arXiv subjects

Zach Yarbrough

Publications and source records attributed to Zach Yarbrough.

16 recordsLinked to original sources

arXiv2026

SGNAX: a unified matched-filter and excess-power pipeline for gravitational-wave detector characterization

We present SGNAX, an open-source pipeline for gravitational-wave detector characterization that delivers matched-filter and excess-power transient triggers from a single streaming dataflow graph. Built on the Stream Graph Navigator (sgn) framework, SGNAX unifies the multi-rate sine-Gaussian matched-filter search of snax and the multi-resolution Q-transform search of omicron in one Python-native package. Auxiliary channels from an interferometer are analyzed as parallel branches sharing data-read and whitening stages, reducing per-channel processing cost as channels are added. A full day of 16 kHz strain is analyzed in 14 minutes, and Q-transform processing is 2.8 times more efficient per channel at 32 channels than at one. Matched-filter correlations use PyTorch and run on CPU or GPU. Data sources include offline frame caches, shared-memory buffers, and the arrakis distribution service, with the same configuration supporting offline and online operation. The matched filter delivers triggers at about five seconds end-to-end latency, while the Q-transform operates at latencies of tens of seconds. Injection campaigns recover 99.4% of recoverable sine-Gaussian injections with parameters within the expected template mismatch and show broadband white-noise-burst recovery consistent with established event-trigger generators. On 24 hours of archival LIGO strain, SGNAX reproduces the omicron trigger population at 10--100 Hz, with trigger rates and SNRs agreeing to a few percent. On production auxiliary channels, it recovers the snax loud-feature population with 80% per-bin coincidence. The injection-calibrated reimplementation also reveals a multiband amplitude error in production snax that inflates reported SNRs below 25.6 Hz by factors of $\sqrt{2}$--2, for which we identify the mechanism and correction.

astro-ph.IM↗

arXiv2026

SGN: A python framework for stream-processing pipelines

We present the Stream Graph Navigator (SGN), a lightweight Python framework for building streaming data applications. In SGN, stream-processing pipelines are built by connecting computational components into directed acyclic graphs that run within an event loop. The time-series extension of the SGN library, SGN-TS, introduces signal processing methods to handle time series data. Together, SGN and SGN-TS provide the foundation for SGNL, a matched-filtering gravitational-wave search pipeline, and are being adopted by multiple projects across the low-latency gravitational-wave data analysis infrastructure as an extensible and maintainable framework for future gravitational-wave observations.

astro-ph.IM↗

arXiv2026

Method to get Better Sky Maps in a GstLAL Low-Latency Analysis

Modeled gravitational wave searches correlate the strain data with a bank of gravitational wave template waveforms to make detections of gravitational wave candidates, and these results are processed by downstream tools to calculate the likely sky location and distance of the source of the candidates. This is crucial for multi-messenger efforts, since it informs astronomers where to point their telescopes to facilitate electromagnetic follow-up of the gravitational wave candidates. We present a novel method to improve the low-latency results of the GstLAL gravitational wave search pipeline, and thus improving sky location estimates of low-latency candidates. This method involves ingesting the GstLAL low-latency results, and performing a small targeted hierarchical search to recover the candidates with more accurate parameters, in a medium-latency timescale (few seconds to five minutes). To test our method, we perform a GstLAL low-latency analysis on forty days of data from the third observing run of LIGO, Virgo, and KAGRA, and show that our method improves the GstLAL results by 5.38% and the subsequent sky location results by 16.75% on average. In addition to this increase in precision, we also show that these results are more accurate as compared to the GstLAL results. This method has been adopted by GstLAL for the fourth observing run.

astro-ph.IM↗

arXiv2026

Fisher Information Velocity: A New Geometric Channel for Precision Glitch Identification in Gravitational-Wave Detectors

