arXiv subjects

Yunjie Yang

Publications and source records attributed to Yunjie Yang.

At least 19 recordsLinked to original sources

arXiv2026

A virtual-variable-length method for robust inverse kinematics of multi-segment continuum robots

This paper proposes a new, robust method to solve the inverse kinematics (IK) of multi-segment continuum manipulators. Conventional Jacobian-based solvers, especially when initialized from neutral/rest configurations, often exhibit slow convergence and, in certain conditions, may fail to converge (deadlock). The Virtual-Variable-Length (VVL) method proposed here introduces fictitious variations of segments' length during the solution iteration, conferring virtual axial degrees of freedom that alleviate adverse behaviors and constraints, thus enabling or accelerating convergence. Comprehensive numerical experiments were conducted to compare the VVL method against benchmark Jacobian-based and Damped Least Square IK solvers. Across more than $1.8\times 10^6$ randomized trials covering manipulators with two to seven segments, the proposed approach achieved up to a 20$\%$ increase in convergence success rate over the benchmark and a 40-80$\%$ reduction in average iteration count under equivalent accuracy thresholds ($10^{-4}-10^{-8}$). While deadlocks are not restricted to workspace boundaries and may occur at arbitrary poses, our empirical study identifies boundary-proximal configurations as a frequent cause of failed convergence and the VVL method mitigates such occurrences over a statistical sample of test cases.

cs.RO↗

arXiv2026

Gust Estimation and Rejection with a Disturbance Observer for Proprioceptive Underwater Soft Morphing Wings

Unmanned underwater vehicles are increasingly employed for maintenance and surveying tasks at sea, but their operation in shallow waters is often hindered by hydrodynamic disturbances such as waves, currents, and turbulence. These unsteady flows can induce rapid changes in direction and speed, compromising vehicle stability and manoeuvrability. Marine organisms contend with such conditions by combining proprioceptive feedback with flexible fins and tails to reject disturbances. Inspired by this strategy, we propose soft morphing wings endowed with proprioceptive sensing to mitigate environmental perturbations. The wing's continuous deformation provides a natural means to infer dynamic disturbances: sudden changes in camber directly reflect variations in the oncoming flow. By interpreting this proprioceptive signal, a disturbance observer can reconstruct flow parameters in real time. To enable this, we develop and experimentally validate a dynamic model of a hydraulically actuated soft wing with controllable camber. We then show that curvature-based sensing allows accurate estimation of disturbances in the angle of attack. Finally, we demonstrate that a controller leveraging these proprioceptive estimates can reject disturbances in the lift response of the soft wing. By combining proprioceptive sensing with a disturbance observer, this technique mirrors biological strategies and provides a pathway for soft underwater vehicles to maintain stability in hazardous environments.

cs.RO↗

arXiv2025

Dynamic PET Image Prediction Using a Network Combining Reversible and Irreversible Modules

Dynamic positron emission tomography (PET) images can reveal the distribution of tracers in the organism and the dynamic processes involved in biochemical reactions, and it is widely used in clinical practice. Despite the high effectiveness of dynamic PET imaging in studying the kinetics and metabolic processes of radiotracers. Pro-longed scan times can cause discomfort for both patients and medical personnel. This study proposes a dynamic frame prediction method for dynamic PET imaging, reduc-ing dynamic PET scanning time by applying a multi-module deep learning framework composed of reversible and irreversible modules. The network can predict kinetic parameter images based on the early frames of dynamic PET images, and then generate complete dynamic PET images. In validation experiments with simulated data, our network demonstrated good predictive performance for kinetic parameters and was able to reconstruct high-quality dynamic PET images. Additionally, in clinical data experiments, the network exhibited good generalization performance and attached that the proposed method has promising clinical application prospects.

eess.IV↗

arXiv2025

Efficient Tactile Perception with Soft Electrical Impedance Tomography and Pre-trained Transformer

