arXiv subjects

Yuchen Sun

Publications and source records attributed to Yuchen Sun.

At least 19 recordsLinked to original sources

arXiv2026

PRISM-Bench: An Audio-Centric Diagnostic Benchmark for Text-to-Audio-Video Generation

Text-to-audio-video (T2AV) generation has advanced rapidly, but its evaluation still underestimates the audio modality. Existing benchmarks either treat audio as an auxiliary component of video quality or assess it in isolation from audiovisual grounding, making it difficult to diagnose where current systems truly succeed or fail in audio generation. We present PRISM-Bench, the first audio-centric diagnostic benchmark for T2AV generation. Built from a rigorously curated dataset of 900 human-verified samples, PRISM-Bench factorizes audio evaluation along two orthogonal axes: audio type (Speech, Music, and Sound) and sound-source visibility (On-screen vs. Off-screen). It evaluates generated content across four perceptual dimensions (Audio-Visual Coherence, Audio Quality, Audio Expressiveness, and Prompt Following) with 35 fine-grained criteria. To ensure reliable assessment, we adopt an enhanced MLLM-as-a-Judge protocol based on blind, side-by-side comparison against ground-truth references, demonstrating strong alignment (over 70% mean agreement) with human raters. Our evaluation of recent T2AV systems highlights a significant performance gap between frontier and open-source models. Furthermore, we demonstrate that current generation paradigms overfit to perceptual fidelity while struggling with complex grounding and control tasks, particularly in generating music and synchronized On-screen audio.

cs.MM↗

arXiv2026

Hamiltonian Two-Way Coupling of Nonlinear Waves and 3D Flows

Simulating large-scale free-surface water by coupling a localized 3D fluid solver to a cheaper 2D surface model has long faced a mismatch in wave dynamics: efficient 2D wave models used in graphics are typically either linear or non-dispersive. These models are fast, simple, and accurate for calm, small-amplitude seas, but coupling them with strongly nonlinear 3D solvers produces visible reflections and artifacts at the 2D--3D interface. We address this problem by introducing a nonlinear and dispersive 2D wave model based on the canonical Zakharov formulation. Its Hamiltonian structure, in which the surface elevation and surface potential form a canonical pair ($\eta$, $\psi$) governed by the wave energy, enables a canonically consistent two-way coupling scheme, allowing information to pass smoothly across the 2D--3D interface. Our 2D solver reduces mean wave-height error by 1.7--5$\times$ over SWE, BEM, and Airy baselines while running more than $10^3\times$ faster than BEM; it achieves greater nonlinear accuracy and coupling fidelity than SWE and Airy, with minor losses in speed and stability. Coupling it with a 3D Navier--Stokes solver yields a full system that suppresses visible seam artifacts across a range of experiments, including dispersion-matching and Kelvin-wake tests, and runs over 4$\times$ faster than a pure GPU NB-FLIP simulation on the same domain.

cs.GR↗

arXiv2026

MIBE: Multi-subject Interaction Benchmark and Evaluator for Personalized Image Generation

Multi-subject personalized image generation requires the precise rendering of all requested reference identities and their specified interactions based on a guiding prompt. However, state-of-the-art models still struggle with this process, frequently omitting subjects, failing to preserve reference appearances, or misattributing interactions. Furthermore, existing metrics designed primarily for single-subject fidelity cannot reliably capture these errors, suffering severe degradation in ranking separability and failing to align with human preference as the subject count increases. To address this gap, we introduce Multi-subject Interaction Benchmark and Evaluator (MIBE), a unified framework comprising a Multi-subject Interaction Benchmark (MIB) and a Multi-subject Interaction Evaluator (MIE). MIB systematically covers diverse relation types and scene complexities through a decoupled data regime. This consists of a 60K-pair VLM-labeled Silver Set for scalable metric training and a 4K-pair double-blind Human Evaluation Gold Set covering a diverse range of state-of-the-art generators, with the Silver Set reaching 95.1% cross-VLM preference agreement. To demonstrate the utility of this benchmark, we present MIE, a lightweight, reference-conditioned evaluator trained exclusively on the Silver Set with a dual-head ranking and diagnosis objective. MIE exhibits strong cross-generator generalization on the Gold Set, achieving 0.922 overall pairwise accuracy against human preference, including 0.982 on seen generators and 0.884 on unseen generators. By outperforming a broad spectrum of baseline metrics, including CLIP and DINO variants, MIE demonstrates that diagnostic supervision can preserve ranking separability and human alignment where traditional evaluators collapse.

