Searcharxiv⌕ Search

arXiv subjects

Yuyang Liu

Publications and source records attributed to Yuyang Liu.

At least 37 records · Page 2Linked to original sources

TimeRewarder: Learning Dense Reward from Passive Videos via Frame-wise Temporal Distance

Designing dense rewards is crucial for reinforcement learning (RL), yet in robotics it often demands extensive manual effort and lacks scalability. One promising solution is to view task progress as a dense reward signal, as it quantifies the degree to which actions advance the system toward task completion over time. We present TimeRewarder, a simple yet effective reward learning method that derives progress estimation signals from passive videos, including robot demonstrations and human videos, by modeling temporal distances between frame pairs. We then demonstrate how TimeRewarder can supply step-wise proxy rewards to guide reinforcement learning. In our comprehensive experiments on ten challenging Meta-World tasks, we show that TimeRewarder dramatically improves RL for sparse-reward tasks, achieving nearly perfect success in 9/10 tasks with only 200,000 environment interactions per task. This approach outperformed previous methods and even the manually designed environment dense reward on both the final success rate and sample efficiency. Moreover, we show that TimeRewarder pretraining can exploit real-world human videos, highlighting its potential as a scalable approach to rich reward signals from diverse video sources.

cs.AI↗

Reasoning Portability: Guiding Continual Learning for MLLMs in the RLVR Era

Vision-Language Models in Continual Learning (VLM-CL) aim to continuously adapt to new multimodal tasks while retaining prior knowledge. The emerging paradigm that couples Multimodal Large Language Models (MLLMs) with Reinforcement Learning with Verifiable Rewards (RLVR) calls for a new pattern to guide continual adaptation. Advances in reasoning capability now make it feasible to impose constraints at the reasoning level. We formalize portability, a sample-level measure of how reusable the previous policy's behavior is on a new task, and empirically show that reasoning-level signals remain reliable on out-of-distribution samples while answer-level signals do not. We instantiate this as Reasoning Portability (RP) and propose Reasoning-based Dynamic Balance Continual Learning (RDB-CL), which modulates the per-sample Kullback-Leibler regularization in RLVR according to RP: a tight anchor preserves reusable reasoning on high-RP samples, while a relaxed anchor on low-RP samples permits exploration of new reasoning pathways. Experiments show that RDB-CL consistently outperforms baselines, improving Last accuracy by +12.0% over the vanilla RLVR baseline.

cs.LG↗

BioProAgent: Neuro-Symbolic Grounding for Constrained Scientific Planning

Large language models (LLMs) have demonstrated significant reasoning capabilities in scientific discovery but struggle to bridge the gap to physical execution in wet-labs. In these irreversible environments, probabilistic hallucinations are not merely incorrect; they can cause equipment damage or experimental failure. We propose BioProAgent, a neuro-symbolic framework that anchors probabilistic planning in a deterministic Finite State Machine (FSM). We introduce a State-Augmented Planning mechanism that enforces a rigorous Design-Verify-Rectify workflow, ensuring hardware compliance before execution. Furthermore, we address the context bottleneck inherent in complex device schemas by Semantic Symbol Grounding, reducing token consumption by ~6* through symbolic abstraction. In the extended BioProBench benchmark, BioProAgent achieves 95.6% physical compliance (compared to 21.0% for ReAct), demonstrating that neuro-symbolic constraints are essential for reliable autonomy in irreversible physical environments. Code: https://github.com/YuyangSunshine/bioproagent | Website: https://yuyangsunshine.github.io/BioPro-Project.

cs.AI↗

NTIRE 2026 The 3rd Restore Any Image Model (RAIM) Challenge: AI Flash Portrait (Track 3)

In this paper, we present a comprehensive overview of the NTIRE 2026 3rd Restore Any Image Model (RAIM) challenge, with a specific focus on Track 3: AI Flash Portrait. Despite significant advancements in deep learning for image restoration, existing models still encounter substantial challenges in real-world low-light portrait scenarios. Specifically, they struggle to achieve an optimal balance among noise suppression, detail preservation, and faithful illumination and color reproduction. To bridge this gap, this challenge aims to establish a novel benchmark for real-world low-light portrait restoration. We comprehensively evaluate the proposed algorithms utilizing a hybrid evaluation system that integrates objective quantitative metrics with rigorous subjective assessment protocols. For this competition, we provide a dataset containing 800 groups of real-captured low-light portrait data. Each group consists of a 1K-resolution low-light input image, a 1K ground truth (GT), and a 1K person mask. This challenge has garnered widespread attention from both academia and industry, attracting over 100 participating teams and receiving more than 3,000 valid submissions. This report details the motivation behind the challenge, the dataset construction process, the evaluation metrics, and the various phases of the competition. The released dataset and baseline code for this track are publicly available from the same \href{https://github.com/zsn1434/AI_Flash-BaseLine/tree/main}{GitHub repository}, and the official challenge webpage is hosted on \href{https://www.codabench.org/competitions/12885/}{CodaBench}.