Gravitational-wave detectors operate in inherently non-stationary environments, requiring robust detector characterization (DetChar) to distinguish instrumental transients from astrophysical signals. Traditional DetChar frameworks typically rely on morphological classifiers or energy-based projections, such as band-limited root-mean-square (BLRMS) metrics, which can conflate global amplitude scaling with physical reconfigurations of the spectrum. In this work, we introduce Fisher information velocity, a novel geometric channel that models the detector's power spectral density (PSD) as a point on a Riemannian manifold. By tracking the kinematic drift of the noise floor and utilizing exterior algebra to calculate tangent divergence ($\sin \theta$), we mathematically decouple simple energy surges from spectral warps, or differential redistributions of power across frequency bands. Applying this framework via the sgn-drift streaming pipeline to ~40 hours of high-cadence Advanced LIGO O4a data, we evaluate N=282,080 independent manifold velocity samples. High-resolution phase space mapping reveals a bimodal taxonomy of severe instrumental non-stationarity, classifying events into structural pivots (87.2%) and isotropic surges (12.8%). Among co-detected events, the geometric channel achieves higher significance than standard BLRMS monitors in 74% of cases with a median sensitivity ratio of $\Gamma = 1.65$. The two channels detect largely non-overlapping populations, increasing the total anomaly catalog by 87% over BLRMS alone. Systematic validation on 10 confirmed GWTC-4.0 events and ~5,000 simulated injections demonstrates robust insensitivity to astrophysical signals, establishing this geometric channel as a sensitive, complementary, and veto-safe diagnostic for current and next-generation detector networks.

astro-ph.IM↗

arXiv2026

GstLAL O4 Online Results Paper

Gravitational-wave observations of merging binary neutron stars and black holes are now routinely made by detectors in the Advanced LIGO-Virgo-KAGRA network. Neutron star binary systems may also produce detectable electromagnetic and particle emission over times scales ranging from seconds to years. Real-time gravitational-wave searches play a central role in enabling time-critical electromagnetic and/or neutrino follow-up observations. During the fourth observing run (O4) of the Advanced LIGO-Virgo-KAGRA network, multiple real-time searches operated continuously to identify candidate gravitational-wave events and publicly disseminate information about these discoveries. Here, the performance and results of the GstLAL real-time analysis are reported. The analysis is designed to identify candidates with low latency, high detection efficiency, and sustained operational uptime over long observing periods. Across O4, it produced initial candidate uploads with a median latency of 15.8 s while maintaining an effective uptime of 98% during the first two parts of the observing run. During the run, the analysis contributed to 250 candidates classified as astrophysically plausible, provided the first upload for 222 of these, and was the sole contributor for 75. Among Gravitational-Wave Transient Catalog events with a false-alarm rate below one per year, 88% were identified as significant in low latency and promoted for expert vetting and public dissemination. The low-latency astrophysical classifications agreed with the final catalog classifications for 93% of the events considered.

gr-qc↗

arXiv2026

Rapid data quality investigations of gravitational-wave events with the Data Quality Report Builder toolkit

We present the Data Quality Report Builder toolkit, DQRbuild, a suite of data quality tools that have been developed to vet gravitational-wave events in preparation for the fourth LIGO-Virgo-KAGRA observing run. We explain the main functionality and the many scientific tests that we support. To validate the performance of the tools included in the toolkit, we run a series of tests on all significant candidates shared as public alerts in the third observing run to compare against what was manually reported using human intervention. We find that these automated tools can now identify 96% of the problems identified by humans during this previous observing run, with a 24% false alarm rate. We conclude with a commentary on the prospects and potential challenges for fully automating the process of vetting the data quality for gravitational-wave events identified in future observing runs.

astro-ph.IM↗

arXiv2026

Gauge Theoretic Signal Processing II: Zero-Latency Whitening for Early Warning Pipelines

