arXiv subjects

Z. Meliani

Publications and source records attributed to Z. Meliani.

At least 19 recordsLinked to original sources

arXiv2026

The Rayleigh Taylor instability in partially ionized plasmas: ambipolar diffusion effects in the non linear phase

Aims. We aim to determine how ion neutral coupling and ambipolar diffusion affect the linear and the nonlinear growth of the RTinstability under astrophysically relevant conditions, and to identify the coupling regimes in which departures from the classical single fluid picture become significant. Methods. We perform high resolution two fluid numerical simulations using the MPI AMRVAC code, spanning a wide range of perturbation wavelengths, coupling strengths, from uncoupled to strongly coupled passing by intermediate or ambipolar diffusion dominated regimes, and magnetic field configurations. The linear theory is revisited using a physically consistent formulation with different ion neutral coupling strengths across the interface and validated against the simulations. We investigate the physics of the instability using morphology based diagnostics of the mixing layer to compare simulations at equivalent nonlinear stages, complemented by spectral, force, and energy budgets analyses. Results. In the linear regime, theoretical growth rates are recovered over a wide range of wavelengths, from the single fluid limit to intermediate bi fluid coupling. In the nonlinear regime, ambipolar diffusion modifies the classical quadratic growth and introduces a coupling dependent evolution. For multi wavelength perturbations, the nonlinear dynamics becomes strongly scale dependent: intermediate coupling enhances fragmentation in hydrodynamic configurations, while magnetised cases exhibit a non monotonic reorganisation of the interface, with the smoothest morphologies occurring at intermediate coupling. Spectral and energetic diagnostics indicate that these behaviours correlate with changes in the relative contributions of ion neutral drift and magnetic stresses during thenonlinear evolution

astro-ph.GA↗

arXiv2025

Outflow Interaction in Cep-E: Numerical Simulation and Observational Manifestation

There is clear observational evidence that the main Class 0/I stages of the star formation process are associated with powerful collimated outflows (jets), which sometimes propagate up to distances as large as $10^{4-5}$ au scales in molecular clouds. Additionally, intermediate high-mass and low-mass protostars have often been observed to form in crowded clusters, where the typical separation distance between any two cluster members is of the same order or smaller than the scale of the outflow length. Therefore, there must be an interaction between the molecular outflows of different protostars within the protostellar association. A good example of this is the case of Cepheus E-mm, which is a protostellar outflow extending over a few dozen au. At its core is a binary system consisting of two protostars, Cep E-A and Cep E-B, separated by about 1000 au. Both protostars eject molecular jets at velocities of ~100 km/s. The interaction between these molecular outflows provides an opportunity to study the effects of jet collisions in a clustered star-forming environment, as they may leave detectable imprints on the morphology of the main envelope of the system. Our work aims to study the effects of the collision of molecular jets associated with the components of the binary system Cep-A and Cep-E, analyzing the disruption or reduction of molecular emission in the main envelope of the system, which the molecular outflow { launched} by Cep-A presumably pushes. If we characterize the collision in this system, we can provide insights into the expected morphology and molecular emissions in collisions of molecular outflows { associated to star forming process.

astro-ph.SR↗

arXiv2025

Collisions in a system of conical jet/counterjet outflows

Stars predominantly form in compact, non-hierarchical clusters. The gas outflows ejected by protostars can intersect and interact with each other, resulting in complex interactions that affect the dynamics, morphology, and evolution of these outflows. Determining the probability of an encounter between them requires a Bayesian approach that considers the collimation, length (or age), and separation between young stellar objects in the clusters. In this study, we employ a Monte Carlo approach to estimate this probability as a function of the jet opening angle and the ratio between the jet length and the separation between stars. We propose a function that predicts the number of interactions within a cluster based on the opening angle of the gas outflows ejected by protostars.

astro-ph.SR↗

arXiv2025

A ring-shaped starburst as a galactic wind-generating mechanism: Morphology, emission, and mass ejection

