arXiv subjects

Zesong Fei

Publications and source records attributed to Zesong Fei.

At least 19 recordsLinked to original sources

arXiv2026

Probabilistic Symbol-Level Precoding based Affine Frequency Division Multiplexing Transmission

Affine frequency division multiplexing (AFDM) has recently gained significant attention due to its robustness against time-frequency doubly selective channel fading. However, the high computational complexity at the receiver poses a critical challenge for practical deployment. To overcome this issue, we propose a probabilistic symbol-level precoding (SLP)-based AFDM transmission framework, in which the processing burden in downlink transmission is shifted from the user to the base station (BS), enabling direct symbol detection without channel estimation or equalization at the receiver. In the proposed framework, the BS exploits the uplink channel state information (CSI) to design the downlink transmit waveform based on uplink-downlink channel reciprocity. In particular, we innovatively introduce a probabilistic SLP technology by explicitly characterizing the likelihood of symbol detection errors under noise perturbations. Specifically, the transmitted symbols are optimized to minimize the likelihood that the received symbols fall into erroneous decision regions, where the resulting error-probability minimization problem is subsequently approximated as a second order cone programming (SOCP) problem by exploiting the monotonicity of the objective function. Simulation results show that the proposed probabilistic SLP-based scheme achieves performance comparable to that of conventional AFDM receivers, whilst enjoying significant reduction of computational complexity at the receiver end. These results demonstrate the effectiveness and practical potential of the proposed approach.

eess.SP↗

arXiv2026

Integrated Sensing, Communication, and Computing in Multi-Tier Systems: Joint Hybrid Beamforming Design and Computation Resource Allocation

This paper proposes a novel integrated sensing, communication, and computing (ISCC) framework over a cloud-edge-device collaborative architecture, where passive sensing is enabled by reusing uplink offloading signals to extract sensing information directly at the edge without incurring additional transmission overhead. Nevertheless, such signal reuse introduces an inherent tradeoff between communication efficiency and sensing coverage. To address this challenge, we adopt a hybrid beamforming architecture under practical hardware constraints. In addition, the integration of sensing tasks creates significant resource contention at the mobile edge computing (MEC) server, where latency-sensitive device tasks and computation-intensive sensing inference tasks compete for limited processing capacity. To alleviate this computation burden, we introduce a split inference mechanism that strategically partitions intelligent sensing tasks between the edge and the cloud. Building upon this framework, we formulate a joint optimization problem to minimize the average computation latency of all device tasks subject to strict sensing performance constraints. To tackle the high non-convexity of the formulated problem, we develop an efficient alternating optimization algorithm. In particular, we design a two-layer framework to jointly determine the optimal DNN splitting point and computation resource allocation and employ a weighted minimum mean square error (WMMSE)-based approach with manifold optimization for hybrid beamforming design. Numerical results demonstrate that the proposed framework achieves a superior tradeoff between sensing accuracy and computation latency compared to the benchmark schemes.

eess.SP↗

arXiv2026

Evolving Intelligent Complex Systems via Intellicise Networks: Architecture, Technologies, and Pathways

Future engineering infrastructures are evolving into large-scale, open, heterogeneous, and wirelessly interconnected complex systems. These systems present significant challenges in optimizing network resource utilization, managing high-dimensional information spaces, and accommodating diverse business requirements. Intellicise networks, characterized by Intent-driven operation, semantic-native capability, and distributed intelligence, offer a promising paradigm for enabling such intelligent complex systems. We provide a systematic exploration of future intelligent complex systems from the perspective of intellicise networks. Specifically, we propose a cross-domain intelligent communication network architecture based on intellicise networks, grounded in information theory, systems theory, game theory, and cybernetics. The architecture comprises a cross-layer organizational framework, multi-functional planes, and novel information flows. The cross-layer framework defines the vertical evolution from perception and cognition to decision, while the control, user, data, computation, intelligence, and security planes deliver horizontal intellicise capabilities. Moreover, data, knowledge, model, and task flows interconnect the various layers and planes, forming a closed-loop process that derives simplicity from high-level intelligene while concurrently pursuing enhanced. Building on this architecture, we review key enabling technologies, tracing their evolution from semantic extraction to intent understanding, from heterogeneous resource integration to self-configuration and self-optimization, from generative artificial intelligence (AI) to agentic AI, and from embodied AI to symbodied AI. Additionally, we present a case study on intellicise networks for embodied agent communications and discuss representative applications and services for intelligent complex systems.

