arXiv subjects

Zhanchi Wang

Publications and source records attributed to Zhanchi Wang.

8 recordsLinked to original sources

arXiv2026

A Unified Multi-Dynamics Framework for Perception-Oriented Modeling in Tendon-Driven Continuum Robots

Tendon-driven continuum robots offer intrinsically safe and contact-rich interactions owing to their kinematic redundancy and structural compliance. However, their perception often depends on external sensors, which increase hardware complexity and limit scalability. This work introduces a unified multi-dynamics modeling framework for tendon-driven continuum robotic systems, exemplified by a spiral-inspired robot named Spirob. The framework integrates motor electrical dynamics, motor-winch dynamics, and continuum robot dynamics into a coherent system model. Within this framework, motor signals such as current and angular displacement are modeled to expose the electromechanical signatures of external interactions, enabling perception grounded in intrinsic dynamics. The model captures and validates key physical behaviors of the real system, including actuation hysteresis and self-contact at motion limits. Building on this foundation, the framework is applied to environmental interaction: first for passive contact detection, verified experimentally against simulation data; then for active contact sensing, where control and perception strategies from simulation are successfully applied to the real robot; and finally for object size estimation, where a policy learned in simulation is directly deployed on hardware. The results demonstrate that the proposed framework provides a physically grounded way to interpret interaction signatures from intrinsic motor signals in tendon-driven continuum robots.

cs.RO↗

arXiv2026

Lightweight Learning from Actuation-Space Demonstrations via Flow Matching for Whole-Body Soft Robotic Grasping

Robotic grasping under uncertainty remains a fundamental challenge due to its uncertain and contact-rich nature. Traditional rigid robotic hands, with limited degrees of freedom and compliance, rely on complex model-based and heavy feedback controllers to manage such interactions. Soft robots, by contrast, exhibit embodied mechanical intelligence: their underactuated structures and passive flexibility of their whole body, naturally accommodate uncertain contacts and enable adaptive behaviors. To harness this capability, we propose a lightweight actuation-space learning framework that infers distributional control representations for whole-body soft robotic grasping, directly from deterministic demonstrations using a flow matching model (Rectified Flow),without requiring dense sensing or heavy control loops. Using only 30 demonstrations (less than 8% of the reachable workspace), the learned policy achieves a 97.5% grasp success rate across the whole workspace, generalizes to grasped-object size variations of +-33%, and maintains stable performance when the robot's dynamic response is directly adjusted by scaling the execution time from 20% to 200%. These results demonstrate that actuation-space learning, by leveraging its passive redundant DOFs and flexibility, converts the body's mechanics into functional control intelligence and substantially reduces the burden on central controllers for this uncertain-rich task.

cs.RO↗

arXiv2025

Grasping by Spiraling: Reproducing Elephant Movements with Rigid-Soft Robot Synergy

The logarithmic spiral is observed as a common pattern in several living beings across kingdoms and species. Some examples include fern shoots, prehensile tails, and soft limbs like octopus arms and elephant trunks. In the latter cases, spiraling is also used for grasping. Motivated by how this strategy simplifies behavior into kinematic primitives and combines them to develop smart grasping movements, this work focuses on the elephant trunk, which is more deeply investigated in the literature. We present a soft arm combined with a rigid robotic system to replicate elephant grasping capabilities based on the combination of a soft trunk with a solid body. In our system, the rigid arm ensures positioning and orientation, mimicking the role of the elephant's head, while the soft manipulator reproduces trunk motion primitives of bending and twisting under proper actuation patterns. This synergy replicates 9 distinct elephant grasping strategies reported in the literature, accommodating objects of varying shapes and sizes. The synergistic interaction between the rigid and soft components of the system minimizes the control complexity while maintaining a high degree of adaptability.

cs.RO↗

arXiv2024

SpiRobs: Logarithmic Spiral-shaped Robots for Versatile Grasping Across Scales

Realizing a soft manipulator with biologically comparable flexibility and versatility often requires careful selection of materials and actuation, as well as attentive design of its structure, perception, and control. Here, we report a new class of soft robots (SpiRobs) that morphologically replicates the logarithmic spiral pattern observed in natural appendages (e.g., octopus arms, elephant trunks, etc.). This allows for a common design principle across different scales and a speedy and inexpensive fabrication process. We further present a grasping strategy inspired by the octopus that can automatically adapt to a target object's size and shape. We illustrate the dexterity of SpiRobs and the ability to tightly grasp objects that vary in size by more than two orders of magnitude and up to 260 times self-weight. We demonstrate scalability via three additional variants: a miniaturized gripper (mm), a one-meter-long manipulator, and an array of SpiRobs that can tangle up various objects.

