigated systematically, by solving Boltzmann transport equation based on first-principle calculations. After accurate considering the size effect and boundary scattering, we find that our calculations can fit the former experimental results well. Moreover, diverse transport properties in TMDs are revealed, and an abnormal dependence of thermal conductivity on atomic mass is observed. In most MX2 structures, the thermal conductivities decrease with the increase of mass of atom M or X. However, the thermal conductivities of sulfides MS2 and selenides MSe2 increase as M changes from Cr to Mo to W, which is contradictory to our traditional understanding. A detailed calculation indicates that the abnormal trend is originated from the rapid increase of phonon relaxation time. Our studies provide important data and effective mechanism for thermal transport in TMDs.

physics.comp-ph↗

arXiv2016

Electron and phonon properties and gas storage in carbon honeycomb

A new kind of three-dimensional carbon allotropes, termed carbon honeycomb (CHC), has recently been synthesized [PRL 116, 055501 (2016)]. Based on the experimental results, a family of graphene networks are constructed, and their electronic and phonon properties are calculated by using first principles methods. All networks are porous metal with two types of electron transport channels along the honeycomb axis and they are isolated from each other: one type of channels is originated from the orbital interactions of the carbon zigzag chains and is topologically protected, while the other type of channels is from the straight lines of the carbon atoms that link the zigzag chains and is topologically trivial. The velocity of the electrons can reach ~10^6 m/s. Phonon transport in these allotropes is strongly anisotropic, and the thermal conductivities can be very low when compared with graphite by at least a factor of 15. Our calculations further indicate that these porous carbon networks possess high storage capacity for gaseous atoms and molecules in agreement with experiment.

cond-mat.mtrl-sci↗

arXiv2016

Phonon transport in single-layer Boron nanoribbons

Inspired by the successful synthesis of several allotropes, boron sheets have been one of the hottest spot areas of focus in various fields. Here, we study phonon transport in three types of boron nanoribbons with zigzag and armchair edges by using a non-equilibrium Green's function combined with first principles methods. Diverse transport properties are found in the nanoribbons. At the room temperature, their highest thermal conductance can be comparable with that of graphene, while the lowest thermal conductance is less than half of graphene's. The three boron sheets exhibit different anisotropic transport characteristics. Two of these sheets have stronger phonon transport abilities along the zigzag edges than the armchair edges, while in the case of the third, the results are reversed. With the analysis of phonon dispersion, bonding charge density, and simplified models of atomic chains, the mechanisms of the diverse phonon properties are discussed. Because all boron allotropes consists of hexagonal and triangular rings, many hybrid patterns can be constructed naturally without doping, adsorption, and defects. Our results are useful in materials and devices design using boron sheets for thermal management.

cond-mat.mtrl-sci↗

arXiv2016

Transition of thermal rectification in silicon nanocones

Current understanding of thermal rectification asserts that the rectification ratio (R), which measures the relative heat flux between two ends of a nanostructure, is determined by its geometric asymmetry. The higher the asymmetry, the higher the R. However, by using nonequilibrium molecular dynamics method we have calculated thermal transport in Si nanocones as an example, the results show that such an understanding may be incorrect and R may not increase monotonically with geometric asymmetry. Rather, R exhibits a sharp reverse when the vertex angle (θ) of the nanocone is approximately 90°. In other words, when θ > 90°, R decreases, rather than increasing. We show that this abnormal behavior is originated from a change in the thermal transport mechanism. At small θs, phonon transport is dominated by localized modes, especially for transport from tip to bottom. At large θs, however, these localized modes disappear, leading to R decrease.

cond-mat.mes-hall↗

arXiv2016

Versatile electronic properties and exotic edge states in single-layer tetragonal silicon carbides

Three single-layer tetragonal silicon carbides (SiC), termed as T1,T2 and T3, are proposed by density functional theory (DFT) computations. Although the three structures have the same topological geometry, they show versatile electronic properties from semiconductor (T1), semimetal (T2) to metal (T3).The versatile properties are originated from the rich bonds between Si and C atoms. The nanoribbons of the three SiC also show interesting electronic properties. Especially, T1 nanoribbons possess exotic edge states, where electrons only distribute on one edge's silicon or carbon atoms. The band gaps of the T1 nanoribbons are constant because of no interaction between the edge states.

cond-mat.mtrl-sci↗

arXiv2016

Resonant splitting in periodic T-shape photonic waveguides

Resonant splitting phenomena of photons in periodic T-shape waveguide structure are investigated by the Green's function method. It is found that, except for the (n-1)-fold resonant splitting in the low frequency region, (n-2)-fold resonant splitting occurs in the high frequency region of the transmission spectra. The (n-2)-fold resonant splitting peaks are induced by the high quasi-bound states where the photons are mainly localized in the constrictions rather than in the stubs. To this kind of quasi-bound state, the stub acts as a potential barrier rather than a well, which is the inverse of the case of the low quasi-bound states corresponding to the (n-1)-fold splitting peaks. These resonant peaks can be modulated by adjusting the periodic number and geometry of the waveguide structures.

cond-mat.mes-hall↗

arXiv2016

Atomic structure and electronic properties of folded graphene nanoribbons: a first-principles study

