arXiv subjects

Yuxuan Zhang

Publications and source records attributed to Yuxuan Zhang.

194 records · Page 11Linked to original sources

arXiv2021

Optical phonon modes, static and high frequency dielectric constants, and effective electron mass parameter in cubic In$_2$O$_3$

A complete set of all optical phonon modes predicted by symmetry for bixbyite structure indium oxide is reported here from a combination of far-infrared and infrared spectroscopic ellipsometry, as well as first principle calculations. Dielectric function spectra measured on high quality, marginally electrically conductive melt grown single bulk crystals are obtained on a wavelength-by-wavelength (a.k.a. point-by-point) basis and by numerical reduction of a subtle free charge carrier Drude model contribution. A four-parameter semi-quantum model is applied to determine all sixteen pairs of infrared-active transverse and longitudinal optical phonon modes, including the high-frequency dielectric constant, $\varepsilon_{\infty}=4.05\pm 0.05$. The Lyddane-Sachs-Teller relation then gives access to the static dielectric constant, $\varepsilon_{\mathrm{DC}}=10.55\pm 0.07$. All experimental results are in excellent agreement with our density functional theory calculations and with previously reported values, where existent. We also perform optical Hall effect measurements and determine for the unintentionally doped $n$-type sample a free electron density of $n=(2.81 \pm 0.01)\times 10^{17}$~cm$^{-3}$, mobility of $μ=(112 \pm 3)$~cm$^{2}$/(Vs), and an effective mass parameter of $(0.208\pm0.006)m_e$. Density and mobility parameters compare very well with results of electrical Hall effect measurements. Our effective mass parameter, which is measured independently of any other experimental technique, represents the bottom curvature of the $Γ$ point in In$_2$O$_3$ in agreement with previous extrapolations. We use terahertz spectroscopic ellipsometry to measure the quasi-static response of In$_2$O$_3$, and our model validates the static dielectric constant obtained from the Lyddane-Sachs-Teller relation.

cond-mat.mtrl-sci↗

arXiv2021

Image GANs meet Differentiable Rendering for Inverse Graphics and Interpretable 3D Neural Rendering

Differentiable rendering has paved the way to training neural networks to perform "inverse graphics" tasks such as predicting 3D geometry from monocular photographs. To train high performing models, most of the current approaches rely on multi-view imagery which are not readily available in practice. Recent Generative Adversarial Networks (GANs) that synthesize images, in contrast, seem to acquire 3D knowledge implicitly during training: object viewpoints can be manipulated by simply manipulating the latent codes. However, these latent codes often lack further physical interpretation and thus GANs cannot easily be inverted to perform explicit 3D reasoning. In this paper, we aim to extract and disentangle 3D knowledge learned by generative models by utilizing differentiable renderers. Key to our approach is to exploit GANs as a multi-view data generator to train an inverse graphics network using an off-the-shelf differentiable renderer, and the trained inverse graphics network as a teacher to disentangle the GAN's latent code into interpretable 3D properties. The entire architecture is trained iteratively using cycle consistency losses. We show that our approach significantly outperforms state-of-the-art inverse graphics networks trained on existing datasets, both quantitatively and via user studies. We further showcase the disentangled GAN as a controllable 3D "neural renderer", complementing traditional graphics renderers.

cs.CV↗

arXiv2021

DatasetGAN: Efficient Labeled Data Factory with Minimal Human Effort

We introduce DatasetGAN: an automatic procedure to generate massive datasets of high-quality semantically segmented images requiring minimal human effort. Current deep networks are extremely data-hungry, benefiting from training on large-scale datasets, which are time consuming to annotate. Our method relies on the power of recent GANs to generate realistic images. We show how the GAN latent code can be decoded to produce a semantic segmentation of the image. Training the decoder only needs a few labeled examples to generalize to the rest of the latent space, resulting in an infinite annotated dataset generator! These generated datasets can then be used for training any computer vision architecture just as real datasets are. As only a few images need to be manually segmented, it becomes possible to annotate images in extreme detail and generate datasets with rich object and part segmentations. To showcase the power of our approach, we generated datasets for 7 image segmentation tasks which include pixel-level labels for 34 human face parts, and 32 car parts. Our approach outperforms all semi-supervised baselines significantly and is on par with fully supervised methods, which in some cases require as much as 100x more annotated data as our method.

