Searcharxiv⌕ Search

arXiv subjects

Yue Chen

Publications and source records attributed to Yue Chen.

At least 199 records · Page 11Linked to original sources
arXiv2023

Dynamic Flow Equilibrium of Transportation and Power Distribution Networks Considering Flexible Traveling Choices and Voltage Quality Improvement

The increasing global spread of electric vehicles (EVs) has introduced significant interdependence between transportation and power networks. Most of the previous studies on coupled networks focus on the formation of equilibrium states between transportation and distribution networks but neglect diminishing the adverse influences of the interaction, especially the voltage quality problems caused by large and fluctuating charging loads. This paper constructs a dynamic interaction model of coupled networks considering both economic and safe operation. First, the dynamic traffic assignment problem is established considering both departure time and route choices, and a dynamic queuing model is designed to describe the EV queuing behaviors at fast charging stations (FCSs). Then, the charging load fluctuation toll is designed as an ancillary toll at FCSs and the bus voltage deviation penalty is considered in optimal power flow to guide the interaction of two networks and tackle the voltage deviation issue. Moreover, the equilibrium state is designed as a fixed-point problem and the solution's existence is proved under mild assumptions. Third, the linearization and convex relaxation techniques are used to improve computational efficiency and a Monte Carlo simulation technique is developed to evaluate the influence of uncertain travel demands on coupled networks. Numerical simulations of coupled networks interaction analyses in deterministic and uncertain conditions are presented.

eess.SY↗
arXiv2023

Distributed Coordination of Charging Stations with Shared Energy Storage in a Distribution Network

Electric vehicle (EV) charging stations have experienced rapid growth, whose impacts on the power grid have become non-negligible. Though charging stations can install energy storage to reduce their impacts on the grid, the conventional "one charging station, one energy storage" method may be uneconomical due to the high upfront cost of energy storage. Shared energy storage can be a potential solution. However, effective management of charging stations with shared energy storage in a distribution network is challenging due to the complex coupling, competing interests, and information asymmetry between different agents. To address the aforementioned challenges, this paper first proposes an equilibrium model to characterize the interaction among charging stations, shared energy storage, and the distribution network. We prove that the equilibrium coincides with the centralized optimization result with trading prices equaling the value of dual variables at optimum. Then, to achieve the efficient equilibrium, a distributed coordination mechanism with a prediction and a correction step is developed to guide the behaviors of different agents with proof of convergence. Numerical experiments and comprehensive performance comparisons are conducted to validate the theoretical results and show the advantages of the proposed mechanism.

eess.SY↗
arXiv2023

Design, Modeling, and Redundancy Resolution of Soft Robot for Effective Harvesting

Blackberry harvesting is a labor-intensive and costly process, consuming up to 50\% of the total annual crop hours. This paper presents a solution for robotic harvesting through the design, manufacturing, integration, and control of a pneumatically actuated, kinematically redundant soft arm with a tendon-driven soft robotic gripper. The hardware design is optimized for durability and modularity for practical use. The harvesting process is divided into four stages: initial placement, fine positioning, grasp, and move back to home position. For initial placement, we propose a real-time, continuous gain-scheduled redundancy resolution algorithm for simultaneous position and orientation control with joint-limit avoidance. The algorithm relies solely on visual feedback from an eye-to-hand camera and achieved a position and orientation tracking error of $0.64\pm{0.27}$ mm and $1.08\pm{1.5}^{\circ}$, respectively, in benchtop settings. Following accurate initial placement of the robotic arm, fine positioning is achieved using a combination of eye-in-hand and eye-to-hand visual feedback, reaching an accuracy of $0.75\pm{0.36}$ mm. The system's hardware, feedback framework, and control methods are thoroughly validated through benchtop and field tests, confirming feasibility for practical applications.

cs.RO↗
arXiv2023

Teleoperation of Soft Modular Robots: Study on Real-time Stability and Gait Control

