SearcharxivSearch

arXiv subjects

Z. Lockman

Publications and source records attributed to Z. Lockman.

5 recordsLinked to original sources

Improved Current Densities in MgB2 By Liquid-Assisted Sintering

Polycrystalline MgB2 samples with GaN additions were prepared by reaction of Mg, B, and GaN powders. The presence of Ga leads to a low melting eutectic phase which allowed liquid phase sintering and produces plate-like grains. For low-level GaN additions (5% at. % or less), the critical transition temperature, Tc, remained unchanged and in 1T magnetic field, the critical current density, Jc was enhanced by a factor of 2 and 10, for temperatures of \~5K and 20K, respectively. The values obtained are approaching those of hot isostatically pressed samples.

cond-mat.supr-con

Effective Vortex Pinning in MgB2 thin films

We discuss pinning properties of MgB2 thin films grown by pulsed-laser deposition (PLD) and by electron-beam (EB) evaporation. Two mechanisms are identified that contribute most effectively to the pinning of vortices in randomly oriented films. The EB process produces low defected crystallites with small grain size providing enhanced pinning at grain boundaries without degradation of Tc. The PLD process produces films with structural disorder on a scale less that the coherence length that further improves pinning, but also depresses Tc.

cond-mat.supr-con

The structure of the superconducting gap in MgB2 from point-contact spectroscopy

We have studied the structure of the superconducting gap in MgB2 thin films by means of point-contact spectroscopy using a gold tip. The films were produced by depositing pure boron on a sapphire substrate, using e-beam evaporation, followed by reaction with magnesium vapour. The films have a Tc of 38.6 +- 0.3 K and resistivity of about 20 microOhm cm at 40 K. The point-contact spectra prove directly the existence of a multi-valued order parameter in MgB2, with two distinct values of the gap, DELTA1=2.3+-0.3 meV and DELTA2=6.2+-0.7 meV at 4.2 K. Analysis of the spectra in terms of the Blonder-Tinkham-Klapwijk model reveals that both gaps close simultaneously at the Tc of the film. Possible mechanisms that can explain the intrinsic co-existence of two values of the gap are discussed.

cond-mat.supr-con

Microwave Power, DC Magnetic Field, Frequency and Temperature Dependence of the Surface Resistance of MgB2

The microwave power, dc magnetic field, frequency and temperature dependence of the surface resistance of MgB2 films and powder samples were studied. Sample quality is relatively easy to identify by a number of characteristics, the most clear being the breakdown in the omega squared law for poor quality samples. Analysis of the experimental data suggests the most attractive procedure for high quality film growth for technical applications.

cond-mat.supr-con

Growth of Strongly Biaxially Aligned MgB2 Thin Films on Sapphire by Post-annealing of Amorphous Precursors

MgB2 thin films were cold-grown on sapphire substrates by pulsed laser deposition (PLD), followed by post-annealing in mixed, reducing gas, Mg-rich, Zr gettered, environments. The films had Tcs in the range 29 K to 34 K, Jcs (20K, H=0) in the range 30 kA/cm2 to 300 kA/cm2, and irreversibility fields at 20 K of 4 T to 6.2 T. An inverse correlation was found between Tc and irreversibility field. The films had grain sizes of 0.1-1 micron and a strong biaxial alignment was observed in the 950C annealed film.

cond-mat.supr-con