cs.CV↗

arXiv2026

Beyond Binary: Reframing GUI Critique as Continuous Semantic Alignment

Test-Time Scaling (TTS), which samples multiple candidate actions and ranks them via a Critic Model, has emerged as a promising paradigm for generalist GUI agents. Its efficacy thus hinges on the critic's fine-grained ranking ability. However, existing GUI critic models uniformly adopt binary classification. Our motivational analysis of these models exposes a severe entanglement: scores for valid actions and plausible-but-invalid distractors become indistinguishable. We attribute this failure to two structural defects: Affordance Collapse--the hierarchical affordance space is compressed into 0/1 labels; and Noise Sensitivity--binary objectives overfit to noisy decision boundaries. To resolve this, we introduce BBCritic (Beyond-Binary Critic), a paradigm shift grounded in the Functional Equivalence Hypothesis. Through two-stage contrastive learning, BBCritic aligns instructions and actions in a shared Affordance Space, recovering the hierarchical structure that binary supervision flattens. We also present BBBench (Beyond-Binary Bench), the first GUI critic benchmark that pairs a dense action space with a hierarchical four-level taxonomy, enabling fine-grained ranking evaluation. Experimental results show that BBCritic-3B, trained without any extra annotation, outperforms 7B-parameter SOTA binary models. It demonstrates strong zero-shot transferability across platforms and tasks, supporting our methodological view: GUI critique is fundamentally a metric-learning problem, not a classification one.

cs.LG↗

arXiv2026

A Few-Step Generative Model on Cumulative Flow Maps

We propose a unified, few-step generative modeling framework based on \emph{cumulative flow maps} for long-range transport in probability space, inspired by flow-map techniques for physical transport and dynamics. At its core is a cumulative-flow abstraction that connects local, instantaneous updates with finite-time transport, enabling generative models to reason about global state transitions. This perspective yields a unified few-step framework built on cumulative transport and \revise{cumulative} parameterization that applies broadly to existing diffusion- and flow-based models without being tied to a specific prediction \revise{instantiation}. Our formulation supports few-step and even one-step generation while preserving synthesis quality, requiring only minimal changes to time embeddings and training objectives, and no increase in model capacity. We demonstrate its effectiveness across diverse tasks, including image generation, geometric distribution modeling, joint prediction, and SDF generation, with reduced inference cost.

cs.LG↗

arXiv2026

AcademiClaw: When Students Set Challenges for AI Agents

Benchmarks within the OpenClaw ecosystem have thus far evaluated exclusively assistant-level tasks, leaving the academic-level capabilities of OpenClaw largely unexamined. We introduce AcademiClaw, a bilingual benchmark of 80 complex, long-horizon tasks sourced directly from university students' real academic workflows -- homework, research projects, competitions, and personal projects -- that they found current AI agents unable to solve effectively. Curated from 230 student-submitted candidates through rigorous expert review, the final task set spans 25+ professional domains, ranging from olympiad-level mathematics and linguistics problems to GPU-intensive reinforcement learning and full-stack system debugging, with 16 tasks requiring CUDA GPU execution. Each task executes in an isolated Docker sandbox and is scored on task completion by multi-dimensional rubrics combining six complementary techniques, with an independent five-category safety audit providing additional behavioral analysis. Experiments on six frontier models show that even the best achieves only a 55\% pass rate. Further analysis uncovers sharp capability boundaries across task domains, divergent behavioral strategies among models, and a disconnect between token consumption and output quality, providing fine-grained diagnostic signals beyond what aggregate metrics reveal. We hope that AcademiClaw and its open-sourced data and code can serve as a useful resource for the OpenClaw community, driving progress toward agents that are more capable and versatile across the full breadth of real-world academic demands. All data and code are available at https://github.com/GAIR-NLP/AcademiClaw.

cs.AI↗

arXiv2026

Matrix-Free Multigrid with Algebraically Consistent Coarsening on Adaptive Octrees

We present a matrix-free GPU multigrid preconditioner with algebraically consistent coarsening for solving Poisson equations on adaptive octree grids with irregular domains. Within uniform-resolution regions, the coarsening satisfies the Galerkin principle. At T-junctions between refinement levels, we propose a flux-consistent coarse-grid correction that restores cross-level consistency while preserving the compact matrix-free representation. The coarse operators are stored in a compact matrix-free form suitable for parallel execution on GPUs. Numerical experiments demonstrate second-order accuracy, grid-independent convergence when used with PCG, and robust performance on cut-cell problems arising in fluid simulation. On a single NVIDIA RTX 4090 GPU, the solver achieves full-solve throughputs above 200 million cells per second on analytical Poisson tests and above 70 million cells per second on pressure projection problems in fluid simulation.