Soft robotics holds tremendous potential for various applications, especially in unstructured environments such as search and rescue operations. However, the lack of autonomy and teleoperability, limited capabilities, absence of gait diversity and real-time control, and onboard sensors to sense the surroundings are some of the common issues with soft-limbed robots. To overcome these limitations, we propose a spatially symmetric, topologically-stable, soft-limbed tetrahedral robot that can perform multiple locomotion gaits. We introduce a kinematic model, derive locomotion trajectories for different gaits, and design a teleoperation mechanism to enable real-time human-robot collaboration. We use the kinematic model to map teleoperation inputs and ensure smooth transitions between gaits. Additionally, we leverage the passive compliance and natural stability of the robot for toppling and obstacle navigation. Through experimental tests, we demonstrate the robot's ability to tackle various locomotion challenges, adapt to different situations, and navigate obstructed environments via teleoperation.

cs.RO↗
arXiv2023

Approach to Learning Generalized Audio Representation Through Batch Embedding Covariance Regularization and Constant-Q Transforms

General-purpose embedding is highly desirable for few-shot even zero-shot learning in many application scenarios, including audio tasks. In order to understand representations better, we conducted a thorough error analysis and visualization of HEAR 2021 submission results. Inspired by the analysis, this work experiments with different front-end audio preprocessing methods, including Constant-Q Transform (CQT) and Short-time Fourier transform (STFT), and proposes a Batch Embedding Covariance Regularization (BECR) term to uncover a more holistic simulation of the frequency information received by the human auditory system. We tested the models on the suite of HEAR 2021 tasks, which encompass a broad category of tasks. Preliminary results show (1) the proposed BECR can incur a more dispersed embedding on the test set, (2) BECR improves the PaSST model without extra computation complexity, and (3) STFT preprocessing outperforms CQT in all tasks we tested. Github:https://github.com/ankitshah009/general_audio_embedding_hear_2021

cs.SD↗
arXiv2023

Wheelless Soft Robotic Snake Locomotion: Study on Sidewinding and Helical Rolling Gaits

Soft robotic snakes (SRSs) have a unique combination of continuous and compliant properties that allow them to imitate the complex movements of biological snakes. Despite the previous attempts to develop SRSs, many have been limited to planar movements or use wheels to achieve locomotion, which restricts their ability to imitate the full range of biological snake movements. We propose a new design for the SRSs that is wheelless and powered by pneumatics, relying solely on spatial bending to achieve its movements. We derive a kinematic model of the proposed SRS and utilize it to achieve two snake locomotion trajectories, namely sidewinding and helical rolling. These movements are experimentally evaluated under different gait parameters on our SRS prototype. The results demonstrate that the SRS can successfully mimic the proposed spatial locomotion trajectories. This is a significant improvement over the previous designs, which were either limited to planar movements or relied on wheels for locomotion. The ability of the SRS to effectively mimic the complex movements of biological snakes opens up new possibilities for its use in various applications.

cs.RO↗
arXiv2023

Dynamic Modeling and Validation of Soft Robotic Snake Locomotion

Soft robotic snakes made of compliant materials can continuously deform their bodies and, therefore, mimic the biological snakes' flexible and agile locomotion gaits better than their rigid-bodied counterparts. Without wheel support, to date, soft robotic snakes are limited to emulating planar locomotion gaits, which are derived via kinematic modeling and tested on robotic prototypes. Given that the snake locomotion results from the reaction forces due to the distributed contact between their skin and the ground, it is essential to investigate the locomotion gaits through efficient dynamic models capable of accommodating distributed contact forces. We present a complete spatial dynamic model that utilizes a floating-base kinematic model with distributed contact dynamics for a pneumatically powered soft robotic snake. We numerically evaluate the feasibility of the planar and spatial rolling gaits utilizing the proposed model and experimentally validate the corresponding locomotion gait trajectories on a soft robotic snake prototype. We qualitatively and quantitatively compare the numerical and experimental results which confirm the validity of the proposed dynamic model.