Star formation bursts promote the ejection of material from the hosting galaxies due to the momentum and energy injected by winds from massive stars and supernova explosions. Numerical or analytical models generally consider that the mass, momentum, and energy injections result from bursts in a nuclear star formation region. However, star formation bursts have recently been observed in ring-like regions in the nuclear part of the galaxies. One example is NGC 253, which has shown a central toroidal burst and an asymmetric galactic wind observed in thermal X-ray emission. The general aim of this work is to study the effect of mechanical energy injection from stellar winds and supernova explosions in star-forming bursts distributed in rings around the nucleus of the galaxy NGC 253. Additionally, these partial objectives allow us to analyze the asymmetry of the outflows due to the bursts position as well as to study the formation of filaments with optical emission and make comparisons with recent observations of galaxies with these types of star-forming bursts. We used the hydrodynamic code AMRVAC to simulate galactic wind ejection coming from a central ring-like starburst located at different vertical positions. We showed that including a ring-shaped starburst (RSS) generates a more complex structured wind than what would be expected for a spherical starburst injection. Besides the interaction between the wind generated by the RSS and the host galaxy, it can generate dense filamentary structures with H alpha emission. The mass flux analysis of our models shows that the variation in the vertical position of the starburst can generate a variation in the mass flux of each lobe of the wind up to an order of magnitude. However, this difference is sustained only for a short period, with the flux tending to be symmetrical once it enters into a free-wind solution.

astro-ph.GA↗

arXiv2025

Impact of the ambipolar diffusion in the structuration of the magnetic Rayleigh Taylor instability with oblique magnetic field

Aims. We investigate the impact of ambipolar diffusion on the development of the Rayleigh-Taylor instability (RTI) with an oblique magnetic field in the incompressible limit. Methods. We developed a general bi-fluid framework comprising charges and neutrals with the specific feature of differing gravity between charges and neutrals. We derived the perturbed magnetohydrodynamic (MHD) equations and obtained an analytic dispersion relation for an oblique magnetic field. The growth rate was then evaluated using a numerical integration of the dispersion relation. In particular, we focussed on the anisotropy in the mode growth induced ambipolar diffusion. Results. In contrast to the case of a magnetic field within the interface, an oblique magnetic field is much less restrictive with respect to the wavenumbers that can develop; rather than a sharp cut-off, it results in a selection of preferred scales for mode growth. The presence of a second neutral fluid that is insensitive to gravity tends to amplify the anisotropy in the possible direction of the instability development. In particular, we show that this effect is maximal when the coupling is in an intermediate range between full and no charge-neutral coupling, specifically in the region where the ambipolar diffusion is highest.

astro-ph.GA↗

arXiv2025

3D MHD simulations of runaway pulsars in core collapse supernova remnants

Pulsars are one of the possible final stages in the evolution of massive stars. If a supernova explosion is anisotropic, it can give the pulsar a powerful kick, propelling it to supersonic speeds. The resulting pulsar wind nebula is significantly reshaped by its interaction with the surrounding medium as the pulsar moves through it. First, the pulsar crosses the supernova remnant, followed by the different layers of circumstellar medium formed during different stages of the progenitor star s evolution. We aim to investigate how the evolutionary history of massive stars shapes the bow shock nebulae of runaway kicked pulsars, and how these influences in turn affect the dynamics and non-thermal radio emission of the entire pulsar remnant. We perform three-dimensional magnetohydrodynamic simulations using the PLUTO code to model the pulsar wind nebula generated by a runaway pulsar in the supernova remnant of a red supergiant progenitor, and derive its non-thermal radio emission. The supernova remnant and the pre-supernova circumstellar medium of the progenitor strongly confine and reshape the pulsar wind nebula of the runaway pulsar, bending its two side jets inwards and giving the nebula an arched shape for an observer perpendicular to the jets and the propagation direction, as observed around PSR J1509 5850 and Gemina. We perform the first classical 3D model of a pulsar moving inward through its supernova ejecta and circumstellar medium, inducing a bending of its polar jet that turns into characteristic radio synchrotron signature. The circumstellar medium of young runaway pulsars has a significant influence on the morphology and emission of pulsar wind nebulae, whose comprehension requires a detailed understanding of the evolutionary history of the progenitor star.

astro-ph.HE↗

arXiv2024

Hydrodynamical simulations of wind interaction in spider systems : A step toward understanding transitional millisecond pulsars