math.NA↗

arXiv2026

LPM 1.0: Video-based Character Performance Model

Performance, the externalization of intent, emotion, and personality through visual, vocal, and temporal behavior, is what makes a character alive. Learning such performance from video is a promising alternative to traditional 3D pipelines. However, existing video models struggle to jointly achieve high expressiveness, real-time inference, and long-horizon identity stability, a tension we call the performance trilemma. Conversation is the most comprehensive performance scenario, as characters simultaneously speak, listen, react, and emote while maintaining identity over time. To address this, we present LPM 1.0 (Large Performance Model), focusing on single-person full-duplex audio-visual conversational performance. Concretely, we build a multimodal human-centric dataset through strict filtering, speaking-listening audio-video pairing, performance understanding, and identity-aware multi-reference extraction; train a 17B-parameter Diffusion Transformer (Base LPM) for highly controllable, identity-consistent performance through multimodal conditioning; and distill it into a causal streaming generator (Online LPM) for low-latency, infinite-length interaction. At inference, given a character image with identity-aware references, LPM 1.0 generates listening videos from user audio and speaking videos from synthesized audio, with text prompts for motion control, all at real-time speed with identity-stable, infinite-length generation. LPM 1.0 thus serves as a visual engine for conversational agents, live streaming characters, and game NPCs. To systematically evaluate this setting, we propose LPM-Bench, the first benchmark for interactive character performance. LPM 1.0 achieves state-of-the-art results across all evaluated dimensions while maintaining real-time inference.

cs.CV↗

arXiv2026

Plato's Form: Toward Backdoor Defense-as-a-Service for LLMs with Prototype Representations

Large language models (LLMs) are increasingly deployed in security-sensitive applications, yet remain vulnerable to backdoor attacks. However, existing backdoor defenses are difficult to operationalize for Backdoor Defense-as-a-Service (BDaaS), as they require unrealistic side information (e.g., downstream clean data, known triggers/targets, or task domain specifics), and lack reusable, scalable purification across diverse backdoored models. In this paper, we present PROTOPURIFY, a backdoor purification framework via parameter edits under minimal assumptions. PROTOPURIFY first builds a backdoor vector pool from clean and backdoored model pairs, aggregates vectors into candidate prototypes, and selects the most aligned candidate for the target model via similarity matching. PROTOPURIFY then identifies a boundary layer through layer-wise prototype alignment and performs targeted purification by suppressing prototype-aligned components in the affected layers, achieving fine-grained mitigation with minimal impact on benign utility. Designed as a BDaaS-ready primitive, PROTOPURIFY supports reusability, customizability, interpretability, and runtime efficiency. Experiments across various LLMs on both classification and generation tasks show that PROTOPURIFY consistently outperforms 6 representative defenses against 6 diverse attacks, including single-trigger, multi-trigger, and triggerless backdoor settings. PROTOPURIFY reduces ASR to below 10%, and even as low as 1.6% in some cases, while incurring less than a 3% drop in clean utility. PROTOPURIFY further demonstrates robustness against adaptive backdoor variants and stability on non-backdoored models.

cs.CR↗

arXiv2026

An Impulse-formed Navier-Stokes Solver based on Long-range Particle Flow Maps

We present a particle-grid characteristic-mapping framework that extends long-range characteristic mapping from inviscid flows to general Navier-Stokes dynamics with viscosity, body forces, and complex boundaries. Unlike traditional grid-based and vorticity-centered characteristic methods, our method is built on the observation that particle trajectories naturally provide the long-range flow map, enabling geometric quantities and their gradients to be transported in a direct and effective manner. We identify the impulse, the gauge variable of the velocity field, as the primary quantity mapped along characteristics while remaining compatible with standard velocity-based incompressible solvers. Using the 1-form representation of the impulse equation, we derive an integral formulation that decomposes the impulse evolution into a component transported geometrically along the particle flow map and a complementary component generated by viscosity and body forces evaluated through path integrals accumulated along particle trajectories. These components together yield a unified characteristic-mapping solver capable of handling incompressible Navier-Stokes flows with viscosity and body forces while maintaining the accuracy and geometric fidelity of characteristic transport.

