Searcharxiv⌕ Search

arXiv subjects

Zhanzhao Li

Publications and source records attributed to Zhanzhao Li.

10 recordsLinked to original sources

Reaction mechanisms of sodium carbonate activation in ultra-high-volume slag-cement blends

Ultra-high-volume slag-cement (UHVS) blends can substantially reduce clinker ratio, but slow slag reaction limits strength development; Na2CO3 is a less caustic and lower-carbon activator for alkali-activated materials, yet its moderate alkalinity can similarly delay strength development. Here, dry-blended Na2CO3 (0-20 wt.% relative to water) was incorporated into a one-part binder with 90 wt.% ground-granulated blast-furnace slag and 10 wt.% Portland cement (PC) to determine whether this integration could mitigate slow strength development in both systems. Compressive strength testing, isothermal calorimetry, time-resolved quantitative X-ray diffraction, Fourier-transform infrared spectroscopy, aqueous solution analysis, and thermodynamic modeling were combined to determine how Na2CO3 controls phase assemblage, alkalinity, calculated porosity and strength development. At 5-10 wt.% Na2CO3, calcite-dominated carbonate reactions promoted a rapid alkalinity increase and accelerated early-age reaction and strength development; however, subsequent alkalinity decline limited later-age slag reaction and gel formation. In contrast, 20 wt.% Na2CO3 favored substantial early formation of gaylussite and carbonate-AFm phases, which moderated the initial pH rise and delayed early gel accumulation. The larger alkali inventory and evolving phase-solution partitioning helped sustain alkalinity at later ages, enabling continued slag dissolution and gel formation. This pathway produced higher reaction extent and lower calculated porosities, with compressive strength approaching that of neat PC. Screening-level cradle-to-gate life-cycle assessment indicates a 66-72% reduction in global warming potential relative to PC, depending on Na2CO3 production pathways. These results identify carbonate-mediated control of alkalinity persistence as key to sustaining slag reaction in UHVS systems.

physics.chem-ph↗

Large language model-enabled automated data extraction for concrete materials informatics

The promise of data-driven materials discovery remains constrained by the scarcity of large, high-quality, and accessible experimental datasets. Here, we introduce a generalizable large language model (LLM)-powered pipeline for automated extraction and structuring of materials data from unstructured scientific literature, using concrete materials as a representative and particularly challenging example. The pipeline exhibits robust performance across a broad range of LLMs and achieves an $F_1$ score of up to 0.98 for diverse composition--process--property attributes. Within one hour, it extracts nearly 9,000 high-quality records with over 100 attributes from a corpus screened from more than 27,000 publications, enabling the construction of the largest open laboratory database for blended cement concrete. Machine learning analyses underscore the importance of large, diverse, and information-rich datasets for enhancing both in-distribution accuracy and out-of-distribution generalization to unseen materials. The proposed pipeline is readily adaptable to other materials domains and accelerates the development of scalable data infrastructures for materials informatics.

cond-mat.mtrl-sci↗

Automating literature screening and knowledge synthesis with large language models

Scientific literature is expanding rapidly, yet much of its knowledge remains difficult to organize and reuse due to the substantial workload needed to navigate large, heterogeneous literature corpora. Here, we develop a generalizable large language model (LLM)-powered framework that automates literature screening, structured information extraction, and knowledge synthesis within a unified workflow. We benchmarked 11 state-of-the-art proprietary and open-weight LLMs across three materials science screening tasks differing in scope, corpus size, and class imbalance. Seven LLMs achieved balanced accuracies above 0.90 across all tasks, with the best-performing LLM reaching 0.96--0.98, demonstrating the potential of LLMs to accurately screen large, highly imbalanced scientific corpora. The framework also substantially reduces manual effort, screening 10,000 records within four minutes compared with approximately 83 person-hours for manual screening. Beyond literature screening, the framework extracts structured information from full-text articles, enabling content-level quantification of research landscapes that extends traditional bibliometric analysis based on publication metadata. This capability reveals methodological trends and underexplored directions, as shown for machine learning in concrete materials science. We further demonstrate its utility for information and data discovery by identifying publications containing silicate glass density data that are difficult to retrieve using conventional search strategies, which can support downstream hypothesis development, research design, and data-driven scientific discovery. Overall, these results demonstrate the broad applicability of LLM-powered literature analysis across scientific domains and its potential to transform large, unstructured literature corpora into structured, analyzable knowledge at scale.