The detected population of "spiders" has significantly grown in the past decade thanks to multiwavelength follow-up investigations of unidentified Fermi sources. These systems consist of low-mass stellar companions orbiting rotation-powered millisecond pulsars in short periods of a few hours up to day. Among them, a subset of intriguing objects called transitional millisecond pulsars (tMSPs) has been shown to exhibit a remarkable behavior, transitioning between pulsar-binary and faint low-mass X-ray binary states over a span of a few years. Our objective is to study the interaction of stellar winds in tMSPs in order to understand their observational properties. To this end we focus on the parameter range that places the system near Roche-lobe overflow. Employing the adaptative mesh refinement (AMR) AMRVAC 2.0 code, we performed 2D hydrodynamical (HD) simulations of the interaction between the flows from both stars, accounting for the effects of gravity and orbital motion. By studying the mass loss and launch speed of the winds, we successfully recreated two phenomenologically distinct regimes: the accretion stream and the radio pulsar state. We also identified the tipping point that marks the sharp transition between these two states. In the pulsar state, we reconstructed the corresponding X-ray light curves of the system that produces the characteristic double-peak pattern of these systems. The position of the peaks is shifted due to orbital motion and the leading peak is weaker due to eclipsing by the companion. We suggest that a smaller leading peak in X-rays is indicative of a nearly edge-on system. This study highlights the importance of gravity and orbital motion in the interaction between the companion and pulsar winds. Our setup allows the study of the complex interaction between the pulsar wind and an accretion stream during mass transfer.

astro-ph.HE↗

arXiv2024

The galactic bubbles of starburst galaxies The influence of galactic large-scale magnetic fields

Context. The galactic winds of starburst galaxies (SBGs) give rise to remarkable structures on kiloparsec scales. However, the evolution and shape of these giant wind bubbles, as well as the properties of the shocks they develop, are not yet fully understood. Aims. We aim to understand what shapes the galactic winds of SBGs, with a particular focus on the role of large-scale magnetic fields in the dynamical evolution of galactic wind-inflated bubbles. In addition, we aim to explore where the conditions for efficient particle acceleration are met in these systems. Methods. We performed magnetohydrodynamic simulations with the AMRVAC code (Adaptive Mesh Refinement Versatile Advection Code) with various configurations of the galactic medium density profile and magnetization. Results. We observe that the large-scale magnetic field, in which galactic winds expand, can impact the structure and evolution of inflated bubbles. However, the typical structures observed in starburst galaxies, such as M82, cannot be solely explained by the magnetic field structures that have been considered. This highlights the importance of other factors, such as the galactic disk, in shaping the galactic bubble. Furthermore, in all the magnetized cases we investigated, the forward wave resulting from the expanding bubbles only results in compression waves, whereas the wind termination shock features high Mach numbers, making it a promising site for diffusive shock acceleration up to $\sim 10^{2}$ PeV. The synthetic X-ray images generated from our models reveal an envelope surrounding the bubbles that extends up to 2 kpc, which could correspond to the polarized emission observed from planar geometry in M82, as well as a large structure inside the bubble corresponding to the shocked galactic wind.

astro-ph.GA↗

arXiv2022

Pulsar wind nebulae of runaway massive stars

A significant fraction of massive stars move at speed through the interstellar medium of galaxies. After their death as core collapse supernovae, a possible final evolutionary state is that of a fast rotating magnetised neutron star, shaping its circumstellar medium into a pulsar wind nebula. Understanding the properties of pulsar wind nebulae requires knowledge of the evolutionary history of their massive progenitors. Using 2.5D magnetohydrodynamical simulations, we demonstrate that, in the context of a runaway high mass red supergiant supernova progenitor, the morphology of its subsequent pulsar wind nebula is strongly affected by the wind of the defunct progenitor star preshaping the stellar surroundings throughout its entire past life. In particular, pulsar wind nebulae of obscured runaway massive stars harbour asymmetries function of the morphology of the progenitors wind blown cavity, inducing projected asymmetric up down synchrotron emission.