Tactile sensing is fundamental to robotic systems, enabling interactions through physical contact in multiple tasks. Despite its importance, achieving high-resolution, large-area tactile sensing remains challenging. Electrical Impedance Tomography (EIT) has emerged as a promising approach for large-area, distributed tactile sensing with minimal electrode requirements which can lend itself to addressing complex contact problems in robotics. However, existing EIT-based tactile reconstruction methods often suffer from high computational costs or depend on extensive annotated simulation datasets, hindering its viability in real-world settings. To address this shortcoming, here we propose a Pre-trained Transformer for EIT-based Tactile Reconstruction (PTET), a learning-based framework that bridges the simulation-to-reality gap by leveraging self-supervised pretraining on simulation data and fine-tuning with limited real-world data. In simulations, PTET requires 99.44 percent fewer annotated samples than equivalent state-of-the-art approaches (2,500 vs. 450,000 samples) while achieving reconstruction performance improvements of up to 43.57 percent under identical data conditions. Fine-tuning with real-world data further enables PTET to overcome discrepancies between simulated and experimental datasets, achieving superior reconstruction and detail recovery in practical scenarios. The improved reconstruction accuracy, data efficiency, and robustness in real-world tasks establish it as a scalable and practical solution for tactile sensing systems in robotics, especially for object handling and adaptive grasping under varying pressure conditions.

cs.RO↗

arXiv2025

Computing forward statics from tendon-length in flexible-joint hyper-redundant manipulators

Hyper-redundant tendon-driven manipulators offer greater flexibility and compliance over traditional manipulators. A common way of controlling such manipulators relies on adjusting tendon lengths, which is an accessible control parameter. This approach works well when the kinematic configuration is representative of the real operational conditions. However, when dealing with manipulators of larger size subject to gravity, it becomes necessary to solve a static force problem, using tendon force as the input and employing a mapping from the configuration space to retrieve tendon length. Alternatively, measurements of the manipulator posture can be used to iteratively adjust tendon lengths to achieve a desired posture. Hence, either tension measurement or state estimation of the manipulator are required, both of which are not always accurately available. Here, we propose a solution by reconciling cables tension and length as the input for the solution of the system forward statics. We develop a screw-based formulation for a tendon-driven, multi-segment, hyper-redundant manipulator with elastic joints and introduce a forward statics iterative solution method that equivalently makes use of either tendon length or tension as the input. This strategy is experimentally validated using a traditional tension input first, subsequently showing the efficacy of the method when exclusively tendon lengths are used. The results confirm the possibility to perform open-loop control in static conditions using a kinematic input only, thus bypassing some of the practical problems with tension measurement and state estimation of hyper-redundant systems.

cs.RO↗

arXiv2025

Optimized Lattice-Structured Flexible EIT Sensor for Tactile Reconstruction and Classification

Flexible electrical impedance tomography (EIT) offers a promising alternative to traditional tactile sensing approaches, enabling low-cost, scalable, and deformable sensor designs. Here, we propose an optimized lattice-structured flexible EIT tactile sensor incorporating a hydrogel-based conductive layer, systematically designed through three-dimensional coupling field simulations to optimize structural parameters for enhanced sensitivity and robustness. By tuning the lattice channel width and conductive layer thickness, we achieve significant improvements in tactile reconstruction quality and classification performance. Experimental results demonstrate high-quality tactile reconstruction with correlation coefficients up to 0.9275, peak signal-to-noise ratios reaching 29.0303 dB, and structural similarity indexes up to 0.9660, while maintaining low relative errors down to 0.3798. Furthermore, the optimized sensor accurately classifies 12 distinct tactile stimuli with an accuracy reaching 99.6%. These results highlight the potential of simulation-guided structural optimization for advancing flexible EIT-based tactile sensors toward practical applications in wearable systems, robotics, and human-machine interfaces.

cs.RO↗

arXiv2025

QuantEIT: Ultra-Lightweight Quantum-Assisted Inference for Chest Electrical Impedance Tomography

Electrical Impedance Tomography (EIT) is a non-invasive, low-cost bedside imaging modality with high temporal resolution, making it suitable for bedside monitoring. However, its inherently ill-posed inverse problem poses significant challenges for accurate image reconstruction. Deep learning (DL)-based approaches have shown promise but often rely on complex network architectures with a large number of parameters, limiting efficiency and scalability. Here, we propose an Ultra-Lightweight Quantum-Assisted Inference (QuantEIT) framework for EIT image reconstruction. QuantEIT leverages a Quantum-Assisted Network (QA-Net), combining parallel 2-qubit quantum circuits to generate expressive latent representations that serve as implicit nonlinear priors, followed by a single linear layer for conductivity reconstruction. This design drastically reduces model complexity and parameter number. Uniquely, QuantEIT operates in an unsupervised, training-data-free manner and represents the first integration of quantum circuits into EIT image reconstruction. Extensive experiments on simulated and real-world 2D and 3D EIT lung imaging data demonstrate that QuantEIT outperforms conventional methods, achieving comparable or superior reconstruction accuracy using only 0.2% of the parameters, with enhanced robustness to noise.