cs.CV↗

arXiv2021

CelebHair: A New Large-Scale Dataset for Hairstyle Recommendation based on CelebA

In this paper, we present a new large-scale dataset for hairstyle recommendation, CelebHair, based on the celebrity facial attributes dataset, CelebA. Our dataset inherited the majority of facial images along with some beauty-related facial attributes from CelebA. Additionally, we employed facial landmark detection techniques to extract extra features such as nose length and pupillary distance, and deep convolutional neural networks for face shape and hairstyle classification. Empirical comparison has demonstrated the superiority of our dataset to other existing hairstyle-related datasets regarding variety, veracity, and volume. Analysis and experiments have been conducted on the dataset in order to evaluate its robustness and usability.

cs.CV↗

arXiv2021

Laser-Assisted Metalorganic Chemical Vapor Deposition of GaN

Ammonia (NH3) is commonly used as group V precursor in gallium nitride (GaN) metalorganic chemical vapor deposition (MOCVD). The high background carbon (C) impurity in MOCVD GaN is related to the low pyrolysis efficiency of NH3, which represents one of the fundamental challenges hindering the development of high purity thick GaN for vertical high power device applications. This work uses a laser-assisted MOCVD (LA-MOCVD) growth technique to address the high-C issue in MOCVD GaN. Carbon dioxide (CO2) laser with wavelength of 9.219 um was utilized to facilitate NH3 decomposition via resonant vibrational excitation. The LA-MOCVD GaN growth rate (as high as 10 um/hr) shows a strong linear relationship with the trimethylgallium (TMGa) flow rate, indicating high effective V/III ratios and hence efficient NH3 decomposition. Pits-free surface morphology of LA-MOCVD GaN was demonstrated for films with growth rate as high as 8.5 um/hr. The background [C] in LA-MOCVD GaN films decreases monotonically as the laser power increases. A low [C] at 5.5E15 cm-3 was achieved in LA-MOCVD GaN film grown with the growth rate of 4 um/hr. Charge transport characterization of LA-MOCVD GaN films reveals high crystalline quality with room temperature mobility >1000 cm2/Vs. LA-MOCVD growth technique provides an enabling route to achieve high quality GaN epitaxy with low-C impurity and fast growth rate simultaneously. This technique can also be extended for epitaxy of other nitride-based semiconductors.

physics.app-ph↗

arXiv2021

Topological charge density waves at half-integer filling of a moiré superlattice

At partial filling of a flat band, strong electronic interactions may favor gapped states harboring emergent topology with quantized Hall conductivity. Emergent topological states have been found in partially filled Landau levels and Hofstadter bands; in both cases, a large magnetic field is required to engineer the underlying flat band. The recent observation of quantum anomalous Hall effects (QAH) in narrow band moiré systems has led to the theoretical prediction that such phases may be realized even at zero magnetic field. Here we report the experimental observation of insulators with Chern number $C=1$ in the zero magnetic field limit at $ν=3/2$ and $7/2$ filling of the moiré superlattice unit cell in twisted monolayer-bilayer graphene (tMBG). Our observation of Chern insulators at half-integer values of $ν$ suggests spontaneous doubling of the superlattice unit cell, in addition to spin- and valley-ferromagnetism. This is confirmed by Hartree-Fock calculations, which find a topological charge density wave ground state at half filling of the underlying $C=2$ band, in which the Berry curvature is evenly partitioned between occupied and unoccupied states. We find the translation symmetry breaking order parameter is evenly distributed across the entire folded superlattice Brillouin zone, suggesting that the system is in the flat band, strongly correlated limit. Our findings show that the interplay of quantum geometry and Coulomb interactions in moiré bands allows for topological phases at fractional superlattice filling that spontaneously break time-reversal symmetry, a prerequisite in pursuit of zero magnetic field phases harboring fractional statistics as elementary excitations or bound to lattice dislocations.

cond-mat.str-el↗

arXiv2021

A prognostic dynamic model applicable to infectious diseases providing easily visualized guides -- A case study of COVID-19 in the UK

