arXiv subjects

Yuzhu Sun

Publications and source records attributed to Yuzhu Sun.

13 recordsLinked to original sources

arXiv2025

AVID: Formation and evolution of a coalesced major merger of late-type dwarf galaxies (VCC 479) on the outskirts of the Virgo cluster

Dwarf-dwarf galaxy mergers are among the least explored aspects of dwarf galaxy pre-processing as they fall into clusters. We present the first case study of a coalesced late-type dwarf major merger (VCC 479; stellar mass $\sim\,8\,\times\,10^7\,\rm M_\odot$) that has undergone significant environmental influence, with the aim of exploring dwarf galaxy evolution under the combined effects of galaxy interactions and environmental processes, and understanding its relevance to the diversity of dwarf galaxies in cluster environments. Our analysis is based on VLA and FAST HI emission line mapping from the Atomic gas in Virgo Interacting Dwarf galaxies (AVID) survey. We also perform idealized hydrodynamical simulations of dwarf-dwarf mergers to help interpret the observations. We identify symmetric stellar shell structures in VCC 479, indicative of a coalesced major merger of dwarf galaxies. The galaxy features a central starburst, initiated $\sim$600 Myr ago, embedded within an exponential disk quenched $\sim$1 Gyr ago. The starburst contributes only 2.9$\pm$0.5\% of the total stellar mass, and VCC 479's global star formation rate is 0.3 dex lower than typical dwarfs of similar mass. The galaxy is highly HI deficient, with most HI gas concentrated within the central 1 kpc and little extended HI envelope. The misalignment of the HI velocity field with the stellar body is best explained by merger-triggered gas inflow, as seen in our simulations. Our analysis is consistent with a scenario that the majority of HI gas of the progenitor galaxies was removed by the cluster environment prior to the final coalescence. The merger concentrates the remaining gas toward the galaxy center, triggering a central starburst. The combined effect of environment stripping and galaxy merger has transformed VCC 479 into a blue-core dwarf undergoing morphological transition from a late-type to an early-type galaxy.

astro-ph.GA↗

arXiv2024

Enhancing Mobile Robot Navigation Safety and Efficiency through NMPC with Relaxed CBF in Dynamic Environments

In this paper, a safety-critical control strategy for a nonholonomic robot is developed to generate control signals that result in optimal, obstacle-free paths through dynamic environments. We formulate the control synthesis problem as an Optimal Control Problem (OCP) that enforces Control Lyapunov Function (CLF) constraints for system stability as well as safety-critical constraints using Control Barrier Function (CBF) with a relaxing decay rate of the barrier function. A Nonlinear Model Predictive Control (NMPC) integrates with CLF and CBF to ensure system safety and facilitate optimal performance within a short prediction horizon, reducing the computational burden in real-time implementation. Additionally, we incorporate an obstacle avoidance constraint based on the Euclidean norm into the NMPC framework, showcasing the CBF approach's superiority in addressing mobile robotic systems' point stabilisation and trajectory tracking challenges. Through extensive simulations, the proposed controller demonstrates proficiency in static and dynamic obstacle avoidance under various scenarios. Experimental validations conducted using the Husky A200 robot align with simulation results, reinforcing the applicability of our proposed approach in real-world scenarios, notably improving the computational efficiency and safety in practical mobile robot applications.

eess.SY↗

arXiv2024

A Twin Delayed Deep Deterministic Policy Gradient Algorithm for Autonomous Ground Vehicle Navigation via Digital Twin Perception Awareness

Autonomous ground vehicle (UGV) navigation has the potential to revolutionize the transportation system by increasing accessibility to disabled people, ensure safety and convenience of use. However, UGV requires extensive and efficient testing and evaluation to ensure its acceptance for public use. This testing are mostly done in a simulator which result to sim2real transfer gap. In this paper, we propose a digital twin perception awareness approach for the control of robot navigation without prior creation of the virtual environment (VT) environment state. To achieve this, we develop a twin delayed deep deterministic policy gradient (TD3) algorithm that ensures collision avoidance and goal-based path planning. We demonstrate the performance of our approach on different environment dynamics. We show that our approach is capable of efficiently avoiding collision with obstacles and navigating to its desired destination, while at the same time safely avoids obstacles using the information received from the LIDAR sensor mounted on the robot. Our approach bridges the gap between sim-to-real transfer and contributes to the adoption of UGVs in real world. We validate our approach in simulation and a real-world application in an office space.

