arXiv subjects

Yuzhe Xiao

Publications and source records attributed to Yuzhe Xiao.

At least 19 recordsLinked to original sources

arXiv2026

Transient Depth Thermography for Probing Heat Transport

Directly probing heat propagation inside materials remains challenging because conventional measurements are predominantly sensitive to surface temperature. Depth thermography has enabled non-contact reconstruction of subsurface temperature profiles from spectrally resolved thermal radiation under steady-state conditions. Here, we extend this approach into the time domain, establishing transient depth thermography to resolve the evolution of internal temperature during heat transport. By exploiting wavelength-dependent optical penetration depth, time-resolved thermal-radiation spectra provide access to temperature as a function of both depth and time. Tracking this spatiotemporal temperature field enables direct probing of heat propagation and quantitative determination of out-of-plane thermal conductivity and interfacial thermal resistance. We demonstrate the approach in fused silica, obtaining thermal conductivity within 2% of established values, and measure the temperature-dependent thermal conductivity of MgF2 over a broad temperature range where existing data are sparse and inconsistent. Numerical simulations further demonstrate its extension to multilayer thin films for probing interfacial thermal resistance. By extending depth-resolved thermal spectroscopy from steady-state to transient heat transport, this work establishes a new optical route for non-contact characterization of thermal dynamics in bulk and layered materials.

physics.optics↗

arXiv2026

Temporal Evolution of Blackbody Radiation in a One-Dimensional Photonic Time-Crystal

One of the most intriguing phenomena in time varying-media photonics is the amplification of light in a photonic time crystal (PTC). However, studies to date have focused exclusively on PTC-based amplification of coherent light. Here, we theoretically investigate the PTC-based amplification of thermal radiation, specifically blackbody radiation. Such amplification is not only fundamentally intriguing due to the thermal radiation's stochastic nature, but also technologically relevant because thermal radiation's ubiquity, which implies that its amplification generally accompanies that of coherent radiation. For simplicity, and due to the experimental relevance of PTC amplification in transmission lines, we consider amplification in a one-dimensional medium. To analyze the amplification of blackbody radiation in a PTC, we examine the electromagnetic fields' spatial correlations and spatial spectra. We show that the spatial spectra of initially blackbody radiation converge periodically toward Gaussian profiles with progressively increasing amplitudes, coherence lengths, and spatial- and wavenumber-domain purities. We demonstrate that these asymptotic behaviors are governed by the PTC momentum band structure and can be understood using a rotating-wave approximation for the pseudo-Hermitian dynamics of the electromagnetic field in a PTC. Beyond revealing the fundamental evolution of thermal radiation in time-varying media, our numerical framework provides a general approach for analyzing the dynamics of stochastic electromagnetic fields in PTCs and time-varying media, in general. The results also provide physical insight and practical guidance for the design of PTC-based amplifiers, where the concurrent amplification of parasitic thermal radiation may occur.

physics.optics↗

arXiv2026

Silicon-on-sapphire metasurfaces generate arrays of dark and bright traps for neutral atoms

We demonstrated crystalline silicon-on-sapphire (c-SOS) metasurfaces that convert a Gaussian beam into arrays of complex optical traps, including arrays of optical bottle beams that trap atoms in dark regions interleaved with bright tweezer arrays. The high refractive index and indirect band gap of crystalline silicon makes it possible to design high-resolution near-infrared ($λ>700$ nm) metasurfaces that can be manufactured at scale using CMOS-compatible processes. Compared with active components like spatial light modulators (SLMs) that have become widely used to generate trap arrays, metasurfaces provide an indefinitely scalable number of pixels, enabling large arrays of complex traps in a very small form factor, as well as reduced dynamic noise. To design metasurfaces that can generate three-dimensional bottle beams to serve as dark traps, we modified the Gerchberg-Saxton algorithm to enforce complex-amplitude profiles at the focal plane of the metasurface and to optimize the uniformity of the traps across the array. We fabricated and measured c-SOS metasurfaces that convert a Gaussian laser beam into arrays of bright traps, dark traps, and interleaved bright/dark traps.

physics.optics↗

arXiv2025

Accurate Depth-Resolved Temperature Profiling via Thermal-Radiation Spectroscopy: Numerical Methods vs Machine Learning

