arXiv subjects

Yurii P. Ivanov

Publications and source records attributed to Yurii P. Ivanov.

14 recordsLinked to original sources

arXiv2026

Synthesis and Structural Analysis of an Emissive Colloidal Argyrodite Nanocrystal: Canfieldite Ag8SnS6

We resolve a phase identification controversy in the Ag-Sn-S material system by unraveling the polymorphic structure of nanocrystals within the argyrodite material family. Argyrodites are a class of superionic materials used in their bulk form for applications in solid-state batteries and thermoelectrics, where their advantageous properties relate to their polymorphism. However, despite their well-studied bulk applications, the limited exploration at the nanoscale has left considerable potential for the discovery of emerging properties due to size effects. Further, phase identification presents a prominent challenge to the study of polymorphs in superionic conductors and related mate-rials. In this work, we synthesize canfieldite-like (Ag8SnS6) nanocrystals to understand their formation and structural behavior at the nanoscale. We observe the emergence of emissive, meta-stable, cluster-like species. Then, high-resolution transmission electron microscopy reveals indistinguishable polymorphs of canfieldite due to identical heavy-atom frameworks. However, using synchrotron X-ray total scattering for pair distribution function analysis, we uncover structural distortions, showing a pseudo-orthorhombic configuration that likely gives rise to the red emission. Further, we investigate the optical properties and structure of Ag8SnS6 nanocrystals upon the addition of Zn2+, the cation of interest in the canfieldite vs. pirquitasite (Ag2ZnSnS4) phase identification controversy. We show that Zn2+ is incorporated in the canfieldite-like structure through the replacement of Ag+, boosting the emission. Our results solve a standing phase identification challenge and uncover fundamental insights for the synthesis and structure of canfieldite nanocrystals, laying the ground for the exploration of other argyrodite materials with emerging properties at the nanoscale.

cond-mat.mtrl-sci↗

arXiv2025

Exogenous Metal Cations in the Synthesis of CsPbBr3 Nanocrystals and their Interplay with Tertiary Amines

Current syntheses of CsPbBr3 halide perovskite nanocrystals (NCs) rely on over-stoichiometric amounts of Pb2+ precursors, resulting in unreacted lead ions at the end of the process. In our synthesis scheme of CsPbBr3 NCs we replaced excess Pb2+ with different exogenous metal cations (M) and investigated their effect on the synthesis products. These cations can be divided into two groups: group 1 delivers monodisperse CsPbBr3 cubes capped with oleate species (as for the case when Pb2+ is used in excess) and with photoluminescence quantum yield (PLQY) as high as 90% with some cations (for example with M= In3+); group 2 yields irregularly shaped CsPbBr3 NCs with broad size distributions. In both cases, the addition of a tertiary ammonium cation (didodecylmethyl ammonium, DDMA+) during the synthesis, after the nucleation of the NCs, reshapes the NCs to monodisperse truncated cubes. Such NCs feature a mixed oleate/DDMA+ surface termination with PLQY values up to 90%. For group 1 cations, this happens only if the ammonium cation is directly added as a salt (DDMA-Br) while for group 2 cations this happens even if the corresponding tertiary amine (DDMA) is added, instead of DDMA-Br. This is attributed to the fact that only group 2 cations can facilitate the protonation of DDMA by the excess oleic acid present in the reaction environment. In all cases studied, the incorporation of M cations is marginal and the reshaping of the NCs is only transient: if the reactions are run for a long time the truncated cubes evolve to cubes.

cond-mat.mtrl-sci↗

arXiv2025

Core@Shell AgBr@CsPbBr3 Nanocrystals as Precursors to Hollow Lead Halide Perovskite Nanocubes

We report the synthesis of colloidal core@shell AgBr@CsPbBr3 nanocubes by a one-pot approach, where the nucleation and growth of AgBr nanocrystals occurs rapidly after the injection of chemical precursors. This is immediately followed by the overgrowth of CsPbBr3, delivering AgBr@CsPbBr3 nanocubes of several tens of nanometers in size, with the volume of the AgBr core being only a small fraction of the overall nanocrystal volume. The formation of a core@shell geometry is facilitated by the epitaxial compatibility between AgBr and CsPbBr3 along multiple crystallographic directions. Exchange with Cl-ions leads to Ag@CsPbCl3 nanocubes, whereas exchange with I-ions leads to hollow CsPbI3 nanocubes, due to selective etching of the AgBr (or Ag) core region by the I-ions diffusing in the nanocubes. These hollow CsPbI3 nanocubes can then be converted into hollow CsPbBr3 and CsPbCl3 nanocubes by halide exchange. The optical emission properties of the hollow CsPbX3 (X=Cl, Br, I) nanocubes are in line with those expected from large, non-hollow halide perovskite nanocrystals, indicating that the small hollow region in the cubes has no major influence on their optical properties.

