arXiv subjects

Yuma Okazaki

Publications and source records attributed to Yuma Okazaki.

15 recordsLinked to original sources

arXiv2026

Helium-Gas-Cooled Cryogenic Current Comparator Integrated with a Quantum Resistance Standard

We report a cryogen-free cryogenic current comparator (CCC) system for precision resistance measurements. A helium-gas chamber was developed and installed on the 4 K stage of a cryogen-free dilution refrigerator equipped with a pulse-tube cryocooler. The CCC probe was housed in this chamber and was cooled through helium gas serving as a heat exchange medium. The metrological performance of this helium-gas-cooled CCC was evaluated through precision resistance-ratio measurements and found to be comparable to that obtained under liquid-helium cooling. A quantum Hall resistance (QHR) device was also integrated into the same refrigerator, enabling QHR/100~$\Omega$ resistance-ratio measurements. The type-A uncertainty reached the 1~n$\Omega$/$\Omega$ level within an averaging time of 100~s, and the resulting resistance-ratio measurements agreed well with conventional liquid-helium-based measurements at the level of a few n$\Omega$/$\Omega$. The system provides this level of measurement performance while consuming less than 1~L of helium gas per thermal cycle.

physics.ins-det↗

arXiv2025

Eigenstate control of plasmon wavepackets with electron-channel blockade

Coherent manipulation of plasmon wavepackets in solid-state systems is crucial for advancing nanoscale electronic devices, offering a unique platform for quantum information processing based on propagating quantum bits. Controlling the eigenstate of plasmon wavepackets is essential, as it determines its propagation speed and hence the number of quantum operations that can be performed during its flight-time through a quantum system. When plasmon wavepackets are generated by short voltage pulses and transmitted through nanoscale devices, they distribute among multiple electron conduction channels via Coulomb interactions, a phenomenon known as charge fractionalisation. This spreading complicates plasmon manipulation in quantum circuits and makes precise control of the eigenstates of plasmon wavepackets challenging. Using a cavity, we demonstrate the ability to isolate and select electron conduction channels contributing to plasmon excitation, thus enabling precise control of plasmon eigenstate. Specifically, we observe an electron-channel blockade effect, where charge fractionalisation into cavity-confined channels is suppressed due to the plasmon's narrow energy distribution, enabling more stable and predictable plasmonic circuits. This technique provides a versatile tool for designing plasmonic circuits, offering the ability to tailor plasmon speed through local parameters, minimise unwanted plasmon excitation in adjacent circuits, and enable the precise selection of electron-channel plasmon eigenstates in quantum interferometers.

cond-mat.mes-hall↗

arXiv2025

Generation of a single-cycle surface acoustic wave pulse on LiNbO$_3$ for application to thin film materials

Surface acoustic wave (SAW) technology has been explored in thin-film materials to discover fundamental phenomena and to investigate their physical properties. It is used to excite and manipulate quasi-particles such as phonons or magnons, and can dynamically modulate the properties of the materials. In the field, SAWs are typically excited by a continuous wave at a resonant frequency. Recently, generation of a single-cycle SAW pulse has been demonstrated on GaAs substrate. Such a SAW pulse provides a potential to access a single quasi-particle excitation and to investigate its dynamics by time-resolved measurements. On the other hand, to modulate and control the properties of thin film materials, it is generally required to generate high-intensity SAWs. In this work, we demonstrate the efficient generation of a SAW pulse using a chirp interdigital transducer (IDT) on LiNbO$_3$ substrate. We have fabricated chirp IDT devices with bandwidths from 0.5 GHz to 5.5 GHz. We also confirmed the generation of a SAW pulse with 0.3 ns FWHM (full width at half maximum) by performing time-resolved measurements. The conversion efficiency between input power and SAW on LiNbO$_3$ substrate is approximately 45 times larger than that on GaAs substrate. This enables us to generate a high-intensity SAW pulse, meeting the requirement for the modulation of thin films. Our results will expand the research in the field, such as spintronics and magnonics, and lead to their further advancements.

cond-mat.mes-hall↗

arXiv2024

Probing instantaneous quantum circuit refrigeration in the quantum regime

Recent advancements in circuit quantum electrodynamics have enabled precise manipulation and detection of the single energy quantum in quantum systems. A quantum circuit refrigerator (QCR) is capable of electrically cooling the excited population of quantum systems, such as superconducting resonators and qubits, through photon-assisted tunneling of quasi-particles within a superconductor-insulator-normal metal junction. In this study, we demonstrated instantaneous QCR in the quantum regime. We performed the time-resolved measurement of the QCR-induced cooling of photon number inside the superconducting resonator by harnessing a qubit as a photon detector. From the enhanced photon loss rate of the resonator estimated from the amount of the AC Stark shift, the QCR was shown to have a cooling power of approximately 300 aW. Furthermore, even below the single energy quantum, the QCR can reduce the number of photons inside the resonator with 100 ns pulse from thermal equilibrium. Numerical calculations based on the Lindblad master equation successfully reproduced these experimental results.

