Searcharxiv⌕ Search

arXiv subjects

Yunfan Ren

Publications and source records attributed to Yunfan Ren.

At least 19 recordsLinked to original sources

AFTER: A World Model with Adaptive Fast--Slow Timescales for Error-Driven Retention

In robotics and embodied AI, a core challenge for world models is adapting to sudden, persistent, yet initially unknown changes in robot dynamics during interaction. For instance, when a robotic arm grasps an object with an unknown payload, the robot dynamics change suddenly. If the world model fails to adapt, its prediction errors accumulate over the open-loop rollout and ultimately mislead the robot's actions. Existing world models, however, struggle to simultaneously satisfy three critical requirements for dynamics adaptation: responsiveness, reacting promptly to sudden changes to curb prediction error accumulation; stability, distinguishing persistent changes from transient disturbances to prevent incorrect updates; and persistence, retaining the adapted dynamics without new observations so that later predictions do not revert to the old dynamics. Inspired by predictive coding in the human brain with multi-timescale adaptation, we propose AFTER-WM, a world model with Adaptive Fast-slow Timescales for Error-driven Retention, whose prediction errors drive a fast correction that fades and a slow correction that persists, while dynamically adjusting the combination weights of pre-trained experts without altering them, to overcome the trade-offs among responsiveness, stability and persistence. On five simulated robot datasets and real UAV data, AFTER-WM has a lower multi-step mean error than all ten compared models and the highest mean return in a joint-failure control task. In simulation, its multistep mean error is 16%-34% below the strongest compared model's and is also the lowest 1-4 steps after a change and under transient disturbances alone, and its step-40 error is the lowest as well, reflecting responsiveness, stability and persistence. All code (method, baselines, experiments) and datasets will be released online.

cs.AI↗

Learning Event-based Obstacle Avoidance via Differentiable Simulation

Reliable obstacle avoidance is essential for safe quadrotor flight in unknown environments, yet conventional frame-based cameras remain challenged by motion blur, limited dynamic range, and latency under fast motion. Event cameras, with sub-millisecond latency, high dynamic range, and negligible motion blur, offer a promising alternative, but leveraging them for closed-loop control remains difficult. Existing approaches either adopt cascaded architectures that first estimate depth and then map it to control commands, introducing error propagation, or achieve end-to-end control through costly offline pretraining before online fine-tuning can even begin. We address these challenges with a CUDA-based event simulator that exploits GPU parallelism to render events efficiently within the training loop, integrated into a differentiable simulation pipeline that enables direct gradient backpropagation through the differentiable physics model, improving sample efficiency. This allows us to train an end-to-end policy that maps event frames directly to control commands, without intermediate depth estimation. We validate our approach through zero-shot real-world deployment on a quadrotor, achieving robust obstacle avoidance in both odometry-assisted and odometry-free settings, including under low-light conditions where conventional cameras typically fail.

cs.RO↗

Learning Visuomotor Quadrotor Flight Through Dynamic Narrow Gaps via Differentiable Simulation

Threading a quadrotor through a moving narrow gap is a demanding test of agile flight, requiring centimeter-level spatial alignment and precise temporal execution. We address this challenge using a control policy that operates directly on onboard visual and inertial measurements to output collective thrust and body-rate commands. The task is difficult because success lies on a thin feasible manifold: small errors in timing, position, attitude, or visual observability cause collision. Prior planning and learning methods rely on privileged state, teachers, planners, or distillation; learning dynamic narrow-gap traversal directly, from scratch, remains open. We introduce a differentiable moving-gap formulation that gates centering, alignment, and smooth collision terms by signed distance to a time-varying gap plane, turning a sparse traversal event into a dense pathwise objective. We integrate this formulation into a visual-feature-to-command policy trained in one stage from random initialization, without a teacher, planner, or distillation. We validate our approach in both synthetic and real-world experiments. In controlled benchmarks, we demonstrate that pathwise gradients significantly outperform score-function gradients for precision-critical tasks, yielding a 99.3% success rate in simulation after only a few minutes of training on a single GPU. Furthermore, the policy transfers directly to a real quadrotor, successfully crossing a dynamic narrow gap from varied initial conditions using onboard sensing and inertial measurements, achieving an 80% success rate over 10 physical trials.

