arXiv subjects

Yuqing Cui

Publications and source records attributed to Yuqing Cui.

6 recordsLinked to original sources

arXiv2026

Designing, Deployment and Field Testing of C2Stack for Networked Intelligent Software-Defined UAVs

Unmanned Aerial Vehicles (UAVs) are emerging as critical enablers of next-generation wireless networking and autonomous systems. Despite their potential, deploying and testing networked UAV systems in real-world environments remains challenging, largely due to the absence of well-developed, end-to-end, ready-to-use protocol stacks. To fill this gap, we present C2Stack, a configurable protocol stack and experimental framework designed for real-time control, evaluation, and optimization of UAV networks. C2Stack incorporates a modular control plane, referred to as the~C2Stack Network Operating System (CNOS), alongside a programmable data plane that exposes APIs for cross-layer algorithm development, digital twin integration, and autonomous swarm control. In this article, we share our experience with the deployment and testing of C2Stack. We implemented C2Stack on a custom UAV swarm platform that integrates multiprocessor system-on-chip (MPSoC) radios with Intel NUC computing modules, enabling interoperability with various RF front ends. Field trials were conducted in both netted environments and large-scale outdoor test ranges, focusing on two representative use cases: (i) network utility maximization through online reinforcement learning, and (ii) collaborative interference source localization. The experiments demonstrate the feasibility of real-time, data-driven optimization in dynamic aerial environments, while also revealing practical challenges in field deployments of networked UAV systems, including power constraints, sensing limitations, and deployment logistics. We have made C2Stack source code available to the community under the MIT License, with the goal of establishing it as a foundational framework for experimental research on intelligent networked aerial systems.

eess.SY↗

arXiv2026

StormWave: An Open-Source Portable SDR Platform for Over-the-Air Resilience Evaluation of Terrestrial and Aerial Communications

This paper presents \emph{StormWave}, an open-source, portable software-defined Radio Frequency (RF) interference generation and monitoring platform designed for realistic field-based evaluation of the resilience of wireless communication systems. StormWave enables seamless composition and runtime switching among a wide range of narrowband and wideband waveforms, while supporting multiple digital modulations, adaptive coding, and multi-radio orchestration with real-time spectrum visualization. We evaluate the effectiveness of StormWave through both outdoor ground and air-to-air (A2A) experiments. Ground experiments demonstrate clear waveform- and modulation-dependent interference effects under realistic propagation conditions, while A2A experiments reveal pronounced distance-dependent constellation distortion and access-symbol degradation under active interference. The StormWave source code will be released to the community, with the expectation that StormWave will be used as a flexible, extensible, and field-ready platform for systematically validating interference resilience of wireless systems under realistic operating conditions.

eess.SY↗

arXiv2026

Collection: UAV-Based Wireless Multi-modal Measurements from AERPAW Autonomous Data Mule (AADM) Challenge in Digital Twin and Real-World Environments

In this work, we present an unmanned aerial vehicle (UAV) wireless dataset collected as part of the AERPAW Autonomous Aerial Data Mule (AADM) challenge, organized by the NSF Aerial Experimentation and Research Platform for Advanced Wireless (AERPAW) project. The AADM challenge was the second competition in which an autonomous UAV acted as a data mule, where the UAV downloaded data from multiple base stations (BSs) in a dynamic wireless environment. Participating teams designed flight control and decision-making algorithms for choosing which BSs to communicate with and how to plan flight trajectories to maximize data download within a mission completion time. The competition was conducted in two stages: Stage 1 involved development and experimentation using a digital twin (DT) environment, and in Stage 2, the final test run was conducted on the outdoor testbed. The total score for each team was compiled from both stages. The resulting dataset includes link quality and data download measurements, both in DT and physical environments. Along with the USRP measurements used in the contest, the dataset also includes UAV telemetry, Keysight RF sensors position estimates, link quality measurements from LoRa receivers, and Fortem radar measurements. It supports reproducible research on autonomous UAV networking, multi-cell association and scheduling, air-to-ground propagation modeling, DT-to-real-world transfer learning, and integrated sensing and communication, which serves as a benchmark for future autonomous wireless experimentation.

cs.NI↗

arXiv2026

C-POD: An AWS Cloud Framework for Edge Pod Automation and Remote Wireless Testbed Sharing

This paper presents C-POD, a cloud-native framework that automates the deployment and management of edge pods for seamless remote access and sharing of wireless testbeds. C-POD leverages public cloud resources and edge pods to lower the barrier to over-the-air (OTA) experimentation, enabling researchers to share and access distributed testbeds without extensive local infrastructure. A supporting toolkit has been developed for C-POD to enable flexible and scalable experimental workflows, including containerized edge environments, persistent Secure Shell (SSH) tunnels, and stable graphical interfaces. We prototype and deploy C-POD on the Amazon Web Services (AWS) public cloud to demonstrate its key features, including cloud-assisted edge pod deployment automation, elastic computing resource management, and experiment observability, by integrating two wireless testbeds that focus on RF signal generation and 5G(B) communications, respectively.

eess.SP↗

arXiv2024

On the Effects of Modeling on the Sim-to-Real Transfer Gap in Twinning the POWDER Platform

Digital Twin (DT) technology is expected to play a pivotal role in NextG wireless systems. However, a key challenge remains in the evaluation of data-driven algorithms within DTs, particularly the transfer of learning from simulations to real-world environments. In this work, we investigate the sim-to-real gap in developing a digital twin for the NSF PAWR Platform, POWDER. We first develop a 3D model of the University of Utah campus, incorporating geographical measurements and all rooftop POWDER nodes. We then assess the accuracy of various path loss models used in training modeling and control policies, examining the impact of each model on sim-to-real link performance predictions. Finally, we discuss the lessons learned from model selection and simulation design, offering guidance for the implementation of DT-enabled wireless networks.

eess.SP↗

arXiv2022

Digital Twin-Enabled Domain Adaptation for Zero-Touch UAV Networks: Survey and Challenges

In existing wireless networks, the control programs have been designed manually and for certain predefined scenarios. This process is complicated and error-prone, and the resulting control programs are not resilient to disruptive changes. Data-driven control based on Artificial Intelligence and Machine Learning (AI/ML) has been envisioned as a key technique to automate the modeling, optimization and control of complex wireless systems. However, existing AI/ML techniques rely on sufficient well-labeled data and may suffer from slow convergence and poor generalizability. In this article, focusing on digital twin-assisted wireless unmanned aerial vehicle (UAV) systems, we provide a survey of emerging techniques that can enable fast-converging data-driven control of wireless systems with enhanced generalization capability to new environments. These include SLAM-based sensing and network softwarization for digital twin construction, robust reinforcement learning and system identification for domain adaptation, and testing facility sharing and federation. The corresponding research opportunities are also discussed.

cs.NI↗