arXiv subjects

Yuanyue Liu

Publications and source records attributed to Yuanyue Liu.

At least 19 recordsLinked to original sources

arXiv2024

Enhancing Carrier Mobility by Remote Phonons

Remote phonons from dielectrics are generally believed to degrade carrier mobility in adjacent semiconductors through Fr\"ohlich scattering of polar-optical phonons (POPs). Here, we show that remote phonons can instead enhance the mobility in van der Waals (vdW) heterostructures. We developed a first-principles computational framework to evaluate these remote phonon effects. Applying our approach to monolayer InSe semiconductor encapsulated by h-BN dielectric layers, we show that electron mobility is enhanced due to coupling between POPs in InSe and h-BN, which gives rise to a new collective phonon mode where the dielectric Fr\"ohlich potential partially cancels that in the semiconductor. Guided by this mechanism, we further identified additional dielectrics that yield similar mobility enhancement. This work offers not only an effective computational method to evaluate the remote phonon effects but also insights into mobility engineering for next-generation electronics.

cond-mat.mtrl-sci↗

arXiv2024

Two-dimensional Semiconductor Computational Carrier Mobility Genome

Two-dimensional (2D) crystalline semiconductors hold promise for next-generation electronic devices due to its atomical thickness and consequent properties. Despite years of search, literature-reported 2D semiconductors commonly suffered from low room-temperature charge mobility (< 200 cm2V-1s-1), due to the dimensionality-increased 'density of scattering', undesirable defects during fabrication and/or strong electron-phonon scattering. Therefore, understanding charge scatterings in 2D semiconductors via computational tools and discovering new 2D semiconductors with high mobility (> 1000 cm2V-1s-1) are both desirable. Here we review the accurate ab initio approaches for electron-phonon/defect/boundary scattering developed these years, and the efforts made in high-mobility 2D semiconductor high throughput screening. Starting from these studies, the common genome of high-mobility 2D semiconductor are summarized and discussed, which would contribute to further discovering of high mobility in 2D semiconductors.

cond-mat.mtrl-sci↗

arXiv2023

Ultra-fast Vacancy Migration: A Novel Approach for Synthesizing Sub-10 nm Crystalline Transition Metal Dichalcogenide Nanocrystals

Two-dimensional materials, such as transition metal dichalcogenides (TMDCs), have the potential to revolutionize the field of electronics and photonics due to their unique physical and structural properties. This research presents a novel method for synthesizing crystalline TMDCs crystals with < 10 nm size using ultra-fast migration of vacancies at elevated temperatures. Through in-situ and ex-situ processing and using atomic-level characterization techniques, we analyze the shape, size, crystallinity, composition, and strain distribution of these nanocrystals. These nanocrystals exhibit electronic structure signatures that differ from the 2D bulk i.e., uniform mono and multilayers. Further, our in-situ, vacuum-based synthesis technique allows observation and comparison of defect and phase evolution in these crystals formed under van der Waals heterostructure confinement versus unconfined conditions. Overall, this research demonstrates a solid-state route to synthesizing uniform nanocrystals of TMDCs and lays the foundation for materials science in confined 2D spaces under extreme conditions.

cond-mat.mtrl-sci↗

arXiv2023

Discovering and Understanding 2D Semiconductors with High Intrinsic Carrier Mobility at Room Temperature

Two-dimensional (2D) semiconductors have demonstrated great potential for next-generation electronics and optoelectronics. However, the current 2D semiconductors suffer from intrinsically low carrier mobility at room temperature, which significantly limits its applications. Here we discover a variety of new 2D semiconductors with mobility one order of magnitude higher than the current ones. The discovery is made by developing effective descriptors for high-throughput computationally screening of the 2D materials database, followed by using state-of-the-art first principles method to accurately calculate the mobility. Further analyses attribute their exceptional mobilities to small effective mass, high sound velocity, high optical phonon frequency, small ratio of Born charge vs. polarizability, and/or weak electron-phonon coupling. Our work opens up new materials to realize high device performance and/or exotic physics that are difficult to achieve previously, and improves the understanding of the carrier transport mechanism.

cond-mat.mtrl-sci↗

arXiv2022

Phonon-limited Mobility of 2D Semiconductors: Quadrupole Scattering and Free-carrier Screening