A reasonable prediction of infectious diseases transmission process under different disease control strategies is an important reference point for policy makers. Here we established a dynamic transmission model via Python and realized comprehensive regulation of disease control measures. We classified government interventions into three categories and introduced three parameters as descriptions for the key points in disease control, these being intraregional growth rate, interregional communication rate, and detection rate of infectors. Our simulation predicts the infection by COVID-19 in the UK would be out of control in 73 days without any interventions; at the same time, herd immunity acquisition will begin from the epicentre. After we introduced government interventions, single intervention is effective in disease control but at huge expense while combined interventions would be more efficient, among which, enhancing detection number is crucial in control strategy of COVID-19. In addition, we calculated requirements for the most effective vaccination strategy based on infection number in real situation. Our model was programmed with iterative algorithms, and visualized via cellular automata, it can be applied to similar epidemics in other regions if the basic parameters are inputted, and is able to synthetically mimick the effect of multiple factors in infectious disease control.

q-bio.PE↗

arXiv2021

Deep Neural Network Fingerprinting by Conferrable Adversarial Examples

In Machine Learning as a Service, a provider trains a deep neural network and gives many users access. The hosted (source) model is susceptible to model stealing attacks, where an adversary derives a surrogate model from API access to the source model. For post hoc detection of such attacks, the provider needs a robust method to determine whether a suspect model is a surrogate of their model. We propose a fingerprinting method for deep neural network classifiers that extracts a set of inputs from the source model so that only surrogates agree with the source model on the classification of such inputs. These inputs are a subclass of transferable adversarial examples which we call conferrable adversarial examples that exclusively transfer with a target label from a source model to its surrogates. We propose a new method to generate these conferrable adversarial examples. We present an extensive study on the irremovability of our fingerprint against fine-tuning, weight pruning, retraining, retraining with different architectures, three model extraction attacks from related work, transfer learning, adversarial training, and two new adaptive attacks. Our fingerprint is robust against distillation, related model extraction attacks, and even transfer learning when the attacker has no access to the model provider's dataset. Our fingerprint is the first method that reaches a ROC AUC of 1.0 in verifying surrogates, compared to a ROC AUC of 0.63 by previous fingerprints.

cs.LG↗

arXiv2020

Adaptive Radar Detection and Classification Algorithms for Multiple Coherent Signals

In this paper, we address the problem of target detection in the presence of coherent (or fully correlated) signals, which can be due to multipath propagation effects or electronic attacks by smart jammers. To this end, we formulate the problem at hand as a multiple-hypothesis test that, besides the conventional radar alternative hypothesis, contains additional hypotheses accounting for the presence of an unknown number of interfering signals. In this context and leveraging the classification capabilities of the Model Order Selection rules, we devise penalized likelihood-ratio-based detection architectures that can establish, as a byproduct, which hypothesis is in force. Moreover, we propose a suboptimum procedure to estimate the angles of arrival of multiple coherent signals ensuring (at least for the considered parameters) almost the same performance as the exhaustive search. Finally, the performance assessment, conducted over simulated data and in comparison with conventional radar detectors, highlights that the proposed architectures can provide satisfactory performance in terms of probability of detection and correct classification.

eess.SP↗

arXiv2020

Electrical switching of magnetic order in an orbital Chern insulator

Magnetism typically arises from the joint effect of Fermi statistics and repulsive Coulomb interactions, which favors ground states with non-zero electron spin. As a result, controlling spin magnetism with electric fields---a longstanding technological goal in spintronics and multiferroics---can be achieved only indirectly. Here, we experimentally demonstrate direct electric field control of magnetic states in an orbital Chern insulator, a magnetic system in which non-trivial band topology favors long range order of orbital angular momentum but the spins are thought to remain disordered. We use van der Waals heterostructures consisting of a graphene monolayer rotationally faulted with respect to a Bernal-stacked bilayer to realize narrow and topologically nontrivial valley-projected moiré minibands. At fillings of one and three electrons per moiré unit cell within these bands, we observe quantized anomalous Hall effects with transverse resistance approximately equal to $h/2e^2$, which is indicative of spontaneous polarization of the system into a single-valley-projected band with a Chern number equal to two. At a filling of three electrons per moiré unit cell, we find that the sign of the quantum anomalous Hall effect can be reversed via field-effect control of the chemical potential; moreover, this transition is hysteretic, which we use to demonstrate nonvolatile electric field induced reversal of the magnetic state. A theoretical analysis indicates that the effect arises from the topological edge states, which drive a change in sign of the magnetization and thus a reversal in the favored magnetic state. Voltage control of magnetic states can be used to electrically pattern nonvolatile magnetic domain structures hosting chiral edge states, with applications ranging from reconfigurable microwave circuit elements to ultralow power magnetic memory.