cs.RO↗

arXiv2024

Digital Twin-Driven Reinforcement Learning for Obstacle Avoidance in Robot Manipulators: A Self-Improving Online Training Framework

The evolution and growing automation of collaborative robots introduce more complexity and unpredictability to systems, highlighting the crucial need for robot's adaptability and flexibility to address the increasing complexities of their environment. In typical industrial production scenarios, robots are often required to be re-programmed when facing a more demanding task or even a few changes in workspace conditions. To increase productivity, efficiency and reduce human effort in the design process, this paper explores the potential of using digital twin combined with Reinforcement Learning (RL) to enable robots to generate self-improving collision-free trajectories in real time. The digital twin, acting as a virtual counterpart of the physical system, serves as a 'forward run' for monitoring, controlling, and optimizing the physical system in a safe and cost-effective manner. The physical system sends data to synchronize the digital system through the video feeds from cameras, which allows the virtual robot to update its observation and policy based on real scenarios. The bidirectional communication between digital and physical systems provides a promising platform for hardware-in-the-loop RL training through trial and error until the robot successfully adapts to its new environment. The proposed online training framework is demonstrated on the Unfactory Xarm5 collaborative robot, where the robot end-effector aims to reach the target position while avoiding obstacles. The experiment suggest that proposed framework is capable of performing policy online training, and that there remains significant room for improvement.

cs.RO↗

arXiv2023

Adaptive Safety-critical Control with Uncertainty Estimation for Human-robot Collaboration

In advanced manufacturing, strict safety guarantees are required to allow humans and robots to work together in a shared workspace. One of the challenges in this application field is the variety and unpredictability of human behavior, leading to potential dangers for human coworkers. This paper presents a novel control framework by adopting safety-critical control and uncertainty estimation for human-robot collaboration. Additionally, to select the shortest path during collaboration, a novel quadratic penalty method is presented. The innovation of the proposed approach is that the proposed controller will prevent the robot from violating any safety constraints even in cases where humans move accidentally in a collaboration task. This is implemented by the combination of a time-varying integral barrier Lyapunov function (TVIBLF) and an adaptive exponential control barrier function (AECBF) to achieve a flexible mode switch between path tracking and collision avoidance with guaranteed closed-loop system stability. The performance of our approach is demonstrated in simulation studies on a 7-DOF robot manipulator. Additionally, a comparison between the tasks involving static and dynamic targets is provided.

cs.RO↗

arXiv2023

Fixed-time Adaptive Neural Control for Physical Human-Robot Collaboration with Time-Varying Workspace Constraints

Physical human-robot collaboration (pHRC) requires both compliance and safety guarantees since robots coordinate with human actions in a shared workspace. This paper presents a novel fixed-time adaptive neural control methodology for handling time-varying workspace constraints that occur in physical human-robot collaboration while also guaranteeing compliance during intended force interactions. The proposed methodology combines the benefits of compliance control, time-varying integral barrier Lyapunov function (TVIBLF) and fixed-time techniques, which not only achieve compliance during physical contact with human operators but also guarantee time-varying workspace constraints and fast tracking error convergence without any restriction on the initial conditions. Furthermore, a neural adaptive control law is designed to compensate for the unknown dynamics and disturbances of the robot manipulator such that the proposed control framework is overall fixed-time converged and capable of online learning without any prior knowledge of robot dynamics and disturbances. The proposed approach is finally validated on a simulated two-link robot manipulator. Simulation results show that the proposed controller is superior in the sense of both tracking error and convergence time compared with the existing barrier Lyapunov functions based controllers, while simultaneously guaranteeing compliance and safety.

cs.RO↗

arXiv2023

Distributed Fixed-Time Consensus Control for Multiple AUV Systems with Input Saturations