Low-latency gravitational-wave search pipelines provide early-warning alerts for multimessenger astrophysical transients. Current pipelines whiten the data stream using acausal, linear-phase filters, which require a look-ahead buffer that introduces several seconds of algorithmic latency. Eliminating this latency requires causal, minimum-phase whitening filters using only past data. However, operating causal filters under non-stationary noise is non-trivial: the drifting power spectral density must be tracked without degrading the matched-filter signal-to-noise ratio (SNR), filter updates must preserve the minimum-phase condition, and the altered phase response must be compensated to maintain sky-localization accuracy. In Paper I we introduced a gauge theoretic signal processing framework and showed that the minimum-phase connection on the manifold of power spectra provides a geometrically exact update rule for causal filters. Here we validate that framework numerically and operationally, demonstrating that parallel transport along this connection strictly preserves the minimum-phase property while exactly conserving the matched-filter SNR. We numerically certify the flatness of this connection, showing that the optimal filter is a path-independent state function of the instantaneous noise. Through an injection campaign on O3 data with 15,347 binary black hole signals across the LIGO-Virgo network, we confirm that this architecture preserves the detection sensitivity and inter-detector timing and phase accuracy of the linear-phase baseline. Implementing the framework in the production sgnl pipeline reduces whitening latency by 1.0 s (33%) at a 4-second noise estimation cadence, confirmed in controlled tests and on live O3 replay data at production scale. Stride reduction experiments show that up to 91% of baseline trigger latency can be eliminated with sub-second pipeline cadence.

gr-qc↗

arXiv2025

SGNL: Scalable Low-Latency Gravitational Wave Detection Pipeline for Compact Binary Mergers

We present SGNL, a scalable, low-latency gravitational-wave search pipeline. It reimplements the core matched-filtering principles of the GstLAL pipeline within a modernized framework. The Stream Graph Navigator library, a lightweight Python streaming framework, replaces GstLAL's GStreamer infrastructure, simplifying pipeline construction and enabling flexible, modular graph design. The filtering core is reimplemented in PyTorch, allowing SGNL to leverage GPU acceleration for improved computational scalability. We describe the pipeline architecture and introduce a novel implementation of the Low-Latency Online Inspiral Detection algorithm in which components are pre-synchronized to reduce latency. Results from 40 days of data show that SGNL's event recovery and sensitivity are consistent with GstLAL's within statistical and systematic uncertainties. Notably, SGNL achieves a median latency of 4.7 seconds, compared to 9.0 seconds for GstLAL.

astro-ph.IM↗

arXiv2025

GW231109_235456: A Sub-threshold Binary Neutron Star Merger in the LIGO-Virgo-KAGRA O4a Observing Run?

We present a subthreshold search for gravitational-wave inspirals from binary neutron stars using data from the first part of the fourth observing run of the LIGO-Virgo-KAGRA Collaboration. To enhance sensitivity to this targeted population, we incorporate a redshift-corrected population model informed by radio observations of Galactic double neutron star systems. The search identifies a significant trigger with a false-alarm rate of one per fifty years and a network signal-to-noise ratio of 9.7. This trigger was first reported in low-latency processing as S231109ci and subsequently listed in the GWTC-4.0 catalog as GW231109_235456, a subthreshold candidate. Accounting for a trials factor of five arising from four previous searches in GWTC-4.0 and this new search, the false-alarm rate of the candidate is approximately one per ten years. If the event is of astrophysical origin, the inferred source properties indicate component masses of 1.40 to 2.24 solar masses for the primary and 0.97 to 1.49 solar masses for the secondary, yielding a total mass of 2.95 solar masses with an uncertainty of plus 0.38 and minus 0.07 solar masses. The event is localized to a region of 450 square degrees enclosing ninety percent probability at a luminosity distance of 165 megaparsecs with an uncertainty of plus 70 and minus 69 megaparsecs. Assuming the signal arises from a binary neutron star merger, we estimate the local merger rate to lie between 53 and 342 per cubic gigaparsec per year.

astro-ph.HE↗

arXiv2025

New Methods for Offline GstLAL Analyses

In this work, we present new methods implemented in the GstLAL offline gravitational wave search. These include a technique to reuse the matched filtering data products from a GstLAL online analysis, which hugely reduces the time and computational resources required to obtain offline results; a technique to combine these results with a separate search for heavier black hole mergers, enabling detections from a larger set of gravitational wave sources; changes to the likelihood ratio which increases the sensitivity of the analysis; and two separate changes to the background estimation, allowing more precise significance estimation of gravitational wave candidates. Some of these methods increase the sensitivity of the analysis, whereas others correct previous mis-estimations of sensitivity by eliminating false positives. These methods have been adopted for GstLAL's offline results during the fourth observing run of LIGO, Virgo, and KAGRA (O4). To test these new methods, we perform an offline analysis over one chunk of O3 data, lasting from May 12 19:36:42 UTC 2019 to May 21 14:45:08 UTC 2019, and compare it with previous GstLAL results over the same period of time. We show that cumulatively these methods afford around a 50% - 100% increase in sensitivity in the highest mass space, while simultaneously increasing the reliability of results, and making them more reusable and computationally cheaper.