eess.SP↗

arXiv2026

Distributed MoE-based Uplink Detection for Cell-Free Communication Systems

Cell-free Massive multiple input and multiple output (MIMO) is recognized as a key technology for beyond-5G networks, where distributed access points (APs) jointly serve user equipments (UEs) to address the inherent inter-cell interference issue inherent in cellular systems. While conventional distributed signal detection methods offer a practical balance between performance and fronthaul load, they are fundamentally limited by linear processing constraints. In this paper, we propose a novel deep learning based uplink detection framework by introducing the distributed mixture of experts detection network (DMoE-DetNet). In this architecture, each AP acts as a local expert employing convolutional neural networks (CNNs) for non-linear feature extraction, and transmits the local minimum mean square error (MMSE) detection results and statistical channel information to the central processing unit (CPU). In the CPU, an attention-based encoder module captures complex spatio-temporal dependencies among users for global feature fusion, with a gating network at the central processor dynamically weighting the contributions from different APs. At last, a linear detector outputs the symbol probability. Simulation results demonstrate that the proposed DMoE-DetNet significantly outperforms conventional linear processing based cell-free signal detection methods in terms of symbol error rate, showcasing the potential of artificial intelligence-enabled communication systems.

eess.SP↗

arXiv2026

Towards Intelligent Low-Altitude Wireless Network Deployment: Differentiable Channel Knowledge Map Construction and Trajectory Design

Channel knowledge map (CKM) has emerged as a promising technique to leverage prior propagation knowledge in low-altitude wireless networks (LAWNs), yet state-of-the-art grid-based CKM construction methods struggle to support efficient LAWN deployment due to their lack of differentiability with respect to continuous locations of unmanned aerial vehicles (UAVs). To overcome this limitation, we propose a differentiable CKM-triggered trajectory optimization framework for LAWNs. Firstly, we propose a location-oriented CKM construction method that directly maps continuous spatial coordinates to channel gain. In particular, a shared convolutional neural network (CNN) is employed to encode high-level environmental features from conditional inputs. These features are then sampled based on location information to form a fused regressor-conditional multilayer perceptron (c-MLP) or conditional Kolmogorov-Arnold network (cKAN)-for channel gain prediction. We further propose a joint power, bandwidth, and trajectory optimization (JPBTO) method for multi-UAV systems, with the constructed differentiable CKM employed to evaluate the communication performance. The formulated non-convex problem is solved via alternating optimization and successive convex approximation. Numerical results show that the proposed framework enables location-aware differentiability of the CKM, while achieving higher accuracy than the methods without environmental features. Furthermore, the proposed CKM-JPBTO achieves a significantly higher minimum throughput than the conventional statistical channel model-based JPBTO.

eess.SP↗

arXiv2026

Toward Low-Altitude Embodied Intelligence: A Sensing-Communication-Computation-Control Closed-Loop Perspective

The rapid growth of the low-altitude economy drives increasingly autonomous unmanned aerial vehicle (UAV) operations, giving rise to low-altitude embodied intelligence (LAEI), in which sensing, communication, computation, and control (SC$^3$) are tightly integrated to enable closed-loop interaction, ensuring timely, effective, and safe responses in complex or unknown environments. This article systematically explores the LAEI networks, from its fundamental architecture to the diverse scenarios that it can support. We examine key enabling techniques that sustain timely information exchange and effective decision feedback within the $\text{SC}^3$ closed loop. A representative low-altitude UAV mission in an unknown urban area is presented as a case study, where the UAV provides communication services and performs environmental sensing to inform closed-loop control, illustrating how coordinated $\text{SC}^3$ capabilities enable efficient and responsive operation. By identifying major challenges and outlining future research directions, this work serves as a cornerstone for developing next-generation low-altitude intelligent systems.