cs.CV↗

Scaling Up AI-Generated Image Detection with Generator-Aware Prototypes

The pursuit of a universal AI-generated image (AIGI) detector often relies on aggregating data from numerous generators to improve generalization. However, this paper identifies a paradoxical phenomenon we term the Benefit then Conflict dilemma, where detector performance stagnates and eventually degrades as source diversity expands. Our systematic analysis, diagnoses this failure by identifying two core issues: severe data-level heterogeneity, which causes the feature distributions of real and synthetic images to increasingly overlap, and a critical model-level bottleneck from fixed, pretrained encoders that cannot adapt to the rising complexity. To address these challenges, we propose Generator-Aware Prototype Learning (GAPL), a framework that constrain representation with a structured learning paradigm. GAPL learns a compact set of canonical forgery prototypes to create a unified, low-variance feature space, effectively countering data heterogeneity.To resolve the model bottleneck, it employs a two-stage training scheme with Low-Rank Adaptation, enhancing its discriminative power while preserving valuable pretrained knowledge. This approach establishes a more robust and generalizable decision boundary. Through extensive experiments, we demonstrate that GAPL achieves state-of-the-art performance, showing superior detection accuracy across a wide variety of GAN and diffusion-based generators. Code is available at https://github.com/UltraCapture/GAPL

cs.CV↗

PRM-as-a-Judge: A Dense Evaluation Paradigm for Fine-Grained Robotic Auditing

Current robotic evaluation is still largely dominated by binary success rates, which collapse rich execution processes into a single outcome and obscure critical qualities such as progress, efficiency, and stability. To address this limitation, we propose PRM-as-a-Judge, a dense evaluation paradigm that leverages Process Reward Models (PRMs) to audit policy execution directly from trajectory videos by estimating task progress from observation sequences. Central to this paradigm is the OPD (Outcome-Process-Diagnosis) metric system, which explicitly formalizes execution quality via a task-aligned progress potential. We characterize dense robotic evaluation through two axiomatic properties: macro-consistency, which requires additive and path-consistent aggregation, and micro-resolution, which requires sensitivity to fine-grained physical evolution. Under this formulation, potential-based PRM judges provide a natural instantiation of dense evaluation, with macro-consistency following directly from the induced scalar potential. We empirically validate the micro-resolution property using RoboPulse, a diagnostic benchmark specifically designed for probing micro-scale progress discrimination, where several trajectory-trained PRM judges outperform discriminative similarity-based methods and general-purpose foundation-model judges. Finally, leveraging PRM-as-a-Judge and the OPD metric system, we conduct a structured audit of mainstream policy paradigms across long-horizon tasks, revealing behavioral signatures and failure modes that are invisible to outcome-only metrics.

cs.RO↗

cuGenOpt: A GPU-Accelerated General-Purpose Metaheuristic Framework for Combinatorial Optimization

Combinatorial optimization problems arise in logistics, scheduling, and resource allocation, yet existing approaches face a fundamental trade-off among generality, performance, and usability. We present cuGenOpt, a GPU-accelerated general-purpose metaheuristic framework that addresses all three dimensions simultaneously. At the engine level, cuGenOpt adopts a "one block evolves one solution" CUDA architecture with a unified encoding abstraction (permutation, binary, integer), a two-level adaptive operator selection mechanism, and hardware-aware resource management. At the extensibility level, a user-defined operator registration interface allows domain experts to inject problem-specific CUDA search operators. At the usability level, a JIT compilation pipeline exposes the framework as a pure-Python API, and an LLM-based modeling assistant converts natural-language problem descriptions into executable solver code. Experiments across five thematic suites on three GPU architectures (T4, V100, A800) show that cuGenOpt outperforms general MIP solvers by orders of magnitude, achieves competitive quality against specialized solvers on instances up to n=150, and attains 4.73% gap on TSP-442 within 30s. Twelve problem types spanning five encoding variants are solved to optimality. Framework-level optimizations cumulatively reduce pcb442 gap from 36% to 4.73% and boost VRPTW throughput by 75-81%. Code: https://github.com/L-yang-yang/cugenopt