cs.RO↗

State-Dependent Objective Coordination for End-to-End Balance and Navigation

Traditional robotic navigation systems separate mapping, planning, and low-level control through cascaded modules, introducing computational overhead and accumulated latency. End-to-end reinforcement learning offers a compact unified policy that maps onboard observations directly to control actions. However, on inherently unstable platforms such as two-wheeled inverted-pendulum robots, navigation progress and obstacle avoidance can conflict with attitude stabilization in a strongly state-dependent manner. We propose a lightweight state-dependent objective coordination method for integrated navigation and control. A pitch-conditioned scalarization coefficient $β(s)\in[0,1]$ adjusts the relative contributions of balance stabilization and navigation objectives during training, without extra control hierarchies or auxiliary attitude-stabilization controllers, such as proportional-integral-derivative (PID) or linear-quadratic regulator (LQR) controllers. To support zero-shot deployment, simulation training models execution delay, action hold, asynchronous and noisy observations, and dynamics uncertainty. Gradient analysis reveals persistent directional interference and state-dependent variation in the objectives' relative scales. Comparisons with alternative reward-weighting, constraint, training, and control-structure strategies show that PPO+$β(s)$, where PPO denotes proximal policy optimization, achieves 98% and 95% success rates with small attitude excursions on the fixed obstacle map and the randomly generated high-obstacle-density map, respectively. Zero-shot hardware experiments further demonstrate bounded attitude behavior and consistent obstacle avoidance using only onboard observations. Training and evaluation code will be made publicly available upon acceptance.

cs.RO↗

Learning Wheel Motion Uncertainty for Degeneracy-Aware LiDAR-Inertial Odometry on Quadrupedal Wheel-Legged Robots

Wheel kinematics can support odometry for quadrupedal wheel-legged robots when LiDAR geometry provides weak motion constraints. However, slip and contact loss make rolling predictions unreliable, and contact state alone cannot determine their reliability across motion directions. We propose a tightly coupled LiDAR-inertial-kinematic odometry framework that retains analytical rolling predictions and learns per-wheel, direction-dependent process covariances from proprioceptive history. The estimator maintains moving wheel-center states, allowing the learned uncertainty to regulate the influence of rolling predictions through forward-kinematic corrections. Degeneracy-aware projection (DAP) complements this mechanism by suppressing LiDAR constraints along geometrically weak directions. The learned covariance network (CovNet) is trained through a differentiable filter using simulated velocity supervision and deployed on the real robot without fine-tuning. On the six room sequences with the highest degeneracy ratios in our indoor dataset, the method reduces mean per-sequence position root mean square error (RMSE) by 66.2% relative to FAST-LIO2 and by 31.0% relative to a fixed-covariance variant. In a severely degenerate corridor run, it achieves an endpoint position error of 0.198 m, compared with 7.531 m for FAST-LIO2. These results demonstrate robust odometry under challenging geometric and wheel-motion conditions. We plan to publicly release our code and multimodal dataset. Project website: https://weihairuo.github.io/wheel-motion-uncertainty/

cs.RO↗

Visibility-Aware Cooperative Tracking with Decentralized LiDAR-Based Aerial Swarms

Autonomous aerial tracking with drones offers vast potential for surveillance, cinematography, and industrial inspection applications. While single-drone tracking systems have been extensively studied, swarm-based target tracking remains underexplored, despite its unique advantages of distributed perception, fault-tolerant redundancy, and multidirectional target coverage. To bridge this gap, we propose a novel decentralized LiDAR-based swarm tracking framework that enables visibility-aware, cooperative target tracking in complex environments, while fully harnessing the unique capabilities of swarm systems. To address visibility, we introduce a novel Spherical Signed Distance Field (SSDF)-based metric for 3-D environmental occlusion representation, coupled with an efficient algorithm that enables real-time onboard SSDF updating. A general Field-of-View (FOV) alignment cost supporting heterogeneous LiDAR configurations is proposed for consistent target observation. Swarm coordination is enhanced through cooperative costs that enforce inter-robot safe clearance, prevent mutual occlusions, and notably facilitate 3-D multidirectional target encirclement via a novel electrostatic-potential-inspired distribution metric. These innovations are integrated into a hierarchical planner, combining a kinodynamic front-end searcher with a spatiotemporal $SE(3)$ back-end optimizer to generate collision-free, visibility-optimized trajectories.Deployed on heterogeneous LiDAR swarms, our fully decentralized implementation features collaborative perception, distributed planning, and dynamic swarm reconfigurability. Validated through rigorous real-world experiments in cluttered outdoor environments, the proposed system demonstrates robust cooperative tracking of agile targets (drones, humans) while achieving superior visibility maintenance.