eess.SY↗

arXiv2026

Towards Semantic-based Agent Communication Networks: Vision, Technologies, and Challenges

The International Telecommunication Union (ITU) identifies "Artificial Intelligence (AI) and Communication" as one of six key usage scenarios for 6G. Agentic AI, characterized by its ca-pabilities in multi-modal environmental sensing, complex task coordination, and continuous self-optimization, is anticipated to drive the evolution toward agent-based communication net-works. Semantic communication (SemCom), in turn, has emerged as a transformative paradigm that offers task-oriented efficiency, enhanced reliability in complex environments, and dynamic adaptation in resource allocation. However, comprehensive reviews that trace their technologi-cal evolution in the contexts of agent communications remain scarce. Addressing this gap, this paper systematically explores the role of semantics in agent communication networks. We first propose a novel architecture for semantic-based agent communication networks, structured into three layers, four entities, and four stages. Three wireless agent network layers define the logical structure and organization of entity interactions: the intention extraction and understanding layer, the semantic encoding and processing layer, and the distributed autonomy and collabora-tion layer. Across these layers, four AI agent entities, namely embodied agents, communication agents, network agents, and application agents, coexist and perform distinct tasks. Furthermore, four operational stages of semantic-enhanced agentic AI systems, namely perception, memory, reasoning, and action, form a cognitive cycle guiding agent behavior. Based on the proposed architecture, we provide a comprehensive review of the state-of-the-art on how semantics en-hance agent communication networks. Finally, we identify key challenges and present potential solutions to offer directional guidance for future research in this emerging field.

eess.SP↗

arXiv2026

Rateless DeepJSCC for Broadcast Channels: a Rate-Distortion-Complexity Tradeoff

In recent years, numerous data-intensive broadcasting applications have emerged at the wireless edge, calling for a flexible tradeoff between distortion, transmission rate, and processing complexity. While deep learning-based joint source-channel coding (DeepJSCC) has been identified as a potential solution to data-intensive communications, most of these schemes are confined to worst-case solutions, lack adaptive complexity, and are inefficient in broadcast settings. To overcome these limitations, this paper introduces nonlinear transform rateless source-channel coding (NTRSCC), a variable-length JSCC framework for broadcast channels based on rateless codes. In particular, we integrate learned source transformations with physical-layer LT codes, develop unequal protection schemes that exploit decoder side information, and devise approximations to enable end-to-end optimization of rateless parameters. Our framework enables heterogeneous receivers to adaptively adjust their received number of rateless symbols and decoding iterations in belief propagation, thereby achieving a controllable tradeoff between distortion, rate, and decoding complexity. Simulation results demonstrate that the proposed method enhances image broadcast quality under stringent communication and processing budgets over heterogeneous edge devices.

cs.IT↗

arXiv2026

BeamCKMDiff: Beam-Aware Channel Knowledge Map Construction via Diffusion Transformer

Channel knowledge map (CKM) is emerging as a critical enabler for environment-aware 6G networks, offering a site-specific database to significantly reduce pilot overhead. However, existing CKM construction methods typically rely on sparse sampling measurements and are restricted to either omnidirectional maps or discrete codebooks, hindering the exploitation of beamforming gain. To address these limitations, we propose BeamCKMDiff, a generative framework for constructing high-fidelity CKMs conditioned on arbitrary continuous beamforming vectors without site-specific sampling. Specifically, we incorporate a novel adaptive layer normalization (adaLN) mechanism into the noise prediction network of the Diffusion Transformer (DiT). This mechanism injects continuous beam embeddings as {global control parameters}, effectively steering the generative process to capture the complex coupling between beam patterns and environmental geometries. Simulation results demonstrate that BeamCKMDiff significantly outperforms state-of-the-art baselines, achieving superior reconstruction accuracy in capturing main lobes and side lobes.

eess.SP↗

arXiv2026

Doppler-Resilient LEO Satellite OFDM Transmission with Affine Frequency Domain Pilot

