Searcharxiv⌕ Search

arXiv subjects

Yuki Asano

Publications and source records attributed to Yuki Asano.

At least 19 recordsLinked to original sources

Scaling laws in machine learning on non-ideal experimental data enable inverse design of radiative-cooling coatings

Materials informatics increasingly targets multicomponent materials, yet experimental datasets inevitably contain non-ideal variations arising from imperfect uniformity and reproducibility in composition, coating formation, and measurement. Whether machine-learning prediction accuracy scales with amount of data under these conditions remains unclear. Here, we develop an automated platform that produced and optically characterized 11,520 radiative-cooling coatings spanning nine material and processing parameters. Forward and inverse neural networks, and a spectrum-conditioned diffusion model were trained on subsets of 10 to 10,000 samples. All models exhibited power-law scaling, with prediction errors decreasing with dataset size. Experimental inverse-design validation showed that larger datasets produced spectra closer to a broadband-emitter target. The diffusion model generated multiple candidate parameter sets, allowing selection among alternative solutions based on ease of fabrication, cost, and scalability. These results demonstrate predictable learning-curve scaling in non-ideal experimental data and provide a quantitative basis for estimating the benefit of additional experimental data, and thus the cost-effectiveness of materials-informatics.

cond-mat.mtrl-sci↗

Balancing Representations by Identifying and Generating Under-represented Data

Self-supervised learning inherits the coverage of its source data. When an unlabeled corpus is long-tailed, the representation becomes dense around frequent modes and thin where coverage is weak. Objectives for long-tailed SSL reweight the images already in the corpus and add no new ones. We introduce BRIDGE (Balancing Representations by Identifying and Generating Under-represented Data), a label-free feedback loop around the source set. The current encoder scores every source image by its mean kNN distance, and a budgeted acquisition rule selects images from a band of that score distribution where support is thin and the generator still produces faithful variants. A frozen image-to-image diffusion model then adds local variants of the selected anchors, and pretraining continues on the enlarged source set. We formulate acquisition as recoverability-weighted allocation of local support and derive when a finite budget should favor a sparse band that excludes the extreme tail and when reallocation after each repair is optimal under a fixed objective. Across five long-tailed, web-scraped and synthetic source regimes, BRIDGE has the highest seven-task linear-probe and kNN average of the compared methods, and paired experiments extend the gain to ViT-S under contrastive and self-distillation objectives, to low-label fine-tuning and to semantic segmentation. The linear-probe gain is smaller under masked reconstruction. Generated repair matches an oracle that restores the withheld real images, and under a frozen encoder the inserted images shrink the neighborhoods of the selected anchors about twice as much as those of matched unselected images. BRIDGE needs no labels and leaves the pretraining objective unchanged, so it can be added to pretraining on uncurated web data, where the encoder decides which images to generate.

cs.CV↗

Auto-Vocabulary Semantic Segmentation

Open-Vocabulary Segmentation (OVS) methods are capable of performing semantic segmentation without relying on a fixed vocabulary, and in some cases, without training or fine-tuning. However, OVS methods typically require a human in the loop to specify the vocabulary based on the task or dataset at hand. In this paper, we introduce Auto-Vocabulary Semantic Segmentation (AVS), advancing open-ended image understanding by eliminating the necessity to predefine object categories for segmentation. Our approach, AutoSeg, presents a framework that autonomously identifies relevant class names using semantically enhanced BLIP embeddings and segments them afterwards. Given that open-ended object category predictions cannot be directly compared with a fixed ground truth, we develop a Large Language Model-based Auto-Vocabulary Evaluator (LAVE) to efficiently evaluate the automatically generated classes and their corresponding segments. With AVS, our method sets new benchmarks on datasets PASCAL VOC, Context, ADE20K, and Cityscapes, while showing competitive performance to OVS methods that require specified class names.

cs.CV↗

Reflex-based Motion Strategy of Musculoskeletal Humanoids under Environmental Contact Using Muscle Relaxation Control

