arXiv subjects

Yuntao Xu

Publications and source records attributed to Yuntao Xu.

17 recordsLinked to original sources

arXiv2025

Fast Recovery of Niobium-based Superconducting Resonators after Laser Illumination

Interfacing superconducting microwave resonators with optical systems enables sensitive photon detectors, quantum transducers, and related quantum technologies. Achieving high optical pulse repetition is crucial for maximizing the device throughput. However, light-induced deterioration, such as quasiparticle poisoning, pair-breaking-phonon generation, and elevated temperature, hinders the rapid recovery of superconducting circuits, limiting their ability to sustain high optical pulse repetition rates. Understanding these loss mechanisms and enabling fast circuit recovery are therefore critical. In this work, we investigate the impact of optical illumination on niobium nitride and niobium microwave resonators by immersing them in superfluid helium-4 and demonstrate a three-order-of-magnitude faster resonance recovery compared to vacuum. By analyzing transient resonance responses, we provide insights into light-induced dynamics in these superconductors, highlighting the advantages of niobium-based superconductors and superfluid helium for rapid circuit recovery in superconducting quantum systems integrated with optical fields.

quant-ph↗

arXiv2023

Photonic link from single flux quantum circuits to room temperature

Broadband, energy-efficient signal transfer between cryogenic and room-temperature environment has been a major bottleneck for superconducting quantum and classical logic circuits. Photonic links promise to overcome this challenge by offering simultaneous high bandwidth and low thermal load. However, the development of cryogenic electro-optic modulators -- a key component for photonic readout of electrical signals -- has been stifled by the stringent requirements of superconducting circuits. Rapid single flux quantum circuits (RSFQ), for example, operate with a tiny signal amplitude of only a few millivolts (mV), far below the volt-level signal used in conventional circuits. Here, we demonstrate the first direct optical readout of an RSFQ circuit without additional electrical amplification enabled by a novel superconducting electro-optic modulator (SEOM) featuring a record-low half-wave voltage Vπ of 42 mV on a 1 m-long SEOM. Leveraging the low ohmic loss of superconductors, we break the fundamental Vπ-bandwidth trade-off and demonstrate electro-optic bandwidth up to 17 GHz on a 0.2 m-long SEOM at cryogenic temperatures. Our work presents a viable solution toward high-bandwidth signal transfer between future large-scale superconducting circuits and room-temperature electronics.

quant-ph↗

arXiv2023

Light-Induced Microwave Noise in Superconducting Microwave-Optical Transducers

Microwave-to-optical transducers are integral to the future of superconducting quantum computing, as they would enable scaling and long-distance communication of superconducting quantum processors through optical fiber links. However, optically-induced microwave noise poses a significant challenge in achieving quantum transduction between microwave and optical frequencies. In this work, we study light-induced microwave noise in an integrated electro-optical transducer harnessing Pockels effect of thin film lithium niobate. We reveal three sources of added noise with distinctive time constants ranging from sub-100 nanoseconds to milliseconds. Our results gain insights into the mechanisms and corresponding mitigation strategies for light-induced microwave noise in superconducting microwave-optical transducers, and pave the way towards realizing the ultimate goal of quantum transduction.

quant-ph↗

arXiv2022

Light-induced dynamic frequency shifting of microwave photons in a superconducting electro-optic converter

Hybrid superconducting-photonic microresonators are a promising platform for realizing microwave-to-optical transduction. However, the absorption of scattered photons by the superconductors leads to unintended microwave resonance frequency variation and linewidth broadening. Here, we experimentally study the dynamics of this effect and its impact on microwave-to-optics conversion in an integrated lithium niobate-superconductor hybrid resonator platform. We unveiled an adiabatic frequency shifting of the intracavity microwave photons induced by the fast photo-responses of the thin-film superconducting resonator. As a result, the temporal and spectral responses of electro-optics transduction are modified and well described by our theoretical model. This work provides important insights on the light-induced conversion dynamics which must be considered in future designs of hybrid superconducting-photonic system.

physics.app-ph↗

arXiv2022

Superconducting cavity piezo-electromechanics: the realization of an acoustic frequency comb at microwave frequencies

We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we further demonstrate a coherent electroacoustic frequency comb and provide theoretical understanding of multimode nonlinear interaction in the superstrong coupling limit. This nonlinear superconducting electroacoustic system sheds light on the active control of multimode resonator systems and offers an enabling platform for the dynamic study of microcombs at microwave frequencies.

physics.app-ph↗

arXiv2022

SmartCut Er:LiNbO3 with high optical coherence enabling optical thickness control

