arXiv subjects

Yun Meng

Publications and source records attributed to Yun Meng.

8 recordsLinked to original sources

arXiv2026

Structured Cavity Quantum Electrodynamics

A cavity quantum electrodynamics (cQED) system consisting of a confined single photon and a single quantum emitter serves as a fundamental block for quantum optics and photonic quantum technologies. The canonical optical mode employed in the conventional cavity quantum electrodynamics features a uniform polarization distribution, leading to the scalar light-matter interaction in most existing experiments. Despite the rapid progress in the generation of structured light with spatially varied polarizations, the structured light-matter interaction, especially at the single quanta level, is highly intriguing yet largely unexplored. Here, we present the structured light-matter interaction at the single-photon level in a semiconductor cavity quantum electrodynamics system. Four distinct structured cavity modes that are spectrally close to each other are constructed in a micropillar cavity. By spatially locating a single epitaxial quantum dot (QD) at the periphery of a semiconductor micropillar cavity and spectrally tuning the QD emission wavelength into the resonances of the structured cavity modes, cavity-enhanced single-photon emissions with spin-locked chiral orbital angular momentum (OAM) and engineerable spin-orbit entanglements are achieved within a single wavelength-scale device. Our work opens an unexplored paradigm of structured quantum light-matter interactions and may further advance chiral quantum optics and high-dimensional photonic quantum technology.

physics.optics↗

arXiv2025

Finite Element Analysis of Shear Lag Effect in Long-Span Single-Box Continuous Rigid Bridges

As the span and width of continuous rigid bridges increase, the complexity of the spatial forces acting on these structures also grows, challenging traditional design methods. Primary beam theory often fails to accurately predict the stresses in the bridge girder, leading to potential overestimation of the ultimate capacity of these bridges. This study addresses this gap by developing a detailed finite element (FE) model of a continuous rigid bridge using ABAQUS, which accounts for the complex 3D geometry, construction procedures, and nonlinear material interactions. A loading test on a 210-meter continuous rigid bridge is performed to validate the model, with the measured strain and deflection data closely matching the FE simulation results. The study also examines stress distributions under constant and live loads, as well as the shear lag coefficients of the main girder. Through parametric analysis, we explore the effects of varying the width-to-span and height-to-width ratios. The results reveal that both a wider box girder and a larger span significantly amplify the shear lag effect in the bridge girder. The findings enhance the understanding of stress distribution in large-scale rigid bridges and provide critical insights for more accurate design and as-sessment of such structures.

math.NA↗

arXiv2024

Cavity-Quantum Electrodynamics with Moir\'e Flatband Photonic Crystals

Quantum emitters are a key component in photonic quantum technologies. Enhancing their single-photon emission by engineering the photonic environment using cavities can significantly improve the overall efficiency in quantum information processing. However, this enhancement is often constrained by the need for precise nanoscale control over the emitter's position within micro- or nano-cavities. Inspired by the fascinating physics of moir\'e patterns, we present an approach to strongly modify the spontaneous emission rate of a quantum emitter using a finely designed multilayer moir\'e photonic crystal with a robust isolated-flatband dispersion. Theoretical analysis reveals that, due to its nearly infinite photonic density of states, the moir\'e cavity can simultaneously achieve a high Purcell factor and exhibit large tolerance over the emitter's position. We experimentally demonstrate the coupling between this moir\'e cavity and a quantum dot through the cavity-determined polarization of the dot's emission. The radiative lifetime of the quantum dot can be tuned by a factor of 40, ranging from 42 ps to 1692 ps, which is attributed to strong Purcell enhancement and Purcell inhibition effects. Our findings pave the way for moir\'e flatband cavity-enhanced quantum light sources, quantum optical switches, and quantum nodes for quantum internet applications.

physics.optics↗

arXiv2022

Coherent control of a high-orbital hole in a semiconductor quantum dot

Coherently driven semiconductor quantum dots are one of the most promising platforms for non-classical light sources and quantum logic gates which form the foundation of photonic quantum technologies. However, to date, coherent manipulation of single charge carriers in quantum dots is limited mainly to their lowest orbital states. Ultrafast coherent control of high-orbital states is obstructed by the demand for tunable terahertz pulses. To break this constraint, we demonstrate an all-optical method to control high-orbital states of a hole via stimulated Auger process. The coherent nature of the Auger process is proved by Rabi oscillation and Ramsey interference. Harnessing this coherence further enables the investigation of single-hole relaxation mechanism. A hole relaxation time of 161 ps is observed and attributed to the phonon bottleneck effect. Our work opens new possibilities for understanding the fundamental properties of high-orbital states in quantum emitters and developing new types of orbital-based quantum photonic devices.