cs.RO↗
arXiv2023

UV Volumes for Real-time Rendering of Editable Free-view Human Performance

Neural volume rendering enables photo-realistic renderings of a human performer in free-view, a critical task in immersive VR/AR applications. But the practice is severely limited by high computational costs in the rendering process. To solve this problem, we propose the UV Volumes, a new approach that can render an editable free-view video of a human performer in real-time. It separates the high-frequency (i.e., non-smooth) human appearance from the 3D volume, and encodes them into 2D neural texture stacks (NTS). The smooth UV volumes allow much smaller and shallower neural networks to obtain densities and texture coordinates in 3D while capturing detailed appearance in 2D NTS. For editability, the mapping between the parameterized human model and the smooth texture coordinates allows us a better generalization on novel poses and shapes. Furthermore, the use of NTS enables interesting applications, e.g., retexturing. Extensive experiments on CMU Panoptic, ZJU Mocap, and H36M datasets show that our model can render 960 x 540 images in 30FPS on average with comparable photo-realism to state-of-the-art methods. The project and supplementary materials are available at https://fanegg.github.io/UV-Volumes.

cs.CV↗
arXiv2023

Local-to-Global Registration for Bundle-Adjusting Neural Radiance Fields

Neural Radiance Fields (NeRF) have achieved photorealistic novel views synthesis; however, the requirement of accurate camera poses limits its application. Despite analysis-by-synthesis extensions for jointly learning neural 3D representations and registering camera frames exist, they are susceptible to suboptimal solutions if poorly initialized. We propose L2G-NeRF, a Local-to-Global registration method for bundle-adjusting Neural Radiance Fields: first, a pixel-wise flexible alignment, followed by a frame-wise constrained parametric alignment. Pixel-wise local alignment is learned in an unsupervised way via a deep network which optimizes photometric reconstruction errors. Frame-wise global alignment is performed using differentiable parameter estimation solvers on the pixel-wise correspondences to find a global transformation. Experiments on synthetic and real-world data show that our method outperforms the current state-of-the-art in terms of high-fidelity reconstruction and resolving large camera pose misalignment. Our module is an easy-to-use plugin that can be applied to NeRF variants and other neural field applications. The Code and supplementary materials are available at https://rover-xingyu.github.io/L2G-NeRF/.

cs.CV↗
arXiv2023

Place Recognition under Occlusion and Changing Appearance via Disentangled Representations

Place recognition is a critical and challenging task for mobile robots, aiming to retrieve an image captured at the same place as a query image from a database. Existing methods tend to fail while robots move autonomously under occlusion (e.g., car, bus, truck) and changing appearance (e.g., illumination changes, seasonal variation). Because they encode the image into only one code, entangling place features with appearance and occlusion features. To overcome this limitation, we propose PROCA, an unsupervised approach to decompose the image representation into three codes: a place code used as a descriptor to retrieve images, an appearance code that captures appearance properties, and an occlusion code that encodes occlusion content. Extensive experiments show that our model outperforms the state-of-the-art methods. Our code and data are available at https://github.com/rover-xingyu/PROCA.

cs.CV↗
arXiv2023

Automatic Sleep Stage Classification with Cross-modal Self-supervised Features from Deep Brain Signals

The detection of human sleep stages is widely used in the diagnosis and intervention of neurological and psychiatric diseases. Some patients with deep brain stimulator implanted could have their neural activities recorded from the deep brain. Sleep stage classification based on deep brain recording has great potential to provide more precise treatment for patients. The accuracy and generalizability of existing sleep stage classifiers based on local field potentials are still limited. We proposed an applicable cross-modal transfer learning method for sleep stage classification with implanted devices. This end-to-end deep learning model contained cross-modal self-supervised feature representation, self-attention, and classification framework. We tested the model with deep brain recording data from 12 patients with Parkinson's disease. The best total accuracy reached 83.2% for sleep stage classification. Results showed speech self-supervised features catch the conversion pattern of sleep stages effectively. We provide a new method on transfer learning from acoustic signals to local field potentials. This method supports an effective solution for the insufficient scale of clinical data. This sleep stage classification model could be adapted to chronic and continuous monitor sleep for Parkinson's patients in daily life, and potentially utilized for more precise treatment in deep brain-machine interfaces, such as closed-loop deep brain stimulation.

