arXiv subjects

Yuantong Gu

Publications and source records attributed to Yuantong Gu.

35 records · Page 2Linked to original sources

arXiv2018

Chapter 7 - Thermal Conductivity of Diamond Nanothread

This chapter introduces the thermal conductivity of a novel one-dimensional carbon nanostructure - diamond nanothread. It starts by introducing the family of the diamond nanothread as acquired from density functional theory calculations and also its successful experimental synthesisation. It then briefs the mechanical properties of the diamond nanothreads as a fundamental for their engineering applications. After that, it focuses on the thermal transport properties of the diamond nanothreads by examining the influences from various parameters such as size, geometry, and temperature. Then, the application of diamond nanothread as reinforcements for nanocomposites is discussed. By the end of the chapter, future directions and their potential applications are discussed.

cond-mat.mtrl-sci↗

arXiv2018

The morphology and temperature dependent tensile properties of diamond nanothreads

The ultrathin one-dimensional sp3 diamond nanothreads (NTHs), as successfully synthesised recently, have greatly augmented the interests from the carbon community. In principle, there can exist different stable NTH structures. In this work, we studied the mechanical behaviours of three representative NTHs using molecular dynamics simulations. It is found that the mechanical properties of NTH can vary significantly due to morphology differences, which are believed to originate from the different stress distributions determined by its structure. Further studies have shown that the temperature has a significant impact on the mechanical properties of the NTH. Specifically, the failure strength/strain decreases with increasing temperature, and the effective Young's modulus appears independent of temperature. The remarkable reduction of the failure strength/strain is believed to be resulted from the increased bond re-arrangement process and free lateral vibration at high temperatures. In addition, the NTH is found to have a relatively high bending rigidity, and behaves more like flexible elastic rod. This study highlights the importance of structure-property relation and provides a fundamental understanding of the tensile behaviours of different NTHs, which should shed light on the design and also application of the NTH-based nanostructures as strain sensors and mechanical connectors.

cond-mat.mtrl-sci↗

arXiv2018

Graphene and Carbon Nanotube Hybrid Structure: A Review

Graphene has been reported with record-breaking properties which have opened up huge potential applications. Considerable amount of researches have been devoted to manipulating or modify the properties of graphene to target a more smart nanoscale device. Graphene and carbon nanotube hybrid structure (GNHS) is one of the promising graphene derivate. The synthesis process and the mechanical properties are essential for the GNHS based devices. Therefore, this review will summarise the recent progress of the highly ordered GNHS synthesis/assembly, and discuss the mechanical properties of GNHS under various conditions as obtained from molecular dynamics simulations.

cond-mat.mtrl-sci↗

arXiv2018

Failure mechanism of monolayer graphene under hypervelocity impact of spherical projectile

The excellent mechanical properties of graphene have enabled it as appealing candidate in the field of impact protection or protective shield. By considering a monolayer graphene membrane, in this work, we assessed its deformation mechanisms under hypervelocity impact (from 2 to 6 km/s), based on a serial of in silico studies. It is found that the cracks are formed preferentially in the zigzag directions which are consistent with that observed from tensile deformation. Specifically, the boundary condition is found to exert an obvious influence on the stress distribution and transmission during the impact process, which eventually influences the penetration energy and crack growth. For similar sample size, the circular shape graphene possesses the best impact resistance, followed by hexagonal graphene membrane. Moreover, it is found the failure shape of graphene membrane has a strong relationship with the initial kinetic energy of the projectile. The higher kinetic energy, the more number the cracks. This study provides a fundamental understanding of the deformation mechanisms of monolayer graphene under impact, which is crucial in order to facilitate their emerging future applications for impact protection, such as protective shield from orbital debris for spacecraft.

cond-mat.mtrl-sci↗

arXiv2018

Thermal conduction of one-dimensional carbon nanomaterials and nanoarchitectures

This review summarizes the current studies of the thermal transport properties of one-dimensional (1D) carbon nanomaterials and nanoarchitectures. Considering different hybridization states of carbon, emphases are laid on a variety of 1D carbon nanomaterials, such as diamond nanothreads, penta-graphene nanotubes, supernanotubes, and carbyne. Based on experimental measurements and simulation/calculation results, we discuss the dependence of the thermal conductivity of these 1D carbon nanomaterials on a wide range of factors, including the size effect, temperature influence, strain effect, and others. This review provides an overall understanding of the thermal transport properties of 1D carbon nanomaterials and nanoarchitectures, which paves the way for effective thermal management at nanoscale.

