arXiv subjects

Zeineb Ben Aziza

Publications and source records attributed to Zeineb Ben Aziza.

8 recordsLinked to original sources

arXiv2019

Nanomechanical strain concentration on a 2D nanobridge within a large suspended bilayer graphene for molecular mass detection

The recent emergence of strain gradient engineering directly affects the nanomechanics, optoelectronics and thermal transport fields in 2D materials. More specifically, large suspended graphene under very high stress represents the quintessence for nanomechanical mass detection through unique molecular reactions. Different techniques have been used to induce strain in 2D materials, for instance by applying tip indentation, pressure or substrate bending on a graphene membrane. Nevertheless, an efficient way to control the strain of a structure is to engineer the system geometry as shown in everyday life in architecture and acoustics. Similarly, we studied the concentration of strain in artificial nanoconstrictions (~100 nm) in a suspended epitaxial bilayer graphene membrane with different geometries and lengths ranging from 10 to 40 micrometer. We carefully isolated the strain signature from micro-Raman measurements and extracted information on a scale below the laser spot size by analyzing the broadened shape of our Raman peaks, up to 100 cm-1. We potentially measured a strong strain concentration in a nanoconstriction up to 5percent, which is 20 times larger than the native epitaxial graphene strain. Moreover, with a bilayer graphene, our configuration naturally enhanced the native asymmetric strain between the upper and lower graphene layers. In contrast to previous results, we can achieve any kind of complex strain tensor in graphene thanks to our structural approach. This method completes the previous strain-induced techniques and opens up new perspectives for bilayer graphene and 2D heterostructures based devices.

cond-mat.mes-hall↗

arXiv2018

Flat Electronic Bands in Long Sequences of Rhombohedral-stacked Multilayer Graphene

The crystallographic stacking order in multilayer graphene plays an important role in determining its electronic properties. It has been predicted that a rhombohedral (ABC) stacking displays a conducting surface state with flat electronic dispersion. In such a flat band, the role of electron-electron correlation is enhanced possibly resulting in high Tc superconductivity, charge density wave or magnetic orders. Clean experimental band structure measurements of ABC stacked specimens are missing because the samples are usually too small in size. Here, we directly image the band structure of large multilayer graphene flake containing approximately 14 consecutive ABC layers. Angle-resolved photoemission spectroscopy experiments reveal the flat electronic bands near the K point extends by 0.13 Å-1 at the Fermi level at liquid nitrogen temperature. First-principle calculations identify the electronic ground state as an antiferromagnetic state with a band gap of about 40 meV.

cond-mat.mtrl-sci↗

arXiv2018

Electronic band structure of Two-Dimensional WS2/Graphene van der Waals Heterostructures

Combining single-layer two-dimensional semiconducting transition metal dichalcogenides (TMDs) with graphene layer in van der Waals heterostructures offers an intriguing means of controlling the electronic properties through these heterostructures. Here, we report the electronic and structural properties of transferred single layer WS2 on epitaxial graphene using micro-Raman spectroscopy, angle-resolved photoemission spectroscopy measurements (ARPES) and Density Functional Theory (DFT) calculations. The results show good electronic properties as well as well-defined band arising from the strong splitting of the single layer WS2 valence band at K points, with a maximum splitting of 0.44 eV. By comparing our DFT results with local and hybrid functionals, we find the top valence band of the experimental heterostructure is close to the calculations for suspended single layer WS2. . Our results provide an important reference for future studies of electronic properties of WS2 and its applications in valleytronic devices.

cond-mat.mtrl-sci↗

arXiv2018

Tunable Doping in Hydrogenated Single Layered Molybdenum Disulfide

Structural defects in the molybdenum disulfide (MoS2) monolayer are widely known for strongly altering its properties. Therefore, a deep understanding of these structural defects and how they affect MoS2 electronic properties is of fundamental importance. Here, we report on the incorporation of atomic hydrogen in mono-layered MoS2 to tune its structural defects. We demonstrate that the electronic properties of single layer MoS2 can be tuned from the intrinsic electron (n) to hole (p) doping via controlled exposure to atomic hydrogen at room temperature. Moreover, this hydrogenation process represents a viable technique to completely saturate the sulfur vacancies present in the MoS2 flakes. The successful incorporation of hydrogen in MoS2 leads to the modification of the electronic properties as evidenced by high resolution X-ray photoemission spectroscopy and density functional theory calculations. Micro-Raman spectroscopy and angle resolved photoemission spectroscopy measurements show the high quality of the hydrogenated MoS2 confirming the efficiency of our hydrogenation process. These results demonstrate that the MoS2 hydrogenation could be a significant and efficient way to achieve tunable doping of transition metal dichalcogenides (TMD) materials with non-TMD elements.

cond-mat.mtrl-sci↗

arXiv2018

Interface Dipole and Band Bending in Hybrid p-n Heterojunction MoS2/GaN(0001)