This study proposes a new distributed control method based on an adaptive fuzzy control for multiple collaborative autonomous underwater vehicles (AUVs) to track a desired formation shape within a fixed time. First, a formation control protocol based on a fixed-time backstepping sliding mode control is designed, in which the consensus cooperative tracking errors for each AUV will be formulated. Then, to compensate for the saturated control torques, an adaptive auxiliary variable is introduced. Finally, a fixed-time adaptive fuzzy logic control (FLC) is derived to approximate the unknown dynamics, in which the adaptive laws of the FLC is derived such that the adaptive signals and errors can be convergent within a fixed time. The fixed time convergence is desired in practice because it provides an exciting property that the global convergence of the whole system is independent with the initial states of the AUVs. The computer simulation results for a consensus formation control of four AUVs show that the proposed formation control can provide high tracking performance with lower and smoother control efforts

eess.SY↗

arXiv2022

Reinforcement Learning-Enhanced Control Barrier Functions for Robot Manipulators

In this paper we present the implementation of a Control Barrier Function (CBF) using a quadratic program (QP) formulation that provides obstacle avoidance for a robotic manipulator arm system. CBF is a control technique that has emerged and developed over the past decade and has been extensively explored in the literature on its mathematical foundations, proof of set invariance and potential applications for a variety of safety-critical control systems. In this work we will look at the design of CBF for the robotic manipulator obstacle avoidance, discuss the selection of the CBF parameters and present a Reinforcement Learning (RL) scheme to assist with finding parameters values that provide the most efficient trajectory to successfully avoid different sized obstacles. We then create a data-set across a range of scenarios used to train a Neural-Network (NN) model that can be used within the control scheme to allow the system to efficiently adapt to different obstacle scenarios. Computer simulations (based on Matlab/Simulink) demonstrate the effectiveness of the proposed algorithm.

cs.RO↗

arXiv2022

Adaptive Admittance Control for Safety-Critical Physical Human Robot Collaboration

Physical human-robot collaboration requires strict safety guarantees since robots and humans work in a shared workspace. This letter presents a novel control framework to handle safety-critical position-based constraints for human-robot physical interaction. The proposed methodology is based on admittance control, exponential control barrier functions (ECBFs) and quadratic program (QP) to achieve compliance during the force interaction between human and robot, while simultaneously guaranteeing safety constraints. In particular, the formulation of admittance control is rewritten as a second-order nonlinear control system, and the interaction forces between humans and robots are regarded as the control input. A virtual force feedback for admittance control is provided in real-time by using the ECBFs-QP framework as a compensator of the external human forces. A safe trajectory is therefore derived from the proposed adaptive admittance control scheme for a low-level controller to track. The innovation of the proposed approach is that the proposed controller will enable the robot to comply with human forces with natural fluidity without violation of any safety constraints even in cases where human external forces incidentally force the robot to violate constraints. The effectiveness of our approach is demonstrated in simulation studies on a two-link planar robot manipulator.

cs.RO↗

arXiv2022

Fixed-time Integral Sliding Mode Control for Admittance Control of a Robot Manipulator

This paper proposes a novel fixed-time integral sliding mode controller for admittance control to enhance physical human-robot collaboration. The proposed method combines the benefits of compliance to external forces of admittance control and high robustness to uncertainties of integral sliding mode control (ISMC), such that the system can collaborate with a human partner in an uncertain environment effectively. Firstly, a fixed-time sliding surface is applied in the ISMC to make the tracking error of the system converge within a fixed-time regardless of the initial condition. Then, a fixed-time backstepping controller (BSP) is integrated into the ISMC as the nominal controller to realize global fixed-time convergence. Furthermore, to overcome the singularity problem, a non-singular fixed-time sliding surface is designed and integrated into the controller, which is useful for practical application. Finally, the proposed controller is validated for a two-link robot manipulator with uncertainties and external human forces. The results show that the proposed controller is superior in the sense of both tracking error and convergence time, and at the same time, can comply with human motion in a shared workspace.