cs.AI↗

Homodyne Detection of Temporally Resolved Quantum States

We present an analysis of the time domain measurement of temporally resolvable quantum states using balanced homodyne detection. Our approach outlines a formalism of detecting quantum states in arbitrary temporal modes via projection of the temporal mode onto a natural detector basis. We then present an algorithm for simulating the resultant photocurrent of continuous homodyne detection in the presence of a temporally resolved mode, and use this algorithm to explore the effects of realistic measurement errors on marginal reconstruction and quantum state tomography. A complete implementation of the method is provided through open source code on a GitHub repository.

quant-ph↗

Translating Flow to Policy via Hindsight Online Imitation

Recent advances in hierarchical robot systems leverage a high-level planner to propose task plans and a low-level policy to generate robot actions. This design allows training the planner on action-free or even non-robot data sources (e.g., videos), providing transferable high-level guidance. Nevertheless, grounding these high-level plans into executable actions remains challenging, especially with the limited availability of high-quality robot data. To this end, we propose to improve the low-level policy through online interactions. Specifically, our approach collects online rollouts, retrospectively annotates the corresponding high-level goals from achieved outcomes, and aggregates these hindsight-relabeled experiences to update a goal-conditioned imitation policy. Our method, Hindsight Flow-conditioned Online Imitation (HinFlow), instantiates this idea with 2D point flows as the high-level planner. Across diverse manipulation tasks in both simulation and physical world, our method achieves more than $2\times$ performance improvement over the base policy, significantly outperforming the existing methods. Moreover, our framework enables policy acquisition from planners trained on cross-embodiment video data, demonstrating its potential for scalable and transferable robot learning.

cs.RO↗

Sound Field Estimation Using Optimal Transport Barycenters in the Presence of Phase Errors

This study introduces a novel approach for estimating plane-wave coefficients in sound field reconstruction, specifically addressing challenges posed by error-in-variable phase perturbations. Such systematic errors typically arise from sensor mis-calibration, including uncertainties in sensor positions and response characteristics, leading to measurement-induced phase shifts in plane wave coefficients. Traditional methods often result in biased estimates or non-convex solutions. To overcome these issues, we propose an optimal transport (OT) framework. This framework operates on a set of lifted non-negative measures that correspond to observation-dependent shifted coefficients relative to the unperturbed ones. By applying OT, the supports of the measures are transported toward an optimal average in the phase space, effectively morphing them into an indistinguishable state. This optimal average, known as barycenter, is linked to the estimated plane-wave coefficients using the same lifting rule. The framework addresses the ill-posed nature of the problem, due to the large number of plane waves, by adding a constant to the ground cost, ensuring the sparsity of the transport matrix. Convex consistency of the solution is maintained. Simulation results confirm that our proposed method provides more accurate coefficient estimations compared to baseline approaches in scenarios with both additive noise and phase perturbations.

eess.SP↗

COLT: Enhancing Video Large Language Models with Continual Tool Usage

The success of Large Language Models (LLMs) has significantly propelled the research of video understanding. To harvest the benefits of well-trained expert models (i.e., tools), video LLMs prioritize the exploration of tool usage capabilities. Existing methods either prompt closed-source LLMs or employ the instruction tuning paradigm for tool-use fine-tuning. These methods, however, assume an established repository of fixed tools and struggle to generalize to real-world environments where tool data is perpetually evolving and streaming in. To this end, we propose to enhance open-source video LLMs with COntinuaL Tool usage (termed COLT), which automatically acquires tool-use ability in a successive tool stream without suffering 'catastrophic forgetting' of the past learned tools. Specifically, our COLT incorporates a learnable tool codebook as a tool-specific memory system. Then relevant tools are dynamically selected based on the similarity between user instruction and tool features within the codebook. To unleash the tool usage potential of video LLMs, we collect a video-centric tool-use instruction tuning dataset VideoToolBench. Extensive experiments on both previous video LLM benchmarks and the tool-use-specific VideoToolBench dataset demonstrate the state-of-the-art performance of our proposed COLT.

cs.CV↗

SaddleScape V1.0: A Python Package for Constructing Solution Landscapes via High-index Saddle Dynamics