cs.CV↗

arXiv2025

D2IP: Deep Dynamic Image Prior for 3D Time-sequence Pulmonary Impedance Imaging

Unsupervised learning methods, such as Deep Image Prior (DIP), have shown great potential in tomographic imaging due to their training-data-free nature and high generalization capability. However, their reliance on numerous network parameter iterations results in high computational costs, limiting their practical application, particularly in complex 3D or time-sequence tomographic imaging tasks. To overcome these challenges, we propose Deep Dynamic Image Prior (D2IP), a novel framework for 3D time-sequence imaging. D2IP introduces three key strategies - Unsupervised Parameter Warm-Start (UPWS), Temporal Parameter Propagation (TPP), and a customized lightweight reconstruction backbone, 3D-FastResUNet - to accelerate convergence, enforce temporal coherence, and improve computational efficiency. Experimental results on both simulated and clinical pulmonary datasets demonstrate that D2IP enables fast and accurate 3D time-sequence Electrical Impedance Tomography (tsEIT) reconstruction. Compared to state-of-the-art baselines, D2IP delivers superior image quality, with a 24.8% increase in average MSSIM and an 8.1% reduction in ERR, alongside significantly reduced computational time (7.1x faster), highlighting its promise for clinical dynamic pulmonary imaging.

eess.IV↗

arXiv2025

Modular Soft Wearable Glove for Real-Time Gesture Recognition and Dynamic 3D Shape Reconstruction

With the increasing demand for human-computer interaction (HCI), flexible wearable gloves have emerged as a promising solution in virtual reality, medical rehabilitation, and industrial automation. However, the current technology still has problems like insufficient sensitivity and limited durability, which hinder its wide application. This paper presents a highly sensitive, modular, and flexible capacitive sensor based on line-shaped electrodes and liquid metal (EGaIn), integrated into a sensor module tailored to the human hand's anatomy. The proposed system independently captures bending information from each finger joint, while additional measurements between adjacent fingers enable the recording of subtle variations in inter-finger spacing. This design enables accurate gesture recognition and dynamic hand morphological reconstruction of complex movements using point clouds. Experimental results demonstrate that our classifier based on Convolution Neural Network (CNN) and Multilayer Perceptron (MLP) achieves an accuracy of 99.15% across 30 gestures. Meanwhile, a transformer-based Deep Neural Network (DNN) accurately reconstructs dynamic hand shapes with an Average Distance (AD) of 2.076\pm3.231 mm, with the reconstruction accuracy at individual key points surpassing SOTA benchmarks by 9.7% to 64.9%. The proposed glove shows excellent accuracy, robustness and scalability in gesture recognition and hand reconstruction, making it a promising solution for next-generation HCI systems.

cs.RO↗

arXiv2025

Physics-informed generative real-time lens-free imaging

Advancements in high-throughput biomedical applications require real-time, large field-of-view (FOV) imaging. While current 2D lens-free imaging (LFI) systems improve FOV, they are often hindered by time-consuming multi-position measurements, extensive data pre-processing, and strict optical parameterization, limiting their application to static, thin samples. To overcome these limitations, we introduce GenLFI, combining a generative unsupervised physics-informed neural network (PINN) with a large FOV LFI setup for straightforward holographic image reconstruction, without multi-measurement. GenLFI enables real-time 2D imaging for 3D samples, such as droplet-based microfluidics and 3D cell models, in dynamic complex optical fields. Unlike previous methods, our approach decouples the reconstruction algorithm from optical setup parameters, enabling a large FOV limited only by hardware. We demonstrate a real-time FOV exceeding 550 mm$^2$, over 20 times larger than current real-time LFI systems. This framework unlocks the potential of LFI systems, providing a robust tool for advancing automated high-throughput biomedical applications.

physics.optics↗

arXiv2025

Learning-enhanced electronic skin for tactile sensing on deformable surface based on electrical impedance tomography

Electrical Impedance Tomography (EIT)-based tactile sensors offer cost-effective and scalable solutions for robotic sensing, especially promising for soft robots. However a major issue of EIT-based tactile sensors when applied in highly deformable objects is their performance degradation due to surface deformations. This limitation stems from their inherent sensitivity to strain, which is particularly exacerbated in soft bodies, thus requiring dedicated data interpretation to disentangle the parameter being measured and the signal deriving from shape changes. This has largely limited their practical implementations. This paper presents a machine learning-assisted tactile sensing approach to address this challenge by tracking surface deformations and segregating this contribution in the signal readout during tactile sensing. We first capture the deformations of the target object, followed by tactile reconstruction using a deep learning model specifically designed to process and fuse EIT data and deformation information. Validations using numerical simulations achieved high correlation coefficients (0.9660 - 0.9999), peak signal-to-noise ratios (28.7221 - 55.5264 dB) and low relative image errors (0.0107 - 0.0805). Experimental validations, using a hydrogel-based EIT e-skin under various deformation scenarios, further demonstrated the effectiveness of the proposed approach in real-world settings. The findings could underpin enhanced tactile interaction in soft and highly deformable robotic applications.