cs.CE↗

arXiv2026

Trajectory Consistency for One-Step Generation on Euler Mean Flows

We propose \emph{Euler Mean Flows (EMF)}, a flow-based generative framework for one-step and few-step generation that enforces long-range trajectory consistency with minimal sampling cost. The key idea of EMF is to replace the trajectory consistency constraint, which is difficult to supervise and optimize over long time scales, with a principled linear surrogate that enables direct data supervision for long-horizon flow-map compositions. We derive this approximation from the semigroup formulation of flow-based models and show that, under mild regularity assumptions, it faithfully approximates the original consistency objective while being substantially easier to optimize. This formulation leads to a unified, JVP-free training framework that supports both $u$-prediction and $x_1$-prediction variants, avoiding explicit Jacobian computations and significantly reducing memory and computational overhead. Experiments on image synthesis, particle-based geometry generation, and functional generation demonstrate improved optimization stability and sample quality under fixed sampling budgets, together with approximately $50\%$ reductions in training time and memory consumption compared to existing one-step methods for image generation.

cs.LG↗

arXiv2025

Functional Mean Flow in Hilbert Space

We present Functional Mean Flow (FMF) as a one-step generative model defined in infinite-dimensional Hilbert space. FMF extends the one-step Mean Flow framework to functional domains by providing a theoretical formulation for Functional Flow Matching and a practical implementation for efficient training and sampling. We also introduce an $x_1$-prediction variant that improves stability over the original $u$-prediction form. The resulting framework is a practical one-step Flow Matching method applicable to a wide range of functional data generation tasks such as time series, images, PDEs, and 3D geometry.

cs.LG↗

arXiv2025

HOQRI: Higher-order QR Iteration for Low Multilinear Rank Approximation of Large and Sparse Tensors

We propose a new algorithm called higher-order QR iteration (HOQRI) for computing low multilinear rank approximation (LMLRA), also known as the Tucker decomposition, of large and sparse tensors. Compared to the celebrated higher-order orthogonal iterations (HOOI), HOQRI relies on a simple orthogonalization step in each iteration rather than a more sophisticated singular value decomposition step as in HOOI. More importantly, when dealing with extremely large and sparse data tensors, HOQRI completely eliminates the intermediate memory explosion by defining a new sparse tensor operation called TTMcTC (short for tensor times matrix chains times core). Furthermore, recognizing that the orthonormal constraints form a Cartesian product of Stiefel manifolds, we introduce the framework of manifold optimization and show that HOQRI guarantees convergence to the set of stationary points. Numerical experiments on synthetic and real data showcase the effectiveness of HOQRI.

math.NA↗

arXiv2025

Fine-Tuning Vision-Language Models for Visual Navigation Assistance

We address vision-language-driven indoor navigation to assist visually impaired individuals in reaching a target location using images and natural language guidance. Traditional navigation systems are ineffective indoors due to the lack of precise location data. Our approach integrates vision and language models to generate step-by-step navigational instructions, enhancing accessibility and independence. We fine-tune the BLIP-2 model with Low Rank Adaptation (LoRA) on a manually annotated indoor navigation dataset. We propose an evaluation metric that refines the BERT F1 score by emphasizing directional and sequential variables, providing a more comprehensive measure of navigational performance. After applying LoRA, the model significantly improved in generating directional instructions, overcoming limitations in the original BLIP-2 model.

cs.CV↗

arXiv2025

Lethe: Purifying Backdoored Large Language Models with Knowledge Dilution

Large language models (LLMs) have seen significant advancements, achieving superior performance in various Natural Language Processing (NLP) tasks. However, they remain vulnerable to backdoor attacks, where models behave normally for standard queries but generate harmful responses or unintended output when specific triggers are activated. Existing backdoor defenses either lack comprehensiveness, focusing on narrow trigger settings, detection-only mechanisms, and limited domains, or fail to withstand advanced scenarios like model-editing-based, multi-trigger, and triggerless attacks. In this paper, we present LETHE, a novel method to eliminate backdoor behaviors from LLMs through knowledge dilution using both internal and external mechanisms. Internally, LETHE leverages a lightweight dataset to train a clean model, which is then merged with the backdoored model to neutralize malicious behaviors by diluting the backdoor impact within the model's parametric memory. Externally, LETHE incorporates benign and semantically relevant evidence into the prompt to distract LLM's attention from backdoor features. Experimental results on classification and generation domains across 5 widely used LLMs demonstrate that LETHE outperforms 8 state-of-the-art defense baselines against 8 backdoor attacks. LETHE reduces the attack success rate of advanced backdoor attacks by up to 98% while maintaining model utility. Furthermore, LETHE has proven to be cost-efficient and robust against adaptive backdoor attacks.