gr-qc↗

arXiv2025

How Many Times Should We Matched Filter Gravitational Wave Data? A Comparison of GstLAL's Online and Offline Performance

Searches for gravitational waves from compact binary coalescences employ a process called matched filtering, in which gravitational wave strain data is cross-correlated against a bank of waveform templates. Data from every observing run of the LIGO, Virgo, and KAGRA collaboration is typically analyzed in this way twice, first in a low-latency mode in which gravitational wave candidates are identified in near-real time, and later in a high-latency mode. Such high-latency analyses have traditionally been considered more sensitive, since background data from the full observing run is available for assigning significance to all candidates, as well as more robust, since they do not need to worry about keeping up with live data. In this work, we present a novel technique to use the matched filtering data products from a low-latency analysis and re-process them by assigning significances in a high-latency way, effectively removing the need to perform matched filtering a second time. To demonstrate the efficacy of our method, we analyze 38 days of LIGO and Virgo data from the third observing run (O3) using the GstLAL pipeline, and show that our method is as sensitive and reliable as a traditional high-latency analysis. Since matched filtering represents the vast majority of computing time for a traditional analysis, our method greatly reduces the time and computational burden required to produce the same results as a traditional high-latency analysis. Consequently, it has already been adopted by GstLAL for the fourth observing run (O4) of the LIGO, Virgo, and KAGRA collaboration.

gr-qc↗

arXiv2025

PINCH: Pipeline-Informed Noise Characterization in LIGO's Third Observing Run

We present a method to identify and categorize gravitational wave candidate triggers identified by matched filtering gravitational wave searches (pipelines) caused by transient noise (glitches) in gravitational wave detectors using Support Vector Machine (SVM) classifiers. Our approach involves training SVM models on pipeline triggers which occur outside periods of excess noise to distinguish between triggers caused by random noise and those induced by glitches. This method is applied independently to the triggers produced by the GstLAL search pipeline on data from the LIGO Hanford and Livingston observatories during the second half of the O3 observing run. The trained SVM models assign scores to ambiguous triggers, quantifying their similarity to triggers caused by random fluctuations, with triggers with scores above a defined threshold being classified as glitch-induced. Analysis of these triggers reveals the distinct impact of different glitch classes on the search pipeline, including their distribution in relevant parameter spaces. We use metrics such as the Bhattacharyya coefficient and an over-representation ratio to quantify the consistency and prevalence of glitch impacts over time and across parameter spaces. Our findings indicate that some glitch types consistently produce triggers in specific regions of the parameter space, while others generate triggers that are more widely distributed. We observe that Scattered Light glitches appear differently in the search pipeline before and after a commissioning change, demonstrating how such detector changes appear in the pipeline's response to certain glitch classes. This method provides a framework for understanding and mitigating the influence of non-Gaussian transients on gravitational wave search pipelines, with implications for improving detection sensitivity and better understanding noise populations.

gr-qc↗

arXiv2024

Template bank for sub solar mass compact binary mergers in the fourth observing run of Advanced LIGO, Advanced Virgo, and KAGRA

