arXiv subjects

Yugang Zhao

Publications and source records attributed to Yugang Zhao.

4 recordsLinked to original sources

arXiv2026

A melting mode of frozen sessile droplets with unmelted ice layer deposited at the bottom

Water-repellent properties of superhydrophobic surfaces make them promising for anti-icing and deicing applications. Through experimental visualization of frozen sessile droplets undergoing melting on superhydrophobic surfaces, we identify a melting mode with the unmelted ice layer deposited at the bottom of the melting droplet, even though the density of ice is lower than that of water. In the deposited mode of the melting process, the time required for the frozen droplet to melt completely is much shorter than that in the floating mode. Force analysis shows that the melted fluid flows along the gas-liquid interface toward the top of the melting droplet, thereby exerting force and then suppressing the upward movement of the unmelted ice layer. Moreover, the flow within the liquid film formed between the unmelted ice layer and the heating wall is dominated by the viscous force, which has a lubrication effect and maintains the deposition of the unmelted ice layer. High heating temperature, large contact angle, and low particle concentration are helpful for the occurrence of the deposited mode.

physics.flu-dyn↗

arXiv2024

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

The design, construction, and commissioning of a conduction-cooled Nb3Sn demonstration superconducting radio frequency (SRF) electron accelerator at the Institute of Modern Physics of the Chinese Academy of Sciences (IMP, CAS) will be presented. In the context of engineering application planning for Nb3Sn thin-film SRF cavities within the CiADS project, a 650MHz 5-cell elliptical cavity was coated using the vapor diffusion method for electron beam acceleration. Through high-precision collaborative control of 10 GM cryocooler, slow cooldown of the cavity crossing 18K is achieved accompanied by obviously characteristic magnetic flux expulsion. The horizontal test results of the liquid helium-free (LHe-free) cryomodule show that the cavity can operate steadily at Epk=6.02MV/m in continuous wave (CW) mode, and at Epk=14.90MV/m in 40% duty cycle pulse mode. The beam acceleration experiment indicates that the maximum average current of the electron beam in the macropulse after acceleration exceeds 200mA, with a maximum energy gain of 4.6MeV. The results provide a principle validation for the engineering application of Nb3Sn thin-film SRF cavities, highlighting the promising industrial application prospects of a small-scale compact Nb3Sn SRF accelerator driven by commercial cryocoolers.

physics.acc-ph↗

arXiv2018

Triple condensate halo from water droplets impacting on cold surfaces

Understanding the dynamics in the deposition of water droplets onto solid surfaces is of importance from both fundamental and practical viewpoints. While the deposition of a water droplet onto a heated surface is extensively studied, the characteristics of depositing a droplet onto a cold surface and the phenomena leading to such behavior remain elusive. Here we report the formation of a triple condensate halo observed during the deposition of a water droplet onto a cold surface, due to the interplay between droplet impact dynamics and vapor diffusion. Two subsequent condensation stages occur during the droplet spreading and cooling processes, engendering this unique condensate halo with three distinctive bands. We further proposed a scaling model to interpret the size of each band, and the model is validated by the experiments of droplets with different impact velocity and varying substrate temperature. Our experimental and theoretical investigation of the droplet impact dynamics and the associated condensation unravels the mass and heat transfer among droplet, vapor and substrate, offer a new sight for designing of heat exchange devices.

physics.flu-dyn↗

arXiv2017

Unique shape changes during freezing of a nanofluid droplet

Understanding the dynamics during freezing of nanofluid droplets is of importance from a fundamental and practical viewpoint. While the freezing of a water droplet has been extensively studied, little information is available about the characteristics of freezing a nanofluid droplet. Here, we report unique shape changes observed during the freezing process of a nanofluid droplet. Instead of forming a pointy tip on the frozen deionized water droplet, we found that the top of a frozen nanofluid droplet exhibits a flat plateau shape and such plateau becomes larger with increasing nanoparticle concentration. We ascribe this characteristic shape change to an outward Marangoni flow which moves liquid from the droplet interior to its vertexes, thus engendering the volume redistribution and shape changes. Moreover, we also observed a particle ring pattern formed during freezing of a nanofluid droplet, which is similar to the well-known coffee stain phenomenon occurring during evaporation of a water droplet with dispersed particles. We believe our reported phenomena are not only of fundamental interest but have potential applications in the freezing of nanofluids for energy storage and developing nanofluid based new microfabrication methods.

physics.flu-dyn↗