cond-mat.mtrl-sci↗

arXiv2017

Graphene helicoid as novel nanospring

Advancement of nanotechnology has greatly accelerated the miniaturization of mechanical or electronic devices. This work proposes a new nanoscale spring - a graphene nanoribbon-based helicoid (GH) structure by using large-scale molecular dynamics simulation. It is found that the GH structure not only possesses an extraordinary high tensile deformation capability, but also exhibits unique features not accessible from traditional springs. Specifically, its yield strain increases when its inner radius is enlarged, which can exceed 1000%, and it has three elastic deformation stages including the initial delamination, stable delamination and elastic deformation. Moreover, the failure of the GH is found to be governed by the failure of graphene nanoribbon and the inner edge atoms absorb most of the tensile strain energy. Such fact leads to a constant elastic limit force (corresponding to the yield point) for all GHs. This study has provided a comprehensive understanding of the tensile behaviors of GH, which opens the avenue to design novel nanoscale springs based on 2D nanomaterials.

cond-mat.mtrl-sci↗

arXiv2017

Mechanical Properties of Penta-Graphene Nanotubes

Penta-graphene is the name given to a novel puckered monolayer of carbon atoms tightly packed into an inerratic pentagonal network, theoretically, which exhibits excellent thermal and mechanical stability and can be rolled into penta-graphene nanotubes (PGNTs). Herein, we perform the first simulation study of mechanical properties of PGNTs under uniaxial tension. In addition to comparable mechanical properties with that of carbon nanotubes (CNT), it is found that PGNTs possess promising extensibility with typical plastic behavior due to the irreversible pentagon-to-polygon structural transformation and the hexagon carbon ring becomes the dominating structural motif after the transformation. The plastic characteristic of PGNTs is inherent with strain-rate and tube-diameter independences. Moreover, within ultimate temperature (T<1100 K), tensile deformed PGNTs manifest similar phase transition with an approximate transition ratio from pentagon to hexagon. The intrinsic insight provides a fundamental understanding of mechanic properties of PGNTs, which should open up a novel perspective for the design of plastic carbon-based nanomaterials.

cond-mat.mtrl-sci↗

arXiv2017

The Best Features of Diamond Nanothread for Nanofiber Application

Carbon fibers, especially those constructed from carbon nanotubes (CNTs), have attracted intensive interests from both scientific and engineering communities due to their outstanding physical properties. In this workHere we report, we find that the recently synthesized recently synthesized ultrathin diamond nanothread (DNT) not only possesses excellent torsional deformation capability, but also has excellent interfacial load transfer efficiency. Comparing with the (10,10) carbon nanotube bundles, (1) By considering a seven strand fiber, the flattening of nanotubes as observed in (10,10) CNT bundles is not observed in DNTdiamond nanothread bundle, which . This endows the DNT bundle withleads to a high torsional elastic limit that is almost three times higherfour times as obtained from the (10,10) CNT bundle. Pull-out tests reveal that (2) Pull-out tests reveal that tthe DNT diamond nanothread bundle has has an interface transfer load of more than twice that of the CNT carbon naontube bundle, corresponding to an order of magnitude higher in terms of . (3) Tthe interfacial shear strength of the DNT bundle is an order of magnitude higher than that of the CNT bundle. Such high interface load transfer efficiency is attributed to the zigzag morphology of DNT, which introduces a strong mechanical interlocking effect at the interface through the stick-slip motion (totally different from the load transfer mechanism in CNT bundle). The aforementioned three aspects are commonly used to gauge the performance of fibers. Obviously,These intriguing features enable DNT diamond nanothread as exhibits excellent potential candidate for constructing next generation carbon fibers.

cond-mat.mtrl-sci↗

arXiv2017

Accurate Multi-physics Numerical Analysis of Particle Preconcentration Based on Ion Concentration Polarization

This paper studies mechanism of preconcentration of charged particles in a straight micro-channel embedded with permselective membranes, by numerically solving coupled transport equations of ions, charged particles and solvent fluid without any simplifying assumptions. It is demonstrated that trapping and preconcentration of charged particles are determined by the interplay between drag force from the electroosmotic fluid flow and the electrophoretic force applied trough the electric field. Several insightful characteristics are revealed, including the diverse dynamics of co-ions and counter ions, replacement of co-ions by focused particles, lowered ion concentrations in particle enriched zone, and enhanced electroosmotic pumping effect etc. Conditions for particles that may be concentrated are identified in terms of charges, sizes and electrophoretic mobilities of particles and co-ions. Dependences of enrichment factor on cross-membrane voltage, initial particle concentration and buffer ion concentrations are analyzed and the underlying reasons are elaborated. Finally, post priori a condition for validity of decoupled simulation model is given based on charges carried by focused charge particles and that by buffer co-ions. These results provide important guidance in the design and optimization of nanofluidic preconcentration and other related devices.

