SearcharxivSearch

arXiv subjects

Yuansheng Tao

Publications and source records attributed to Yuansheng Tao.

9 recordsLinked to original sources

Integrated Terahertz Photonic Receiving Frontend with Link Noise Outperforming Electronics

Terahertz technology is a key enabler for sixth-generation (6G) wireless networks, yet its application is constrained by increasingly severe free-space loss at high frequencies. To efficiently retrieve weak signals at the receiving end, a compact frontend that features both a high-gain antenna and a low-noise signal-detection chain is critical. Current transistor-based THz electronic frontends face significant challenges in meeting these demands because both on-chip antenna efficiency and transistor noise performance degrade rapidly when approaching their cut-off frequencies. Photonic technology provides an alternative solution to circumvent the transistor bandwidth limit, yet most microwave photonic links to date exhibit noise performance substantially worse than state-of-the-art electronics. Here, we demonstrate low-noise integrated THz photonic frontends that deliver undegraded link noise performance across three major THz windows from 140 to 450 GHz, and outperform electronic frontends in the upper two windows. We achieve this through co-design of high-gain on-chip THz antenna array and broadband THz-optic modulator on a single thin-film lithium niobate (TFLN) chip, leading to distributed reception of free-space THz signals and continuous coherent build-up of the THz-optic conversion process with unprecedented efficiency. Combined with an efficient heterodyne detection chain, our integrated frontends exhibit effective isotropic noise figures of 13.6 and 16.2 dB at 250 and 450 GHz, respectively, both setting new benchmarks in their respective bands. We further demonstrate 6G-oriented multi-link communication up to 20 Git/s. Our integrated frontends represent a significant step towards compact, cost-effective and energy-efficient THz wireless systems in 6G and beyond.

physics.optics

Integrated lithium niobate microwave photonics: Driving next-generation wireless technologies

Integrated microwave photonics (MWP) offers a powerful paradigm for handling high-speed microwave signals within chip-scale optical systems. It provides a cost-effective solution to address bandwidth, tunability, and loss bottlenecks of electronics-based radio frequency (RF) systems. The recently emerged thin-film lithium niobate (TFLN) photonic platform, with its exceptional electro-optic (EO) properties, low loss, and scalability, has shown promise to reshape the MWP landscape. Here, we discuss the performance implications of state-of-the-art TFLN photonic devices for MWP applications and offer insights into the emerging trends for next-generation wireless networks. In particular, the unparalleled EO bandwidth enables direct optical generation, processing, and reception of millimeter-wave or even terahertz (THz) signals, significantly expanding the operation frequency range of MWP systems. The low drive voltages and linearity of TFLN modulators lead to an unprecedented operation regime of radio-over-fiber (RoF) systems, featuring net gain, low noise figure and large dynamic range, simultaneously. The availability of a versatile device toolkit, combined with low optical loss and scalability, further supports the transition from traditional tabletop MWP systems to chip-scale solutions, with advanced functionalities, compact footprint, and enhanced system robustness. As the TFLN industrial ecosystem rapidly matures, TFLN-based MWP technology has the potential to deliver transformative solutions to future 6G integrated sensing and communication networks.

physics.optics

Integrated photonic ultrawideband real-time spectrum sensing for 6G wireless networks

The sixth generation (6G) wireless networks require dynamic spectrum management to optimize the utilization of scarce spectral resources and support emerging integrated sensing and communication (ISAC) applications. This necessitates real-time spectrum sensing (RT-SS) capability with ultrawide measurement range, compact size, and low latency. Conventional electronic RT-SS solutions face critical challenges in operating across the millimeter-wave and sub-terahertz bands, which are essential spectra for 6G wireless. While photonic RT-SS has the potential to surpass this limitation, the current implementations feature limited bandwidths below 50 GHz and mostly rely on bulky dispersive fibers with high latency. Here, we address these challenges by developing an integrated photonic RT-SS system capable of ultrabroadband measurement from microwave to sub-terahertz bands, covering the full spectrum for 6G wireless. The photonic RT-SS circuit integrates a broadband electro-optic (EO) modulator for unknown signal loading, an EO tunable microring filter bank for high-speed parallel frequency-to-time mapping, as well as an EO comb for precise channel frequency referencing, all realized on a single thin-film lithium niobate chip. We achieve an unprecedented spectral measurement range beyond 120 GHz at a low latency of less than 100 ns. To validate the effectiveness of our photonic RT-SS system in future 6G scenes, we further propose a heuristic spectro-temporal resource allocation algorithm and conduct a proof-of-concept ISAC demonstration, where a radar adaptively access RT-SS-informed spectrally underutilized regions for high-quality target sensing under dynamic communication interferences. Our work presents a compact and cost-effective solution for efficient spectrum sharing and dynamic management in future 6G ISAC networks.