The musculoskeletal humanoid can move well under environmental contact thanks to its body softness. However, there are few studies that actively make use of the environment to rest its flexible musculoskeletal body. Also, its complex musculoskeletal structure is difficult to modelize and high internal muscle tension sometimes occurs. To solve these problems, we develop a muscle relaxation control which can minimize the muscle tension by actively using the environment and inhibit useless internal muscle tension. We apply this control to some basic movements, the motion of resting the arms on the desk, and handle operation, and verify its effectiveness.

cs.RO↗

Online Learning of Danger Avoidance for Complex Structures of Musculoskeletal Humanoids and Its Applications

The complex structure of musculoskeletal humanoids makes it difficult to model them, and the inter-body interference and high internal muscle force are unavoidable. Although various safety mechanisms have been developed to solve this problem, it is important not only to deal with the dangers when they occur but also to prevent them from happening. In this study, we propose a method to learn a network outputting danger probability corresponding to the muscle length online so that the robot can gradually prevent dangers from occurring. Applications of this network for control are also described. The method is applied to the musculoskeletal humanoid, Musashi, and its effectiveness is verified.

cs.RO↗

Stability Recognition with Active Vibration for Bracing Behaviors and Motion Extensions Using Environment in Musculoskeletal Humanoids

Although robots with flexible bodies are superior in terms of the contact and adaptability, it is difficult to control them precisely. On the other hand, human beings make use of the surrounding environments to stabilize their bodies and control their movements. In this study, we propose a method for the bracing motion and extension of the range of motion using the environment for the musculoskeletal humanoid. Here, it is necessary to recognize the stability of the body when contacting the environment, and we develop a method to measure it by using the change in sensor values of the body when actively vibrating a part of the body. Experiments are conducted using the musculoskeletal humanoid Musashi, and the effectiveness of this method is confirmed.

cs.RO↗

Applications of Stretch Reflex for the Upper Limb of Musculoskeletal Humanoids: Protective Behavior, Postural Stability, and Active Induction

The musculoskeletal humanoid has various biomimetic benefits, and it is important that we can embed and evaluate human reflexes in the actual robot. Although stretch reflex has been implemented in lower limbs of musculoskeletal humanoids, we apply it to the upper limb to discover its useful applications. We consider the implementation of stretch reflex in the actual robot, its active/passive applications, and the change in behavior according to the difference of parameters.

cs.RO↗

Exceeding the Maximum Speed Limit of the Joint Angle for the Redundant Tendon-driven Structures of Musculoskeletal Humanoids

The musculoskeletal humanoid has various biomimetic benefits, and the redundant muscle arrangement is one of its most important characteristics. This redundancy can achieve fail-safe redundant actuation and variable stiffness control. However, there is a problem that the maximum joint angle velocity is limited by the slowest muscle among the redundant muscles. In this study, we propose two methods that can exceed the limited maximum joint angle velocity, and verify the effectiveness with actual robot experiments.

cs.RO↗

Design Optimization of Musculoskeletal Humanoids with Maximization of Redundancy to Compensate for Muscle Rupture

Musculoskeletal humanoids have various biomimetic advantages, and the redundant muscle arrangement allowing for variable stiffness control is one of the most important. In this study, we focus on one feature of the redundancy, which enables the humanoid to keep moving even if one of its muscles breaks, an advantage that has not been dealt with in many studies. In order to make the most of this advantage, the design of muscle arrangement is optimized by considering the maximization of minimum available torque that can be exerted when one muscle breaks. This method is applied to the elbow of a musculoskeletal humanoid Musashi with simulations, the design policy is extracted from the optimization results, and its effectiveness is confirmed with the actual robot.

cs.RO↗

Task-specific Self-body Controller Acquisition by Musculoskeletal Humanoids: Application to Pedal Control in Autonomous Driving