Integrated photonics capable of incorporating rare earth ions with high optical coherence is desirable for realizing efficient quantum transducers, compact quantum memories, and hybrid quantum systems. Here we describe a photonic platform based on the SmartCut erbium-doped lithium niobate thin film, and explore its stable optical transitions at telecom wavelength in a dilution refrigerator. Optical coherence time of up to 180\,$μ$s, rivaling the value of bulk crystals, is achieved in optical ridge waveguides and ring resonators. With this integrated platform, we demonstrate tunable light-ion interaction and flexible control of optical thickness by exploiting long waveguides, whose lengths are in principle variable. This unique ability to obtain high optical density using a low concentration ions further leads to the observation of multi-echo pulse trains in centimeter-long waveguides. Our results establish a promising photonic platform for quantum information processing with rare earth ions.

physics.optics↗

arXiv2021

Bidirectional electro-optic conversion reaching 1% efficiency with thin-film lithium niobate

Superconducting cavity electro-optics (EO) presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance through an optical network. High EO conversion efficiency demands transduction materials with strong Pockels effect and excellent optical transparency. Thin-film Lithium Niobate (TFLN) offers these desired characteristics however so far has only delivered unidirectional conversion with efficiencies on the order of $10^{-5}$, largely impacted by its prominent photorefractive (PR) effect at cryogenic temperatures. Here we show that, by mitigating the PR effect and associated charge-screening effect, the device's conversion efficiency can be enhanced by orders of magnitude while maintaining stable cryogenic operation, thus allowing a demonstration of conversion bidirectionality and accurate quantification of on-chip efficiency. With the optimized monolithic integrated superconducting EO device based on TFLN-on-sapphire substrate, an on-chip conversion efficiency of 1.02% (internal efficiency, 15.2%) is realized. Our demonstration indicates that with further device improvement, it is feasible for TFLN to approach unitary internal conversion efficiency.

physics.optics↗

arXiv2020

Mitigating photorefractive effect in thin-filmlithium niobate microring resonators

Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-films. In this paper, we show that the dielectric cladding on lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive effect in lithium niobate ring resonators can be effectively mitigated. Our work presents a reliable approach to control the photorefractive effect on thin-film lithium niobate and will further advance the performance of integrated classical and quantum photonic devices based on thin-film lithium niobate.

physics.optics↗

arXiv2020

Photorefraction-induced Bragg scattering in cryogenic lithium niobate ring resonators

We report intracavity Bragg scattering induced by photorefractive (PR) effect in high-Q lithium niobate (LN) ring resonators at cryogenic temperatures. We show that, when a cavity mode is strongly excited, the PR effect imprints a long-lived periodic space-charge field. This residual field in turn creates a refractive index modulation pattern that dramatically enhances the back scattering of an incoming probe light, and results in selective and reconfigurable mode splittings. This PR-induced Bragg scattering effect, despite being undesired for many applications, could be utilized to enable optically programmable photonic components.

physics.optics↗

arXiv2020

Stable tuning of photorefractive micro-cavities using an auxiliary laser

Cavity nonlinear optics enables intriguing physical phenomena to occur at micro- or nano-scales with modest input powers. While this enhances capabilities in applications such as comb generation, frequency conversion and quantum optics, undesired nonlinear effects including photorefraction and thermal bistability are exacerbated. In this letter, we propose and demonstrate a highly effective method of achieving cavity stabilization using an auxiliary laser for controlling photorefraction in a z-cut periodically poled lithium niobate (LN) microcavity system. Our numerical study accurately models the photorefractive effect under high input powers, guiding future analyses and development of LN microcavity systems.

physics.optics↗

arXiv2020

Ground-state Pulsed Cavity Electro-optics for Microwave-to-optical Conversion

In the development of quantum microwave-to-optical (MO) converters, excessive noise induced by the parametric optical drive remains a major challenge at milli-Kelvin temperatures. Here we study the extraneous noise added to an electro-optic transducer in its quantum ground state under an intense pulsed optical excitation. The integrated electro-optical transducer leverages the inherent Pockels effect of aluminum nitride microrings, flip-chip bonded to a superconducting resonator. Applying a pulsed optical drive with peak power exceeding the cooling power of the dilution refrigerator at its base temperature, we observe efficient bi-directional MO conversion, with near-ground state microwave thermal excitation ($\bar{n}_\mathrm{e}=0.09\pm0.06$). Time evolution study reveals that the residual thermal excitation is dominated by the superconductor absorption of stray light scattered off the chip-fiber interface. Our results shed light on suppressing microwave noise in a cavity electro-optic system under intense optical drive, which is an essential step towards quantum state transduction between microwave and optical frequencies.

quant-ph↗

arXiv2020

Photonic dissipation control for Kerr soliton generation in strongly Raman-active media