Matched-filtering searches for gravitational-wave signals from compact binary mergers employ template banks which are a collection of modeled waveforms described by unique intrinsic parameters. We present two banks designed for low-latency and archive sub-solar mass (SSM) searches in data from the fourth observing run of LIGO-Virgo-KAGRA, and demonstrate the efficacy of the banks via simulated signals. Further, we introduce a set of modifications to the geometric, manifold algorithm that allow the method to work for exceedingly low component masses necessary for SSM bank production. The archive search bank contains a total of $3,452,006$ templates, and covers a mass parameter space of $0.2$ to $10\ M_\odot$ in the larger component and $0.2$ to $1.0\ M_\odot$ in the smaller component, the spin parameter space of $-0.9$ to $0.9$ for masses above $0.5$ $M_\odot$ and $-0.1$ to $0.1$ for masses below $0.5$ $M_\odot$, and the mass ratio parameter space of $1$ to $10$. The PSD used was from a week of the first half of the fourth observing run of Advanced LIGO, Advanced Virgo, and KAGRA, and the low frequency cutoff was set to $45$ Hz with a maximum waveform duration of $128$ seconds. The bank simulations performed using SBank have shown that the banks presented in this paper have sufficient efficacy for use in their respective searches.

gr-qc↗

arXiv2024

Performance of iDQ ahead of LIGO, Virgo, and KAGRA's fourth observing run

The gravitational wave detectors used by the LIGO Scientific Collaboration, and the Virgo Collaboration are incredibly sensitive instruments which frequently detect non-stationary, non-Gaussian noise transients. iDQ is a statistical inference framework which leverages the use of auxiliary degrees of freedom monitored in the detectors to identify such transients. In this work, we describe the improvements to the iDQ pipeline made between the third and fourth observing run of the LIGO-Virgo-KAGRA (LVK) collaboration, and show the performance of these changes. We find that iDQ detects a total of 39,398 of the known 100,512 glitches identified by Omicron over the course of the second half of the third observing run. We construct a measure of the probability a glitch is present in the strain data of a given detector by combining information from iDQ and Omicron as well as extend the output of iDQ in a novel method which finds correlations between known glitch classifications, and auxiliary channels. We identify several channels over the course of O3b which frequently record instances of Scattered Light, Whistle, and Blip glitches and discuss use cases for this method in active observing runs.

gr-qc↗

arXiv2024

Scalable matched-filtering pipeline for gravitational-wave searches of compact binary mergers

As gravitational-wave observations expand in scope and detection rate, the data analysis infrastructure must be modernized to accommodate rising computational demands and ensure sustainability. We present a scalable gravitational-wave search pipeline which modernizes the GstLAL pipeline by adapting the core filtering engine to the PyTorch framework, enabling flexible execution on both Central Processing Units (CPUs) and Graphics Processing Units (GPUs). Offline search results on the same 8.8 day stretch of public gravitational-wave data indicate that the GstLAL and the PyTorch adaptation demonstrate comparable search performance, even with float16 precision. Lastly, computational benchmarking results show that the GPU float16 configuration of the PyTorch adaptation executed on an A100 GPU can achieve a speedup factor of up to 169 times compared to GstLAL's performance on a single CPU core.

gr-qc↗

arXiv2023

Direct Analysis of the Broad-Line SN 2019ein: Connection with the Core-Normal SN 2011fe

Type Ia supernovae (SNe Ia) are important cosmological probes and contributors to galactic nucleosynthesis, particularly of the iron group elements. To improve both their reliability as cosmological probes and to understand galactic chemical evolution, it is vital to understand the binary progenitor system and explosion mechanism. The classification of SNe Ia into Branch groups has led to some understanding of the similarities and differences among the varieties of observed SNe Ia. However, partly due to small sample size, little work has been done on the broad-line or 02bo group. We perform direct spectral analysis on the pre-maximum spectra of the broad-line SN 2019ein and compare and contrast it to the core-normal SN~2011fe. Both SN 2019ein and SN 2011fe were first observed spectroscopically within two days of discovery, allowing us to follow the spectroscopic evolution of both supernovae in detail. We find that the optical depths of the primary features of both the CN and BL supernovae are very similar, except that there is a velocity shift between them. We further examine the SN 2002bo-like subclass and show that for nine objects with pre-maximum spectra in the range -6 -- -2 days with respect to B-maximum all the emission peaks of the Si II λ6355 line of BL are blueshifted pre-maximum, making this a simple classification criterion.

astro-ph.HE↗