SearcharxivSearch

arXiv subjects

Yuhong Huang

Publications and source records attributed to Yuhong Huang.

10 recordsLinked to original sources

A Wireless World Model for AI-Native 6G Networks

Integrating AI into the physical layer is a cornerstone of 6G networks. However, current data-driven approaches struggle to generalize across dynamic environments because they lack an intrinsic understanding of electromagnetic wave propagation. We introduce the Wireless World Model (WWM), a multi-modal foundation framework predicting the spatiotemporal evolution of wireless channels by internalizing the causal relationship between 3D geometry and signal dynamics. Pre-trained on a massive ray-traced multi-modal dataset, WWM overcomes the data authenticity gap, further validated under real-world measurement data. Using a joint-embedding predictive architecture with a multi-modal mixture-of-experts Transformer, WWM fuses channel state information, 3D point clouds, and user trajectories into a unified representation. Across the five key downstream tasks supported by WWM, it achieves remarkable performance in seen environments, unseen generalization scenarios, and real-world measurements, consistently outperforming SOTA uni-modal foundation models and task-specific models. This paves the way for physics-aware 6G intelligence that adapts to the physical world.

cs.NI

Towards AI-Native RAN: An Operator's Perspective of 6G Day 1 Standardization

Artificial Intelligence/Machine Learning (AI/ML) has become the most certain and prominent feature of 6G mobile networks. Unlike 5G, where AI/ML was not natively integrated but rather an add-on feature over existing architecture, 6G shall incorporate AI from the onset to address its complexity and support ubiquitous AI applications. Based on our extensive mobile network operation and standardization experience from 2G to 5G, this paper explores the design and standardization principles of AI-Native radio access networks (RAN) for 6G, with a particular focus on its critical Day 1 architecture, functionalities and capabilities. We investigate the framework of AI-Native RAN and present its three essential capabilities to shed some light on the standardization direction; namely, AI-driven RAN processing/optimization/automation, reliable AI lifecycle management (LCM), and AI-as-a-Service (AIaaS) provisioning. The standardization of AI-Native RAN, in particular the Day 1 features, including an AI-Native 6G RAN architecture, were proposed. For validation, a large-scale field trial with over 5000 5G-A base stations have been built and delivered significant improvements in average air interface latency, root cause identification, and network energy consumption with the proposed architecture and the supporting AI functions. This paper aims to provide a Day 1 framework for 6G AI-Native RAN standardization design, balancing technical innovation with practical deployment.

cs.NI

Reconfigurable Intelligent Surface (RIS) System Level Simulations for Industry Standards

Reconfigurable intelligent surface (RIS) is an emerging technology for wireless communications. In this paper, extensive system level simulations are conducted for analyzing the performance of multi-RIS and multi-base-station (BS) scenarios, by considering typical settings for industry standards. Pathloss and large-scale fading are taken into account when modeling the RIS cascaded and direct links. The performance metrics considered are the downlink reference signal received power (RSRP) and the signal to interference noise ratio (SINR). The evaluation methodology is compatible with that utilized for technology studies in industry standards development organizations, by considering the uniqueness of RIS. The simulations are comprehensive, and they take into account different layouts of RIS panels and mobiles in a cell, and different densities and sizes of RIS panels. Several practical aspects are considered, including the interference between RIS panels, the phase quantization of RIS elements, and the failure of RIS elements. The impact of near field effects for the RIS-mobile links is analyzed as well. Simulation results demonstrate the potential of RIS-aided deployments in improving the system capacity and cell coverage in 6G mobile systems.

cs.IT

Gassidy: Gaussian Splatting SLAM in Dynamic Environments

3D Gaussian Splatting (3DGS) allows flexible adjustments to scene representation, enabling continuous optimization of scene quality during dense visual simultaneous localization and mapping (SLAM) in static environments. However, 3DGS faces challenges in handling environmental disturbances from dynamic objects with irregular movement, leading to degradation in both camera tracking accuracy and map reconstruction quality. To address this challenge, we develop an RGB-D dense SLAM which is called Gaussian Splatting SLAM in Dynamic Environments (Gassidy). This approach calculates Gaussians to generate rendering loss flows for each environmental component based on a designed photometric-geometric loss function. To distinguish and filter environmental disturbances, we iteratively analyze rendering loss flows to detect features characterized by changes in loss values between dynamic objects and static components. This process ensures a clean environment for accurate scene reconstruction. Compared to state-of-the-art SLAM methods, experimental results on open datasets show that Gassidy improves camera tracking precision by up to 97.9% and enhances map quality by up to 6%.

cs.RO

Unsourced Sparse Multiple Access foUnsourced Sparse Multiple Access for 6G Massive Communicationr 6G Massive Communication

Massive communication is one of key scenarios of 6G where two magnitude higher connection density would be required to serve diverse services. As a promising direction, unsourced multiple access has been proved to outperform significantly over orthogonal multiple access (OMA) or slotted-ALOHA in massive connections. In this paper we describe a design framework of unsourced sparse multiple access (USMA) that consists of two key modules: compressed sensing for preamble generation, and sparse interleaver division multiple access (SIDMA) for main packet transmission. Simulation results of general design of USMA show that the theoretical bound can be approached within 1~1.5 dB by using simple channel codes like convolutional. To illustrate the scalability of USMA, a customized design for ambient Internet of Things (A-IoT) is proposed, so that much less memory and computation are required. Simulations results of Rayleigh fading and realistic channel estimation show that USMA based A-IoT solution can deliver nearly 4 times capacity and 6 times efficiency for random access over traditional radio frequency identification (RFID) technology.

cs.IT

Locomotion Generation for a Rat Robot based on Environmental Changes via Reinforcement Learning