Two-dimensional (2D) semiconductors have demonstrated great potential for next-generation electronics and optoelectronics. An important property for these applications is the phonon-limited charge carrier mobility. The common approach to calculate the mobility from first principles relies on the interpolation of the electron-phonon coupling (EPC) matrix. However, it neglects the scattering by the dynamical quadrupoles generated by phonons, limiting its accuracy. Here we present a first-principles method to incorporate the quadrupole scattering, which results in a much better interpolation quality and thus a more accurate mobility as exemplified by monolayer MoS2 and InSe. This method also allows for a natural incorporation of the effects of the free carriers, enabling us to efficiently compute the screened EPC and thus the mobility for doped semiconductors. Particularly, we find that the electron mobility of InSe is more sensitive to the carrier concentration than that of MoS2 due to the stronger long-range scattering in intrinsic InSe. With increasing electron concentration, the InSe mobility can reach ~4 times of the intrinsic value, then decrease owing to the involvement of heavier electronic states. Our work provides accurate and efficient methods to calculate the phonon-limited mobility in the intrinsic and doped 2D materials, and improves the fundamental understanding of their transport mechanism.

cond-mat.mtrl-sci↗

arXiv2020

Understanding High-Field Electron Transport Properties of Monolayer Transition Metal Dichalcogenides and Strain Effects

Monolayer transition metal dichalcogenides (MX2) are promising candidates for future electronics. Although the transport properties (e.g. mobility) at low electric field have been widely studied, there are limited studies on high-field properties, which are important for many applications. Particularly, there is lack of understanding of the physical origins underlying the property differences across different MX2. Here by combining first-principles calculations with Monte Carlo simulations, we study the high-field electron transport in defects-free unstrained and tensilely strained MX2 (M=Mo, W and X=S, Se). We find that WS2 has the highest peak velocity (due to its smallest effective mass) that can be reached at the lowest electric field (owing to its highest mobility). Strain can increase the peak velocity by increasing the scattering energy. After reaching the peak velocity, most MX2 demonstrates negative differential mobility (NDM). WS2 shows the largest NDM among unstrained MX2 due to the strongest effect of electron transfer from the low-energy small-mass valley to the high-energy large-mass valley. The tensile strain increases the valley separation, which on one hand suppresses the electron transfer in WS2, on the other hand allows the electrons to access the non-parabolic band region of the low-energy valley. The latter effect leads to an NDM for electrons in the low-energy valley, which can significantly increase the overall NDM at moderate strain. The valley-separation induced NDM in the low-energy valley is found to be a general phenomenon. Our work unveils the physical factors underlying the differences in high-field transport properties of different MX2, and also identifies the most promising candidate as well as effective approach for further improvement.

cond-mat.mtrl-sci↗

arXiv2020

Why Two-Dimensional Semiconductors Generally Have Low Electron Mobility

Atomically thin (two-dimensional, 2D) semiconductors have shown great potential as the fundamental building blocks for next-generation electronics. However, all the 2D semiconductors that have been experimentally made so far have room-temperature electron mobility lower than that of bulk silicon, which is not understood. Here, by using first-principles calculations and reformulating the transport equations to isolate and quantify contributions of different mobility-determining factors, we show that the universally low mobility of 2D semiconductors originates from the high 'density of scatterings,' which is intrinsic to the 2D material with a parabolic electron band. The density of scatterings characterizes the density of phonons that can interact with the electrons and can be fully determined from the electron and phonon band structures without knowledge of electron-phonon coupling strength. Our work reveals the underlying physics limiting the electron mobility of 2D semiconductors and offers a descriptor to quickly assess the mobility.

cond-mat.mtrl-sci↗

arXiv2019

Enhancing Interconnect Reliability and Performance by Converting Tantalum to 2D Layered Tantalum Sulfide at Low Temperature

The interconnect half-pitch size will reach ~20 nm in the coming sub-5 nm technology node. Meanwhile, the TaN/Ta (barrier/liner) bilayer stack has to be > 4 nm to ensure acceptable liner and diffusion barrier properties. Since TaN/Ta occupy a significant portion of the interconnect cross-section and they are much more resistive than Cu, the effective conductance of an ultra-scaled interconnect will be compromised by the thick bilayer. Therefore, two dimensional (2D) layered materials have been explored as diffusion barrier alternatives. However, many of the proposed 2D barriers are prepared at too high temperatures to be compatible with the back-end-of-line (BEOL) technology. In addition, as important as the diffusion barrier properties, the liner properties of 2D materials must be evaluated, which has not yet been pursued. Here, a 2D layered tantalum sulfide (TaSx) with ~1.5 nm thickness is developed to replace the conventional TaN/Ta bilayer. The TaSx ultra-thin film is industry-friendly, BEOL-compatible, and can be directly prepared on dielectrics. Our results show superior barrier/liner properties of TaSx compared to the TaN/Ta bilayer. This single-stack material, serving as both a liner and a barrier, will enable continued scaling of interconnects beyond 5 nm node.