physics.optics

Ultrabroadband Integrated Photonics Empowering Full-Spectrum Adaptive Wireless Communications

The forthcoming sixth-generation (6G) and beyond (XG) wireless networks are poised to operate across an expansive frequency range from microwave, millimeter-wave to terahertz bands to support ubiquitous connectivity in diverse application scenarios. This necessitates a one-size-fits-all hardware solution that can be adaptively reconfigured within this wide spectrum to support full-band coverage and dynamic spectrum management. However, existing electrical or photonic-assisted wireless communication solutions see significant challenges in meeting this demand due to the limited bandwidths of individual devices and the intrinsically rigid nature of their system architectures. Here, we demonstrate adaptive wireless communications over an unprecedented frequency range spanning over 100 GHz, driven by a universal thin-film lithium niobate (TFLN) photonic wireless engine. Leveraging the strong Pockels effect and excellent scalability of the TFLN platform, we achieve monolithic integration of essential functional elements, including baseband modulation, broadband wireless-photonic conversion, and reconfigurable carrier/local signal generation. Powered by broadband tunable optoelectronic oscillators, our signal sources operate across a record-wide frequency range from 0.5 GHz to 115 GHz with high frequency stability and consistent coherence. Based on the broadband and reconfigurable integrated photonic solution, we realize, for the first time, full-link wireless communication across 9 consecutive bands, achieving record lane speeds of up to 100 Gbps. The real-time reconfigurability further enables adaptive frequency allocation, a crucial capability to ensure enhanced reliability in complex spectrum environments. Our proposed system marks a significant step towards future full-spectrum and omni-scenario wireless networks.

physics.optics

Broadband millimeter-wave frequency mixer based on thin-film lithium niobate photonics

Frequency mixers are fundamental components in modern wireless communication and radar systems, responsible for up- and down-conversion of target radio-frequency (RF) signals. Recently, photonic-assisted RF mixers have shown unique advantages over traditional electronic counterparts, including broad operational bandwidth, flat frequency response, and immunity to electromagnetic interference. However, current integrated photonic mixers face significant challenges in achieving efficient conversion at high frequencies, especially in millimeter-wave bands, due to the limitations of existing electro-optic (EO) modulators. Additionally, high-frequency local oscillators in the millimeter-wave range are often difficult to obtain and expensive, leading to unsatisfactory cost and restricted operational bandwidth in practice. In this paper, we harness the exceptional EO property and scalability of thin-film lithium niobate (TFLN) photonic platform to implement a high-performance harmonic reconfigurable millimeter-wave mixer. The TFLN photonic circuit integrates a broadband EO modulator that allows for extensive frequency coverage, and an EO frequency comb source that significantly reduces the required carrier frequency of the local oscillator. We experimentally demonstrate fully reconfigurable frequency down-conversion across a broad operational bandwidth ranging from 20 GHz to 67 GHz, with a large intermediate frequency of 20 GHz, as well as up-conversion to frequencies of up to 110 GHz. Our integrated photonic mixing system shows dramatically improved bandwidth performance, along with competitive indicators of frequency conversion efficiency and spurious suppression ratio, positioning it as a promising solution for future millimeter-wave transceivers in next-generation communication and sensing systems.

physics.optics

Slow light silicon modulator beyond 110 GHz bandwidth

Silicon modulators are key components in silicon photonics to support the dense integration of electro-optic (EO) functional elements on a compact chip for various applications including high-speed data transmission, signal processing, and photonic computing. Despite numerous advances in promoting the operation speed of silicon modulators, a bandwidth ceiling of 67 GHz emerges in practices and becomes an obstacle to paving silicon photonics toward Tbps level data throughput on a single chip. Here, we theoretically propose and experimentally demonstrate a design strategy for silicon modulators by employing the slow light effect, which shatters the present bandwidth ceiling of silicon modulators and pushes its limit beyond 110 GHz in a small footprint. The proposed silicon modulator is built on a coupled-resonator optical waveguide (CROW) architecture, in which a set of Bragg gratings are appropriately cascaded to give rise to a slow light effect. By comprehensively balancing a series of merits including the group index, photon lifetime, electrical bandwidth, and losses, we found the modulators can benefit from the slow light for better modulation efficiency and compact size while remaining their bandwidth sufficiently high to support ultra-high-speed data transmission. Consequently, we realize a modulator with an EO bandwidth of 110 GHz in a length of 124 μm, and demonstrate a data rate beyond 110 Gbps by applying simple on-off keying modulation for a DSP-free operation. Our work proves that silicon modulators beyond 110 GHz are feasible, thus shedding light on the potentials of silicon photonics in ultra-high-bandwidth applications such as data communication, optical interconnection, and photonic machine learning.