physics.flu-dyn↗

arXiv2016

From Brittle to Ductile: A Structure Dependent Ductility of Diamond Nanothread

As a potential building block for the next generation of devices or multifunctional materials that are spreading almost every technology sector, one-dimensional (1D) carbon nanomaterial has received intensive research interests. Recently, a new ultra-thin diamond nanothread (DNT) has joined this palette, which is a 1D structure with poly-benzene sections connected by Stone-Wales (SW) transformation defects. Using large-scale molecular dynamics simulations, we found that this sp3 bonded DNT can transit from a brittle to a ductile characteristic by varying the length of the poly-benzene sections, suggesting that DNT possesses entirely different mechanical responses than other 1D carbon allotropies. Analogously, the SW defects behave like a grain boundary that interrupts the consistency of the poly-benzene sections. For a DNT with a fixed length, the yield strength fluctuates in the vicinity of a certain value and is independent of the "grain size". On the other hand, both yield strength and yield strain show a clear dependence on the total length of DNT, which is due to the fact that the failure of the DNT is dominated by the SW defects. Its highly tunable ductility together with its ultra-light density and high Young's modulus makes diamond nanothread ideal for creation of extremely strong three-dimensional nano-architectures.

cond-mat.mtrl-sci↗

arXiv2016

Diamond nanothread as a new reinforcement for nanocomposites

This work explores the application of a new one-dimensional carbon nanomaterial, the diamond nanothread (DNT), as a reinforcement for nanocomposites. Owing to the existence of Stone-Wales transformation defects, the DNT intrinsically possesses irregular surfaces, which is expected to enhance the non-covalent interfacial load transfer. Through a series of in silico pull-out studies of the DNT in polyethylene (PE) matrix, we found that the load transfer between DNT and PE matrix is dominated by the non-covalent interactions, in particular the van der Waals interactions. Although the hydrogenated surface of the DNT reduces the strength of the van der Waals interactions at the interface, the irregular surface of the DNT can compensate for the weak bonds. These factors lead to an interfacial shear strength of the DNT/PE interface comparable with that of the carbon nanotube (CNT)/PE interface. Our results show that the DNT/PE interfacial shear strength remains high even as the number of Stone-Wales transformation defects decreases. It can be enhanced further by increasing the PE density or introduction of functional groups to the DNT, both of which greatly increase the non-covalent interactions.

cond-mat.mtrl-sci↗

arXiv2015

Two-dimensional Graphene Heterojunctions: the Tunable Mechanical Properties

We report the mechanical properties of different two-dimensional carbon heterojunctions (HJs) made from graphene and various stable graphene allotropes, including α-, β-, γ- and 6612-graphyne (GY), and graphdiyne (GDY). It is found that all HJs exhibit a brittle behaviour except the one with α-GY, which however shows a hardening process due to the formation of triple carbon rings. Such hardening process has greatly deferred the failure of the structure. The yielding of the HJs is usually initiated at the interface between graphene and graphene allotropes, and monoatomic carbon rings are normally formed after yielding. By varying the locations of graphene (either in the middle or at the two ends of the HJs), similar mechanical properties have been obtained, suggesting insignificant impacts from location of graphene allotropes. Whereas, changing the types and percentages of the graphene allotropes, the HJs exhibit vastly different mechanical properties. In general, with the increasing graphene percentage, the yield strain decreases and the effective Young's modulus increases. Meanwhile, the yield stress appears irrelevant with the graphene percentage. This study provides a fundamental understanding of the tensile properties of the heterojunctions that are crucial for the design and engineering of their mechanical properties, in order to facilitate their emerging future applications in nanoscale devices, such as flexible/stretchable electronics.

cond-mat.mtrl-sci↗

arXiv2015

Thermal conductivity of a new carbon nanotube analogue: the diamond nanothread

Based on the non-equilibrium molecular dynamics simulations, we have studied the thermal conductivities of a novel ultra-thin one-dimensional carbon nanomaterial - diamond nanothread (DNT). Unlike single-wall carbon nanotube (CNT), the existence of the Stone-Wales transformations in DNT endows it with richer thermal transport characteristics. There is a transition from wave-dominated to particle-dominated transport region, which depends on the length of poly-benzene rings. However, independent of the transport region, strong length dependence in thermal conductivity is observed in DNTs with different lengths of poly-benzene ring. The distinctive SW characteristic in DNT provides more degrees of freedom to tune the thermal conductivity not found in the homogeneous structure of CNT. Therefore, DNT is an ideal platform to investigate various thermal transport mechanisms at the nanoscale. Its high tunability raises the potential to design DNTs for different applications, such as thermal connection and temperature management.