cs.RO↗

arXiv2025

Data-efficient Tactile Sensing with Electrical Impedance Tomography

Electrical Impedance Tomography (EIT)-inspired tactile sensors are gaining attention in robotic tactile sensing due to their cost-effectiveness, safety, and scalability with sparse electrode configurations. This paper presents a data augmentation strategy for learning-based tactile reconstruction that amplifies the original single-frame signal measurement into 32 distinct, effective signal data for training. This approach supplements uncollected conditions of position information, resulting in more accurate and high-resolution tactile reconstructions. Data augmentation for EIT significantly reduces the required EIT measurements and achieves promising performance with even limited samples. Simulation results show that the proposed method improves the correlation coefficient by over 12% and reduces the relative error by over 21% under various noise levels. Furthermore, we demonstrate that a standard deep neural network (DNN) utilizing the proposed data augmentation reduces the required data down to 1/31 while achieving a similar tactile reconstruction quality. Real-world tests further validate the approach's effectiveness on a flexible EIT-based tactile sensor. These results could help address the challenge of training tactile sensing networks with limited available measurements, improving the accuracy and applicability of EIT-based tactile sensing systems.

cs.RO↗

arXiv2025

Semi-Supervised Medical Image Segmentation via Knowledge Mining from Large Models

Large-scale vision models like SAM have extensive visual knowledge, yet their general nature and computational demands limit their use in specialized tasks like medical image segmentation. In contrast, task-specific models such as U-Net++ often underperform due to sparse labeled data. This study introduces a strategic knowledge mining method that leverages SAM's broad understanding to boost the performance of small, locally hosted deep learning models. In our approach, we trained a U-Net++ model on a limited labeled dataset and extend its capabilities by converting SAM's output infered on unlabeled images into prompts. This process not only harnesses SAM's generalized visual knowledge but also iteratively improves SAM's prediction to cater specialized medical segmentation tasks via U-Net++. The mined knowledge, serving as "pseudo labels", enriches the training dataset, enabling the fine-tuning of the local network. Applied to the Kvasir SEG and COVID-QU-Ex datasets which consist of gastrointestinal polyp and lung X-ray images respectively, our proposed method consistently enhanced the segmentation performance on Dice by 3% and 1% respectively over the baseline U-Net++ model, when the same amount of labelled data were used during training (75% and 50% of labelled data). Remarkably, our proposed method surpassed the baseline U-Net++ model even when the latter was trained exclusively on labeled data (100% of labelled data). These results underscore the potential of knowledge mining to overcome data limitations in specialized models by leveraging the broad, albeit general, knowledge of large-scale models like SAM, all while maintaining operational efficiency essential for clinical applications.

eess.IV↗

arXiv2024

Flexible electrical impedance tomography for tactile interfaces

Flexible electrical impedance tomography (EIT) is an emerging technology for tactile sensing in human-machine interfaces (HMI). It offers a unique alternative to traditional array-based tactile sensors with its flexible, scalable, and cost-effective one-piece design. This paper proposes a lattice-patterned flexible EIT tactile sensor with a hydrogel-based conductive layer, designed for enhanced sensitivity while maintaining durability. We conducted simulation studies to explore the influence of lattice width and conductive layer thickness on sensor performance, establishing optimized sensor design parameters for enhanced functionality. Experimental evaluations demonstrate the sensor's capacity to detect diverse tactile patterns with a high accuracy. The practical utility of the sensor is demonstrated through its integration within an HMI setup to control a virtual game, showcasing its potential for dynamic, multi-functional tactile interactions in real-time applications. This study reinforces the potential of EIT-based flexible tactile sensors, establishing a foundation for future advancements in wearable, adaptable HMI technologies.

cs.RO↗

arXiv2024

Multi-frequency Electrical Impedance Tomography Reconstruction with Multi-Branch Attention Image Prior