We present SaddleScape V1.0, a Python software package designed for the exploration and construction of solution landscapes in complex systems. The package implements the High-index Saddle Dynamics (HiSD) framework and its variants, including the Generalized HiSD for non-gradient systems and the Accelerated HiSD. SaddleScape V1.0 enables the systematic identification of critical points, including both local minima and high-index saddle points, by dynamically updating both the state estimate and an associated subspace characterizing the saddle's local manifold. It supports both gradient systems, defined by energy functions/functionals, and general non-gradient autonomous dynamical systems. Key features include automatic differentiation for symbolic inputs, numerical approximation techniques for Hessian-vector products, diverse eigenvalue solvers, and algorithms for constructing solution landscapes. The software offers a user-friendly interface with flexible parameter configuration, tools for trajectory and landscape visualization, and data export capabilities. By providing an efficient and accessible implementation of advanced saddle dynamics, SaddleScape V1.0 facilitates the construction of solution landscapes, empowering researchers in various scientific disciplines to gain deeper insights into the hierarchical structure of complex systems. The source code is available at the repository https://github.com/HiSDpackage/saddlescape. The package's introductory website is available at https://hisdpackage.github.io/saddlescape.

math.NA↗

Compute-in-Memory Implementation of State Space Models for Event Sequence Processing

State space models (SSMs) have recently emerged as a powerful framework for long sequence processing, outperforming traditional methods on diverse benchmarks. Fundamentally, SSMs can generalize both recurrent and convolutional networks and have been shown to even capture key functions of biological systems. Here we report an approach to implement SSMs in energy-efficient compute-in-memory (CIM) hardware to achieve real-time, event-driven processing. Our work re-parameterizes the model to function with real-valued coefficients and shared decay constants, reducing the complexity of model mapping onto practical hardware systems. By leveraging device dynamics and diagonalized state transition parameters, the state evolution can be natively implemented in crossbar-based CIM systems combined with memristors exhibiting short-term memory effects. Through this algorithm and hardware co-design, we show the proposed system offers both high accuracy and high energy efficiency while supporting fully asynchronous processing for event-based vision and audio tasks.

eess.SP↗

Towards Cross-View Point Correspondence in Vision-Language Models

Cross-view correspondence is a fundamental capability for spatial understanding and embodied AI. However, it is still far from being realized in Vision-Language Models (VLMs), especially in achieving precise point-level correspondence, which is crucial for precise affordance interaction. So we propose the Cross-View Point Correspondence (CVPC) task and CrossPoint-Bench, a comprehensive benchmark with hierarchical design, inspired by the human cognitive process of "perceive", "reason", and "correspond". Our evaluation shows the state-of-the-art models (e.g., Gemini-2.5-Pro) still fall far behind humans, with a gap of over 54.65% in overall accuracy, exposing a challenge in transitioning from coarse-grained judgement to fine-grained coordinate prediction. To address this problem, we construct CrossPoint-378K, a dataset with 378K question-answering pairs across 900 scenes, focused on actionable affordance regions that better reflect real-world manipulation and interaction scenarios. Furthermore, we propose CroPond that trained on the CrossPoint-378K dataset. Our CroPond achieves state-of-the-art performance on CrossPoint-Bench, surpassing Gemini-2.5-Pro by 39.7% accuracy, which offers a foundation for advancing future work on cross-view correspondence. The benchmark, dataset, and model are publicly available at https://github.com/WangYipu2002/CrossPoint.

cs.CV↗

Kunlun Anomaly Troubleshooter: Enabling Kernel-Level Anomaly Detection and Causal Reasoning for Large Model Distributed Inference

Anomaly troubleshooting for large model distributed inference (LMDI) remains a critical challenge. Resolving anomalies such as inference performance degradation or latency jitter in distributed system demands significant manual efforts from domain experts, resulting in extremely time-consuming diagnosis processes with relatively low accuracy. In this paper, we introduce Kunlun Anomaly Troubleshooter (KAT), the first anomaly troubleshooting framework tailored for LMDI. KAT addresses this problem through two core innovations. First, KAT exploits the synchronicity and consistency of GPU workers, innovatively leverages function trace data to precisely detect kernel-level anomalies and associated hardware components at nanosecond resolution. Second, KAT integrates these detection results into a domain-adapted LLM, delivering systematic causal reasoning and natural language interpretation of complex anomaly symptoms. Evaluations conducted in Alibaba Cloud Service production environment indicate that KAT achieves over 0.884 precision and 0.936 recall in anomaly detection, providing detail anomaly insights that significantly narrow down the diagnostic scope and improve both the efficiency and success rate of troubleshooting.