cs.RO↗

arXiv2020

FNA++: Fast Network Adaptation via Parameter Remapping and Architecture Search

Deep neural networks achieve remarkable performance in many computer vision tasks. Most state-of-the-art (SOTA) semantic segmentation and object detection approaches reuse neural network architectures designed for image classification as the backbone, commonly pre-trained on ImageNet. However, performance gains can be achieved by designing network architectures specifically for detection and segmentation, as shown by recent neural architecture search (NAS) research for detection and segmentation. One major challenge though is that ImageNet pre-training of the search space representation (a.k.a. super network) or the searched networks incurs huge computational cost. In this paper, we propose a Fast Network Adaptation (FNA++) method, which can adapt both the architecture and parameters of a seed network (e.g. an ImageNet pre-trained network) to become a network with different depths, widths, or kernel sizes via a parameter remapping technique, making it possible to use NAS for segmentation and detection tasks a lot more efficiently. In our experiments, we apply FNA++ on MobileNetV2 to obtain new networks for semantic segmentation, object detection, and human pose estimation that clearly outperform existing networks designed both manually and by NAS. We also implement FNA++ on ResNets and NAS networks, which demonstrates a great generalization ability. The total computation cost of FNA++ is significantly less than SOTA segmentation and detection NAS approaches: 1737x less than DPC, 6.8x less than Auto-DeepLab, and 8.0x less than DetNAS. A series of ablation studies are performed to demonstrate the effectiveness, and detailed analysis is provided for more insights into the working mechanism. Codes are available at https://github.com/JaminFong/FNA.

cs.CV↗

arXiv2020

Densely Connected Search Space for More Flexible Neural Architecture Search

Neural architecture search (NAS) has dramatically advanced the development of neural network design. We revisit the search space design in most previous NAS methods and find the number and widths of blocks are set manually. However, block counts and block widths determine the network scale (depth and width) and make a great influence on both the accuracy and the model cost (FLOPs/latency). In this paper, we propose to search block counts and block widths by designing a densely connected search space, i.e., DenseNAS. The new search space is represented as a dense super network, which is built upon our designed routing blocks. In the super network, routing blocks are densely connected and we search for the best path between them to derive the final architecture. We further propose a chained cost estimation algorithm to approximate the model cost during the search. Both the accuracy and model cost are optimized in DenseNAS. For experiments on the MobileNetV2-based search space, DenseNAS achieves 75.3% top-1 accuracy on ImageNet with only 361MB FLOPs and 17.9ms latency on a single TITAN-XP. The larger model searched by DenseNAS achieves 76.1% accuracy with only 479M FLOPs. DenseNAS further promotes the ImageNet classification accuracies of ResNet-18, -34 and -50-B by 1.5%, 0.5% and 0.3% with 200M, 600M and 680M FLOPs reduction respectively. The related code is available at https://github.com/JaminFong/DenseNAS.

cs.CV↗

arXiv2020

Fast Neural Network Adaptation via Parameter Remapping and Architecture Search

Deep neural networks achieve remarkable performance in many computer vision tasks. Most state-of-the-art (SOTA) semantic segmentation and object detection approaches reuse neural network architectures designed for image classification as the backbone, commonly pre-trained on ImageNet. However, performance gains can be achieved by designing network architectures specifically for detection and segmentation, as shown by recent neural architecture search (NAS) research for detection and segmentation. One major challenge though, is that ImageNet pre-training of the search space representation (a.k.a. super network) or the searched networks incurs huge computational cost. In this paper, we propose a Fast Neural Network Adaptation (FNA) method, which can adapt both the architecture and parameters of a seed network (e.g. a high performing manually designed backbone) to become a network with different depth, width, or kernels via a Parameter Remapping technique, making it possible to utilize NAS for detection/segmentation tasks a lot more efficiently. In our experiments, we conduct FNA on MobileNetV2 to obtain new networks for both segmentation and detection that clearly out-perform existing networks designed both manually and by NAS. The total computation cost of FNA is significantly less than SOTA segmentation/detection NAS approaches: 1737$\times$ less than DPC, 6.8$\times$ less than Auto-DeepLab and 7.4$\times$ less than DetNAS. The code is available at https://github.com/JaminFong/FNA.

cs.CV↗