cond-mat.mtrl-sci↗

arXiv2025

Nanocrystals Heterostructures based on Halide Perovskites and Metal Sulfides

We report the synthesis of nanocrystal heterostructures composed of CsPbCl3 and PbS domains sharing an epitaxial interface. We were able to promote the growth of a PbS domain (in competition with the more commonly observed Pb4S3Cl2 one) on top of the CsPbCl3 domain by employing Mn2$^+$ ions, the latter acting most likely as scavengers of Cl$^-$ ions. Complete suppression of the Pb4S3Cl2 domain growth was then achieved by additionally selecting an appropriate sulfur source (bis(trimethylsilyl)sulfide, which also acted as scavenger of Cl$^-$ ions), and reaction temperature. In the heterostructures, emission from the perovskite domain was quenched, while emission from the PbS domain was observed, pointing to a type-I band alignment, as confirmed by calculations. These heterostructures in turn could be exploited to prepare second-generation heterostructures through selective ion exchange on the individual domains (halide ion exchange on CsPbCl3, cation exchange on PbS). We demonstrate the cases of Cl$^-$ to Br$^-$ and Pb2$^+$ to Cu$^+$ exchanges, which deliver CsPbBr3@PbS and CsPbCl3@Cu2-xS epitaxial heterostructures, respectively.

cond-mat.mtrl-sci↗

arXiv2025

Halide Perovskite-Chalcohalide Nanocrystal Heterostructures as a Platform for the Synthesis and Investigation of the CsPbCl3-CsPbI3 Epitaxial Interface

Halide exchange in lead-based halide perovskites has been studied extensively. While mixed Cl-Br or Br-I alloy compositions can be formed with no miscibility gaps, this is precluded for mixed Cl-I compositions, due to the large difference in Cl and I ionic radii. Here, we exploit perovskite-chalcohalide CsPbCl3-Pb4S3Cl2 heterostructures to study the Cl-I exchange and isolate new types of intermediate structures. The epitaxial interface between the Pb4S3Cl2 chalcohalide and the CsPbCl3 perovskite domain significantly influences the intermediate stages of halide exchange in the perovskite domain, leading to coexisting CsPbCl3 and CsPbI3 domains, thereby delivering segmented CsPbI3-CsPbCl3-Pb4S3Cl2 energetically favorable heterostructures, with partial iodide alloying of the CsPbCl3 domain and at the perovskite-chalcohalide interface. The I:CsPbCl3 domain between CsPbI3 and Pb4S3Cl2 enables a gradual lattice expansion across the heterostructure. This design accommodates interfacial strain, with a 5.6% mismatch at the CsPbCl3-CsPbI3 interface and a 3.4% mismatch at the perovskite-chalcohalide interface. Full halide exchange leads to CsPbI3-Pb4S3Cl2 heterostructures. Both in intermediate and fully exchanged heterostructures, the CsPbI3 domain is emissive. In the intermediate structures, the band alignment between the two perovskite domains is type-I, with carriers photogenerated in the CsPbCl3 domain quickly transferring to the CsPbI3 domain, where they can recombine radiatively.

cond-mat.mtrl-sci↗

arXiv2025

Breaking the Boundaries of the Goldschmidt Tolerance Factor with Ethylammonium Lead Iodide Perovskite Nanocrystals

We report the synthesis of ethylammonium lead iodide (EAPbI3) colloidal nanocrystals as another member of the lead halide perovskites family. The insertion of an unusually large A-cation (274 pm in diameter) in the perovskite structure, hitherto considered unlikely due to the unfavorable Goldschmidt tolerance factor, results in a significantly larger lattice parameter compared to the Cs-, methylammonium- and formamidinium-based lead halide perovskite homologues. As a consequence, EAPbI3 nanocrystals are highly unstable, evolving to a non-perovskite delta-EAPbI3 polymorph within one day. Also, EAPbI3 nanocrystals are very sensitive to electron irradiation and quickly degrade to PbI2 upon exposure to the electron beam, following a mechanism similar to that of other hybrid lead iodide perovskites (although degradation can be reduced by partially replacing the EA+ ions with Cs+ ions). Interestingly, in some cases during this degradation the formation of an epitaxial interface between (EAxCs1-x)PbI3 and PbI2 is observed. The photoluminescence emission of the EAPbI3 perovskite nanocrystals, albeit being characterized by a low quantum yield (around 1%), can be tuned in the 664-690 nm range by regulating their size during the synthesis. The emission efficiency can be improved upon partial alloying at the A site with Cs+ or formamidinium cations. Furthermore, the morphology of the EAPbI3 nanocrystals can be chosen to be either nanocube or nanoplatelet, depending on the synthesis conditions.