cs.RO↗

arXiv2022

Dynamical Modeling and Control of Soft Robots with Non-constant Curvature Deformation

The Piecewise Constant Curvature (PCC) model is the most widely used soft robotic modeling and control. However, the PCC fails to accurately describe the deformation of the soft robots when executing dynamic tasks or interacting with the environment. This paper presents a simple threedimensional (3D) modeling method for a multi-segment soft robotic manipulator with non-constant curvature deformation. We devise kinematic and dynamical models for soft manipulators by modeling each segment of the manipulator as two stretchable links connected by a universal joint. Based on that, we present two controllers for dynamic trajectory tracking in confguration space and pose control in task space, respectively. Model accuracy is demonstrated with simulations and experimental data. The controllers are implemented on a four-segment soft robotic manipulator and validated in dynamic motions and pose control with unknown loads. The experimental results show that the dynamic controller enables a stable reference trajectory tracking at speeds up to 7m/s.

cs.RO↗

arXiv2022

Unified Kinematic and Dynamical Modeling of a Soft Robotic Arm by a Piecewise Universal Joint Model

The compliance of soft robotic arms renders the development of accurate kinematic & dynamical models especially challenging. The most widely used model in soft robotic kinematics assumes Piecewise Constant Curvature (PCC). However, PCC fails to effectively handle external forces, or even the influence of gravity, since the robot does not deform with a constant curvature under these conditions. In this paper, we establish three-dimensional (3D) modeling of a multi-segment soft robotic arm under the less restrictive assumption that each segment of the arm is deformed on a plane without twisting. We devise a kinematic and dynamical model for the soft arm by deriving equivalence to a serial universal joint robot. Numerous experiments on the real robot platform along with simulations attest to the modeling accuracy of our approach in 3D motion with load. The maximum position/rotation error of the proposed model is verified 6.7x/4.6x lower than the PCC model considering gravity and external forces.

cs.RO↗

arXiv2022

Control of a Soft Robotic Arm Using a Piecewise Universal Joint Model

The 'infinite' passive degrees of freedom of soft robotic arms render their control especially challenging. In this paper, we leverage a previously developed model, which drawing equivalence of the soft arm to a series of universal joints, to design two closed-loop controllers: a configuration space controller for trajectory tracking and a task space controller for position control of the end effector. Extensive experiments and simulations on a four-segment soft arm attest to substantial improvement in terms of: a) superior tracking accuracy of the configuration space controller and b) reduced settling time and steady-state error of the task space controller. The task space controller is also verified to be effective in the presence of interactions between the soft arm and the environment.

cs.RO↗

arXiv2020

Design, Control, and Applications of a Soft Robotic Arm

This paper presents the design, control, and applications of a multi-segment soft robotic arm. In order to design a soft arm with large load capacity, several design principles are proposed by analyzing two kinds of buckling issues, under which we present a novel structure named Honeycomb Pneumatic Networks (HPN). Parameter optimization method, based on finite element method (FEM), is proposed to optimize HPN Arm design parameters. Through a quick fabrication process, several prototypes with different performance are made, one of which can achieve the transverse load capacity of 3 kg under 3 bar pressure. Next, considering different internal and external conditions, we develop three controllers according to different model precision. Specifically, based on accurate model, an open-loop controller is realized by combining piece-wise constant curvature (PCC) modeling method and machine learning method. Based on inaccurate model, a feedback controller, using estimated Jacobian, is realized in 3D space. A model-free controller, using reinforcement learning to learn a control policy rather than a model, is realized in 2D plane, with minimal training data. Then, these three control methods are compared on a same experiment platform to explore the applicability of different methods under different conditions. Lastly, we figure out that soft arm can greatly simplify the perception, planning, and control of interaction tasks through its compliance, which is its main advantage over the rigid arm. Through plentiful experiments in three interaction application scenarios, human-robot interaction, free space interaction task, and confined space interaction task, we demonstrate the potential application prospect of the soft arm.

cs.RO↗