arXiv subjects

Yusuke Takeuchi

Publications and source records attributed to Yusuke Takeuchi.

6 recordsLinked to original sources

arXiv2026

Strain-Tuned Nodal Superconductivity in the Charge-Ordered Kagome Metal CsV$_3$Sb$_5$

The nature of the superconducting pairing symmetry in the kagome metal CsV$_3$Sb$_5$ and its relationship with the charge density wave (CDW) order are central unresolved issues. Here, we investigate the evolution of superconductivity in CsV$_3$Sb$_5$ under in-situ uniaxial pressure using $^{121}$Sb nuclear quadrupole resonance (NQR). We find that tensile strain significantly enhances the superconducting transition temperature, $T_{\rm c}$, while the CDW remains unchanged, demonstrating that superconductivity can be tuned independently of the bulk charge order. At a tensile strain of $\varepsilon$ = +0.90%, the nuclear spin-lattice relaxation rate reveals a remarkable double transition: an upper transition at $T_{\rm c1}$ = 3.6 K to a nodal gap state, and a lower one at $T_{\rm c2}$ = 3.0 K characterized by a nodeless gap. These results evidence degenerate superconducting states with different gap symmetry in the kagome metal at ambient pressure which split under strain. Our work demonstrates a high tunability of superconductivity by uniaxial pressure.

cond-mat.supr-con↗

arXiv2026

Construction and characterization of a muon trigger detector for the PSI muEDM experiment

We present the upgraded design, construction, and beam test results for the Muon Trigger Detector (MTD) developed for the muon Electric Dipole Moment (muEDM) experiment at the Paul Scherrer Institute (PSI) in Switzerland. This experiment aims to improve the sensitivity of the muon EDM measurement by more than three orders of magnitude beyond the current limit established by the BNL Muon $g-2$ experiment. Precise identification of storable incoming muons at the entrance of the storage solenoid is essential, as the MTD must rapidly trigger a pulsed magnetic kicker to confine muons in the central region of the solenoid, where a weakly focusing magnetic field is maintained. The MTD comprises two subsystems: a \SI{0.1}{mm}-thick plastic scintillator ``gate detector'' read out by four silicon photomultipliers (SiPMs), and a \SI{5}{mm}-thick CNC-machined plastic scintillator ``active aperture detector'' read out by six SiPMs. The geometry of the active aperture detector was optimized through acceptance studies to maximize both storage efficiency and background veto efficiency. Integrated fast electronics generate an LVTTL trigger signal under an anti-coincidence condition -- a muon detected in the gate but not in the aperture -- ensuring selective triggering of storable muon events for the EDM measurement. The system was tested at the PSI $\pi$E1 beamline using \SI{22.5}{MeV/\textit{c}} muons under scaled-down conditions to characterize detector response and trigger performance. A Geant4 simulation incorporating detailed optical photon transport and SiPM response modeling was developed and reproduces the measured event topologies with ${\sim}97\%$ agreement. These results validate the detector design and demonstrate the MTD's readiness for deployment in the full muEDM Phase-1 setup.

physics.ins-det↗

arXiv2025

Towards Non-Invasive Sediment Monitoring Using Muography: A Pilot Run at the Shanghai Outer Ring Tunnel

This study demonstrates the application of cosmic-ray muography as a non-invasive method for monitoring sediment accumulation and tidal influences in the Shanghai Outer Ring Tunnel, an immersed tube tunnel located beneath the Huangpu River in Shanghai, China. A portable, dual-layer plastic scintillator detector was deployed to conduct muon flux scans along the tunnel's length and to continuously monitor muon flux, allowing for the study of tidal effects. Geant4 simulations validated the correlation between muon attenuation and overburden thickness, incorporating sediment, water, and concrete layers. Key findings include a strong anti-correlation between the measured muon flux and the water levels observed at a nearby tide gauge. The results align with geotechnical data and simulations, especially in the region of interest, confirming muography's sensitivity to sediment dynamics. This work establishes muography as a robust tool for long-term, real-time monitoring of submerged infrastructure, offering significant advantages over conventional invasive techniques. The study underscores the potential for integrating muography into civil engineering practices to enhance safety and operational resilience in tidal environments.

physics.app-ph↗

arXiv2025

Bayesian optimization of beam injection and storage in the PSI muEDM Experiment

The muEDM experiment at the Paul Scherrer Institute aims to measure the electric dipole moment with an unprecedented sensitivity of $6 \times 10^{-23}\,\mathrm{e}\cdot\mathrm{cm}$. A key aspect of this experiment is the injection and storage of the muon beam, which traverses a long, narrow superconducting channel before entering a solenoid magnet. The muon is then kicked by a pulsed magnetic field into a stable orbit within the solenoid's central region, where the electric dipole moment is measured. To study the beam injection and storage process, we developed a G4beamline simulation to model the dynamics of beam injection and storage, incorporating all relevant electric and magnetic fields. We subsequently employed a Bayesian optimization technique to improve the muon storage efficiency for Phase I of the muEDM experiment. The optimization is demonstrated using data simulated by G4beamline. We have observed an enhancement in the beam injection and storage efficiency, which increased to 0.556\% through the utilization of Bayesian optimization with Gaussian processes, compared to 0.324\% when employing the polynomial chaos expansion. This approach can be applied to adjust actual experimental parameters, aiding in achieving the desired performance for beam injection and storage in the muEDM experiment.

physics.acc-ph↗

arXiv2025

Simulation studies of a high-repetition-rate electron-driven surface muon beamline at SHINE

A high-repetition-rate pulsed muon source operating at approximately 50\,kHz holds the potential to improve the sensitivity of various particle physics and material science experiments involving muons. In this article, we propose utilizing the high-repetition-rate pulsed electron beam at the SHINE facility to generate a surface muon beam. Our simulation studies indicate that an 8\,GeV, 100\,pC charge pulsed electron beam impinging on a copper target can produce up to $2 \times 10^{3}$ muons per pulse. Beamline optimization results demonstrate that approximately 60 surface muons per electron bunch can be efficiently transported to the end of the beamline. This translates to a surface muon rate of $3 \times 10^{6}\,\mu^{+}$/s when the pulsed electron beam is operated at 50\,kHz, which is comparable to existing muon facilities. This high-repetition-rate pulsed muon beam, with its ideal time structure, represents a unique and pioneering effort once constructed. It serves as a model for building cost-effective muon sources at existing electron machines with GeV electron energies. In addition to the typical challenges encountered in conventional muon beamlines, such as the installation and construction of the target station and beamline, the removal of substantial quantities of positrons is also a major challenge. A potential solution to this issue is also discussed.

physics.acc-ph↗

arXiv2025

Development of Fast Front-End Electronics for the Muon Trigger Detector in the PSI muEDM Experiment

This paper outlines the design and development of a fast front-end electronic readout board for the muon trigger detector in the muEDM experiment at the Paul Scherrer Institute. The trigger detector, which consists of a gate and aperture detector, is strategically located at the end of the superconducting injection channel to generate trigger signals for a magnetic kicker, which activates upon the injection of muons into the central region of the storage solenoid. Within the magnetic field of the solenoid, the system configuration is optimized to meet stringent performance specifications, including minimal signal propagation delays, high detection efficiency, non-magnetic properties, and consistent operational stability under varying experimental conditions. Additionally, the design incorporates robust methods for rejecting positron contamination in the muon beamline. The results presented include performance evaluations from both bench testing and actual beam tests, highlighting the effectiveness and reliability of the electronic design.

physics.ins-det↗