We present and compare three approaches for accurately retrieving depth-resolved temperature distributions within materials from their thermal-radiation spectra, based on: (1) a nonlinear equation solver implemented in commercial software, (2) a custom-built nonlinear equation solver, and (3) a deep neural network (DNN) model. These methods are first validated using synthetic datasets comprising randomly generated temperature profiles and corresponding noisy thermal-radiation spectra for three different structures: a fused-silica substrate, an indium antimonide substrate, and a thin-film gallium nitride layer on a sapphire substrate. We then assess the performance of each approach using experimental spectra collected from a fused-silica window heated on a temperature-controlled stage. Our results demonstrate that the DNN-based method consistently outperforms conventional numerical techniques on both synthetic and experimental data, providing a robust solution for accurate depth-resolved temperature profiling.

physics.optics↗

arXiv2025

Self-referencing photothermal common-path interferometry to measure absorption of Si3N4 membranes for laser-light sails

Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled by high-intensity lasers. We investigated the near-infrared absorption of free-standing membranes of stoichiometric silicon nitride (Si$_3$N$_4$), a candidate sail material. To resolve the small but non-zero optical loss, we used photothermal common-path interferometry (PCI), for which we developed a self-referencing modality where a PCI measurement is performed twice: once on a bare membrane, and a second time with monolayer graphene deposited on the membrane. The graphene increases the absorption of the sample by orders of magnitude, such that it can be measured by ellipsometry, without significantly affecting the thermal properties. We measured the absorption coefficient of Si$_3$N$_4$ to be (1.5-3) $\times$ 10$^{-2}$ cm$^{-1}$ at 1064 nm, making it a suitable sail material for laser intensities as high as ~10 GW/m$^2$. By comparison, silicon-rich "low stress" SiN$_x$ (x~1), with a measured absorption coefficient of approximately 8 cm$^{-1}$, is unlikely to survive such high laser intensities. Our self-referencing technique enables testing of low-loss membranes of various materials for laser sails and other applications.

physics.optics↗

arXiv2022

Lateral beam shifts and depolarization upon oblique reflection from dielectric mirrors

Dielectric mirrors comprising thin-film multilayers are widely used in optical experiments because they can achieve substantially higher reflectance compared to metal mirrors. Here we investigate potential problems that can arise when dielectric mirrors are used at oblique incidence, in particular for focused beams. We found that light beams reflected from dielectric mirrors can experience lateral beam shifts, beam-shape distortion, and depolarization, and these effects have a strong dependence on wavelength, incident angle, and incident polarization. Because vendors of dielectric mirrors typically do not share the particular layer structure of their products, we designed and simulated several dielectric-mirror stacks, and then also measured the lateral beam shift from two commercial dielectric mirrors and one coated metal mirror. We hope that this paper brings awareness of the tradeoffs between dielectric mirrors and front-surface metal mirrors in certain optics experiments, and suggest that vendors of dielectric mirrors provide information about beam shifts, distortion, and depolarization when their products are used at oblique incidence.

physics.optics↗

arXiv2022

Tuning carrier density and phase transitions in oxide semiconductors using focused ion beams

We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable doping of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subsequent thermal annealing, we defect-engineered a correlated semiconductor, vanadium dioxide (VO2), locally modifying its insulator-to-metal transition (IMT) temperature by range of ~25 degrees C. Such area-selective modification of metal oxides by direct writing using a FIB provides a simple, mask-less route to the fabrication of optical structures, especially when multiple or continuous levels of doping or defect density are required.

cond-mat.mtrl-sci↗

arXiv2022

Wavelength-by-wavelength temperature-independent thermal radiation utilizing an insulator-metal transition

Both the magnitude and spectrum of the blackbody-radiation distribution change with temperature. Here, we designed the temperature-dependent spectral emissivity of a coating to counteract all the changes in the blackbody-radiation distribution over a certain temperature range, enabled by the nonhysteretic insulator-to-metal phase transition of SmNiO3. At each wavelength within the long-wave infrared atmospheric-transparency window, the thermal radiance of our coating remains nearly constant over a temperature range of at least 20 °C. Our approach can conceal thermal gradients and transient temperature changes from infrared imaging systems, including those that discriminate by wavelength, such as multispectral and hyperspectral cameras.

