arXiv subjects

Yuri Mishin

Publications and source records attributed to Yuri Mishin.

17 recordsLinked to original sources

arXiv2026

A phase field model with arbitrary misorientation dependence of grain boundary energy

Grain growth in polycrystals is often simulated using orientation-field models, which employ a field to represent the local orientation of the crystal lattice. These models can be challenging to represent a realistic misorientation dependence of grain boundary free energy. We prove that existing orientation-field models, in general, cannot reproduce a decrease in the grain boundary free energy with a increasing misorientation angle, demonstrating a significant limitation of previous models in applications to polycrystalline materials. To overcome this limitation, we propose a modification to the Kobayashi-Warren-Carter model for grain growth wherein the coefficients of the free-energy functional become functions of the misorientation between the grains, which is a non-local quantity. Due to this modification, an arbitrary dependence of the grain boundary free energy on the misorientation can be embedded in the model. We propose calculating the non-local misorientation by interpolating the orientation field at a fixed distance in both directions along the local grain boundary normal vector. The capabilities of the model are demonstrated by introduction of a sharp cusp to the misorientation dependent grain boundary free energy. Finally, we propose an extension of the model to three dimensions.

cond-mat.mtrl-sci↗

arXiv2026

The effect of normal stress on stacking fault energy in face-centered cubic metals

Plastic deformation and fracture of FCC metals involve the formation of stable or unstable stacking faults (SFs) on (111) plane. Examples include dislocation cross-slip and dislocation nucleation at interfaces and near crack tips. The stress component normal to (111) plane can strongly affect the SF energy when the stress magnitude reaches several to tens of GPa. We conduct a series of DFT calculations of SF energies in six FCC metals: Al, Ni, Cu, Ag, Au, and Pt. The results show that normal compression significantly increases the stable and unstable SF energies in all six metals, while normal tension decreases them. The SF formation is accompanied by inelastic expansion in the normal direction. The DFT calculations are compared with predictions of several representative classical and machine-learning interatomic potentials. Many potentials fail to capture the correct stress effect on the SF energy, often predicting trends opposite to the DFT calculations. Possible ways to improve the ability of potentials to represent the stress effect on SF energy are discussed.

cond-mat.mtrl-sci↗

arXiv2026

On a relationship between grain boundary free energy, grain boundary segregation, and grain boundary diffusion

We present a detailed analysis of the universal relationship between grain boundary (GB) free energy and GB self-diffusion coefficient derived by Borisov et al. (1964). This relationship was expressed by a simple equation that was used in many publications to predict GB energies on the basis of experimental diffusion data. Meanwhile, the physical assumptions and approximations underlying the Borisov model are poorly understood. As a result, the Borisov equation was often used outside its intended limits. Here, we re-derive the Borisov equation from ground up, identifying its underlying assumptions, correcting some errors and inconsistencies, and extending the original model to the case of impurity diffusion and diffusion by the interstitialcy and interstitial-dumbbell mechanisms. The meaning of the key assumption of the Borisov model, related to the free energy of the activated complex, is discussed, and ways to test this assumption are proposed.

cond-mat.mtrl-sci↗

arXiv2026

Self-pinning mechanism for grain boundary stabilization

Previous research focused on two different mechanisms of microstructure stabilization in alloys: thermodynamic stabilization by reducing the grain boundary (GB) free energy and kinetic stabilization by suppressing the GB mobility by solute drag or embedded pinning particles. Here, we propose a new GB stabilization mechanism, called self-pinning, in which the segregation atmosphere of a moving GB spontaneously breaks into solute-rich clusters, which produce a strong pinning effect in addition to the free energy reduction resulting from the segregation. The cluster formation is caused by strong solute-solute attraction at GBs, leading to a first-order transformation between solute-lean and solute-rich GB phases. The effect is demonstrated by kinetic Monte Carlo simulations capturing segregation thermodynamics, GB dynamics, and solute diffusion. The self-pinning provides an intrinsic stabilization mechanism for suppressing grain growth that couples thermodynamics and kinetics. The mechanism obviates the need for pre-existing second phase inclusions, refocusing the alloy design on GB phase behavior.