cond-mat.str-el↗

arXiv2020

A Combined Data-driven and Physics-driven Method for Steady Heat Conduction Prediction using Deep Convolutional Neural Networks

With several advantages and as an alternative to predict physics field, machine learning methods can be classified into two distinct types: data-driven relying on training data and physics-driven using physics law. Choosing heat conduction problem as an example, we compared the data- and physics-driven learning process with deep Convolutional Neural Networks (CNN). It shows that the convergences of the error to ground truth solution and the residual of heat conduction equation exhibit remarkable differences. Based on this observation, we propose a combined-driven method for learning acceleration and more accurate solutions. With a weighted loss function, reference data and physical equation are able to simultaneously drive the learning. Several numerical experiments are conducted to investigate the effectiveness of the combined method. For the data-driven based method, the introduction of physical equation not only is able to speed up the convergence, but also produces physically more consistent solutions. For the physics-driven based method, it is observed that the combined method is able to speed up the convergence up to 49.0\% by using a not very restrictive coarse reference.

physics.comp-ph↗

arXiv2020

A Sparse Learning Approach to the Detection of Multiple Noise-Like Jammers

In this paper, we address the problem of detecting multiple Noise-Like Jammers (NLJs) through a radar system equipped with an array of sensors. To this end, we develop an elegant and systematic framework wherein two architectures are devised to jointly detect an unknown number of NLJs and to estimate their respective angles of arrival. The followed approach relies on the likelihood ratio test in conjunction with a cyclic estimation procedure which incorporates at the design stage a sparsity promoting prior. As a matter of fact, the problem at hand owns an inherent sparse nature which is suitably exploited. This methodological choice is dictated by the fact that, from a mathematical point of view, classical maximum likelihood approach leads to intractable optimization problems (at least to the best of authors' knowledge) and, hence, a suboptimum approach represents a viable means to solve them. Performance analysis is conducted on simulated data and shows the effectiveness of the proposed architectures in drawing a reliable picture of the electromagnetic threats illuminating the radar system.

eess.SP↗

arXiv2020

Improvement of the Standard Characterization Method on k33 Mode Piezoelectric Specimens

Even though standard method to determine physical parameters of piezoelectric materials has been set up for several decades, bare attention has been made on loss determination method. Furthermore, several deficits have been recognized in the standard method for k33 mode. In this study, detailed discussion on deficits of IEEE Standard k33 is investigated and the method to resolve such deficits will be introduced. The standard k33 specimen suffers from small capacitance, which causes huge experimental error, intrinsic electrical energy leakage, specimen setup issue and inability to directly determine intensive elastic properties. In order to resolve these issues, partial electrode method was introduced, and curve fitting was demonstrated to determine physical parameters and losses.

physics.app-ph↗

arXiv2020

Analytical Modeling of k33 Mode Partial Electrode Configuration for Loss Characterization

Accurate determination of three types of losses (dielectric, elastic and piezoelectric) in piezoelectric materials is critical, since they are closely related to the performance of high-power piezoelectric devices. The Standard k33 mode has a number of serious deficits that hinders researchers from determining accurate physical parameters and losses. In order to overcome such deficits, partial electrode has been devised and proposed. This study provides analytical derivation process and proposes parameter determination method by utilizing analytical solutions. Compared to finite element analysis, analytical solutions show 0.1 % difference in resonance frequencies and 2 % difference in mechanical quality factors, proving them as valid modeling. The analytical solutions are fitted to experimental data to determine physical parameters and losses. The k33 (electromechanical coupling factor) values were calculated with determined values from curve fitting in two different ways and show good agreement to each other.

physics.app-ph↗