SearcharxivSearch

arXiv subjects

Yuanyong Fu

Publications and source records attributed to Yuanyong Fu.

4 recordsLinked to original sources

Development and Commissioning of a Compact Cosmic Ray Muon Imaging Prototype

Due to the muon tomography's capability of imaging high Z materials, some potential applications have been reported on inspecting smuggled nuclear materials in customs. A compact Cosmic Ray Muons (CRM) imaging prototype, Lanzhou University Muon Imaging System (LUMIS), is comprehensively introduced in this paper including the structure design, assembly, data acquisition and analysis, detector performance test, and material imaging commissioning etc. Casted triangular prism plastic scintillators (PS) were coupled with Si-PMs for sensitive detector components in system. LUMIS's experimental results show that the detection efficiency of an individual detector layer is about 98%, the position resolution for vertical incident muons is 2.5 mm and the angle resolution is 8.73 mrad given a separation distance of 40.5 cm. Moreover, the image reconstruction software was developed based on the Point of Closest Approach (PoCA) to detect lead bricks as our target. The reconstructed images indicate that the profile of the lead bricks in the image is highly consistent with the target. Subsequently, the capability of LUMIS to distinguish different materials, such as Pb, Cu, Fe, and Al, was investigated as well. The lower limit of response time for rapidly alarming high-Z materials is also given and discussed. The successful development and commissioning of the LUMIS prototype have provided a new solution option in technology and craftsmanship for developing compact CRM imaging systems that can be used in many applications.

physics.ins-det

Beam energy dependence and updated test of the Trojan horse nucleus invariance via the d(d,p)t measurement at ultra-low energies

The $\mathrm{^2H}(d,p)\mathrm{^3H}$ bare nucleus astrophysical S(E) factor has been measured indirectly at energies from about 500 keV down to several keV by means of the Trojan-horse method applied to the quasi-free process $\mathrm{^2H({}^6Li},pt)\mathrm{^4He}$ induced at the lithium beam energy of 11 and 9.5 MeV, which makes the virtual binary process incident energy $\mathrm {E}_{dd}^{qf}$ go much closer to the zero-quasi-free-energy point than that in the previous similar experiment. The obtained results are compared with direct data as well as with previous indirect investigation of the same binary reactions. It shows that the precision of S(E) data in low energy range extracted via the same Trojan horse nucleus ($\mathrm{^6Li}=(d \oplus \alpha)$ ) becomes better when the incident energy decreases from high value down to the zero-quasi-free-energy point. The very good agreement between data extracted from different Trojan horse nucleus ($\mathrm{^6Li}=(d \oplus \alpha)$ vs. $\mathrm{^3He}=(d \oplus p)$) gives a strong updated test for the independence of the binary indirect cross section on the chosen Trojan horse nucleus at low energies.

nucl-ex

New measurement of the d(d,p)t reaction at astrophysical energies via the Trojan-horse method

The study of d(d,p)t reaction is very important for the nucleosynthesis in both standard Big Bang and stellar evolution, as well as for the future fusion reactors planning of energy production. The d(d,p)t bare nucleus astrophysical S(E) factor has been measured indirectly at energies from about 400 keV down to several keV by means of the Trojan horse method applied to the quasi-free process $\rm {}^2H({}^6Li,pt){}^4He$ induced at a lithium beam energy of 9.5 MeV, which is closer to the zero quasi-free energy point. An accurate analysis leads to the determination of the $\rm S_{bare}(0)=56.7 \pm 2.0 keV \cdot b$ and of the corresponding electron screening potential $\rm U_e = 13.2 \pm 4.3 eV$. In addition, this work gives an updated test for the Trojan horse nucleus invariance comparing with previous indirect investigations using $\rm {}^3He=(d+p)$ breakup.

nucl-ex

Experimental spectra analysis in THM with the help of simulation based on Geant4 framework

The Coulomb barrier and electron screening cause difficulties in directly measuring nuclear reaction cross sections of charged particles in astrophysical energies. The Trojan-horse method has been introduced to solve the difficulties as a powerful indirect tool. In order to understand experimental spectra better, Geant4 is employed to simulate the method for the first time. Validity and reliability of the simulation are examined by comparing the experimental data with simulated results. The Geant4 simulation can give useful information to understand the experimental spectra better in data analysis and is beneficial to the design for future related experiments.

nucl-ex