Microcavity solitons enable miniaturized coherent frequency comb sources. However, the formation of microcavity solitons can be disrupted by stimulated Raman scattering (SRS), particularly in the emerging crystalline microcomb materials with high Raman gain. Here, we propose and implement dissipation control---tailoring the energy dissipation of selected cavity modes---to purposely raise/lower the threshold of Raman lasing in a strongly Raman-active lithium niobate microring resonator, and realize on-demand soliton mode-locking or Raman lasing. Numerical simulations are carried out to confirm our analyses and agree well with experiment results. Our work demonstrates an effective approach to address strong SRS for microcavity soliton generation.

physics.optics↗

arXiv2020

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface

Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10-GHz phonons are resonantly coupled with photons in a superconducting and a nanophotonic cavities at the same time. Benefited from the achieved large piezo-mechanical cooperativity ($C_\mathrm{em}\sim7$) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.

physics.optics↗

arXiv2019

Incorporation of erbium ions into thin-film lithium niobate integrated photonics

As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. Here, we investigate the optical properties at 1.5 micron wavelengths of rare-earth ions (Er$^{3+}$) implanted in thin-film lithium niobate waveguides and micro-ring resonators. Optical quality factors near a million after post annealing show that ion implantation damage can be successfully repaired. The transition linewidth and fluorescence lifetime of erbium ions are characterized, revealing values comparable to bulk-doped crystals. The ion-cavity coupling is observed through a Purcell enhanced fluorescence, from which a Purcell factor of ~3.8 is extracted. This platform is compatible with top-down lithography processes and leads to a scalable path for controlling spin-photon interfaces in photonic circuits.

physics.optics↗

arXiv2019

Periodically poled thin film lithium niobate microring resonators with a second-harmonic generation efficiency of 250,000%/W

Lithium niobate (LN), dubbed by many as the silicon of photonics, has recently risen to the forefront of chip-scale nonlinear optics research since its demonstration as an ultralow-loss integrated photonics platform. Due to its significant quadratic nonlinearity ($χ^{(2)}$), LN inspires many important applications such as second-harmonic generation (SHG), spontaneous parametric down-conversion, and optical parametric oscillation. Here, we demonstrate high-efficiency SHG in dual-resonant, periodically poled z-cut LN microrings, where quasi-phase matching is realized by field-assisted domain engineering. Meanwhile, dual-band operation is accessed by optimizing the coupling conditions in fundamental and second-harmonic bands via a single pulley waveguide. As a result, when pumping a periodically poled LN microring in the low power regime at around 1617nm, an on-chip SHG efficiency of 250,000%/W is achieved, a state-of-the-art value reported among current integrated photonics platforms. An absolute conversion efficiency of 15% is recorded with a low pump power of 115$μ$W in the waveguide. Such periodically poled LN microrings also present a versatile platform for other cavity-enhanced quasi-phase matched $χ^{(2)}$ nonlinear optical processes.

physics.optics↗

arXiv2019

Radiative cooling of a superconducting resonator

Cooling microwave resonators to near the quantum ground state, crucial for their operation in the quantum regime, is typically achieved by direct device refrigeration to a few tens of millikelvin. However, in quantum experiments that require high operation power such as microwave-to-optics quantum transduction, it is desirable to operate at higher temperatures with non-negligible environmental thermal excitations, where larger cooling power is available. In this Letter, we present a radiative cooling protocol to prepare a superconducting microwave mode near its quantum ground state in spite of warm environment temperatures for the resonator. In this proof-of-concept experiment, the mode occupancy of a 10-GHz superconducting resonator thermally anchored at 1.02~K is reduced to $0.44\pm0.05$ by radiatively coupling to a 70-mK cold load. This radiative cooling scheme allows high-operation-power microwave experiments to work in the quantum regime, and opens possibilities for routing microwave quantum states to elevated temperatures.

quant-ph↗

arXiv2018

High Quality Factor Surface Fabry-Perot Cavity of Acoustic Waves

Surface acoustic wave (SAW) resonators are critical components in wireless communications and many sensing applications. They have also recently emerged as subject of study in quantum acoustics at the single phonon level. Acoustic loss reduction and mode confinement are key performance factors in SAW resonators. Here we report the design and experimental realization of a high quality factor Fabry-Perot SAW resonators formed in between tapered phononic crystal mirrors patterned on a GaN-on-sapphire material platform . The fabricated SAW resonators are characterized by both electrical network analyzer and optical heterodyne vibrometer. We observed standing Rayleigh wave inside the cavity, with an intrinsic quality factor exceeding 13,000 at ambient conditions.

physics.app-ph↗