cs.RO↗

Learning Agile Quadrotor Flight in the Real World

Learning-based controllers have achieved impressive performance in agile quadrotor flight but typically rely on massive training in simulation, necessitating accurate system identification for effective Sim2Real transfer. However, even with precise modeling, fixed policies remain susceptible to out-of-distribution scenarios, ranging from external aerodynamic disturbances to internal hardware degradation. To ensure safety under these evolving uncertainties, such controllers are forced to operate with conservative safety margins, inherently constraining their agility outside of controlled settings. While online adaptation offers a potential remedy, safely exploring physical limits remains a critical bottleneck due to data scarcity and safety risks. To bridge this gap, we propose a self-adaptive framework that eliminates the need for precise system identification or offline Sim2Real transfer. We introduce Adaptive Temporal Scaling (ATS) to actively explore platform physical limits, and employ online residual learning to augment a simple nominal model. {Based on the learned hybrid model, we further propose Real-world Anchored Short-horizon Backpropagation Through Time (RASH-BPTT) to achieve efficient and robust in-flight policy updates. Extensive experiments demonstrate that our quadrotor reliably executes agile maneuvers near actuator saturation limits. The system evolves a conservative base policy with a peak speed of 1.9 m/s to 7.3 m/s within approximately 100 seconds of flight time. These findings underscore that real-world adaptation serves not merely to compensate for modeling errors, but as a practical mechanism for sustained performance improvement in aggressive flight regimes.

cs.RO↗

Continual Robot Policy Learning via Variational Neural Dynamics

Robots deployed in the real world rarely operate under a single fixed dynamics model: wind changes, payloads vary, batteries drain, contacts shift, and hardware wears. Yet most learning-based controllers are trained once and deployed as if learning were complete. This prevents the robot from using deployment experience to further improve task performance. In this work, we propose a continual learning framework that uses real-world experience to improve robot policies under hidden and recurring dynamics. Our method learns a condition-aware dynamics model from real state-action trajectories by combining an analytical physics prior with a neural residual for unmodeled effects. A recurrent encoder infers the current hidden condition from recent interaction, and this estimate conditions both the residual model and the policy. Policy learning is performed via differentiable simulation using diverse learned dynamics sampled from the latent model. At deployment, these sampled conditions are replaced by conditions inferred online from recent real interaction, allowing the policy to recover recurring dynamics by recognition rather than residual re-fitting. Through extensive simulation studies and real-world experiments, we demonstrate that the framework improves policy performance under diverse unobserved disturbances. On real quadrotor trajectory tracking under changing wind, the policy recovers from recurring disturbances in roughly 1s, about 5x faster than online residual re-fitting. It also reduces large-disturbance hover and tracking errors by 65.7% and 53.3% over the state-of-the-art online adaptation approaches

cs.RO↗

Learning to Throw: Agile and Accurate Cable-Suspended Payload Delivery with a Quadrotor

Quadrotors offer the agility needed to rapidly transport suspended payloads during time-critical applications, including search-and-rescue and medical delivery. While suspended-payload transport and traversal for these missions are well studied, the highly dynamic targeted release of the payload remains comparatively underexplored. State-of-the-art approaches typically rely on model-based trajectory optimization and tracking; however, these methods often yield sub-optimal performance due to conservative feasibility constraints, tracking errors, and the inherent difficulty of analytically modeling flexible rope dynamics. To overcome these limitations, we propose a hybrid simulation framework that couples a high-fidelity analytical quadrotor model with a physics solver for complex rope and payload interactions. By exchanging forces between the two domains at every step, we obtain a physically accurate simulation of the suspended-payload system. Leveraging this environment, we train a deep reinforcement learning (RL) policy that executes agile, accurate payload throws to designated targets. Deployed zero-shot on hardware, our RL policy pushes the boundary of the agility-accuracy trade-off, outperforming the model-based baseline by reducing the landing error by up to 50% and the throw duration by up to 30%. Ablation studies confirm that the coupled simulation is the key enabler of these gains. We further show that the same pipeline trains a policy driven by visual observations rather than an explicit state estimate, achieving accuracy comparable to that of the state-based policy. To accelerate future research in dynamic aerial manipulation, we open-source the simulator to the community upon acceptance.