Orthogonal frequency division multiplexing (OFDM) based low Earth orbit (LEO) satellite communication system suffers from severe Doppler shifts, while {the Doppler-resilient affine frequency-division multiplexing (AFDM) transmission suffers from significantly high processing complexity in data detection}. In this paper, we explore the channel estimation gain of affine frequency (AF) domain pilot to enhance the OFDM transmission under high mobility. Specifically, we propose a novel AF domain pilot embedding scheme for satellite-ground downlink OFDM systems for capturing the channel characteristics. By exploiting the autoregressive (AR) property of adjacent channels, a long short-term memory (LSTM) based predictor is designed to replace conventional interpolation operation in OFDM channel estimation. Simulation results show that the proposed transmission scheme significantly outperforms conventional OFDM scheme in terms of bit error rate (BER) under high Doppler scenarios, thus paving a new way for the design of next generation non-terrestrial network (NTN) communication systems.

eess.SP↗

arXiv2025

TokCom-UEP: Semantic Importance-Matched Unequal Error Protection for Resilient Image Transmission

Based on the provided LaTeX code, here is the metadata for the submission form: Title: TokCom-UEP: Semantic Importance-Matched Unequal Error Protection for Resilient Image Transmission Author(s): Kaizheng Zhang, Zuolin Jin, Zhihang Cheng, Ming Zeng, Li Qiao, Zesong Fei Abstract: Token communication (TokCom), an emerging semantic communication framework powered by Large Multimodal Model (LMM), has become a key paradigm for resilient data transmission in 6G networks. A key limitation of existing TokCom designs lies in the assumption of uniform token importance, which leads to the adoption of equal error protection (EEP). However, compressed one-dimensional (1D) token sequences inherently exhibit heterogeneous semantic importance hierarchies, rendering EEP schemes suboptimal. To address this, this paper proposes TokCom-UEP, a novel semantic importance-matched unequal error protection (UEP) framework designed for resilient image transmission. TokCom-UEP integrates rateless UEP coding with the non-uniform semantic importance of tokens by partitioning source tokens into nested expanding windows, assigning higher selection probabilities to windows containing critical tokens to ensure their prioritized recovery. Simulation results demonstrate that TokCom-UEP outperforms EEP schemes in terms of three core semantic restoration metrics and spectral efficiency under low-overhead conditions.

eess.IV↗

arXiv2025

Trajectory Design for UAV-Based Low-Altitude Wireless Networks in Unknown Environments: A Digital Twin-Assisted TD3 Approach

Unmanned aerial vehicles (UAVs) are emerging as key enablers for low-altitude wireless network (LAWN), particularly when terrestrial networks are unavailable. In such scenarios, the environmental topology is typically unknown; hence, designing efficient and safe UAV trajectories is essential yet challenging. To address this, we propose a digital twin (DT)-assisted training and deployment framework. In this framework, the UAV transmits integrated sensing and communication signals to provide communication services to ground users, while simultaneously collecting echoes that are uploaded to the DT server to progressively construct virtual environments (VEs). These VEs accelerate model training and are continuously updated with real-time UAV sensing data during deployment, supporting decision-making and enhancing flight safety. Based on this framework, we further develop a trajectory design scheme that integrates simulated annealing for efficient user scheduling with the twin-delayed deep deterministic policy gradient algorithm for continuous trajectory design, aiming to minimize mission completion time while ensuring obstacle avoidance. Simulation results demonstrate that the proposed approach achieves faster convergence, higher flight safety, and shorter mission completion time compared with baseline methods, providing a robust and efficient solution for LAWN deployment in unknown environments.

eess.SP↗

arXiv2025

Towards Secure ISAC Beamforming: How Many Dedicated Sensing Beams Are Required?