physics.optics↗

arXiv2021

Switchable induced-transmission filters enabled by vanadium dioxide

Abstract: An induced-transmission filter (ITF) uses an ultrathin layer of metal positioned at an electric-field node within a dielectric thin-film bandpass filter to select one transmission band while suppressing other transmission bands that would have been present without the metal layer. Here, we introduce a switchable mid-infrared ITF where the metal film can be "switched on and off", enabling the modulation of the filter response from single-band to multiband. The switching is enabled by a deeply subwavelength film of vanadium dioxide (VO2), which undergoes a reversible insulator-to-metal phase transition. We designed and experimentally demonstrated an ITF that can switch between two states: one broad passband across the long-wave infrared (LWIR, 8 - 12 um) and one narrow passband at ~8.8 um. Our work generalizes the ITF -- previously a niche type of bandpass filter -- into a new class of tunable devices. Furthermore, our unique fabrication process -- which begins with thin-film VO2 on a suspended membrane -- enables the integration of VO2 into any thin-film assembly that is compatible with physical vapor deposition (PVD) processes, and is thus a new platform for realizing tunable thin-film filters.

physics.optics↗

arXiv2021

Efficient generation of optical bottle beams

Optical bottle beams can be used to trap atoms and small low-index particles. We introduce a figure of merit for optical bottle beams, specifically in the context of optical traps, and use it to compare optical bottle-beam traps obtained by three different methods. Using this figure of merit and an optimization algorithm, we identified optical bottle-beam traps based on a Gaussian beam illuminating a metasurface that are superior in terms of power efficiency than existing approaches. We numerically demonstrate a silicon metasurface for creating an optical bottle-beam trap.

physics.optics↗

arXiv2021

Planck spectroscopy

All spectrometers rely on some mechanism to achieve spectral selectivity; common examples include gratings, prisms, and interferometers with moving mirrors. We experimentally demonstrated and validated a spectroscopic technique -- here dubbed Planck spectroscopy -- that measures the spectral emissivity of a surface using only a temperature-controlled stage and a detector, without any wavelength-selective optical components. Planck spectroscopy involves the measurement of temperature-dependent thermally emitted power, where the spectral selectivity is realized via the temperature- and wavelength dependence of Planck's law. We experimentally demonstrated and validated Planck spectroscopy in the mid infrared, for wavelengths from 3 to 13 um -- limited primarily by the bandwidth of our detector -- with resolution of approximately 1 um. The minimalistic setup of Planck spectroscopy can be implemented using infrared cameras to achieve low-cost infrared hyperspectral imaging and imaging ellipsometry.

physics.optics↗

arXiv2020

Hyperspectral interference tomography of nacre

Structural characterization of biologically formed materials is essential for understanding biological phenomena and their environment, and generating new bio-inspired engineering concepts. For example, nacre -- formed by mollusks in the ocean -- encodes local environmental conditions throughout its formation and has exceptional strength due to its nanoscale brick-and-mortar structure. This layered structure, comprising transparent aragonite tablets bonded with an ultra-thin organic polymer, also results in stunning interference colors. Existing methods of structural characterization of nacre rely on some form of cross-sectional analysis, such as scanning electron microscopy or polarization-dependent imaging contrast (PIC) mapping. However, these techniques are destructive and too time- and resource-intensive to analyze large sample areas. Here we present an all-optical, rapid, and non-destructive imaging technique -- hyperspectral interference tomography (HIT) -- to spatially map the structural parameters of nacre and other disordered layered materials. We combined hyperspectral imaging with optical-interference modeling to infer the mean tablet thickness and disordering of nacre layers across entire mollusk shells at various stages of development, observing a previously unknown relationship between the growth of the mollusk and tablet thickness. Our rapid, inexpensive, and nondestructive method can be readily applied to in-field studies.

physics.optics↗

arXiv2020

Adjoint-optimized nanoscale light extractor for nitrogen-vacancy centers in diamond

We designed a nanoscale light extractor (NLE) for efficient outcoupling and beaming of broadband light emitted by shallow, negatively charged nitrogen-vacancy (NV) centers in bulk diamond. The NLE consists of a patterned silicon layer on diamond and requires no etching of the diamond surface. Our design process is based on adjoint optimization using broadband time-domain simulations and yields structures that are inherently robust to positioning and fabrication errors. Our NLE functions like a transmission antenna for the NV center, enhancing the optical power extracted from an NV center positioned 10 nm below the diamond surface by a factor of more than 35, and beaming the light into a +/-30° cone in the far field. This approach to light extraction can be readily adapted to other solid-state color centers.