cond-mat.mtrl-sci↗

arXiv2018

Field-effect transistors made from solution-grown two-dimensional tellurene

The reliable production of two-dimensional crystals is essential for the development of new technologies based on 2D materials. However, current synthesis methods suffer from a variety of drawbacks, including limitations in crystal size and stability. Here, we report the fabrication of large-area, high-quality 2D tellurium (tellurene) using a substrate-free solution process. Our approach can create crystals with a process-tunable thickness, from monolayer to tens of nanometres, and with lateral sizes of up to 100 um. The chiral-chain van der Waals structure of tellurene gives rise to strong in-plane anisotropic properties and large thickness dependent shifts in Raman vibrational modes, which is not observed in other 2D layered materials. We also fabricate tellurene field-effect transistors, which exhibit air-stable performance at room temperature for over two months, on off ratios on the order of 106 and field-effect mobilities of around 700 cm2 per Vs. Furthermore, by scaling down the channel length and integrating with high-k dielectrics, transistors with a significant on-state current density of 1 A mm-1 are demonstrated.

cond-mat.mtrl-sci↗

arXiv2016

Self-optimizing layered hydrogen evolution catalyst with high basal-plane activity

Hydrogen is a promising energy carrier and key agent for many industrial chemical processes1. One method for generating hydrogen sustainably is via the hydrogen evolution reaction (HER), in which electrochemical reduction of protons is mediated by an appropriate catalyst-traditionally, an expensive platinum-group metal. Scalable production requires catalyst alternatives that can lower materials or processing costs while retaining the highest possible activity. Strategies have included dilute alloying of Pt2 or employing less expensive transition metal alloys, compounds or heterostructures (e.g., NiMo, metal phosphides, pyrite sulfides, encapsulated metal nanoparticles)3-5. Recently, low-cost, layered transition-metal dichalcogenides (MX2)6 based on molybdenum and tungsten have attracted substantial interest as alternative HER catalysts7-11. These materials have high intrinsic per-site HER activity; however, a significant challenge is the limited density of active sites, which are concentrated at the layer edges.8,10,11. Here we use theory to unravel electronic factors underlying catalytic activity on MX2 surfaces, and leverage the understanding to report group-5 MX2 (H-TaS2 and H-NbS2) electrocatalysts whose performance instead derives from highly active basal-plane sites. Beyond excellent catalytic activity, they are found to exhibit an unusual ability to optimize their morphology for enhanced charge transfer and accessibility of active sites as the HER proceeds. This leads to long cycle life and practical advantages for scalable processing. The resulting performance is comparable to Pt and exceeds all reported MX2 candidates.

cond-mat.mtrl-sci↗

arXiv2016

Two-dimensional Halide Perovskites: Tuning Electronic Activities of Defects

Two-dimensional (2D) halide perovskites are emerging as promising candidates for nano-electronics and optoelectronics. To realize their full potential, it is important to understand the role of those defects that can strongly impact material properties. In contrast to other popular 2D semiconductors (e.g. transition metal dichalcogenides MX2) for which defects typically induce harmful traps, we show that the electronic activities of defects in 2D perovskites are significantly tunable. For example, even with a fixed lattice orientation, one can change the synthesis conditions to convert a line defect (edge or grain boundary) from electron acceptor to inactive site without deep gap states. We show that this difference originates from the enhanced ionic bonding in these perovskites compared with MX2. The donors tend to have high formation energies, and the harmful defects are difficult to form at a low halide chemical potential. Thus we unveil unique properties of defects in 2D perovskites and suggest practical routes to improve them.

cond-mat.mtrl-sci↗

arXiv2016

Origin of low sodium capacity in graphite and generally weak substrate binding of Na and Mg among alkali and alkaline earth metals

It is well known that graphite has a low capacity for Na but a high capacity for other alkali metals. The growing interest in alternative cation batteries beyond Li makes it particularly important to elucidate the origin of this behavior, which is not well understood. In examining this question, we find a quite general phenomenon: among the alkali and alkaline earth metals, Na and Mg generally have the weakest chemical binding to a given substrate, compared with the other elements in the same column of the periodic table. We demonstrate this with quantum mechanics calculations for a wide range of substrate materials (not limited to C) covering a variety of structures and chemical compositions. The phenomenon arises from the competition between trends in the ionization energy and the ion-substrate coupling, down the columns of the periodic table. Consequently, the cathodic voltage for Na and Mg is expected to be lower than those for other metals in the same column. This generality provides a basis for analyzing the binding of alkali and alkaline earth metal atoms over a broad range of systems.

cond-mat.mtrl-sci↗

arXiv2016

Van der Waals metal-semiconductor junction: weak Fermi level pinning enables effective tuning of Schottky barrier

Two-dimensional (2D) semiconductors have shown great promise in (opto)electronic applications. However, their developments are limited by a large Schottky barrier (SB) at the metal-semiconductor junction (MSJ), which is difficult to tune by using conventional metals due to the strong Fermi level pinning (FLP) effect. Here we show that, this problem can be overcome by using 2D metals, which are bounded with 2D semiconductors through van der Waals (vdW) interaction. This success relies on a weak FLP at the vdW MSJ, which is attributed to the suppression of metal-induced gap states. Consequently, the SB becomes tunable and can vanish with proper 2D metals (e.g. H-NbS2). This work not only offers new insights into the fundamental properties of heterojunctions, but also uncovers great potential of 2D metals in device applications.