cond-mat.mtrl-sci↗

arXiv2025

Silver Alloyed Wide Bandgap (Ag,Cu)(In,Ga)S2 Thin Film Solar Cells With 15.5% Efficiency

Sulfide chalcopyrite Cu(In,Ga)S2 (CIGS) is a wide bandgap semiconductor suitable for the top cell of a tandem solar device. Here we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S2 (ACIGS) absorbers. We report the Ag alloying effect on compositional, structural, and optoelectronic properties of absorbers. We demonstrate suppressed bulk recombination and improved carrier lifetime in ACIGS, as a result of improved grain size, porosity reduction and defect passivation. We also show that Ag alloying flattens the Ga gradient. Consideration of this impact of Ag will be necessary in future engineering of the Ga profile to maximize charge carrier collection and avoid interface recombination. Exploiting the beneficial effects of Ag alloying, we report a wide bandgap (1.58 eV) ACIGS solar cell with a high power conversion efficiency of 15.5% and a large open-circuit voltage (VOC) of 948 mV, improving on the reference pure CIGS solar cell, with an 11.2% efficiency and an 821 mV VOC. Ag alloying is a useful route to further increase the efficiency of CIGS solar cells and future tandem devices.

cond-mat.mtrl-sci↗

arXiv2025

Sinusoidal Displacement Describes Disorder in CsPbBr3 Nanocrystal Superlattices

Disorder is an intrinsic feature of all solids, from crystals of atoms to superlattices of colloidal nanoparticles. Unlike atomic crystals, in nanocrystal superlattices a single misplaced particle can affect the positions of neighbors over long distances, leading to cumulative disorder. This elusive form of collective particle displacement leaves clear signatures in diffraction, but little is known about how it accumulates and propagates throughout the superlattice. Here we rationalize propagation and accumulation of disorder in a series of CsPbBr3 nanocrystal superlattices by using synchrotron grazing incidence small- and wide-angle X-ray scattering. CsPbBr3 nanocrystals of colloidal softness S in the range of 0.3-0.7 were obtained by preparing particles with different sizes and ligand mixtures, consisting of oleic acid and primary amines of variable lengths. Most diffraction patterns showed clear signatures of anisotropic disorder, with multilayer diffraction characteristics of high structural coherence visible only for the {100} axial directions and lost in all other directions. As the softness decreased, the superlattices transitioned to a more ordered regime where small-angle diffraction peaks became resolution-limited, and superlattice multilayer diffraction appeared for the (110) diagonal reflections. To rationalize these anisotropies in structural coherence and their dependence on superlattice softness, we propose a sinusoidal displacement model where longitudinal and transverse displacements modulate nanocrystal positions. The model explains experimental observations and advances the understanding of disorder in mesocrystalline systems as they approach the limits of structural perfection.

cond-mat.mtrl-sci↗

arXiv2025

Wettability and sp2/sp3 ratio effects on supercapacitor performance of N-doped hydrogenated amorphous Carbon Nanofoam

Pulsed laser-deposited amorphous carbon nanofoams are potential candidate for electrochemical energy storage applications due to ultra-light weight, large volumetric void fractions, and co-existence of sp, sp2 and sp3 carbon hybridization. It is known that charge storage in carbon nanostructures containing disordered sp2-domains is determined by their wettability, surface area, and porosity. However, their charge-storage performance is limited to the areal capacitance of the order of a few mF/cm2. We enhanced the supercapacitor performance of nitrogen-doped amorphous carbon nanofoam by engineering its wettability and sp2-C/sp3-C ratio by vacuum annealing. The specific capacitance was enhanced by about fifty times and the device voltage increased from 0.8 to 1.1 V compared to as-grown carbon nanofoam. In addition, we examined for the first time the initial increase in specific capacitance of the aqueous symmetric supercapacitor with respect to the scan rate, employing in-situ measurements coupling Raman spectroscopy and electrochemistry. We attribute this effect, observed but generally not explained in previous works in the literature, to the electrochemical activation induced by structural changes during the charge storage performance. This optimization of pulsed laser deposited carbon nanofoam may open an avenue for fabricating lightweight and porous nanostructures for advanced macro-to-micro-supercapacitor devices.

