arXiv subjects

Zhao Ge

Publications and source records attributed to Zhao Ge.

6 recordsLinked to original sources

arXiv2025

Real-Time Distributed Optical Fiber Vibration Recognition via Extreme Lightweight Model and Cross-Domain Distillation

Distributed optical fiber vibration sensing (DVS) systems offer a promising solution for large-scale monitoring and intrusion event recognition. However, their practical deployment remains hindered by two major challenges: degradation of recognition accuracy in dynamic conditions, and the computational bottleneck of real-time processing for mass sensing data. This paper presents a new solution to these challenges, through a FPGA-accelerated extreme lightweight model along with a newly proposed knowledge distillation framework. The proposed three-layer depthwise separable convolution network contains only 4141 parameters, which is the most compact architecture in this field to date, and achieves a maximum processing speed of 0.019 ms for each sample covering a 12.5 m fiber length over 0.256 s. This performance corresponds to real-time processing capabilities for sensing fibers extending up to 168.68 km. To improve generalizability under changing environments, the proposed cross-domain distillation framework guided by physical priors is used here to embed frequency-domain insights into the time-domain model. This allows for time-frequency representation learning without increasing complexity and boosts recognition accuracy from 51.93% to 95.72% under unseen environmental conditions. The proposed methodology provides key advancements including a framework combining interpretable signal processing technique with deep learning and a reference architecture for real-time processing and edge-computing in DVS systems, and more general distributed optical fiber sensing (DOFS) area. It mitigates the trade-off between sensing range and real-time capability, bridging the gap between theoretical capabilities and practical deployment requirements. Furthermore, this work reveals a new direction for building more efficient, robust and explainable artificial intelligence systems for DOFS technologies.

eess.SP↗

arXiv2025

Unsupervised super-spatial-resolution Brillouin frequency shift extraction based on physical enhanced spatial resolution neural network

Spatial resolution (SR), a core parameter of Brillouin optical time-domain analysis (BOTDA) sensors, determines the minimum fiber length over which physical perturbations can be accurately detected. However, the phonon lifetime in the fiber imposes an inherent limit on the SR, making sub-meter-level SR challenging in high-SR monitoring scenarios. Conventional SR enhancement approaches, constrained by hardware limitations, often involve complex systems, or increased measurement times. Although traditional deconvolution methods can mitigate hardware constraints, they suffer from distortion due to the nonlinear nature of the BOTDA response. Supervised deep learning approaches have recently emerged as an alternative, offering faster and more accurate post-processing through data-driven models. However, the need for extensive labeled data and the lack of physical priors lead to high computational costs and limited generalization. To overcome these challenges, we propose an unsupervised deep learning deconvolution framework, Physics-enhanced SR deep neural network (PSRN) guided by an approximate convolution model of the Brillouin gain spectrum (BGS).

physics.optics↗

arXiv2024

Real-time Event Recognition of Long-distance Distributed Vibration Sensing with Knowledge Distillation and Hardware Acceleration

Fiber-optic sensing, especially distributed optical fiber vibration (DVS) sensing, is gaining importance in internet of things (IoT) applications, such as industrial safety monitoring and intrusion detection. Despite their wide application, existing post-processing methods that rely on deep learning models for event recognition in DVS systems face challenges with real-time processing of large sample data volumes, particularly in long-distance applications. To address this issue, we propose to use a four-layer convolutional neural network (CNN) with ResNet as the teacher model for knowledge distillation. This results in a significant improvement in accuracy, from 83.41% to 95.39%, on data from previously untrained environments. Additionally, we propose a novel hardware design based on field-programmable gate arrays (FPGA) to further accelerate model inference. This design replaces multiplication with binary shift operations and quantizes model weights, enabling high parallelism and low latency. Our implementation achieves an inference time of 0.083 ms for a spatial-temporal sample covering a 12.5 m fiber length and 0.256 s time frame. This performance enables real-time signal processing over approximately 38.55 km of fiber, about $2.14\times$ the capability of an Nvidia GTX 4090 GPU. The proposed method greatly enhances the efficiency of vibration pattern recognition, promoting the use of DVS as a smart IoT system. The data and code are available at https://github.com/HUST-IOF/Efficient-DVS.

eess.SY↗

arXiv2024

Multimode fiber speckle Stokes polarimeter

The detection of the state of polarization (SOP) of light is essential for many optical applications. However, it is a challenge for cost-effective SOP measurement due to the complexity of conventional methods and poor transferability of new methods. Here, we propose a straightforward, low-cost and portable SOP measurement system based on the multimode fiber speckle. Convolutional neural network is utilized to establish the mapping relationship between speckle and Stokes parameters. The lowest root mean square error of the estimated SOP on Poincare sphere can be 0.0042. This method is distinguished by its low cost, clear structure and applicability to different wavelengths with high precision. The proposed method is of great value in polarization-related applications.

physics.optics↗

arXiv2023

Real-time FPGA Implementation of CNN-based Distributed Fiber Optic Vibration Event Recognition Method

Utilizing optical fibers to detect and pinpoint vibrations, Distributed Optical Fiber Vibration Sensing (DVS) technology provides real-time monitoring and surveillance of wide-reaching areas. This field has been leveraging Convolutional Neural Networks (CNN). Recently, a study has accomplished end-to-end vibration event recognition, enabling utilization of CNN-based DVS algorithms as real-time embedded system for edge computing in practical application situations. Considering the power consumption of central processing unit (CPU) and graphics processing unit (GPU), and the inflexibility of application-specific integrated circuit (ASIC), field-Programmable gate array (FPGA) is the optimal computing platform for the system. This paper proposes to compress pre-trained network and adopt a novel hardware structure, to design a fully on-chip, pipelined inference accelerator for CNN-based DVS algorithm, without fine tuning or re-training. This design allows for real-time processing with low power consumption and system requirement.An examination has been executed on an existing DVS algorithm based on a 40-layer CNN model comprising 2.7 million parameters. It is completely implemented on-chip, pipelined, with no reduction in accuracy.

eess.SP↗

arXiv2021

Enabling variable high spatial resolution retrieval from a long pulse BOTDA sensor

In the field of Internet of Things, there is an urgent need for sensors with large-scale sensing capability for scenarios such as intelligent monitoring of production lines and urban infrastructure. Brillouin optical time domain analysis (BOTDA) sensors, which can monitor thousands of continuous points simultaneously, show great advantages in these applications. We propose a convolutional neural network (CNN) to process the data of conventional Brillouin optical time domain analysis (BOTDA) sensors, which achieves unprecedented performance improvement that allows to directly retrieve higher spatial resolution (SR) from the sensing system that use long pump pulses. By using the simulated Brillouin gain spectrums (BGSs) as the CNN input and the corresponding high SR BFS as the output target, the trained CNN is able to obtain a SR higher than the theoretical value determined by the pump pulse width. In the experiment, the CNN accurately retrieves 0.5-m hotspots from the measured BGS with pump pulses from 20 to 50 ns, and the acquired BFS is in great agreement with 45/40 ns differential pulse-width pair (DPP) measurement results. Compared with the DPP technique, the proposed CNN demonstrates a 2-fold improvement in BFS uncertainty with only half the measurement time. In addition, by changing the training datasets, the proposed CNN can obtain tunable high SR retrieval based on conventional BOTDA sensors that use long pulses without any requirement of hardware modifications. The proposed data post-processing approach paves the way to enable novel high spatial resolution BOTDA sensors, which brings substantial improvement over the state-of-the-art techniques in terms of system complexity, measurement time and reliability, etc.

eess.SP↗