cond-mat.mes-hall↗

arXiv2015

Air passivation of chalcogen vacancies in two-dimensional semiconductors

Defects play important roles in semiconductors (SCs). Unlike those in bulk SCs, defects in two-dimensional (2D) SCs are exposed to the surrounding environment, which can potentially modify their properties/functions. Air is a common environment; yet its impact on the defects in 2D SCs still remains elusive. In this work, we unravel the interaction between air and chalcogen vacancies (VX)-the most typical defects in 2D SCs. We find that, although the interaction is weak for most molecules in air, O2 can be chemisorbed at VX with a barrier that correlates with the SC cohesive energy and can be overcame even at room temperature for certain SCs. Importantly, the chemisorbed O2 changes the VX from commonly-believed harmful carrier-traps to electronically benign sites. This unusual behavior originates from the iso-valence between O2 and X when bonded with metal. Based on these findings, we propose a facile approach to improve the performance of 2D SCs by using air to passivate the defects.

cond-mat.mtrl-sci↗

arXiv2014

Assessing carbon-based anodes for lithium-ion batteries: A universal description of charge-transfer binding

Many key performance characteristics of carbon-based lithium-ion battery anodes are largely determined by the strength of binding between lithium (Li) and sp2 carbon (C), which can vary significantly with subtle changes in substrate structure, chemistry, and morphology. Here, we use density functional theory calculations to investigate the interactions of Li with a wide variety of sp2 C substrates, including pristine, defective, and strained graphene; planar C clusters; nanotubes; C edges; and multilayer stacks. In almost all cases, we find a universal linear relation between the Li-C binding energy and the work required to fill previously unoccupied electronic states within the substrate. This suggests that Li capacity is predominantly determined by two key factors -- namely, intrinsic quantum capacitance limitations and the absolute placement of the Fermi level. This simple descriptor allows for straightforward prediction of the Li-C binding energy and related battery characteristics in candidate C materials based solely on the substrate electronic structure. It further suggests specific guidelines for designing more effective C-based anodes. The method should be broadly applicable to charge-transfer adsorption on planar substrates, and provides a phenomenological connection to established principles in supercapacitor and catalyst design.

cond-mat.mes-hall↗

arXiv2013

Probing the Synthesis of Two-Dimensional Boron by First-Principles Computations

Boron synthesis, in theory: Although two-dimensional boron sheets have attracted considerable interest because of their theoretically predicted properties, synthesis of such sheets remains a challenge. The feasibility of different synthetic methods for two-dimensional boron sheets was assessed using first-principles calculations, possibly paving the way towards its application in nanoelectronics.

cond-mat.mes-hall↗

arXiv2013

Feasibility of Lithium Storage on Graphene and Its Derivatives

Nanomaterials are anticipated to be promising storage media, owing to their high surface-to-mass ratio. The high hydrogen capacity achieved by using graphene has reinforced this opinion and motivated investigations of the possibility to use it to store another important energy carrier - lithium (Li). While the first-principles computations show that the Li capacity of pristine graphene, limited by Li clustering and phase separation, is lower than that offered by Li intercalation in graphite, we explore the feasibility of modifying graphene for better Li storage. It is found that certain structural defects in graphene can bind Li stably, yet more efficacious approach is through substitution doping with boron (B). In particular, the layered C3B compound stands out as a promising Li storage medium. The monolayer C3B has a capacity of 714 mAh/g (as Li1.25C3B), and the capacity of stacked C3B is 857 mAh/g (as Li1.5C3B), which is about twice as large as graphite's 372 mAh/g (as LiC6). Our results help clarify the mechanism of Li storage in low-dimensional materials, and shed light on the rational design of nano-architectures for energy storage.

cond-mat.mtrl-sci↗

arXiv2012

Dislocations and Grain Boundaries in Two-Dimensional Boron Nitride

A new dislocation structure-square-octagon pair (4|8) is discovered in two-dimensional boron nitride (h-BN), via first-principles calculations. It has lower energy than corresponding pentagon-heptagon pairs (5|7), which contain unfavorable homo-elemental bonds. Based on the structures of dislocations, grain boundaries (GB) in BN are investigated. Depending on the tilt angle of grains, GB can be either polar (B-rich or N-rich), constituted by 5|7s, or un-polar, composed of 4|8s. The polar GBs carry net charges, positive at B-rich and negative at N-rich ones. In contrast to GBs in graphene which generally impede the electronic transport, polar GBs have smaller bandgap compared to perfect BN, which may suggest interesting electronic and optic applications.

cond-mat.mtrl-sci↗