In this paper, sensing-assisted secure communication in a multi-user multi-eavesdropper integrated sensing and communication (ISAC) system is investigated. Confidential communication signals and dedicated sensing signals are jointly transmitted by a base station (BS) to simultaneously serve users and sense aerial eavesdroppers (AEs). A sum rate maximization problem is formulated under AEs' Signal-to-Interference-plus-Noise Ratio (SINR) and sensing Signal-to-Clutter-plus-Noise Ratio (SCNR) constraints. A fractional-programming-based alternating optimization algorithm is developed to solve this problem for fully digital arrays, where successive convex approximation (SCA) and semidefinite relaxation (SDR) are leveraged to handle non-convex constraints. Furthermore, the minimum number of dedicated sensing beams is analyzed via a worst-case rank bound, upon which the proposed beamforming design is further extended to the hybrid analog-digital (HAD) array architecture, where the unit-modulus constraint is addressed by manifold optimization. Simulation results demonstrate that only a small number of sensing beams are sufficient for both sensing and jamming AEs, and the proposed designs consistently outperform strong baselines while also revealing the communication-sensing trade-off.

eess.SP↗

arXiv2025

Wireless Powered MEC Systems via Discrete Pinching Antennas: TDMA versus NOMA

Pinching antennas (PAs), a new type of reconfigurable and flexible antenna structures, have recently attracted significant research interest due to their ability to create line-of-sight links and mitigate large-scale path loss. Owing to their potential benefits, integrating PAs into wireless powered mobile edge computing (MEC) systems is regarded as a viable solution to enhance both energy transfer and task offloading efficiency. Unlike prior studies that assume ideal continuous PA placement along waveguides, this paper investigates a practical discrete PA-assisted wireless powered MEC framework, where devices first harvest energy from PA-emitted radio-frequency signals and then adopt a partial offloading mode, allocating part of the harvested energy to local computing and the remainder to uplink offloading. The uplink phase considers both the time-division multiple access (TDMA) and non-orthogonal multiple access (NOMA), each examined under three levels of PA activation flexibility. For each configuration, we formulate a joint optimization problem to maximize the total computational bits and conduct a theoretical performance comparison between the TDMA and NOMA schemes. To address the resulting mixed-integer nonlinear problems, we develop a two-layer algorithm that combines closed-form solutions based on Karush-Kuhn-Tucker (KKT) conditions with a cross-entropy-based learning method. Numerical results validate the superiority of the proposed design in terms of the harvested energy and computation performance, revealing that TDMA and NOMA achieve comparable performance under coarser PA activation levels, whereas finer activation granularity enables TDMA to achieve superior computation performance over NOMA.

eess.SP↗

arXiv2025

A Novel Symbol Level Precoding based AFDM Transmission Framework: Offloading Equalization Burden to Transmitter Side

Affine Frequency Division Multiplexing (AFDM) has attracted considerable attention for its robustness to Doppler effects. However, its high receiver-side computational complexity remains a major barrier to practical deployment. To address this, we propose a novel symbol-level precoding (SLP)-based AFDM transmission framework, which shifts the signal processing burden in downlink communications from user side to the base station (BS), enabling direct symbol detection without requiring channel estimation or equalization at the receiver. Specifically, in the uplink phase, we propose a Sparse Bayesian Learning (SBL) based channel estimation algorithm by exploiting the inherent sparsity of affine frequency (AF) domain channels. In particular, the sparse prior is modeled via a hierarchical Laplace distribution, and parameters are iteratively updated using the Expectation-Maximization (EM) algorithm. We also derive the Bayesian Cramer-Rao Bound (BCRB) to characterize the theoretical performance limit. In the downlink phase, the BS employs the SLP technology to design the transmitted waveform based on the estimated uplink channel state information (CSI) and channel reciprocity. The resulting optimization problem is formulated as a second-order cone programming (SOCP) problem, and its dual problem is investigated by Lagrangian function and Karush-Kuhn-Tucker conditions. Simulation results demonstrate that the proposed SBL estimator outperforms traditional orthogonal matching pursuit (OMP) in accuracy and robustness to off-grid effects, while the SLP-based waveform design scheme achieves performance comparable to conventional AFDM receivers while significantly reducing the computational complexity at receiver, validating the practicality of our approach.

eess.SP↗

arXiv2025

BS-1-to-N: Diffusion-Based Environment-Aware Cross-BS Channel Knowledge Map Generation for Cell-Free Networks