cs.CL↗

Scalable Conformal MoSx Catalyst for Efficient Hydrogen Evolution at Industrial-Level Current Density in Alkaline Electrolyzers

The development of simple and scalable fabrication strategies for cost-effective electrodes is crucial to advance water splitting in alkaline water electrolyzers (AWEs). Here, we present a coating-annealing method to conformally coat a MoSx catalyst layer onto a porous Ni foam (NF) substrate. By controlling the annealing process, the composition of the MoSx layer could be tuned from MoS2 to MoS3 and its catalytic performance for hydrogen evolution reaction (HER) in alkaline media was optimized. The MoS3@NF synthesized by this method achieved industrially relevant HER current densities of 200 mA/cm2 at a low overpotential of 246 mV, maintaining stable operation for over 240 h. The MoS3@NF cathode, combined with a stainless steel anode, enabled an alkaline water electrolyzer (AWE) cell to operate steadily at 1.96 V and 1 A/cm2 for 1000 h. This performance surpasses that of most of the previously reported water electrolyzers employing MoSx-based cathodes. Our work demonstrates the potential of MoS3 (with its abundant edge-sulfur atoms serving as active sites) as a high-performance cathode material for industrial AWEs.

cond-mat.mtrl-sci↗

Reactivity-Informed Machine Learning for Performance Prediction and Design Space Exploration of Alkali-Activated Slag

Establishing quantitative relationships among mix design, raw material properties, curing conditions, and performance remains a long-standing challenge in cementitious materials, particularly for alkali-activated materials with variable precursor and activator chemistry. Here, we curated the largest literature-derived alkali-activated slag (AAS) dataset to date, comprising over 3100 compressive strength records, 155 chemically distinct ground granulated blast-furnace slags (GGBSs), and 24 attributes incorporating precursor chemistry, fineness, and reactivity. Multiple machine learning (ML) algorithms were benchmarked across progressively enriched feature scenarios, demonstrating that integrating GGBS compositions, fineness, curing conditions, and specimen geometry improves predictive performance. The average metal oxide dissociation energy (AMODE), a physically interpretable representation of precursor reactivity, provides a compact alternative descriptor to explicit oxide compositions while enabling comparable predictive performance. Model interpretation revealed physically consistent trends from heterogeneous data, including non-monotonic effects of Na2O dosage and silicate modulus, reduced predicted strength at higher water content and larger specimen size, and coupled oxide-level effects more coherently represented by AMODE than by individual oxide contents. Statistically constrained design space exploration reveals reactivity-dependent trade-offs among strength, embodied CO2 emissions, and cost. The design maps identify high-strength regions with substantially lower CO2 emissions than OPC-based references at similar cost. Overall, this work demonstrates how reactivity-informed ML can extract physically meaningful trends from heterogeneous AAS data and guide source-dependent binder design. The curated dataset is publicly accessible to support advances in cement and concrete research.

cond-mat.mtrl-sci↗

Exogenous Metal Cations in the Synthesis of CsPbBr3 Nanocrystals and their Interplay with Tertiary Amines

Current syntheses of CsPbBr3 halide perovskite nanocrystals (NCs) rely on over-stoichiometric amounts of Pb2+ precursors, resulting in unreacted lead ions at the end of the process. In our synthesis scheme of CsPbBr3 NCs we replaced excess Pb2+ with different exogenous metal cations (M) and investigated their effect on the synthesis products. These cations can be divided into two groups: group 1 delivers monodisperse CsPbBr3 cubes capped with oleate species (as for the case when Pb2+ is used in excess) and with photoluminescence quantum yield (PLQY) as high as 90% with some cations (for example with M= In3+); group 2 yields irregularly shaped CsPbBr3 NCs with broad size distributions. In both cases, the addition of a tertiary ammonium cation (didodecylmethyl ammonium, DDMA+) during the synthesis, after the nucleation of the NCs, reshapes the NCs to monodisperse truncated cubes. Such NCs feature a mixed oleate/DDMA+ surface termination with PLQY values up to 90%. For group 1 cations, this happens only if the ammonium cation is directly added as a salt (DDMA-Br) while for group 2 cations this happens even if the corresponding tertiary amine (DDMA) is added, instead of DDMA-Br. This is attributed to the fact that only group 2 cations can facilitate the protonation of DDMA by the excess oleic acid present in the reaction environment. In all cases studied, the incorporation of M cations is marginal and the reshaping of the NCs is only transient: if the reactions are run for a long time the truncated cubes evolve to cubes.