This research focuses on developing reinforcement learning approaches for the locomotion generation of small-size quadruped robots. The rat robot NeRmo is employed as the experimental platform. Due to the constrained volume, small-size quadruped robots typically possess fewer and weaker sensors, resulting in difficulty in accurately perceiving and responding to environmental changes. In this context, insufficient and imprecise feedback data from sensors makes it difficult to generate adaptive locomotion based on reinforcement learning. To overcome these challenges, this paper proposes a novel reinforcement learning approach that focuses on extracting effective perceptual information to enhance the environmental adaptability of small-size quadruped robots. According to the frequency of a robot's gait stride, key information of sensor data is analyzed utilizing sinusoidal functions derived from Fourier transform results. Additionally, a multifunctional reward mechanism is proposed to generate adaptive locomotion in different tasks. Extensive simulations are conducted to assess the effectiveness of the proposed reinforcement learning approach in generating rat robot locomotion in various environments. The experiment results illustrate the capability of the proposed approach to maintain stable locomotion of a rat robot across different terrains, including ramps, stairs, and spiral stairs.

cs.RO

Optimizing Dynamic Balance in a Rat Robot via the Lateral Flexion of a Soft Actuated Spine

Balancing oneself using the spine is a physiological alignment of the body posture in the most efficient manner by the muscular forces for mammals. For this reason, we can see many disabled quadruped animals can still stand or walk even with three limbs. This paper investigates the optimization of dynamic balance during trot gait based on the spatial relationship between the center of mass (CoM) and support area influenced by spinal flexion. During trotting, the robot balance is significantly influenced by the distance of the CoM to the support area formed by diagonal footholds. In this context, lateral spinal flexion, which is able to modify the position of footholds, holds promise for optimizing balance during trotting. This paper explores this phenomenon using a rat robot equipped with a soft actuated spine. Based on the lateral flexion of the spine, we establish a kinematic model to quantify the impact of spinal flexion on robot balance during trot gait. Subsequently, we develop an optimized controller for spinal flexion, designed to enhance balance without altering the leg locomotion. The effectiveness of our proposed controller is evaluated through extensive simulations and physical experiments conducted on a rat robot. Compared to both a non-spine based trot gait controller and a trot gait controller with lateral spinal flexion, our proposed optimized controller effectively improves the dynamic balance of the robot and retains the desired locomotion during trotting.

cs.RO

Quantum Computing for MIMO Beam Selection Problem: Model and Optical Experimental Solution

Massive multiple-input multiple-output (MIMO) has gained widespread popularity in recent years due to its ability to increase data rates, improve signal quality, and provide better coverage in challenging environments. In this paper, we investigate the MIMO beam selection (MBS) problem, which is proven to be NP-hard and computationally intractable. To deal with this problem, quantum computing that can provide faster and more efficient solutions to large-scale combinatorial optimization is considered. MBS is formulated in a quadratic unbounded binary optimization form and solved with Coherent Ising Machine (CIM) physical machine. We compare the performance of our solution with two classic heuristics, simulated annealing and Tabu search. The results demonstrate an average performance improvement by a factor of 261.23 and 20.6, respectively, which shows that CIM-based solution performs significantly better in terms of selecting the optimal subset of beams. This work shows great promise for practical 5G operation and promotes the application of quantum computing in solving computationally hard problems in communication.

cs.NI

A Biologically-Inspired Simultaneous Localization and Mapping System Based on LiDAR Sensor

Simultaneous localization and mapping (SLAM) is one of the essential techniques and functionalities used by robots to perform autonomous navigation tasks. Inspired by the rodent hippocampus, this paper presents a biologically inspired SLAM system based on a LiDAR sensor using a hippocampal model to build a cognitive map and estimate the robot pose in indoor environments. Based on the biologically inspired models mimicking boundary cells, place cells, and head direction cells, the SLAM system using LiDAR point cloud data is capable of leveraging the self-motion cues from the LiDAR odometry and the boundary cues from the LiDAR boundary cells to build a cognitive map and estimate the robot pose. Experiment results show that with the LiDAR boundary cells the proposed SLAM system greatly outperforms the camera-based brain-inspired method in both simulation and indoor environments, and is competitive with the conventional LiDAR-based SLAM methods.

cs.RO

Autonomous Driving Simulator based on Neurorobotics Platform

There are many artificial intelligence algorithms for autonomous driving, but directly installing these algorithms on vehicles is unrealistic and expensive. At the same time, many of these algorithms need an environment to train and optimize. Simulation is a valuable and meaningful solution with training and testing functions, and it can say that simulation is a critical link in the autonomous driving world. There are also many different applications or systems of simulation from companies or academies such as SVL and Carla. These simulators flaunt that they have the closest real-world simulation, but their environment objects, such as pedestrians and other vehicles around the agent-vehicle, are already fixed programmed. They can only move along the pre-setting trajectory, or random numbers determine their movements. What is the situation when all environmental objects are also installed by Artificial Intelligence, or their behaviors are like real people or natural reactions of other drivers? This problem is a blind spot for most of the simulation applications, or these applications cannot be easy to solve this problem. The Neurorobotics Platform from the TUM team of Prof. Alois Knoll has the idea about "Engines" and "Transceiver Functions" to solve the multi-agents problem. This report will start with a little research on the Neurorobotics Platform and analyze the potential and possibility of developing a new simulator to achieve the true real-world simulation goal. Then based on the NRP-Core Platform, this initial development aims to construct an initial demo experiment. The consist of this report starts with the basic knowledge of NRP-Core and its installation, then focus on the explanation of the necessary components for a simulation experiment, at last, about the details of constructions for the autonomous driving system, which is integrated object detection and autonomous control.

cs.RO