quant-ph↗

arXiv2022

Fractal superconducting nanowires detect infrared single photons with 84% system detection efficiency, 1.02 polarization sensitivity, and 20.8 ps timing resolution

The near-unity system detection efficiency (SDE) and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes SDE dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high SDE would get compromised, which could be detrimental for photon-starved applications. Here, we create SNSPDs with an arced fractal geometry that almost completely eliminates this polarization dependence of the SDE, and we experimentally demonstrate 84$\pm$3$\%$ SDE, 1.02$^{+0.06}_{-0.02}$ polarization sensitivity at the wavelength of 1575 nm, and 20.8 ps timing jitter in a 0.1-W closed-cycle Gifford-McMahon cryocooler, at the base temperature of 2.0 K. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near-, and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high SDE and high timing resolution

quant-ph↗

arXiv2022

Double-Pulse Generation of Indistinguishable Single Photons with Optically Controlled Polarization

Single-photon sources play a key role in photonic quantum technologies. Semiconductor quantum dots can emit indistinguishable single photons under resonant excitation. However, the resonance fluorescence technique typically requires cross-polarization filtering which causes a loss of the unpolarized quantum dot emission by 50%. To solve this problem, we demonstrate a method to generate indistinguishable single photons with optically controlled polarization by two laser pulses off-resonant with neutral exciton states. This scheme is realized by exciting the quantum dot to the biexciton state and subsequently driving the quantum dot to an exciton eigenstate. Combining with magnetic field, we demonstrated the generation of photons with optically controlled polarization (polarization degree of 101(2)%), laser-neutral exciton detuning up to 0.81 meV, high single-photon purity (99.6(1)%) and indistinguishability (85(4)%). Laser pulses can be blocked using polarization and spectral filtering. Our work makes an important step towards indistinguishable single-photon sources with near-unity collection efficiency.

quant-ph↗

arXiv2021

Multi-spectral programmable absorbers

We designed and demonstrated a multi-spectral programmable perfect absorber that exploits two different phase-change materials. This programmability is possible by resonantly coupling two phase change materials, a Ge2Sb2Te5 layer to vanadium dioxide nanoparticles (VO2 NPs). The perfect absorption is attributed to the coalescence of gap plasmon modes excited between the NPs and waveguide cavity-like modes excited between the film and the NPs. The absorptance peak (>90%) can be tuned to four different infrared (IR) wavelengths from 1906 to 2960 nm by heating the structure to different temperatures. The perfect absorber is reconfigurable, lithography-free, large-scale, polarization-insensitive omnidirectional. Our strategy opens a new path for programmable infrared photonics.

physics.optics↗

arXiv2020

A platform for high performance photon correlation measurements

A broad range of scientific and industrial disciplines require precise optical measurements at very low light levels. Single-photon detectors combining high efficiency and high time resolution are pivotal in such experiments. By using relatively thick films of NbTiN (8-11\,nm) and improving the pattern fidelity of the nano-structure of the superconducting nanowire single-photon detectors (SNSPD), we fabricated devices demonstrating superior performance over all previously reported detectors in the combination of efficiency and time resolution. Our findings prove that small variations in the nanowire width, in the order of a few nanometers, can lead to a significant penalty on their temporal response. Addressing these issues, we consistently achieved high time resolution (best device 7.7\,ps, other devices $\sim$10-16\,ps) simultaneously with high system detection efficiencies ($80-90\%$) in the wavelength range of 780-1000\,nm, as well as in the telecom bands (1310-1550\,nm). The use of thicker films allowed us to fabricate large-area multi-pixel devices with homogeneous pixel performance. We first fabricated and characterized a $100\times100\, μm^2$ 16-pixel detector and showed there was little variation among individual pixels. Additionally, to showcase the power of our platform, we fabricated and characterized 4-pixel multimode fiber-coupled detectors and carried out photon correlation experiments on a nanowire quantum dot resulting in $g^2(0)$ values lower than 0.04. The multi-pixel detectors alleviate the need for beamsplitters and can be used for higher order correlations with promising prospects not only in the field of quantum optics, but also in bio-imaging applications, such as fluorescence microscopy and positron emission tomography.

physics.ins-det↗