The musculoskeletal humanoid has many benefits that human beings have, but the modeling of its complex flexible body is difficult. Although we have developed an online acquisition method of the nonlinear relationship between joints and muscles, we could not completely match the actual robot and its self-body image. When realizing a certain task, the direct relationship between the control input and task state needs to be learned. So, we construct a neural network representing the time-series relationship between the control input and task state, and realize the intended task state by applying the network to a real-time control. In this research, we conduct accelerator pedal control experiments as one application, and verify the effectiveness of this study.

cs.RO↗

Modification of muscle antagonistic relations and hand trajectory on the dynamic motion of Musculoskeletal Humanoid

In recent years, some research on musculoskeletal humanoids is in progress. However, there are some challenges such as unmeasurable transformation of body structure and muscle path, and difficulty in measuring own motion because of lack of joint angle sensor. In this study, we suggest two motion acquisition methods. One is a method to acquire antagonistic relations of muscles by tension sensing, and the other is a method to acquire correct hand trajectory by vision sensing. Finally, we realize badminton shuttlecock-hitting motion of Kengoro with these two acquisition methods.

cs.RO↗

Motion Modification Method of Musculoskeletal Humanoids by Human Teaching Using Muscle-Based Compensation Control

While musculoskeletal humanoids have the advantages of various biomimetic structures, it is difficult to accurately control the body, which is challenging to model. Although various learning-based control methods have been developed so far, they cannot completely absorb model errors, and recognition errors are also bound to occur. In this paper, we describe a method to modify the movement of the musculoskeletal humanoid by applying external force during the movement, taking advantage of its flexible body. Considering the fact that the joint angles cannot be measured, and that the external force greatly affects the nonlinear elastic element and not the actuator, the modified motion is reproduced by the proposed muscle-based compensation control. This method is applied to a musculoskeletal humanoid, Musashi, and its effectiveness is confirmed.

cs.RO↗

Self-Body Image Acquisition and Posture Generation with Redundancy using Musculoskeletal Humanoid Shoulder Complex for Object Manipulation

We proposed a method for learning the actual body image of a musculoskeletal humanoid for posture generation and object manipulation using inverse kinematics with redundancy in the shoulder complex. The effectiveness of this method was confirmed by realizing automobile steering wheel operation. The shoulder complex has a scapula that glides over the rib cage and an open spherical joint, and is supported by numerous muscle groups, enabling a wide range of motion. As a development of the human mimetic shoulder complex, we have increased the muscle redundancy by implementing deep muscles and stabilize the joint drive. As a posture generation method to utilize the joint redundancy of the shoulder complex, we consider inverse kinematics based on the scapular drive strategy suggested by the scapulohumeral rhythm of the human body. In order to control a complex robot imitating a human body, it is essential to learn its own body image, but it is difficult to know its own state accurately due to its deformation which is difficult to measure. To solve this problem, we developed a method to acquire a self-body image that can be updated appropriately by recognizing the hand position relative to an object for the purpose of object manipulation. We apply the above methods to a full-body musculoskeletal humanoid, Kengoro, and confirm its effectiveness by conducting an experiment to operate a car steering wheel, which requires the appropriate use of both arms.

cs.RO↗

Component Modularized Design of Musculoskeletal Humanoid Platform Musashi to Investigate Learning Control Systems

To develop Musashi as a musculoskeletal humanoid platform to investigate learning control systems, we aimed for a body with flexible musculoskeletal structure, redundant sensors, and easily reconfigurable structure. For this purpose, we develop joint modules that can directly measure joint angles, muscle modules that can realize various muscle routes, and nonlinear elastic units with soft structures, etc. Next, we develop MusashiLarm, a musculoskeletal platform composed of only joint modules, muscle modules, generic bone frames, muscle wire units, and a few attachments. Finally, we develop Musashi, a musculoskeletal humanoid platform which extends MusashiLarm to the whole body design, and conduct several basic experiments and learning control experiments to verify the effectiveness of its concept.