cs.RO↗

MAD: Mapping-Aware World Models for Agile Quadrotor Flight

Agile quadrotor flight in cluttered scenes requires more than a reactive mapping from a depth image to a control command: the vehicle must remember which regions have been observed, infer nearby occupied space, and act under partial visibility and tight latency. In this paper, we present Mapping-Aware Dreamer (MAD), a geometry-aware world model for vision-based quadrotor flight. Instead of using raw-image reconstruction as the main self-supervised objective, MAD learns recurrent latent dynamics that reconstruct robocentric occupancy and visibility grid maps together with proprioceptive states. This design forces the latent state to encode local geometry, visibility history, and ego-motion in a form that is directly relevant to collision avoidance. MAD is trained in DiffAero using a GPU-parallel map-construction module that provides high-throughput supervision for occupancy and visibility. The learned representation is used in three policy-learning modes: imagination-based MAD-Dreamer and feature-extractor variants based on PPO and SHAC. Across visual navigation and racing tasks, MAD-based agents achieve higher success rates, faster flight, and better cross-task transfer than corresponding vision-only baselines. The model also produces interpretable map predictions and accurate ego-motion estimates from depth observations. We further deploy the learned policy on a physical quadrotor with an Intel RealSense D435i and demonstrate safe indoor and outdoor flight under limited sensing, reaching 9.66 m/s in simulation and 5.05 m/s in real-world forest experiments. These results show that mapping-aware world models provide a practical middle ground between modular aerial navigation and end-to-end learning.

cs.RO↗

Memory-Efficient Boundary Map for Large-Scale Occupancy Grid Mapping

Determining the occupancy status of locations in the environment is a fundamental task for safety-critical robotic applications. Traditional occupancy grid mapping methods subdivide the environment into a grid of voxels, each associated with one of three occupancy states: free, occupied, or unknown. These methods explicitly maintain all voxels within the mapped volume and determine the occupancy state of a location by directly querying the corresponding voxel that the location falls within. However, maintaining all grid voxels in high-resolution and large-scale scenarios requires substantial memory resources. In this paper, we introduce a novel representation that only maintains the boundary of the mapped volume. Specifically, we explicitly represent the boundary voxels, such as the occupied voxels and frontier voxels, while free and unknown voxels are automatically represented by volumes within or outside the boundary, respectively. As our representation maintains only a closed surface in two-dimensional (2D) space, instead of the entire volume in three-dimensional (3D) space, it significantly reduces memory consumption. Then, based on this 2D representation, we propose a method to determine the occupancy state of arbitrary locations in the 3D environment. We term this method as boundary map. Besides, we design a novel data structure for maintaining the boundary map, supporting efficient occupancy state queries. Theoretical analyses of the occupancy state query algorithm are also provided. Furthermore, to enable efficient construction and updates of the boundary map from the real-time sensor measurements, we propose a global-local mapping framework and corresponding update algorithms. Finally, we will make our implementation of the boundary map open-source on GitHub to benefit the community:https://github.com/hku-mars/BDM.

cs.RO↗

DiffAero: A GPU-Accelerated Differentiable Simulation Framework for Efficient Quadrotor Policy Learning

This letter introduces DiffAero, a lightweight, GPU-accelerated, and fully differentiable simulation framework designed for efficient quadrotor control policy learning. DiffAero supports both environment-level and agent-level parallelism and integrates multiple dynamics models, customizable sensor stacks (IMU, depth camera, and LiDAR), and diverse flight tasks within a unified, GPU-native training interface. By fully parallelizing both physics and rendering on the GPU, DiffAero eliminates CPU-GPU data transfer bottlenecks and delivers orders-of-magnitude improvements in simulation throughput. In contrast to existing simulators, DiffAero not only provides high-performance simulation but also serves as a research platform for exploring differentiable and hybrid learning algorithms. Extensive benchmarks and real-world flight experiments demonstrate that DiffAero and hybrid learning algorithms combined can learn robust flight policies in hours on consumer-grade hardware. The code is available at https://github.com/flyingbitac/diffaero.

