Germanium-tin (GeSn) avalanche photodiode with up to 2.7 micro cutoff wavelength for extended SWIR detection
Separate absorption charge multiplication germanium tin on silicon avalanche photodiode offers a viable solution to achieve CMOS compatible, high sensitivity detection technology in SWIR or extended SWIR range, leveraging the excellent k-factor of Si as multiplication layer and SWIR or e-SWIR band absorption of GeSn. However, unlike well-established growth of GeSn on Si with thick Ge buffer in-between to reduce threading dislocation density due to lattice mismatch, GeSn on Si APD design requires relatively thin Ge buffer to limit electric field drop through the background p-doped buffer and efficiently transporting photocarrier from GeSn absorber to Si multiplication layer, therefore making growth of high Sn content APD for e-SWIR coverage very challenging. In this work, we experimentally demonstrate GeSn on Si APD up to 12.7 percent Sn, monolithically grown on Si substrate with 122-nm-thick Ge buffer in between, which is considerably thinner than widely used 700-900 nm thick Ge buffer. Stronger relaxation of GeSn absorber via thin Ge buffer favors Sn incorporation, leading to higher Sn content than the nominal target of 8 percent Sn. Device detection range is significantly improved compared to previous work - with cutoff wavelength increased up to 2.7 micro at 300 K, in parallel with high avalanche gain at 77 K up to 21 at 1.55 micro and up to 52 at 2 micro, and good responsivity in SWIR or e-SWIR range, up to 1.45 AW-1 at 1.55 micro and 0.66 AW-1 at 2 micro.