cond-mat.mtrl-sci↗

Core@Shell AgBr@CsPbBr3 Nanocrystals as Precursors to Hollow Lead Halide Perovskite Nanocubes

We report the synthesis of colloidal core@shell AgBr@CsPbBr3 nanocubes by a one-pot approach, where the nucleation and growth of AgBr nanocrystals occurs rapidly after the injection of chemical precursors. This is immediately followed by the overgrowth of CsPbBr3, delivering AgBr@CsPbBr3 nanocubes of several tens of nanometers in size, with the volume of the AgBr core being only a small fraction of the overall nanocrystal volume. The formation of a core@shell geometry is facilitated by the epitaxial compatibility between AgBr and CsPbBr3 along multiple crystallographic directions. Exchange with Cl-ions leads to Ag@CsPbCl3 nanocubes, whereas exchange with I-ions leads to hollow CsPbI3 nanocubes, due to selective etching of the AgBr (or Ag) core region by the I-ions diffusing in the nanocubes. These hollow CsPbI3 nanocubes can then be converted into hollow CsPbBr3 and CsPbCl3 nanocubes by halide exchange. The optical emission properties of the hollow CsPbX3 (X=Cl, Br, I) nanocubes are in line with those expected from large, non-hollow halide perovskite nanocrystals, indicating that the small hollow region in the cubes has no major influence on their optical properties.

cond-mat.mtrl-sci↗

Dissolution kinetics of iron sulfide minerals in alkaline solutions

Deleterious aggregate reactions induced by iron sulfide minerals, especially pyrrhotite and pyrite, have devastated concrete structures across many global regions. While these minerals have been extensively studied under acidic conditions, their behavior in alkaline environments, such as concrete, remains poorly understood. This study investigates the kinetics and mechanisms of iron sulfide dissolution at high pH (13$\unicode{x2013}$14). Results revealed that pyrrhotite dissolves orders of magnitude more rapidly than pyrite, with dissolution rates increasing with both pH and temperature. The type of alkali (potassium or sodium) in the solution was not found to affect the dissolution behavior. Kinetic modeling and experimental characterization indicated that the dissolution kinetics of pyrrhotite is controlled by a combination of chemical reactions (oxidation of iron and sulfur species) and diffusion (through an Fe(III)-(oxy)hydroxide layer). These findings provide practical insights into controlling dissolution and mitigating iron sulfide-induced damage in concrete.

cond-mat.mtrl-sci↗

Ultrafast Superradiant Scintillation from Weakly Confined CsPbBr3 Nanocrystals

Efficiency and emission rate are two traditionally conflicting parameters in radiation detection, and achieving their simultaneous maximization could significantly advance ultrafast time-of-flight (ToF) technologies. In this study, we demonstrate that this goal is attainable by harnessing the giant oscillator strength (GOS) inherent to weakly confined perovskite nanocrystals, which enables superradiant scintillation under mildly cryogenic conditions that align seamlessly with ToF technologies. We show that the radiative acceleration due to GOS encompasses both single and multiple exciton dynamics arising from ionizing interactions, further enhanced by suppressed non-radiative losses and Auger recombination at 80 K. The outcome is ultrafast scintillation with 420 ps lifetime and light yield of ~10'000 photons/MeV for diluted NC solutions, all without non-radiative losses. Temperature-dependent light-guiding experiments on test-bed nanocomposite scintillators finally indicate that the light-transport capability remains unaffected by the accumulation of band-edge oscillator strength due to GOS. These findings suggest a promising pathway toward developing ultrafast nanotech scintillators with optimized light output and timing performance.

physics.optics↗

Artificial Intelligence in Concrete Materials: A Scientometric View

Artificial intelligence (AI) has emerged as a transformative and versatile tool, breaking new frontiers across scientific domains. Among its most promising applications, AI research is blossoming in concrete science and engineering, where it has offered new insights towards mixture design optimization and service life prediction of cementitious systems. This chapter aims to uncover the main research interests and knowledge structure of the existing literature on AI for concrete materials. To begin with, a total of 389 journal articles published from 1990 to 2020 were retrieved from the Web of Science. Scientometric tools such as keyword co-occurrence analysis and documentation co-citation analysis were adopted to quantify features and characteristics of the research field. The findings bring to light pressing questions in data-driven concrete research and suggest future opportunities for the concrete community to fully utilize the capabilities of AI techniques.

cs.AI↗