quant-ph↗

arXiv2023

Suppression of Electromagnetic Crosstalk by Differential Excitation for SAW Generation

Surface acoustic waves (SAWs) hold a vast potential in various fields such as spintronics, quantum acoustics, and electron-quantum optics, but an electromagnetic wave emanating from SAW generation circuits has often been a major hurdle. Here, we investigate a differential excitation method of interdigital transducers (IDTs) to generate SAWs while reducing the electromagnetic wave. The results show that electromagnetic waves are suppressed by more than 90% in all directions. This suppression overcomes the operating limits and improves the scalability of SAW systems. Our results promise to facilitate the development of SAW-based applications in a wide range of research fields.

cond-mat.mes-hall↗

arXiv2023

On-Demand Single-Electron Source via Single-Cycle Acoustic Pulses

Surface acoustic waves (SAWs) are a reliable solution to transport single electrons with precision in piezoelectric semiconductor devices. Recently, highly efficient single-electron transport with a strongly compressed single-cycle acoustic pulse has been demonstrated. This approach, however, requires surface gates constituting the quantum dots, their wiring, and multiple gate movements to load and unload the electrons, which is very time-consuming. Here, on the contrary, we employ such a single-cycle acoustic pulse in a much simpler way - without any quantum dot at the entrance or exit of a transport channel - to perform single-electron transport between distant electron reservoirs. We observe the transport of a solitary electron in a single-cycle acoustic pulse via the appearance of the quantized acousto-electric current. The simplicity of our approach allows for on-demand electron emission with arbitrary delays on a ns time scale. We anticipate that enhanced synthesis of the SAWs will facilitate electron-quantum-optics experiments with multiple electron flying qubits.

cond-mat.mes-hall↗

arXiv2023

Active Initialization Experiment of Superconducting Qubit Using Quantum-circuit Refrigerator

The initialization of superconducting qubits is one of the essential techniques for the realization of quantum computation. In previous research, initialization above 99\% fidelity has been achieved at 280 ns. Here, we demonstrate the rapid initialization of a superconducting qubit with a quantum-circuit refrigerator (QCR). Photon-assisted tunneling of quasiparticles in the QCR can temporally increase the relaxation time of photons inside the resonator and helps release energy from the qubit to the environment. Experiments using this protocol have shown that 99\% of initialization time is reduced to 180 ns. This initialization time depends strongly on the relaxation rate of the resonator, and faster initialization is possible by reducing the resistance of the QCR, which limits the ON/OFF ratio, and by strengthening the coupling between the QCR and the resonator.

quant-ph↗

arXiv2022

Generation of a single-cycle acoustic pulse: a scalable solution for transport in single-electron circuits

The synthesis of single-cycle, compressed optical and microwave pulses sparked novel areas of fundamental research. In the field of acoustics, however, such a generation has not been introduced yet. For numerous applications, the large spatial extent of surface acoustic waves (SAW) causes unwanted perturbations and limits the accuracy of physical manipulations. Particularly, this restriction applies to SAW-driven quantum experiments with single flying electrons, where extra modulation renders the exact position of the transported electron ambiguous and leads to undesired spin mixing. Here, we address this challenge by demonstrating single-shot chirp synthesis of a strongly compressed acoustic pulse. Employing this solitary SAW pulse to transport a single electron between distant quantum dots with an efficiency exceeding 99%, we show that chirp synthesis is competitive with regular transduction approaches. Performing a time-resolved investigation of the SAW-driven sending process, we outline the potential of the chirped SAW pulse to synchronize single-electron transport from many quantum-dot sources. By superimposing multiple pulses, we further point out the capability of chirp synthesis to generate arbitrary acoustic waveforms tailorable to a variety of (opto)nanomechanical applications. Our results shift the paradigm of compressed pulses to the field of acoustic phonons and pave the way for a SAW-driven platform of single-electron transport that is precise, synchronized, and scalable.

cond-mat.mes-hall↗

arXiv2021

Heat-Driven Electron-Motion in a Nanoscale Electronic Circuit

We study the interaction between two closely spaced but electrically isolated quasi-one-dimensional electrical wires by a drag experiment. In this work we experimentally demonstrate the generation of current in an unbiased (drag) wire, which results from the interactions with a neighboring biased (drive) wire. The direction of the drag current depends on the length of the one-dimensional wire with respect to the position of the barrier in the drag wire. When we additionally form a potential barrier in the drive wire, the direction of the drag current is determined by the relative position of the two barriers. We interpret this behavior in terms of electron excitations by phonon-mediated interactions between the two wires in presence of the electron scattering inside the drive wire.