The atomic structure, stacking sequences and electronic structure of folded graphene nanoribbons (FGNRs) are investigated by first-principles calculations. It reveals that the common configurations of all FGNRs are racket-like structures including a nanotube-like edge and two flat nanoribbons. Interestingly, the two flat nanoribbons can form new stacking styles instead of the most stable AB-stacking sequences for bilayer nanoribbons. The stability of the FGNRs are associated with several factors of initial structures, such as interlayer distance of two nanoribbons, stacking sequences, edge styles, and width of nanoribbons. These folded nanoribbons can only be thermodynamically stable when the width reaches about 61 Å and 95 Å for the zigzag and armchair nanoribbons, respectively. In addition, the band gap of the folded zigzag graphene nanoribbons becomes about 0.17 eV, which provides a new way to open the band gap.

cond-mat.mes-hall↗

arXiv2016

Geometry, stability and thermal transport of hydrogenated graphene nanoquilts

Geometry, stability, and thermal transport of graphene nanoquilts folded by hydrogenation are studied using molecular dynamics simulations. The hydrogenated graphene nanoquilts show increased thermodynamic stability and better transport properties than folded graphene structures without hydrogenation. For the two-fold graphene nanoquilt, both geometry and thermal conductivity are very sensitive to the adsorbed hydrogen chains, which is interpreted by the red-shift of PDOS. For the multi-fold nanoquilts, their thermal conductivities can be tuned from 100% to 15% of pristine graphene, by varying the periodic number or length. Our results demonstrated that the hydrogenated graphene nanoquilts are quite suitable to be thermal management devices.

cond-mat.mes-hall↗

arXiv2016

Coexistence of flat bands and Dirac bands in a carbon-Kagome-lattice family

The Dirac bands and flat bands are difficult to coexist because they represent two extreme ends of electronic properties. However, in this paper, we propose a carbon-Kagome-lattice (CKL) family based on first-principles calculations, and the coexistence of Dirac and flat bands are observed in this series of three-dimensional carbon structures. The flat bands are originated from the orbital interactions of the Kagome lattices, while the Dirac bands are related to the carbon zigzag chains. A tight-binding model is used to explain the various band structures in different CKLs. The coexistence of flat and Dirac bands around the Fermi level implies that CKL structures maybe can serve as superconductors. In addition, electronic properties of the thinnest CKL slabs, only consisting of benzene rings, are studied. Flat bands are found in the band spectra of the two-dimensional structures, and split into spin-up and spin-down bands because of strong correlated effect in the case of hole doping.

cond-mat.mtrl-sci↗

arXiv2016

Towards Three-Dimensional Weyl-SurfaceSemimetals in Graphene Networks

Graphene as a two-dimensional (2D) topological Dirac semimetal has attracted much attention for its outstanding properties and potential applications. However, three-dimensional (3D) topological semimetals for carbon materials are still rare. Searching for such materials with salient physics has become a new direction for carbon research. Here, using first-principles calculations and tight-binding modeling, we study three types of 3D graphene networks whose properties inherit those of Dirac electrons in graphene. In the band structures of these materials, two flat Weyl surfaces appear in the Brillouin zone (BZ), which straddle the Fermi level and are robust against external strain. When the networks are cut, the resulting lower-dimensional slabs and nanowires remain to be semimetallic with Weyl line-like and point-like Fermi surfaces, respectively. Between the Weyl lines, flat surface bands emerge with strong magnetism when each surface carbon atom is passivated by one hydrogen atom. The robustness of these structures can be traced back to a bulk topological invariant, ensured by the sublattice symmetry, and to the one-dimensional (1D) Weyl semimetal behavior of the zigzag carbon chain, which has been the common backbone to all these structures. The flat Weyl-surface semimetals may enable applications in correlated electronics, as well as in energy storage, molecular sieve, and catalysis because of their good stability, porous geometry, and large superficial area.

cond-mat.mtrl-sci↗

arXiv2015

Thermal transport in MoS2/Graphene hybrid nanosheets

Heat dissipation is a very critical problem for designing nano-functional devices, including MoS2/Graphene heterojunctions. In this paper we investigate thermal transport in MoS2/Graphene hybrid nanosheets under various heating conditions, by using molecular dynamics simulation. Diverse transport processes and characteristics, depending on the conducting layers, are found in these structures. The thermal conductivities can be tuned by interlayer coupling, environment temperature and interlayer overlap. The highest thermal conductivity at room temperature is achieved as more than 5 times of that of single layer MoS2 when both layers are heated and 100% overlapped. Different transport mechanisms in the hybrid nanosheets are explained by phonon density of states, temperature distribution, and ITR. Our results not only could provide clues to master the heat transport in functional devices based on MoS2/Graphene heterojunctions, but also are useful to analyze thermal transport in other van der Waals hybrid nanosheets.

cond-mat.mes-hall↗

arXiv2015

Carbon Kagome lattice and orbital frustration-induced metal-insulator transition for optoelectronics

A three-dimensional elemental carbon Kagome lattice (CKL), made of only fourfold coordinated carbon atoms, is proposed based on first-principles calculations. Despite the existence of 60° bond angles in the triangle rings, widely perceived to be energetically unfavorable, the CKL is found to display exceptional stability comparable to that of C60. The system allows us to study the effects of triangular frustration on the electronic properties of realistic solids, and it demonstrates a metal-insulator transition from that of graphene to a direct gap semiconductor in the visible blue region. By minimizing s-p orbital hybridization, which is an intrinsic property of carbon, not only the band edge states become nearly purely frustrated p states, but also the band structure is qualitatively different from any known bulk elemental semiconductors. For example, the optical properties are similar to those of direct-gap semiconductors GaN and ZnO, whereas the effective masses are comparable or smaller than those of Si.

cond-mat.mtrl-sci↗