physics.optics

Fully on-chip microwave photonics system

Microwave photonics (MWP), harnessing the tremendous bandwidth of light to generate, process and measure wideband microwave signals, are poised to spark a new revolution for the information and communication fields. Within the past decade, new opportunity for MWP has emerged driven by the advances of integrated photonics. However, despite significant progress made in terms of integration level, a fully on-chip MWP functional system comprising all the necessary photonic and electronic components, is yet to be demonstrated. Here, we break the status quo and provide a complete on-chip solution for MWP system, by exploiting hybrid integration of indium phosphide, silicon photonics and complementary metal-oxide-semiconductor (CMOS) electronics platforms. Applying this hybrid integration methodology, a fully chip-based MWP microwave instantaneous frequency measurement (IFM) system is experimentally demonstrated. The unprecedented integration level brings great promotion to the compactness, reliability, and performances of the overall MWP IFM system, including a wide frequency measurement range (2-34 GHz), ultralow estimation errors (10.85 MHz) and a fast response speed (0.3 ns). Furthermore, we deploy the chip-scale MWP IFM system into realistic application tasks, where diverse microwave signals with rapid-varying frequencies at X-band (8-12 GHz) are accurately identified in real-time. This demonstration marks a milestone for the development of integrated MWP, by providing the technology basis for the miniaturization and massive implementations of various MWP functional systems.

physics.app-ph

Sub-milliwatt, widely-tunable coherent microcomb generation with feedback-free operation

Microcombs are revolutionizing optoelectronics by providing parallelized, mutually coherent wavelength channels for time-frequency metrology and information processing. To implement this essential function in integrated photonic systems, it is desirable to drive microcombs directly with an on-chip laser in a simple and flexible way. However, two major difficulties are preventing this goal: 1) generating mode-locked comb states usually requires a significant amount of pump power and 2) the requirement to align laser and resonator frequency significantly complicates operation and limits the tunability of the comb lines. Here, we address these problems by using microresonators on an AlGaAs on-insulator platform to generate dark-pulse microcombs. This highly nonlinear platform dramatically relaxes fabrication requirements and leads to a record-low pump power of less than 1 mW for coherent comb generation. Dark-pulse microcombs facilitated by thermally-controlled avoided mode-crossings are accessed by direct DFB laser pumping. Without any feedback or control circuitries, the comb shows good coherence and stability. This approach also leads to an unprecedented wide chirping range of all the comb lines. Our work provides a route to realize power-efficient, simple and reconfigurable microcombs that can be seamlessly integrated with a wide range of photonic systems.

physics.optics

Bridging microcombs and silicon photonic engines for optoelectronics systems

Microcombs have sparked a surge of applications over the last decade, ranging from optical communications to metrology. Despite their diverse deployment, most microcomb-based systems rely on a tremendous amount of bulk equipment to fulfill their desired functions, which is rather complicated, expensive and power-consuming. On the other hand, foundry-based silicon photonics (SiPh) has had remarkable success in providing versatile functionality in a scalable and low-cost manner, but its available chip-based light sources lack the capacity for parallelization, which limits the scope of SiPh applications. Here, we bridge these two technologies by using a power-efficient and operationally-simple AlGaAs on insulator microcomb source to drive CMOS SiPh engines. We present two important chip-scale photonic systems for optical data transmissions and microwave photonics respectively: The first microcomb-based integrated photonic data link is demonstrated, based on a pulse-amplitude 4-level modulation scheme with 2 Tbps aggregate rate, and a highly reconfigurable microwave photonic filter with unprecedented integration level is constructed, using a time stretch scheme. Such synergy of microcomb and SiPh integrated components is an essential step towards the next generation of fully integrated photonic systems.

physics.app-ph