cond-mat.mes-hall↗

arXiv2021

In-flight distribution of an electron within a surface acoustic wave

Surface acoustic waves (SAW) have large potential to realize quantum-optics-like experiments with single flying electrons employing their spin or charge degree of freedom. For such quantum applications, highly efficient trapping of the electron in a specific moving quantum dot (QD) of a SAW train plays a key role. Probabilistic transport over multiple moving minima would cause uncertainty in synchronisation that is detrimental for coherence of entangled flying electrons and in-flight quantum operations. It is thus of central importance to identify the device parameters enabling electron transport within a single SAW minimum. A detailed experimental investigation of this aspect is so far missing. Here we fill this gap by demonstrating time-of-flight measurements for a single electron that is transported via a SAW train between distant stationary QDs. Our measurements reveal the in-flight distribution of the electron within the moving acousto-electric quantum dots of the SAW train. Increasing the acousto-electric amplitude, we observe the threshold necessary to confine the flying electron at a specific, deliberately chosen SAW minimum. Investigating the effect of a barrier along the transport channel, we also benchmark the robustness of SAW-driven electron transport against stationary potential variations. Our results pave the way for highly controlled transport of electron qubits in a SAW-driven platform for quantum experiments.

cond-mat.mes-hall↗

arXiv2021

Parity-dependent shot noise and spin-flip relaxation process in a hybrid superconductor-nanowire quantum dot

We report shot noise measurements for a quantum dot formed in an InAs nanowire suspended between superconducting electrodes. We find a clear alternation for the shot noise value in the Coulomb blockade regime between even and odd electron occupation in the dot, indicating that super-Poissonian (Poissonian) shot noise with the Fano factor reaching around 2 (1) occurs for even (odd) parity. With increasing magnetic field, the parity effect disappears and all the regimes show the Fano factor of around 1. The whole observation in our experiments quantitatively agrees with simulation obtained from full-counting statistics of cotunneling including spin-flip relaxation process, which corresponds to modelling electron motion in a quantum dot with strong spin-orbit interaction.

cond-mat.mes-hall↗

arXiv2016

Interplay of the inverse proximity effect and magnetic field in out-of-equilibrium single-electron devices

The magnetic field is shown to affect significantly non-equilibrium quasiparticle (QP) distributions under conditions of inverse proximity effect on the remarkable example of a single-electron hybrid turnstile. This effect suppresses the gap in the superconducting leads in the vicinity of turnstile junctions with a Coulomb blockaded island, thus, trapping hot QPs in this region. Applied magnetic field creates additional QP traps in the form of vortices or regions with reduced superconducting gap in the leads resulting in release of QPs away from junctions. We present clear experimental evidence of such interplay of the inverse proximity effect and a magnetic field revealing itself in the superconducting gap enhancement in a magnetic field as well as in significant improvement of the turnstile characteristics. The observed interplay of the inverse proximity effect and external magnetic field, and its theoretical explanation in the context of QP overheating are important for various superconducting and hybrid nanoelectronic devices, which find applications in quantum computation, photon detection and quantum metrology.

cond-mat.mes-hall↗

arXiv2015

Design and Analysis on a Cryogenic Current Amplifier with a Superconducting Microwave Resonator

We propose a new type of cryogenic current amplifiers, in which low-frequency power spectrum of current can be measured through a measurement of microwave response of a superconducting resonant circuit shunted by a series array of Josephson junctions. From numerical analysis on the equivalent circuit, the numerical value of the input-referred current noise of the proposed amplifier is found to be two orders of magnitude lower than the noise floor measured with the conventional cryogenic current amplifiers based on high-electron-mobility transistors or superconducting quantum interference devices. Our proposal can open new avenues for investigating low-temperature solid-state devices that require lower noise and wider bandwidth power spectrum measurements of current.

physics.ins-det↗

arXiv2013

Shot noise spectroscopy on a semiconductor quantum dot in the elastic and inelastic cotunneling regimes

We report shot noise spectroscopy on a semiconductor quantum dot in a cotunneling regime. The DC conductance measurements show clear signatures of both elastic and inelastic cotunneling transport inside a Coulomb diamond. We observed Poissonian shot noise with the Fano factor $F\approx 1$ in the elastic cotunneling regime, and super-Poissonian Fano factor $1<F<3$ in the inelastic cotunneling regime. The differences in the value of the Fano factor between elastic and inelastic processes reveal the microscopic mechanisms involved in the cotunneling transport.

cond-mat.mes-hall↗

arXiv2011

Spin-orbital Kondo effect in a parallel double quantum dot

Transport properties of the two-orbital Kondo effect involving both spin and orbital (pseudospin) degrees of freedom were examined in a parallel double quantum dot with a sufficient interdot Coulomb interaction and negligibly small interdot tunneling. The Kondo effect was observed at the interdot Coulomb blockade region with degeneracies of both spin and orbital degrees of freedom. When the orbital degeneracy is lifted by applying a finite detuning, the Kondo resonance exhibits a triple-peak structure, indicating that both spin and orbital contributions are involved.

cond-mat.mes-hall↗