cond-mat.mtrl-sci↗

arXiv2015

Tuning the Resonance Properties of 2D Carbon Nanotube Networks towards Mechanical Resonator

The capabilities of the mechanical resonator-based nanosensors in detecting ultra-small mass or force shifts have driven a continuing exploration of the palette of nanomaterials for such application purpose. Based on large-scale molecular dynamics simulations, we have assessed the applicability of a new class of carbon nanomaterials for the nanoresonator usage, i.e., the single wall carbon nanotube (SWNT) network. It is found that the SWNT networks inherit the excellent mechanical properties from the constituent SWNTs, possessing a high natural frequency. However, although a high quality factor is suggested from the simulation results, it is hard to obtain an unambiguous Q-factor due to the existence of vibration modes in addition to the dominant mode. The nonlinearities resulting from these extra vibration modes are found to exist uniformly under various testing conditions including different initial actuations and temperatures. Further testing shows that these modes can be effectively suppressed through the introduction of axial strain, leading to an extremely high quality factor in the order of 109 estimated from the SWNT network with 2% tensile strain. Additional studies indicate that the carbon rings connecting the SWNTs can also be used to alter the vibrational properties of the resulting network. This study suggests that the SWNT network can be a good candidate for the applications as nanoresonators.

cond-mat.mtrl-sci↗

arXiv2015

Carbon Nanotube-based Super Nanotube: Tailorable Thermal Conductivity at Three-dimensional

The advancements of nanomaterials or nanostructures have enabled the possibility of fabricating multifunctional materials that hold great promises in engineering applications. The carbon nanotube (CNT)-based nanostructure is one representative building block for such multifunctional materials. Based on a series of in silico studies, we report the tailorability of the thermal conductivity of a three-dimensional CNT-based nanostructure, i.e., the single wall CNT (SWNT)-based super nanotube (ST). It is shown that the thermal conductivity of STs varies with different connecting carbon rings, and the ST with longer constituent SWNTs and larger diameter yield to a smaller thermal conductivity. Further results reveal that the inverse of the ST thermal conductivity exhibits a good linear relationship with the inverse of its length. Particularly, it is found that the thermal conductivity exhibits an approximately proportional relationship with the inverse of the temperature, but appears insensitive to the axial strain due to its Poisson ratio. These results, in the one hand, provide a fundamental understanding of the thermal transport properties of the super carbon nanotubes conductivities of ST, and in the other hand shed lights on their future design or fabrication and engineering applications.

physics.comp-ph↗

arXiv2012

Beat Phenomena in Metal Nanowires, and their Implications for Resonance-Based Elastic Property Measurements

The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110] oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire,i.e., [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt).The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio.Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small.Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one,which implies the experimental predictions of Young's modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young's modulus as obtained via resonance testing.

cond-mat.mes-hall↗

arXiv2012

A fundamental numerical and theoretical study for the vibrational properties of nanowires

Based on the molecular dynamics (MD) simulation and the classical Euler-Bernoulli beam theory, a fundamental study of the vibrational performance of the Ag nanowire (NW) is carried out. A comprehensive analysis of the quality (Q)-factor, natural frequency, beat vibration, as well as high vibration mode is presented. Two excitation approaches, i.e., velocity excitation and displacement excitation, have been successfully implemented to achieve the vibration of NWs. Upon these two kinds of excitations, consistent results are obtained, i.e., the increase of the initial excitation amplitude will lead to a decrease to the Q-factor, and moderate plastic deformation could increase the first natural frequency. Meanwhile, the beat vibration driven by a single relative large excitation or two uniform excitations in both two lateral directions is observed. It is concluded that the nonlinear changing trend of external energy magnitude does not necessary mean a non-constant Q-factor. In particular, the first order natural frequency of the Ag NW is observed to decrease with the increase of temperature. Furthermore, comparing with the predictions by Euler-Bernoulli beam theory, the MD simulation provides a larger and smaller first vibration frequency for the clamped-clamped and clamped-free thin Ag NWs, respectively. Additionally, for thin NWs, the first order natural frequency exhibits a parabolic relationship with the excitation magnitudes. The frequencies of the higher vibration modes tend to be low in comparison to Euler-Bernoulli beam theory predictions. A combined initial excitation is proposed which is capable to drive the NW under a multi-modes vibration and arrows the coexistence of all the following low vibration modes. This work sheds lights on the better understanding of the mechanical properties of NWs, and benefits the increasing utilities of NWs in diverse nano-electronic devices.

cond-mat.mes-hall↗