cs.CL↗

arXiv2025

GLOMIA-Pro: A Generalizable Longitudinal Medical Image Analysis Framework for Disease Progression Prediction

Longitudinal medical images are essential for monitoring disease progression by capturing spatiotemporal changes associated with dynamic biological processes. While current methods have made progress in modeling spatiotemporal patterns, they face three key limitations: (1) lack of generalizable framework applicable to diverse disease progression prediction tasks; (2) frequent overlook of the ordinal nature inherent in disease staging; (3) susceptibility to representation collapse due to structural similarities between adjacent time points, which can obscure subtle but discriminative progression biomarkers. To address these limitations, we propose a Generalizable LOngitudinal Medical Image Analysis framework for disease Progression prediction (GLOMIA-Pro). GLOMIA-Pro consists of two core components: progression representation extraction and progression-aware fusion. The progression representation extraction module introduces a piecewise orthogonal attention mechanism and employs a novel ordinal progression constraint to disentangle finegrained temporal imaging variations relevant to disease progression. The progression-aware fusion module incorporates a redesigned skip connection architecture which integrates the learned progression representation with current imaging representation, effectively mitigating representation collapse during cross-temporal fusion. Validated on two distinct clinical applications: knee osteoarthritis severity prediction and esophageal cancer treatment response assessment, GLOMIA-Pro consistently outperforms seven state-of-the-art longitudinal analysis methods. Ablation studies further confirm the contribution of individual components, demonstrating the robustness and generalizability of GLOMIA-Pro across diverse clinical scenarios.

q-bio.QM↗

arXiv2025

Direct observation of photonic spin Hall effect in Mie scattering

The photonic spin Hall effect (PSHE), a hallmark of spin-orbit interaction of light, has long been considered a promising route toward spin-controlled functionalities in nanophotonics. Yet, its practical realization has been severely limited by the inherently weak spin-orbit coupling in typical systems, resulting in vanishingly small transverse shifts and extremely low scattering efficiency. This fundamental trade-off has rendered the PSHE observable only through complex weak measurement protocols and signal amplification-approaches that come at the cost of further intensity loss, particularly in nanoscale systems. In this work, we overcome this longstanding challenge by introducing a novel mechanism based on symmetry breaking and mode coupling in a standalone scatterer, which unlocks a regime of Friedrich-Wintgen superscattering with strong near-field spin-orbit interaction. This allows for simultaneous enhancement of both the photonic spin Hall shift and the far-field scattering intensity-boosting the latter by nearly two orders of magnitude compared to conventional dipolar particles. Through tailored multipolar interference, the PSHE is made accessible at experimentally convenient angles, enabling post selection-free detection. We report the first direct experimental observation of the PSHE from a single superscattering particle, achieved in the microwave regime via polarization-resolved far-field measurements. Our findings not only validate a new physical pathway for enhancing spin-dependent light-matter interactions, but also establish a robust, scalable platform for spin-based photonic technologies. This breakthrough opens new avenues in precision optical metrology, advanced imaging, LIDAR systems, and integrated photonic circuitry, bridging a critical gap between fundamental spin optics and real-world applications.

physics.optics↗

arXiv2025

Fluid Simulation on Vortex Particle Flow Maps

We propose the Vortex Particle Flow Map (VPFM) method to simulate incompressible flow with complex vortical evolution in the presence of dynamic solid boundaries. The core insight of our approach is that vorticity is an ideal quantity for evolution on particle flow maps, enabling significantly longer flow map distances compared to other fluid quantities like velocity or impulse. To achieve this goal, we developed a hybrid Eulerian-Lagrangian representation that evolves vorticity and flow map quantities on vortex particles, while reconstructing velocity on a background grid. The method integrates three key components: (1) a vorticity-based particle flow map framework, (2) an accurate Hessian evolution scheme on particles, and (3) a solid boundary treatment for no-through and no-slip conditions in VPFM. These components collectively allow a substantially longer flow map length (3-12 times longer) than the state-of-the-art, enhancing vorticity preservation over extended spatiotemporal domains. We validated the performance of VPFM through diverse simulations, demonstrating its effectiveness in capturing complex vortex dynamics and turbulence phenomena.

cs.GR↗