cs.RO↗

A Survey on LiDAR-based Autonomous Aerial Vehicles

This survey offers a comprehensive overview of recent advancements in LiDAR-based autonomous Unmanned Aerial Vehicles (UAVs), covering their design, perception, planning, and control strategies. Over the past decade, LiDAR technology has become a crucial enabler for high-speed, agile, and reliable UAV navigation, especially in GPS-denied environments. The paper begins by examining the evolution of LiDAR sensors, emphasizing their unique advantages such as high accuracy, long-range depth measurements, and robust performance under various lighting conditions, making them particularly well-suited for UAV applications. The integration of LiDAR with UAVs has significantly enhanced their autonomy, enabling complex missions in diverse and challenging environments. Subsequently, we explore essential software components, including perception technologies for state estimation and mapping, as well as trajectory planning and control methodologies, and discuss their adoption in LiDAR-based UAVs. Additionally, we analyze various practical applications of the LiDAR-based UAVs, ranging from industrial operations to supporting different aerial platforms and UAV swarm deployments. The survey concludes by discussing existing challenges and proposing future research directions to advance LiDAR-based UAVs and enhance multi-UAV collaboration. By synthesizing recent developments, this paper aims to provide a valuable resource for researchers and practitioners working to push the boundaries of LiDAR-based UAV systems.

cs.RO↗

Flying through cluttered and dynamic environments with LiDAR

Navigating unmanned aerial vehicles (UAVs) through cluttered and dynamic environments remains a significant challenge, particularly when dealing with fast-moving or sudden-appearing obstacles. This paper introduces a complete LiDAR-based system designed to enable UAVs to avoid various moving obstacles in complex environments. Benefiting the high computational efficiency of perception and planning, the system can operate in real time using onboard computing resources with low latency. For dynamic environment perception, we have integrated our previous work, M-detector, into the system. M-detector ensures that moving objects of different sizes, colors, and types are reliably detected. For dynamic environment planning, we incorporate dynamic object predictions into the integrated planning and control (IPC) framework, namely DynIPC. This integration allows the UAV to utilize predictions about dynamic obstacles to effectively evade them. We validate our proposed system through both simulations and real-world experiments. In simulation tests, our system outperforms state-of-the-art baselines across several metrics, including success rate, time consumption, average flight time, and maximum velocity. In real-world trials, our system successfully navigates through forests, avoiding moving obstacles along its path.

cs.RO↗

Autonomous Tail-Sitter Flights in Unknown Environments

Trajectory generation for fully autonomous flights of tail-sitter unmanned aerial vehicles (UAVs) presents substantial challenges due to their highly nonlinear aerodynamics. In this paper, we introduce, to the best of our knowledge, the world's first fully autonomous tail-sitter UAV capable of high-speed navigation in unknown, cluttered environments. The UAV autonomy is enabled by cutting-edge technologies including LiDAR-based sensing, differential-flatness-based trajectory planning and control with purely onboard computation. In particular, we propose an optimization-based tail-sitter trajectory planning framework that generates high-speed, collision-free, and dynamically-feasible trajectories. To efficiently and reliably solve this nonlinear, constrained \textcolor{black}{problem}, we develop an efficient feasibility-assured solver, EFOPT, tailored for the online planning of tail-sitter UAVs. We conduct extensive simulation studies to benchmark EFOPT's superiority in planning tasks against conventional NLP solvers. We also demonstrate exhaustive experiments of aggressive autonomous flights with speeds up to 15m/s in various real-world environments, including indoor laboratories, underground parking lots, and outdoor parks. A video demonstration is available at https://youtu.be/OvqhlB2h3k8, and the EFOPT solver is open-sourced at https://github.com/hku-mars/EFOPT.