cs.LG↗
arXiv2023

Tendon-Driven Soft Robotic Gripper with Integrated Ripeness Sensing for Blackberry Harvesting

Growing global demand for food, coupled with continuing labor shortages, motivates the need for automated agricultural harvesting. While some specialty crops (e.g., apples, peaches, blueberries) can be harvested via existing harvesting modalities, fruits such as blackberries and raspberries require delicate handling to mitigate fruit damage that could significantly impact marketability. This motivates the development of soft robotic solutions that enable efficient, delicate harvesting. This paper presents the design, fabrication, and feasibility testing of a tendon-driven soft gripping system focused on blackberries, which are a fragile fruit susceptible to post-harvest damage. The gripper is both low-cost and small form factor, allowing for the integration of a micro-servo for tendon retraction, a near-infrared (NIR) based blackberry ripeness sensor utilizing the reflectance modality for identifying fully ripe blackberries, and an endoscopic camera for visual servoing with a UR-5. The gripper was used to harvest 139 berries with manual positioning in two separate field tests. Field testing found an average retention force of 2.06 N and 6.08 N for ripe and unripe blackberries, respectively. Sensor tests identified an average reflectance of 16.78 and 21.70 for ripe and unripe blackberries, respectively, indicating a clear distinction between the two ripeness levels. Finally, the soft robotic gripper was integrated onto a UR5 robot arm and successfully harvested fifteen artificial blackberries in a lab setting using visual servoing.

cs.RO↗
arXiv2022

Computational Associative Memory with Amorphous InGaZnO Channel 3D NAND-Compatible FG Transistors

3D NAND enables continuous NAND density and cost scaling beyond conventional 2D NAND. However, its poly-Si channel suffers from low mobility, large device variations, and instability caused by grain boundaries. Here, we overcome these drawbacks by introducing an amorphous indium-gallium-zinc-oxide (a-IGZO) channel, which has the advantages of ultra-low OFF current, back-end-of-line compatibility, higher mobility and better uniformity than poly-Si, and free of grain boundaries due to the amorphous nature. Ultra-scaled floating-gate (FG) transistors with a channel length of 60 nm are reported, achieving the highest ON current of 127 uA/um among all reported a-IGZO-based flash devices for high-density, low-power, and high-performance 3D NAND applications. Furthermore, a non-volatile and area-efficient ternary content-addressable memory (TCAM) with only two a-IGZO FG transistors is experimentally demonstrated. Array-level simulations using experimentally calibrated models show that this design achieves at least 240x array-size scalability and 2.7-fold reduction in search energy than 16T-CMOS, 2T2R, and 2FeFET TCAMs.

cond-mat.mes-hall↗
arXiv2022

Giant magnetic in-plane anisotropy and competing instabilities in Na3Co2SbO6

We report magnetometry data obtained on twin-free single crystals of Na3Co2SbO6, which is considered a candidate material for realizing the Kitaev honeycomb model for quantum spin liquids. Contrary to a common belief that such materials can be modeled with the symmetries of an ideal honeycomb lattice, our data reveal a pronounced two-fold symmetry and in-plane anisotropy of over 200%, despite the honeycomb layer's tiny orthorhombic distortion of less than 0.2%. We further use magnetic neutron diffraction to elucidate a rich variety of field-induced phases observed in the magnetometry. These phases manifest themselves in the paramagnetic state as diffuse scattering signals associated with competing ferro- and antiferromagnetic instabilities, consistent with a theory that also predicts a quantum spin liquid phase nearby. Our results call for theoretical understanding of the observed in-plane anisotropy, and render Na3Co2SbO6 a promising ground for finding exotic quantum phases by targeted external tuning.