Hybrid heterostructures based on bulk GaN and two-dimensional (2D) materials offer novel paths toward nanoelectronic devices with engineered features. Here, we study the electronic properties of a mixed-dimensional heterostructure composed of intrinsic n-doped MoS2 flakes transferred on p-doped GaN(0001) layers. Based on angle-resolved photoemission spectroscopy (ARPES) and high resolution X-ray photoemission spectroscopy (HR-XPS), we investigate the electronic structure modification induced by the interlayer interactions in MoS2/GaN heterostructure. In particular, a shift of the valence band with respect to the Fermi level for MoS2/GaN heterostructure is observed; which is the signature of a charge transfer from the 2D monolayer MoS2 to GaN. ARPES and HR-XPS revealed an interface dipole associated with local charge transfer from the GaN layer to the MoS2 monolayer. Valence and conduction band offsets between MoS2 and GaN are determined to be 0.77 and -0.51 eV, respectively. Based on the measured work functions and band bendings, we establish the formation of an interface dipole between GaN and MoS2 of 0.2 eV.

cond-mat.mtrl-sci↗

arXiv2018

Intrinsic properties of suspended MoS2 on SiO2/Si pillar arrays for nanomechanics and optics

Semiconducting 2D materials, such as transition metal dichalcogenides (TMDs), are emerging in nanomechanics, optoelectronics, and thermal transport. In each of these fields, perfect control over 2D material properties including strain, doping, and heating is necessary, especially on the nanoscale. Here, we study clean devices consisting of membranes of single-layer MoS2 suspended on pillar arrays. Using Raman and photoluminescence spectroscopy, we have been able to extract, separate and simulate the different contributions on the nanoscale and to correlate these to the pillar array design. This control has been used to design a periodic MoS2 mechanical membrane with a high reproducibility and to perform optomechanical measurements on arrays of similar resonators with a high-quality factor of 600 at ambient temperature, hence opening the way to multi-resonator applications with 2D materials. At the same time, this study constitutes a reference for the future development of well-controlled optical emissions within 2D materials on periodic arrays with reproducible behavior. We measured a strong reduction of the MoS2 band-gap induced by the strain generated from the pillars. A transition from direct to indirect band gap was observed in isolated tent structures made of MoS2 and pinched by a pillar. In fully suspended devices, simulations were performed allowing both the extraction of the thermal conductance and doping of the layer. Using the correlation between the influences of strain and doping on the MoS2 Raman spectrum, we have developed a simple, elegant method to extract the local strain in suspended and non-suspended parts of a membrane. This opens the way to experimenting with tunable coupling between light emission and vibration.

cond-mat.mes-hall↗

arXiv2018

Nanostructures in suspended mono- and bilayer epitaxial graphene

Suspended graphene membrane presents a particular structure with fundamental interests and applications in nanomechanics, thermal transport and optoelectronics. Till now, the commonly used geometries are still quite simple and limited to the microscale. We propose here to overcome this problem by making nanostructures in suspended epitaxial bilayer graphene on a large scale and with a large variety of geometries. We also demonstrate a new hybrid thin film of SiC-graphene with an impressive robustness. Since the mechanics and thermal dissipation of a suspended graphene membrane are strongly related to its own geometry, we have in addition focused on thermal transport and strain engineering experiments. Micro-Raman spectroscopy mapping was successfully performed for various geometries with intrinsic properties measurements at the nanoscale. Our engineering of graphene geometry has permitted to reduce the thermal transport, release and modulate the strain in our structures.

cond-mat.mes-hall↗

arXiv2017

Tunable Quasiparticle Band Gap in Few Layer GaSe/graphene Van der Waals Heterostructures

Two-dimensional (2D) materials have recently been the focus of extensive research. By following a similar trend as graphene, other 2D materials including transition metal dichalcogenides (MX2) and metal mono-chalcogenides (MX) show great potential for ultrathin nanoelectronic and optoelectronic devices. Despite the weak nature of interlayer forces in semiconducting MX materials, their electronic properties are highly dependent on the number of layers. Using scanning tunneling microscopy and spectroscopy (STM/STS), we demonstrate the tunability of the quasiparticle energy gap of few layered gallium selenide (GaSe) directly grown on a bilayer graphene substrate by molecular beam epitaxy (MBE). Our results show that the band gap is about 3.50 +/-0.05 eV for single-tetralayer (1TL), 3.00 +/-0.05 eV for bi-tetralayer (2TL) and 2.30 +/-0.05 eV for tri-tetralayer (3TL). This band gap evolution of GaSe, in particularly the shift of the valence band with respect to the Fermi level, was confirmed by angle-resolved photoemission spectroscopy (ARPES) measurements and our theoretical calculations. Moreover, we observed a charge transfer in GaSe/graphene van der Waals (vdW) heterostructure using ARPES. These findings demonstrate the high impact on the GaSe electronic band structure and electronic properties that can be obtained by the control of 2D materials layer thickness and the graphene induced doping.

cond-mat.mtrl-sci↗