astro-ph.HE↗

arXiv2022

Wide-angle protostellar outflows driven by narrow jets in stratified cores

Most simulations of outflow feedback on star formation are based on the assumption that outflows are driven by a wide angle "X-wind," rather than a narrow jet. However, the arguments initially raised against pure jet-driven flows were based on steady ejection in a uniform medium, a notion that is no longer supported based on recent observations. We aim to determine whether a pulsed narrow jet launched in a density-stratified, self-gravitating core could reproduce typical molecular outflow properties, without the help of a wide-angle wind component. We performed axisymmetric hydrodynamic simulations using the MPI-AMRVAC code with optically thin radiative cooling on timescales up to 10000 yrs. Then we computed and compared the predicted properties with observational data. First, the jet-driven shell expands faster and wider through a core with steeply decreasing density than through an uniform core. Second, when blown into the same singular flattened core, a jet-driven shell has a similar width as a wide-angle wind-driven shell in the first few hundred years, but a decelerating expansion on long timescales. The flow adopts a conical shape and a base opening angle reaching up to $90\unicode{xb0}$. Third, after $\sim$ 10000 yrs, a pulsed jet-driven shell shows fitting features and a qualitative resemblance with recent observations of protostellar outflows with the Atacama Large Millimeter Array (ALMA), such as HH46-47 and CARMA-7. In particular, similarities are seen in the shell widths, opening angles, position-velocity diagrams, and mass-velocity distribution, with some showing a closer resemblance than in simulations based on a wide-angle "X-wind" model. Therefore, a realistic ambient density stratification in addition to millenia-long integration times are equally essential to reliably predict the properties of outflows driven by a pulsed jet and to confront them with the observations.

astro-ph.SR↗

arXiv2021

Two-wind interactions in binaries with two orbiting giant stars

Some red giant envelopes present spiral structures (seen either in dust scattered stellar continuum or in molecular line emission), the most striking example probably being AFGL 3068. This object has been modeled (both analytically and numerically) in terms of a wind ejected from a star in orbit around a binary companion. We revisit both analytical models and 3D simulations of a wind from an orbiting red giant star, and extend the numerical simulations to the case of a binary with two red giants with strong winds. We find that most two-wind models on the orbital plane show a "double spiral" structure close to the binary source, and that these two arms merge into a single spiral structure at larger distances. However, for the case of a binary with two identical winds the two spiral arms are still present at large distances from the binary source. We also find that for models of two (not identical) dynamically important winds, a region close to the orbital plane has material from both winds. Also, an approximately conical region centered on the orbital axis is filled exclusively by the wind with larger momentum rate. These two structures lead to morphologies reminiscent of the so-called "hour glass" planetary nebulae. Finally, we find that increasing wind velocity disparities lead to the formation of clumpy structures along the spiral amrs. Observations of "clumpy spirals" are therefore likely to indicate the presence of two strong winds from the stars in the central binary system.

astro-ph.GA↗

arXiv2020

Multi-scale simulations of particle acceleration in astrophysical systems

This review aims at providing an up-to-date status and a general introduction to the subject of the numerical study of energetic particle acceleration and transport in turbulent astrophysical flows. The subject is also complemented by a short overview of recent progresses obtained in the domain of laser plasma experiments. We review the main physical processes at the heart of the production of a non-thermal distribution in both Newtonian and relativistic astrophysical flows, namely the first and second order Fermi acceleration processes. We also discuss shock drift and surfing acceleration, two processes important in the context of particle injection in shock acceleration. We analyze with some details the particle-in-cell (PIC) approach used to describe particle kinetics. We review the main results obtained with PIC simulations in the recent years concerning particle acceleration at shocks and in reconnection events. The review discusses the solution of Fokker-Planck problems with application to the study of particle acceleration at shocks but also in hot coronal plasmas surrounding compact objects. We continue by considering large scale physics. We describe recent developments in magnetohydrodynamic (MHD) simulations. We give a special emphasize on the way energetic particle dynamics can be coupled to MHD solutions either using a multi-fluid calculation or directly coupling kinetic and fluid calculations. This aspect is mandatory to investigate the acceleration of particles in the deep relativistic regimes to explain the highest Cosmic Ray energies.

astro-ph.HE↗

arXiv2019

Numerical models for the dust in RCW 120

The interstellar bubble RCW 120 seen around a type O runaway star is driven by the stellar wind and the ionising radiation emitted by the star. The boundary between the stellar wind and interstellar medium (ISM) is associated with the arc-shaped mid-infrared dust emission around the star within the HII region.

astro-ph.GA↗

arXiv2017

Comparing timelike geodesics around a Kerr black hole and a boson star

The second-generation beam combiner at the Very Large Telescope (VLT), GRAVITY, observes the stars orbiting the compact object located at the center of our galaxy, with an unprecedented astrometric accuracy of 10 $μ$as. The nature of this compact source is still unknown since black holes are not the only candidates explaining the four million solar masses at the Galactic center. Boson stars are such an alternative model to black holes. This paper focuses on the study of trajectories of stars orbiting a boson star and a Kerr black hole. We put in light strong differences between orbits obtained in both metrics when considering stars with sufficiently close pericenters to the compact object, typically $\lesssim 30~M$. Discovery of closer stars to the Galactic center than the S2 star by the GRAVITY instrument would thus be a powerful tool to possibly constrain the nature of the central source.