cond-mat.mtrl-sci↗

arXiv2025

Thermal Equilibrium Vacancy Concentration in an Alloy with Chemical Short-Range Order

The equilibrium vacancy concentration in multi-principal element alloys remains a controversial and nontrivial subject, primarily because of chemical complexity and chemical short-range order (CSRO). Here we derive an exact expression that is amenable to atomistic calculations, using multiple perspectives. We applied this expression to equiatomic CrCoNi alloys in the face-centered cubic structure. The derived equilibrium vacancy concentration is used in our recent work, which predicts the chemical short-range order formation timescale consistent with experimental observation. The results demonstrate the practical utility of the approach for predicting equilibrium vacancy concentrations in compositionally complex alloys.

cond-mat.mtrl-sci↗

arXiv2025

Line and Planar Defects with Zero Formation Free Energy: Applications of the Phase Rule toward Ripening-Immune Microstructures

Extended one- and two-dimensional defects in crystalline materials are usually metastable. The thermodynamic ground state of the material is presumed to be defect-free. Here, we investigate the conditions under which extended defects, such as grain boundaries, can exist in a multicomponent alloy when the latter reaches the thermodynamic ground state allowed by the Gibbs phase rule. We treat all extended defects as low-dimensional phases on the same footing as the conventional bulk phases. Thermodynamic analysis shows that, in the ground state, the formation free energies of all extended defects must be zero, and the system must follow a generalized phase rule. The latter predicts that only a finite number of symmetry-related defect types can coexist in the material in the ground state. Guided by the phase rule, we discuss finite-size polycrystalline and/or polyphase microstructures that are fully immune to coarsening and their possible transformations.

cond-mat.mtrl-sci↗

arXiv2025

A model of full thermodynamic stabilization of nanocrystalline alloys

We propose a model of a polycrystalline alloy combining the Potts model for grain orientations with a lattice-gas model for solute thermodynamics and diffusion. The alloy evolution with this model is implemented by kinetic Monte Carlo simulations with nonlinear transition barriers between microstates. The model is applied to investigate the long-standing question of whether grain boundary (GB) segregation of an appropriate solute can drive the GB free energy to zero, creating a fully stabilized polycrystalline state with a finite grain size. The model reproduces stable polycrystalline states under certain conditions, provided the solute-solute interactions are repulsive. The material's structure minimizing the total free energy is not static. It exists in a state of dynamic equilibrium between the competing processes of grain growth and grain refinement. The alloy eliminates triple junctions by forming a set of smaller grains embedded into a larger matrix grain. It is predicted that, if a fully stabilized nanocrystalline state is realized experimentally, it will look very different from the conventional (unstable) nanocrystalline materials.

cond-mat.mtrl-sci↗

arXiv2024

Atomistic modeling of the structure and diffusion processes at Al(110)/Si(001) interphase boundaries obtained by vapor deposition

We report on molecular dynamics simulations of the atomic structure and diffusion processes at Al(110)/Si(001) interphase boundary created by simulated vapor deposition of Al(Si) alloy onto Si(001) substrate. An array of parallel misfit dislocations of both full and partial types is observed at the interface. Si atoms segregate to the misfit dislocations, with segregation to full dislocations being stronger. The interface diffusion is dominated by short-circuit diffusion along the misfit dislocations, creating a significant diffusion anisotropy. Diffusion of Al and Si atoms along the full misfit dislocations is faster than along the partial misfit dislocations. Due to the presence of the misfit dislocations, diffusion at the Al(110)/Si(001) interface studied here is faster than diffusion at the Al(111)/Si(111) interfaces investigated in our previous work.

cond-mat.mtrl-sci↗

arXiv2024

Atomistic modeling of diffusion processes at Al(Si)/Si(111) interphase boundaries obtained by vapor deposition