cs.RO↗

Robust Continuous Motion Strategy Against Muscle Rupture using Online Learning of Redundant Intersensory Networks for Musculoskeletal Humanoids

Musculoskeletal humanoids have various biomimetic advantages, of which redundant muscle arrangement is one of the most important features. This feature enables variable stiffness control and allows the robot to keep moving its joints even if one of the redundant muscles breaks, but this has been rarely explored. In this study, we construct a neural network that represents the relationship among sensors in the flexible and difficult-to-modelize body of the musculoskeletal humanoid, and by learning this neural network, accurate motions can be achieved. In order to take advantage of the redundancy of muscles, we discuss the use of this network for muscle rupture detection, online update of the intersensory relationship considering the muscle rupture, and body control and state estimation using the muscle rupture information. This study explains a method of constructing a musculoskeletal humanoid that continues to move and perform tasks robustly even when one muscle breaks.

cs.RO↗

Human-mimetic binaural ear design and sound source direction estimation for task realization of musculoskeletal humanoids

Human-like environment recognition by musculoskeletal humanoids is important for task realization in real complex environments and for use as dummies for test subjects. Humans integrate various sensory information to perceive their surroundings, and hearing is particularly useful for recognizing objects out of view or out of touch. In this research, we aim to realize human-like auditory environmental recognition and task realization for musculoskeletal humanoids by equipping them with a human-like auditory processing system. Humans realize sound-based environmental recognition by estimating directions of the sound sources and detecting environmental sounds based on changes in the time and frequency domain of incoming sounds and the integration of auditory information in the central nervous system. We propose a human mimetic auditory information processing system, which consists of three components: the human mimetic binaural ear unit, which mimics human ear structure and characteristics, the sound source direction estimation system, and the environmental sound detection system, which mimics processing in the central nervous system. We apply it to Musashi, a human mimetic musculoskeletal humanoid, and have it perform tasks that require sound information outside of view in real noisy environments to confirm the usefulness of the proposed methods.

cs.RO↗

Antagonist Inhibition Control in Redundant Tendon-driven Structures Based on Human Reciprocal Innervation for Wide Range Limb Motion of Musculoskeletal Humanoids

The body structure of an anatomically correct tendon-driven musculoskeletal humanoid is complex, and the difference between its geometric model and the actual robot is very large because expressing the complex routes of tendon wires in a geometric model is very difficult. If we move a tendon-driven musculoskeletal humanoid by the tendon wire lengths of the geometric model, unintended muscle tension and slack will emerge. In some cases, this can lead to the wreckage of the actual robot. To solve this problem, we focused on reciprocal innervation in the human nervous system, and then implemented antagonist inhibition control (AIC) based on the reflex. This control makes it possible to avoid unnecessary internal muscle tension and slack of tendon wires caused by model error, and to perform wide range motion safely for a long time. To verify its effectiveness, we applied AIC to the upper limb of the tendon-driven musculoskeletal humanoid, Kengoro, and succeeded in dangling for 14 minutes and doing pull-ups.

cs.RO↗

Automatic Grouping of Redundant Sensors and Actuators Using Functional and Spatial Connections: Application to Muscle Grouping for Musculoskeletal Humanoids

For a robot with redundant sensors and actuators distributed throughout its body, it is difficult to construct a controller or a neural network using all of them due to computational cost and complexity. Therefore, it is effective to extract functionally related sensors and actuators, group them, and construct a controller or a network for each of these groups. In this study, the functional and spatial connections among sensors and actuators are embedded into a graph structure and a method for automatic grouping is developed. Taking a musculoskeletal humanoid with a large number of redundant muscles as an example, this method automatically divides all the muscles into regions such as the forearm, upper arm, scapula, neck, etc., which has been done by humans based on a geometric model. The functional relationship among the muscles and the spatial relationship of the neural connections are calculated without a geometric model.

cs.RO↗