Channel knowledge map (CKM) inference across base stations (BSs) is the key to achieving efficient environmentaware communications. This paper proposes an environmentaware cross-BS CKM inference method called BS-1-to-N based on the generative diffusion model. To this end, we first design the BS location embedding (BSLE) method tailored for cross-BS CKM inference to embed BS location information in the feature vector of CKM. Further, we utilize the cross- and self-attention mechanism for the proposed BS-1-to-N model to respectively learn the relationships between source and target BSs, as well as that among target BSs. Therefore, given the locations of the source and target BSs, together with the source CKMs as control conditions, cross-BS CKM inference can be performed for an arbitrary number of source and target BSs. Specifically, in architectures with massive distributed nodes like cell-free networks, traditional methods of sequentially traversing each BS for CKM construction are prohibitively costly. By contrast, the proposed BS-1-to-N model is able to achieve efficient CKM inference for a target BS at any potential location based on the CKMs of source BSs. This is achieved by exploiting the fact that within a given area, different BSs share the same wireless environment that leads to their respective CKMs. Therefore, similar to multi-view synthesis, CKMs of different BSs are representations of the same wireless environment from different BS locations. By mining the implicit correlation between CKM and BS location based on the wireless environment, the proposed BS-1-to-N method achieves efficient CKM inference across BSs. We provide extensive comparisons of CKM inference between the proposed BS-1-to-N generative model versus benchmarking schemes, and provide one use case study to demonstrate its practical application for the optimization of BS deployment.

eess.SP↗

arXiv2025

Latency Minimization Oriented Radio and Computation Resource Allocations for 6G V2X Networks with ISCC

Incorporating mobile edge computing (MEC) and integrated sensing and communication (ISAC) has emerged as a promising technology to enable integrated sensing, communication, and computing (ISCC) in the sixth generation (6G) networks. ISCC is particularly attractive for vehicle-to-everything (V2X) applications, where vehicles perform ISAC to sense the environment and simultaneously offload the sensing data to roadside base stations (BSs) for remote processing. In this paper, we investigate a particular ISCC-enabled V2X system consisting of multiple multi-antenna BSs serving a set of single-antenna vehicles, in which the vehicles perform their respective ISAC operations (for simultaneous sensing and offloading to the associated BS) over orthogonal sub-bands. With the focus on fairly minimizing the sensing completion latency for vehicles while ensuring the detection probability constraints, we jointly optimize the allocations of radio resources (i.e., the sub-band allocation, transmit power control at vehicles, and receive beamforming at BSs) as well as computation resources at BS MEC servers. To solve the formulated complex mixed-integer nonlinear programming (MINLP) problem, we propose an alternating optimization algorithm. In this algorithm, we determine the sub-band allocation via the branch-and-bound method, optimize the transmit power control via successive convex approximation (SCA), and derive the receive beamforming and computation resource allocation at BSs in closed form based on generalized Rayleigh entropy and fairness criteria, respectively. Simulation results demonstrate that the proposed joint resource allocation design significantly reduces the maximum task completion latency among all vehicles. Furthermore, we also demonstrate several interesting trade-offs between the system performance and resource utilizations.

eess.SP↗

arXiv2025

Wireless Channel Identification via Conditional Diffusion Model

The identification of channel scenarios in wireless systems plays a crucial role in channel modeling, radio fingerprint positioning, and transceiver design. Traditional methods to classify channel scenarios are based on typical statistical characteristics of channels, such as K-factor, path loss, delay spread, etc. However, statistic-based channel identification methods cannot accurately differentiate implicit features induced by dynamic scatterers, thus performing very poorly in identifying similar channel scenarios. In this paper, we propose a novel channel scenario identification method, formulating the identification task as a maximum a posteriori (MAP) estimation. Furthermore, the MAP estimation is reformulated by a maximum likelihood estimation (MLE), which is then approximated and solved by the conditional generative diffusion model. Specifically, we leverage a transformer network to capture hidden channel features in multiple latent noise spaces within the reverse process of the conditional generative diffusion model. These detailed features, which directly affect likelihood functions in MLE, enable highly accurate scenario identification. Experimental results show that the proposed method outperforms traditional methods, including convolutional neural networks (CNNs), back-propagation neural networks (BPNNs), and random forest-based classifiers, improving the identification accuracy by more than 10%.

cs.LG↗