Multi-frequency Electrical Impedance Tomography (mfEIT) is a promising biomedical imaging technique that estimates tissue conductivities across different frequencies. Current state-of-the-art (SOTA) algorithms, which rely on supervised learning and Multiple Measurement Vectors (MMV), require extensive training data, making them time-consuming, costly, and less practical for widespread applications. Moreover, the dependency on training data in supervised MMV methods can introduce erroneous conductivity contrasts across frequencies, posing significant concerns in biomedical applications. To address these challenges, we propose a novel unsupervised learning approach based on Multi-Branch Attention Image Prior (MAIP) for mfEIT reconstruction. Our method employs a carefully designed Multi-Branch Attention Network (MBA-Net) to represent multiple frequency-dependent conductivity images and simultaneously reconstructs mfEIT images by iteratively updating its parameters. By leveraging the implicit regularization capability of the MBA-Net, our algorithm can capture significant inter- and intra-frequency correlations, enabling robust mfEIT reconstruction without the need for training data. Through simulation and real-world experiments, our approach demonstrates performance comparable to, or better than, SOTA algorithms while exhibiting superior generalization capability. These results suggest that the MAIP-based method can be used to improve the reliability and applicability of mfEIT in various settings.

eess.IV↗

arXiv2024

Closed-loop underwater soft robotic foil shape control using flexible e-skin

The use of soft robotics for real-world underwater applications is limited, even more than in terrestrial applications, by the ability to accurately measure and control the deformation of the soft materials in real time without the need for feedback from an external sensor. Real-time underwater shape estimation would allow for accurate closed-loop control of soft propulsors, enabling high-performance swimming and manoeuvring. We propose and demonstrate a method for closed-loop underwater soft robotic foil control based on a flexible capacitive e-skin and machine learning which does not necessitate feedback from an external sensor. The underwater e-skin is applied to a highly flexible foil undergoing deformations from 2% to 9% of its camber by means of soft hydraulic actuators. Accurate set point regulation of the camber is successfully tracked during sinusoidal and triangle actuation routines with an amplitude of 5% peak-to-peak and 10-second period with a normalised RMS error of 0.11, and 2% peak-to-peak amplitude with a period of 5 seconds with a normalised RMS error of 0.03. The tail tip deflection can be measured across a 30 mm (0.15 chords) range. These results pave the way for using e-skin technology for underwater soft robotic closed-loop control applications.

cs.RO↗

arXiv2023

Digital twin-assisted three-dimensional electrical capacitance tomography for multiphase flow imaging

Three-dimensional electrical capacitance tomography (3D-ECT) has shown promise for visualizing industrial multiphase flows. However, existing 3D-ECT approaches suffer from limited imaging resolution and lack assessment metrics, hampering their effectiveness in quantitative multiphase flow imaging. This paper presents a digital twin (DT)-assisted 3D-ECT, aiming to overcome these limitations and enhance our understanding of multiphase flow dynamics. The DT framework incorporates a 3D fluid-electrostatic field coupling model (3D-FECM) that digitally represents the physical 3D-ECT system, which enables us to simulate real multiphase flows and generate a comprehensive virtual multiphase flow 3D imaging dataset. Additionally, the framework includes a deep neural network named 3D deep back projection (3D-DBP), which learns multiphase flow features from the virtual dataset and enables more accurate 3D flow imaging in the real world. The DT-assisted 3D-ECT was validated through virtual and physical experiments, demonstrating superior image quality, noise robustness and computational efficiency compared to conventional 3D-ECT approaches. This research contributes to developing accurate and reliable 3D-ECT techniques and their implementation in multiphase flow systems across various industries.

eess.IV↗

arXiv2023

Touch and deformation perception of soft manipulators with capacitive e-skins and deep learning

Tactile sensing in soft robots remains particularly challenging because of the coupling between contact and deformation information which the sensor is subject to during actuation and interaction with the environment. This often results in severe interference and makes disentangling tactile sensing and geometric deformation difficult. To address this problem, this paper proposes a soft capacitive e-skin with a sparse electrode distribution and deep learning for information decoupling. Our approach successfully separates tactile sensing from geometric deformation, enabling touch recognition on a soft pneumatic actuator subject to both internal (actuation) and external (manual handling) forces. Using a multi-layer perceptron, the proposed e-skin achieves 99.88\% accuracy in touch recognition across a range of deformations. When complemented with prior knowledge, a transformer-based architecture effectively tracks the deformation of the soft actuator. The average distance error in positional reconstruction of the manipulator is as low as 2.905$\pm$2.207 mm, even under operative conditions with different inflation states and physical contacts which lead to additional signal variations and consequently interfere with deformation tracking. These findings represent a tangible way forward in the development of e-skins that can endow soft robots with proprioception and exteroception.

cs.RO↗