cond-mat.str-el↗
arXiv2022

Dynamic Control of Soft Robotic Arm: An Experimental Study

In this paper, a reinforced soft robot prototype with a custom-designed actuator-space string encoder are created to investigate dynamic soft robotic trajectory tracking. The soft robot prototype embedded with the proposed adaptive passivity control and efficient dynamic model make the challenging trajectory tracking tasks possible. We focus on the exploration of tracking accuracy as well as the full potential of the proposed control strategy by performing experimental validations at different operation scenarios: various tracking speed and external disturbance. In all experimental scenarios, the proposed adaptive passivity control outperforms the conventional PD feedback linearization control. The experimental analysis details the advantage and shortcoming of the proposed approach, and points out the next steps for future soft robot dynamic control.

cs.RO↗
arXiv2022

A Novel Non-Volatile Inverter-based CiM: Continuous Sign Weight Transition and Low Power on-Chip Training

In this work, we report a novel design, one-transistor-one-inverter (1T1I), to satisfy high speed and low power on-chip training requirements. By leveraging doped HfO2 with ferroelectricity, a non-volatile inverter is successfully demonstrated, enabling desired continuous weight transition between negative and positive via the programmable threshold voltage (VTH) of ferroelectric field-effect transistors (FeFETs). Compared with commonly used designs with the similar function, 1T1I uniquely achieves pure on-chip-based weight transition at an optimized working current without relying on assistance from off-chip calculation units for signed-weight comparison, facilitating high-speed training at low power consumption. Further improvements in linearity and training speed can be obtained via a two-transistor-one-inverter (2T1I) design. Overall, focusing on energy and time efficiencies, this work provides a valuable design strategy for future FeFET-based computing-in-memory (CiM).

cond-mat.mes-hall↗
arXiv2022

Landmark Tracking in Liver US images Using Cascade Convolutional Neural Networks with Long Short-Term Memory

This study proposed a deep learning-based tracking method for ultrasound (US) image-guided radiation therapy. The proposed cascade deep learning model is composed of an attention network, a mask region-based convolutional neural network (mask R-CNN), and a long short-term memory (LSTM) network. The attention network learns a mapping from a US image to a suspected area of landmark motion in order to reduce the search region. The mask R-CNN then produces multiple region-of-interest (ROI) proposals in the reduced region and identifies the proposed landmark via three network heads: bounding box regression, proposal classification, and landmark segmentation. The LSTM network models the temporal relationship among the successive image frames for bounding box regression and proposal classification. To consolidate the final proposal, a selection method is designed according to the similarities between sequential frames. The proposed method was tested on the liver US tracking datasets used in the Medical Image Computing and Computer Assisted Interventions (MICCAI) 2015 challenges, where the landmarks were annotated by three experienced observers to obtain their mean positions. Five-fold cross-validation on the 24 given US sequences with ground truths shows that the mean tracking error for all landmarks is 0.65+/-0.56 mm, and the errors of all landmarks are within 2 mm. We further tested the proposed model on 69 landmarks from the testing dataset that has a similar image pattern to the training pattern, resulting in a mean tracking error of 0.94+/-0.83 mm. Our experimental results have demonstrated the feasibility and accuracy of our proposed method in tracking liver anatomic landmarks using US images, providing a potential solution for real-time liver tracking for active motion management during radiation therapy.

cs.CV↗
arXiv2022

Optimal Network Charge for Peer-to-Peer Energy Trading: A Grid Perspective

Peer-to-peer (P2P) energy trading is a promising market scheme to accommodate the increasing distributed energy resources (DERs). However, how P2P to be integrated into the existing power systems remains to be investigated. In this paper, we apply network charge as a means for the grid operator to attribute transmission loss and ensure network constraints for empowering P2P transaction. The interaction between the grid operator and the prosumers is modeled as a Stackelberg game, which yields a bi-level optimization problem. We prove that the Stackelberg game admits an equilibrium network charge price. Besides, we propose a method to obtain the network charge price by converting the bi-level optimization into a single-level mixed-integer quadratic programming (MIQP), which can handle a reasonable scale of prosumers efficiently. Simulations on the IEEE bus systems show that the proposed optimal network charge is favorable as it can benefit both the grid operator and the prosumers for empowering the P2P market, and achieves near-optimal social welfare. Moreover, the results show that the presence of energy storage will make the prosumers more sensitive to the network charge price changes.

cs.CE↗