cs.RO↗

Swarm-LIO2: Decentralized, Efficient LiDAR-inertial Odometry for UAV Swarms

Aerial swarm systems possess immense potential in various aspects, such as cooperative exploration, target tracking, search and rescue. Efficient, accurate self and mutual state estimation are the critical preconditions for completing these swarm tasks, which remain challenging research topics. This paper proposes Swarm-LIO2: a fully decentralized, plug-and-play, computationally efficient, and bandwidth-efficient LiDAR-inertial odometry for aerial swarm systems. Swarm-LIO2 uses a decentralized, plug-and-play network as the communication infrastructure. Only bandwidth-efficient and low-dimensional information is exchanged, including identity, ego-state, mutual observation measurements, and global extrinsic transformations. To support the plug-and-play of new teammate participants, Swarm-LIO2 detects potential teammate UAVs and initializes the temporal offset and global extrinsic transformation all automatically. To enhance the initialization efficiency, novel reflectivity-based UAV detection, trajectory matching, and factor graph optimization methods are proposed. For state estimation, Swarm-LIO2 fuses LiDAR, IMU, and mutual observation measurements within an efficient ESIKF framework, with careful compensation of temporal delay and modeling of measurements to enhance the accuracy and consistency.

cs.RO↗

LiDAR-based Quadrotor for Slope Inspection in Dense Vegetation

This work presents a LiDAR-based quadrotor system for slope inspection in dense vegetation environments. Cities like Hong Kong are vulnerable to climate hazards, which often result in landslides. To mitigate the landslide risks, the Civil Engineering and Development Department (CEDD) has constructed steel flexible debris-resisting barriers on vulnerable natural catchments to protect residents. However, it is necessary to carry out regular inspections to identify any anomalies, which may affect the proper functioning of the barriers. Traditional manual inspection methods face challenges and high costs due to steep terrain and dense vegetation. Compared to manual inspection, unmanned aerial vehicles (UAVs) equipped with LiDAR sensors and cameras have advantages such as maneuverability in complex terrain, and access to narrow areas and high spots. However, conducting slope inspections using UAVs in dense vegetation poses significant challenges. First, in terms of hardware, the overall design of the UAV must carefully consider its maneuverability in narrow spaces, flight time, and the types of onboard sensors required for effective inspection. Second, regarding software, navigation algorithms need to be designed to enable obstacle avoidance flight in dense vegetation environments. To overcome these challenges, we develop a LiDAR-based quadrotor, accompanied by a comprehensive software system. The goal is to deploy our quadrotor in field environments to achieve efficient slope inspection. To assess the feasibility of our hardware and software system, we conduct functional tests in non-operational scenarios. Subsequently, invited by CEDD, we deploy our quadrotor in six field environments, including five flexible debris-resisting barriers located in dense vegetation and one slope that experienced a landslide. These experiments demonstrated the superiority of our quadrotor in slope inspection.

cs.RO↗

FAST-LIVO2: Fast, Direct LiDAR-Inertial-Visual Odometry

This paper proposes FAST-LIVO2: a fast, direct LiDAR-inertial-visual odometry framework to achieve accurate and robust state estimation in SLAM tasks and provide great potential in real-time, onboard robotic applications. FAST-LIVO2 fuses the IMU, LiDAR and image measurements efficiently through an ESIKF. To address the dimension mismatch between the heterogeneous LiDAR and image measurements, we use a sequential update strategy in the Kalman filter. To enhance the efficiency, we use direct methods for both the visual and LiDAR fusion, where the LiDAR module registers raw points without extracting edge or plane features and the visual module minimizes direct photometric errors without extracting ORB or FAST corner features. The fusion of both visual and LiDAR measurements is based on a single unified voxel map where the LiDAR module constructs the geometric structure for registering new LiDAR scans and the visual module attaches image patches to the LiDAR points. To enhance the accuracy of image alignment, we use plane priors from the LiDAR points in the voxel map (and even refine the plane prior) and update the reference patch dynamically after new images are aligned. Furthermore, to enhance the robustness of image alignment, FAST-LIVO2 employs an on-demanding raycast operation and estimates the image exposure time in real time. Lastly, we detail three applications of FAST-LIVO2: UAV onboard navigation demonstrating the system's computation efficiency for real-time onboard navigation, airborne mapping showcasing the system's mapping accuracy, and 3D model rendering (mesh-based and NeRF-based) underscoring the suitability of our reconstructed dense map for subsequent rendering tasks. We open source our code, dataset and application on GitHub to benefit the robotics community.

cs.RO↗