astro-ph.HE↗

arXiv2017

Shocks in relativistic transverse stratified jets, a new paradigm for radio-loud AGN

The transverse stratification of active galactic nuclei (AGN) jets is suggested by observations and theoretical arguments, as a consequence of intrinsic properties of the central engine (accretion disc + black hole) and external medium. On the other hand, the one-component jet approaches are heavily challenged by the various observed properties of plasmoids in radio jets (knots), often associated with internal shocks. Given that such a transverse stratification plays an important role on the jets acceleration, stability, and interaction with the external medium, it should also induce internal shocks with various strengths and configurations, able to describe the observed knots behaviours. By establishing a relation between the transverse stratification of the jets, the internal shock properties, and the multiple observed AGN jet morphologies and behaviours, our aim is to provide a consistent global scheme of the various AGN jet structures. Working on a large sample of AGN radio jets monitored in very long baseline interferometry (VLBI) by the MOJAVE collaboration, we determined the consistency of a systematic association of the multiple knots with successive re-collimation shocks. We then investigated the re-collimation shock formation and the influence of different transverse stratified structures by parametrically exploring the two relativistic outflow components with the specific relativistic hydrodynamic (SRHD) code AMRVAC. We were able to link the different spectral classes of AGN with specific stratified jet characteristics, in good accordance with their VLBI radio properties and their accretion regimes.

astro-ph.HE↗

arXiv2016

Impact of Schwarzschild black hole's gravity upon the Rossby wave instability

In an early work the Rossby Wave Instability (RWI) has been proposed to explain variability thought to originate in the close vicinity of black-holes but this was done in the pseudo-Newtonian approach. Here we present the first general relativistic hydrodynamics simulations of this instability not only proving its theorized existence in a full general relativistic (GR) environment but also studying the effect of the strong gravity on the instability. To that end we performed a set of simulations increasingly closer to the black hole with our new GR version of the MPI-AMRVAC code.This allows us to study the minute changes in the behaviour of the instability.We found that the pseudo-Newtonian approach gives adequate results provided that time shifting induced by the black hole gravity is taken into account. Hence, to view the disc as a distant observer would a full GR ray-tracing post treatment of the simulations is a must.

astro-ph.HE↗

arXiv2016

Imaging a boson star at the Galactic center

Millimeter very long baseline interferometry will soon produce accurate images of the closest surroundings of the supermassive compact object at the center of the Galaxy, Sgr A*. These images may reveal the existence of a central faint region, the so-called shadow, which is often interpreted as the observable consequence of the event horizon of a black hole. In this paper, we compute images of an accretion torus around Sgr A* assuming this compact object is a boson star, i.e. an alternative to black holes within general relativity, with no event horizon and no hard surface. We show that very relativistic rotating boson stars produce images extremely similar to Kerr black holes, showing in particular shadow-like and photon-ring-like structures. This result highlights the extreme difficulty of unambiguously telling the existence of an event horizon from strong-field images.

gr-qc↗

arXiv2015

Circular geodesics and thick tori around rotating boson stars

Accretion disks play an important role in the evolution of their relativistic inner compact objects. The emergence of a new generation of interferometers will allow to resolve these accretion disks and provide more information about the properties of the central gravitating object. Due to this instrumental leap forward it is crucial to investigate the accretion disk physics near various types of inner compact objects now to deduce later constraints on the central objects from observations. A possible candidate for the inner object is the boson star. Here, we will try to analyze the differences between accretion structures surrounding boson stars and black holes. We aim at analysing the physics of circular geodesics around boson stars and study simple thick accretion tori (so-called Polish doughnuts) in the vicinity of these stars. We realize a detailed study of the properties of circular geodesics around boson stars. We then perform a parameter study of thick tori with constant angular momentum surrounding boson stars. This is done using the boson star models computed by a code constructed with the spectral solver library KADATH. We demonstrate that all the circular stable orbits are bound. In the case of a constant angular momentum torus, a cusp in the torus surface exists only for boson stars with a strong gravitational scalar field. Moreover, for each inner radius of the disk, the allowed specific angular momentum values lie within a constrained range which depends on the boson star considered. We show that the accretion tori around boson stars have different characteristics than in the vicinity of a black hole. With future instruments it could be possible to use these differences to constrain the nature of compact objects.

astro-ph.HE↗