cond-mat.mtrl-sci↗

arXiv2025

Copper-based disordered plasmonic system with dense nanoisland morphology

Dry synthesis is a highly versatile method for the fabrication of nanoporous metal films, since it enables easy and reproducible deposition of single or multi-layer(s) of nanostructured materials that can find intriguing applications in plasmonics, photochemistry and photocatalysis, to name a few. Here, we extend the use of this methodology to the preparation of copper nanoislands that represent an affordable and versatile example of disordered plasmonic substrate. We perform detailed characterizations of the system using several techniques such as spectroscopic ellipsometry, cathodoluminescence, electron energy loss spectroscopy, ultrafast pump-probe spectroscopy and second-harmonic generation with the aim to investigate the optical properties of these systems in an unprecedented systematic way. Our study represents the starting point for future applications of this new disordered plasmonic system ranging from sensing to photochemistry and photocatalysis.

physics.app-ph↗

arXiv2023

Dry synthesis of bi-layer nanoporous metal films as plasmonic metamaterial

Nanoporous metals are a class of nanostructured materials finding extensive applications in multiple fields thanks to their unique properties attributed to their high surface area and interconnected nanoscale ligaments. They can be pre-pared following different strategies, but the deposition of an arbitrary pure porous metal is still challenging. Recently, a dry synthesis of nanoporous films based on the plasma treat-ment of metal thin layers deposited by physical vapour deposition has been demonstrated, as a general route to form pure nanoporous films from a large set of metals. An interest-ing aspect related to this approach is the possibility to apply the same methodology to deposit the porous films as a multilayer. In this way, it is possible to explore the properties of different porous metals in close contact. As demonstrated in this paper, interesting plasmonic properties emerge in a nanoporous Au-Ag bi-layer. The versatility of the method coupled with the possibility to include many different metals, provides an opportunity to tailor their optical resonances and to exploit the chemical and mechanical properties of compo-nents, which is of great interest to applications ranging from sensing, to photochemistry and photocatalysis.

physics.app-ph↗

arXiv2023

Effects of fabrication routes and material parameters on the control of superconducting currents by gate voltage

The control of a superconducting current via the application of a gate voltage has been recently demonstrated in a variety of superconducting devices. Although the mechanism underlying this gate-controlled supercurrent (GCS) effect remains under debate, the GCS effect has raised great interest for the development of the superconducting equivalent of conventional metaloxide semiconductor electronics. To date, however, the GCS effect has been mostly observed in superconducting devices made by additive patterning. Here, we show that devices made by subtractive patterning show a systematic absence of the GCS effect. Doing a microstructural analysis of these devices and comparing them to devices made by additive patterning, where we observe a GCS, we identify some material and physical parameters that are crucial for the observation of a GCS. We also show that some of the mechanisms proposed to explain the origin of the GCS effect are not universally relevant.

cond-mat.supr-con↗

arXiv2018

Current Controlled Magnetization Switching in Cylindrical Nanowires for High-Density 3D Memory Applications

A next-generation memory device utilizing a three-dimensional nanowire system requires the reliable control of domain wall motion. In this letter, domain walls are studied in cylindrical nanowires consisting of alternating segments of cobalt and nickel. The material interfaces acting as domain wall pinning sites, are utilized in combination with current pulses, to control the position of the domain wall, which is monitored using magnetoresistance measurements. Magnetic force microscopy results further confirm the occurrence of current assisted domain wall depinning. Data bits are therefore shifted along the nanowire by sequentially pinning and depinning a domain wall between successive interfaces, a requirement necessary for race-track type memory devices. We demonstrate that the direction, amplitude and duration of the applied current pulses determine the propagation of the domain wall across pinning sites. These results demonstrate a multi-bit cylindrical nanowire device, utilizing current assisted data manipulation. The prospect of sequential pinning and depinning in these nanowires allows the bit density to increase by several Tbs, depending on the number of segments within these nanowires.

physics.app-ph↗

arXiv2017

Magnon mode selective spin transport in compensated ferrimagnets

We investigate the generation of magnonic thermal spin currents and their mode selective spin transport across interfaces in insulating, compensated ferrimagnet/normal metal bilayer systems. The spin Seebeck effect signal exhibits a non-monotonic temperature dependence with two sign changes of the detected voltage signals. Using different ferrimagnetic garnets, we demonstrate the universality of the observed complex temperature dependence of the spin Seebeck effect. To understand its origin, we systematically vary the interface between the ferrimagnetic garnet and the metallic layer, and by using different metal layers we establish that interface effects play a dominating role. They do not only modify the magnitude of the spin Seebeck effect signal but in particular also alter its temperature dependence. By varying the temperature, we can select the dominating magnon mode and we analyze our results to reveal the mode selective interface transmission probabilities for different magnon modes and interfaces. The comparison of selected systems reveals semi-quantitative details of the interfacial coupling depending on the materials involved, supported by the obtained field dependence of the signal.

cond-mat.mtrl-sci↗