Molecular dynamics and parallel-replica dynamics simulations are applied to investigate the atomic structures and diffusion processes at {\text{Al}\{111\}}\parallel{\text{Si}}\{111\} interphase boundaries constructed by simulated vapor deposition of Al(Si) alloy on Si(111) substrates. Different orientation relationships and interface structures are obtained for different pre-deposition Si (111) surface reconstructions. Diffusion of both Al and Si atoms at the interfaces is calculated and compared with diffusion along grain boundaries, triple junctions, contact lines, and threading dislocations in the Al-Si system. It is found that {\text{Al}\{111\}}\parallel{\text{Si}}\{111\} interphase boundaries exhibit the lowest diffusivity among these structures and are closest to the lattice diffusivity. In most cases (except for the Si substrate), Si atoms are more mobile than Al atoms. The diffusion processes are typically mediated by Al vacancies and Si interstitial atoms migrating by either direct or indirect interstitial mechanisms.

cond-mat.mtrl-sci↗

arXiv2024

A model of thermodynamic stabilization of nanocrystalline grain boundaries in alloy systems

Nanocrystalline (NC) materials are intrinsically unstable against grain growth. Significant research efforts have been dedicated to suppressing the grain growth by solute segregation, including the pursuit of a special NC structure that minimizes the total free energy and completely eliminates the driving force for grain growth. This fully stabilized state has been predicted theoretically and by simulations but is yet to be confirmed experimentally. To better understand the nature of the full stabilization, we propose a simple two-dimensional model capturing the coupled processes of grain boundary (GB) migration and solute diffusion. Kinetic Monte Carlo simulations based on this model reproduce the fully stabilized polycrystalline state and link it to the condition of zero GB free energy. The simulations demonstrate the emergence of a fully stabilized state by the divergence of capillary wave amplitudes on planar GBs and by fragmentation of a large grain into a stable ensemble of smaller grains. The role of solute diffusion in the full stabilization is examined. Possible extensions of the model are discussed.

cond-mat.mtrl-sci↗

arXiv2023

Atomistic modeling of metal-nonmetal interphase boundary diffusion

Atomistic computer simulations are applied to investigate the atomic structure, thermal stability, and diffusion processes in Al-Si interphase boundaries as a prototype of metal-ceramic interfaces in composite materials. Some of the most stable orientation relationships between the phases found in this work were previously observed in epitaxy experiments. A non-equilibrium interface can transform to a more stable state by a mechanism that we call interface-induced recrystallization. Diffusion of both Al and Si atoms in stable Al-Si interfaces is surprisingly slow compared with diffusion of both elements in Al grain boundaries but can be accelerated in the presence of interface disconnections. A qualitative explanation of the sluggish interphase boundary diffusion is proposed. Atomic mechanisms of interphase boundary diffusion are similar to those in metallic grain boundaries and are dominated by correlated atomic rearrangements in the form of strings and rings of collectively moving atoms.

cond-mat.mtrl-sci↗

arXiv2022

Point defect avalanches mediate grain boundary diffusion

Grain boundary (GB) diffusion in polycrystalline materials is a physical phenomenon of great fundamental interest and practical significance. Although the accelerated ("short circuit") atomic transport along GBs has been known for decades, the current atomic-level understanding of GB diffusion remains poor. Experiments can measure numerical values of GB diffusion coefficients but provide little information about the underlying mechanisms. Previous atomistic simulations focused on relatively low temperatures when the GB structure is ordered or relatively high temperatures when it is highly disordered. Here, we report on molecular dynamics simulations of GB diffusion at intermediate temperatures, which are most relevant to applications. One of the surprising results of this work is the observation of strongly intermittent GB diffusion behavior and its strong system-size dependence unseen in previous work. We demonstrate that both effects originate from an intermittent, avalanche-type generation of point defects causing spontaneous bursts of GB diffusivity mediated by highly cooperative atomic rearrangements. We identify the length and time scales of the avalanches and link their formation to the dynamic heterogeneity phenomenon in partially disordered systems. Our findings have significant implications for future computer modeling of GB diffusion and mass transport in nano-scale materials.

cond-mat.mtrl-sci↗

arXiv2021

Development of a physically-informed neural network interatomic potential for tantalum