cs.LG↗

StreamSTGS: Streaming Spatial and Temporal Gaussian Grids for Real-Time Free-Viewpoint Video

Streaming free-viewpoint video~(FVV) in real-time still faces significant challenges, particularly in training, rendering, and transmission efficiency. Harnessing superior performance of 3D Gaussian Splatting~(3DGS), recent 3DGS-based FVV methods have achieved notable breakthroughs in both training and rendering. However, the storage requirements of these methods can reach up to $10$MB per frame, making stream FVV in real-time impossible. To address this problem, we propose a novel FVV representation, dubbed StreamSTGS, designed for real-time streaming. StreamSTGS represents a dynamic scene using canonical 3D Gaussians, temporal features, and a deformation field. For high compression efficiency, we encode canonical Gaussian attributes as 2D images and temporal features as a video. This design not only enables real-time streaming, but also inherently supports adaptive bitrate control based on network condition without any extra training. Moreover, we propose a sliding window scheme to aggregate adjacent temporal features to learn local motions, and then introduce a transformer-guided auxiliary training module to learn global motions. On diverse FVV benchmarks, StreamSTGS demonstrates competitive performance on all metrics compared to state-of-the-art methods. Notably, StreamSTGS increases the PSNR by an average of $1$dB while reducing the average frame size to just $170$KB. The code is publicly available on https://github.com/kkkzh/StreamSTGS.

cs.CV↗

ProLLaMA: A Protein Large Language Model for Multi-Task Protein Language Processing

Recent advances in Protein Language Models (PLMs) have transformed protein engineering, yet unlike their counterparts in Natural Language Processing (NLP), current PLMs exhibit a fundamental limitation: they excel in either Protein Language Understanding (PLU) or Protein Language Generation (PLG), but rarely both. This fragmentation hinders progress in protein engineering. To bridge this gap, we introduce ProLLaMA, a multitask protein language model enhanced by the Evolutionary Protein Generation Framework (EPGF). We construct a comprehensive instruction dataset containing approximately 13 million samples with over 11,000 superfamily annotations to facilitate better modeling of sequence-function landscapes. We leverage a two-stage training approach to develop ProLLaMA, a multitask LLM with protein domain expertise. Our EPGF addresses the mismatch between statistic language modeling and biological constraints through three innovations: a multi-dimensional interpretable scorer, hierarchical efficient decoding, and a probabilistic-biophysical joint selection mechanism. Extensive experiments demonstrate that ProLLaMA excels in both unconditional and controllable protein generation tasks, achieving superior structural quality metrics compared to existing PLMs. Additionally, ProLLaMA demonstrates strong understanding capabilities with a 67.1% exact match rate in superfamily prediction. EPGF significantly enhances the biological viability of generated sequences, as evidenced by improved biophysical scores (+4.3%) and structural metrics (+14.5%). The project is available at https://github.com/PKU-YuanGroup/ProLLaMA.

cs.CE↗

VisualTrans: A Benchmark for Real-World Visual Transformation Reasoning

Visual transformation reasoning (VTR) is a vital cognitive capability that empowers intelligent agents to understand dynamic scenes, model causal relationships, and predict future states, and thereby guiding actions and laying the foundation for advanced intelligent systems. However, existing benchmarks suffer from a sim-to-real gap, limited task complexity, and incomplete reasoning coverage, limiting their practical use in real-world scenarios. To address these limitations, we introduce VisualTrans, the first comprehensive benchmark specifically designed for VTR in real-world human-object interaction scenarios. VisualTrans encompasses 12 semantically diverse manipulation tasks and systematically evaluates three essential reasoning dimensions - spatial, procedural, and quantitative - through 6 well-defined subtask types. The benchmark features 472 high-quality question-answer pairs in various formats, including multiple-choice, open-ended counting, and target enumeration. We introduce a scalable data construction pipeline built upon first-person manipulation videos, which integrates task selection, image pair extraction, automated metadata annotation with large multimodal models, and structured question generation. Human verification ensures the final benchmark is both high-quality and interpretable. Evaluations of various state-of-the-art vision-language models show strong performance in static spatial tasks. However, they reveal notable shortcomings in dynamic, multi-step reasoning scenarios, particularly in areas like intermediate state recognition and transformation sequence planning. These findings highlight fundamental weaknesses in temporal modeling and causal reasoning, providing clear directions for future research aimed at developing more capable and generalizable VTR systems. The dataset and code are available at https://github.com/WangYipu2002/VisualTrans.

cs.CV↗