physics.optics↗

arXiv2020

Ultrathin broadband reflective optical limiter

Optical limiters are nonlinear devices that feature decreasing transmittance with increasing incident optical intensity, and thus can protect sensitive components from high-intensity illumination. The ideal optical limiter reflects rather than absorbs light in its active ("limiting") state, minimizing risk of damage to the limiter itself. Previous efforts to realize reflective limiters were based on embedding nonlinear layers into relatively thick multilayer photonic structures, resulting in substantial fabrication complexity, reduced speed and, in some instances, limited working bandwidth. We overcome these tradeoffs by using the insulator-to-metal transition in vanadium dioxide (VO2) to achieve intensity-dependent modulation of resonant transmission through aperture antennas. Due to the dramatic change of optical properties across the insulator-to-metal transition, low-quality-factor resonators were sufficient to achieve high on-off ratios in device transmittance. As a result, our ultra-thin reflective limiter (thickness ~1/100 of the free-space wavelength) is broadband in terms of operating wavelength (> 2 um at 10 um) and angle of incidence (up to ~50$°$ away from the normal).

physics.optics↗

arXiv2019

Guidelines for measurement of thermal emission

Thermal emission is the radiation of electromagnetic waves from hot objects. The promise of thermal-emission engineering for applications in energy harvesting, radiative cooling, and thermal camouflage has recently led to renewed research interest in this topic. There is a substantial need for accurate and precise measurement of thermal emission in a laboratory setting, which can be challenging in part due to the presence of background emission from the surrounding environment and the measurement instrument itself. This is especially true for measurements of emitters at temperatures close to that of the environment, where the impact of background emission is relatively large. In this paper, we describe, recommend, and demonstrate general procedures for thermal-emission measurements that are applicable to most experimental conditions, including less-common and more-challenging cases that include thermal emitters with temperature-dependent emissivity and emitters that are not in thermal equilibrium.

physics.optics↗

arXiv2019

Wide-angle spectrally selective absorbers and thermal emitters based on inverse opals

Engineered optical absorbers are of substantial interest for applications ranging from stray light reduction to energy conversion. We demonstrate a large-area (centimeter-scale) metamaterial that features near-unity frequency-selective absorption in the mid-infrared wavelength range. The metamaterial comprises a self-assembled porous structure known as an inverse opal, here made of silica. The structure's large volume fraction of voids, together with the vibrational resonances of silica in the mid-infrared spectral range, reduce the metamaterial's refractive index to close to that of air and introduce considerable optical absorption. As a result, the frequency-selective structure efficiently absorbs incident light of both polarizations even at very oblique incidence angles. The absorber remains stable at high temperatures (measured up to ~900 degrees C), enabling its operation as a frequency-selective thermal emitter. The excellent performance of this absorber/emitter and ease of fabrication make it a promising surface coating for passive radiative cooling, laser safety, and other large-area applications.

physics.optics↗

arXiv2019

Temperature-independent thermal radiation

Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin thermal emitters that violate this one-to-one relationship via the use of samarium nickel oxide (SmNiO3), a strongly correlated quantum material that undergoes a fully reversible, temperature-driven solid-state phase transition. The smooth and hysteresis-free nature of this unique insulator-to-metal (IMT) phase transition allows us to engineer the temperature dependence of emissivity to precisely cancel out the intrinsic blackbody profile described by the Stefan-Boltzmann law, for both heating and cooling. Our design results in temperature-independent thermally emitted power within the long-wave atmospheric transparency window (wavelengths of 8 - 14 um), across a broad temperature range of ~30 °C, centered around ~120 °C. The ability to decouple temperature and thermal emission opens a new gateway for controlling the visibility of objects to infrared cameras and, more broadly, new opportunities for quantum materials in controlling heat transfer.

physics.optics↗

arXiv2019

Depth thermography: non-invasive 3D temperature profiling using infrared thermal emission

We introduce a technique based on infrared thermal emission, termed depth thermography, that can remotely measure the temperature distribution beneath the surface of certain objects. Depth thermography utilizes the thermal-emission spectrum in the semitransparent spectral region of the target object to extract its temperature as a function of depth, in contrast with conventional thermography, which uses the spectrally integrated thermally emitted power to measure the surface temperature. Coupled with two-dimensional imaging, e.g., using an infrared hyperspectral camera or scanning a single-pixel spectrometer, this technique can yield volumetric temperature distributions. We carried out a proof-of-concept experiment on an asymmetrically heated fused-silica window, extracting the temperature distribution throughout the sample. Depth thermography may enable noncontact volumetric temperature measurements of microscopic objects such as multilayer electronic devices or macroscopic volumes of liquids and gasses as well as simultaneous all-optical measurements of optical and thermal properties.

physics.optics↗