Large-scale atomistic simulations of materials heavily rely on interatomic potentials, which predict the system energy and atomic forces. One of the recent developments in the field is constructing interatomic potentials by machine-learning (ML) methods. ML potentials predict the energy and forces by numerical interpolation using a large reference database generated by quantum-mechanical calculations. While high accuracy of interpolation can be achieved, extrapolation to unknown atomic environments is unpredictable. The recently proposed physically-informed neural network (PINN) model significantly improves the transferability by combining a neural network regression with a physics-based bond-order interatomic potential. Here, we demonstrate that general-purpose PINN potentials can be developed for body-centered cubic (BCC) metals. The proposed PINN potential for tantalum reproduces the reference energies within 2.8 meV/atom. It accurately predicts a broad spectrum of physical properties of Ta, including (but not limited to) lattice dynamics, thermal expansion, energies of point and extended defects, the dislocation core structure and the Peierls barrier, the melting temperature, the structure of liquid Ta, and the liquid surface tension. The potential enables large-scale simulations of physical and mechanical behavior of Ta with nearly first-principles accuracy while being orders of magnitude faster. This approach can be readily extended to other BCC metals.

cond-mat.mtrl-sci↗

arXiv2015

Segregation-induced phase transformations in grain boundaries

Phase transformations in metallic grain boundaries (GBs) present significant fundamental interest in the context of thermodynamics of low-dimensional physical systems. We report on atomistic computer simulations of the Cu-Ag system that provide direct evidence that GB phase transformations in a single-component GB can continue to exist in a binary alloy. This gives rise to segregation-induced phase transformations with varying chemical composition at a fixed temperature. Furthermore, for such transformations we propose an approach to calculations of free energy differences between different GB phases by thermodynamic integration along a segregation isotherm. This opens the possibility of developing quantitative thermodynamics of GB phases, their transformations to each other, and critical phenomena in the future.

cond-mat.mtrl-sci↗

arXiv2015

Phases, phase equilibria and phase rules in low-dimensional systems

We present a unified approach to thermodynamic description of one, two and three dimensional phases and phase transformations among them. The approach is based on a rigorous definition of a phase applicable to thermodynamic systems of any dimensionality. Within this approach, the same thermodynamic formalism can be applied for the description of phase transformations in bulk systems, interfaces, and line defects separating interface phases. For both lines and interfaces, we rigorously derive an adsorption equation, the phase coexistence equations, and other thermodynamic relations expressed in terms of generalized line and interface excess quantities. As a generalization of the Gibbs phase rule for bulk phases, we derive phase rules for lines and interfaces and predict the maximum number of phases than may coexist in systems of the respective dimensionality.

cond-mat.mtrl-sci↗

arXiv2013

Structural phase transformations in metallic grain boundaries

Structural transformations at interfaces are of profound fundamental interest as complex examples of phase transitions in low-dimensional systems. Despite decades of extensive research, no compelling evidence exists for structural transformations in high-angle grain boundaries in elemental systems. Here we show that the critical impediment to observations of such phase transformations in atomistic modeling has been rooted in inadequate simulation methodology. The proposed new methodology allows variations in atomic density inside the grain boundary and reveals multiple grain boundary phases with different atomic structures. Reversible first-order transformations between such phases are observed by varying temperature or injecting point defects into the boundary region. Due to the presence of multiple metastable phases, grain boundaries can absorb significant amounts of point defects created inside the material by processes such as irradiation. We propose a novel mechanism of radiation damage healing in metals which may guide further improvements in radiation resistance of metallic materials through grain boundary engineering.

cond-mat.mtrl-sci↗

arXiv2013

Molecular dynamics modeling of self-diffusion along a triple junction

We propose a computational procedure for creating a stable equilibrium triple junction (TJ) with controlled grain misorientations. We apply this procedure to construct a TJ between a Σ5(210) grain boundary (GB) and two general high-angle GBs in copper, and calculate the diffusion coefficients along the TJ and the GBs using molecular dynamics with an embedded-atom potential. The TJ diffusion is only a factor of two faster than diffusion in the Σ5 GB but significantly faster than diffusion in the general GBs. Both the GBs and the TJ studied here show a premelting behavior near the bulk melting point, where their diffusivities converge to the diffusivity of bulk liquid. Although our results are consistent with the common assumption that TJ diffusion is generally faster than GB diffusion, the difference between the two diffusivities does not appear to be large enough to ensure a significant contribution of TJs to diffusional creep in polycrystals at high temperatures.

cond-mat.mtrl-sci↗