arXiv subjects

Zhen Tian

Publications and source records attributed to Zhen Tian.

101 records · Page 6Linked to original sources

arXiv2015

Multi-GPU implementation of a VMAT treatment plan optimization algorithm

VMAT optimization is a computationally challenging problem due to its large data size, high degrees of freedom, and many hardware constraints. High-performance graphics processing units have been used to speed up the computations. However, its small memory size cannot handle cases with a large dose-deposition coefficient (DDC) matrix. This paper is to report an implementation of our column-generation based VMAT algorithm on a multi-GPU platform to solve the memory limitation problem. The column-generation approach generates apertures sequentially by solving a pricing problem (PP) and a master problem (MP) iteratively. The DDC matrix is split into four sub-matrices according to beam angles, stored on four GPUs in compressed sparse row format. Computation of beamlet price is accomplished using multi-GPU. While the remaining steps of PP and MP problems are implemented on a single GPU due to their modest computational loads. A H&N patient case was used to validate our method. We compare our multi-GPU implementation with three single GPU implementation strategies: truncating DDC matrix (S1), repeatedly transferring DDC matrix between CPU and GPU (S2), and porting computations involving DDC matrix to CPU (S3). Two more H&N patient cases and three prostate cases were also used to demonstrate the advantages of our method. Our multi-GPU implementation can finish the optimization within ~1 minute for the H&N patient case. S1 leads to an inferior plan quality although its total time was 10 seconds shorter than the multi-GPU implementation. S2 and S3 yield same plan quality as the multi-GPU implementation but take ~4 minutes and ~6 minutes, respectively. High computational efficiency was consistently achieved for the other 5 cases. The results demonstrate that the multi-GPU implementation can handle the large-scale VMAT optimization problem efficiently without sacrificing plan quality.

physics.med-ph↗

arXiv2015

An OpenCL-based Monte Carlo dose calculation engine (oclMC) for coupled photon-electron transport

Monte Carlo (MC) method has been recognized the most accurate dose calculation method for radiotherapy. However, its extremely long computation time impedes clinical applications. Recently, a lot of efforts have been made to realize fast MC dose calculation on GPUs. Nonetheless, most of the GPU-based MC dose engines were developed in NVidia CUDA environment. This limits the code portability to other platforms, hindering the introduction of GPU-based MC simulations to clinical practice. The objective of this paper is to develop a fast cross-platform MC dose engine oclMC using OpenCL environment for external beam photon and electron radiotherapy in MeV energy range. Coupled photon-electron MC simulation was implemented with analogue simulations for photon transports and a Class II condensed history scheme for electron transports. To test the accuracy and efficiency of our dose engine oclMC, we compared dose calculation results of oclMC and gDPM, our previously developed GPU-based MC code, for a 15 MeV electron beam and a 6 MV photon beam on a homogenous water phantom, one slab phantom and one half-slab phantom. Satisfactory agreement was observed in all the cases. The average dose differences within 10% isodose line of the maximum dose were 0.48-0.53% for the electron beam cases and 0.15-0.17% for the photon beam cases. In terms of efficiency, our dose engine oclMC was 6-17% slower than gDPM when running both codes on the same NVidia TITAN card due to both different physics particle transport models and different computational environments between CUDA and OpenCL. The cross-platform portability was also validated by successfully running our new dose engine on a set of different compute devices including an Nvidia GPU card, two AMD GPU cards and an Intel CPU card using one or four cores. Computational efficiency among these platforms was compared.

physics.med-ph↗

arXiv2013

GPU-based Monte Carlo radiotherapy dose calculation using phase-space sources

A novel phase-space source implementation has been designed for GPU-based Monte Carlo dose calculation engines. Due to the parallelized nature of GPU hardware, it is essential to simultaneously transport particles of the same type and similar energies but separated spatially to yield a high efficiency. We present three methods for phase-space implementation that have been integrated into the most recent version of the GPU-based Monte Carlo radiotherapy dose calculation package gDPM v3.0. The first method is to sequentially read particles from a patient-dependent phase-space and sort them on-the-fly based on particle type and energy. The second method supplements this with a simple secondary collimator model and fluence map implementation so that patient-independent phase-space sources can be used. Finally, as the third method (called the phase-space-let, or PSL, method) we introduce a novel strategy to pre-process patient-independent phase-spaces and bin particles by type, energy and position. Position bins located outside a rectangular region of interest enclosing the treatment field are ignored, substantially decreasing simulation time. The three methods were validated in absolute dose against BEAMnrc/DOSXYZnrc and compared using gamma-index tests (2%/2mm above the 10% isodose). It was found that the PSL method has the optimal balance between accuracy and efficiency and thus is used as the default method in gDPM v3.0. Using the PSL method, open fields of 4x4, 10x10 and 30x30 cm2 in water resulted in gamma passing rates of 99.96%, 99.92% and 98.66%, respectively. Relative output factors agreed within 1%. An IMRT patient plan using the PSL method resulted in a passing rate of 97%, and was calculated in 50 seconds using a single GPU compared to 8.4 hours (per CPU) for BEAMnrc/DOSXYZnrc.

physics.med-ph↗

arXiv2013

The fixed-point iteration method for IMRT optimization with truncated dose deposition coefficient matrix

In the treatment plan optimization for intensity modulated radiation therapy (IMRT), dose-deposition coefficient (DDC) matrix is often pre-computed to parameterize the dose contribution to each voxel in the volume of interest from each beamlet of unit intensity. However, due to the limitation of computer memory and the requirement on computational efficiency, in practice matrix elements of small values are usually truncated, which inevitably compromises the quality of the resulting plan. A fixed-point iteration scheme has been applied in IMRT optimization to solve this problem, which has been reported to be effective and efficient based on the observations of the numerical experiments. In this paper, we aim to point out the mathematics behind this scheme and to answer the following three questions: 1) whether the fixed-point iteration algorithm converges or not? 2) when it converges, whether the fixed point solution is same as the original solution obtained with the complete DDC matrix? 3) if not the same, whether the fixed point solution is more accurate than the naive solution of the truncated problem obtained without the fixed-point iteration? To answer these questions, we first performed mathematical analysis and deductions using a simplified fluence map optimization (FMO) model. Then we conducted numerical experiments on a head-and-neck patient case using both the simplified and the original FMO model. Both our mathematical analysis and numerical experiments demonstrate that with proper DDC matrix truncation, the fixed-point iteration can converge. Even though the converged solution is not the one that we obtain with the complete DDC matrix, the fixed-point iteration scheme could significantly improve the plan accuracy compared with the solution to the truncated problem obtained without the fixed-point iteration.

physics.med-ph↗

arXiv2012

Four-dimensional Cone Beam CT Reconstruction and Enhancement using a Temporal Non-Local Means Method

Four-dimensional Cone Beam Computed Tomography (4D-CBCT) has been developed to provide respiratory phase resolved volumetric imaging in image guided radiation therapy (IGRT). Inadequate number of projections in each phase bin results in low quality 4D-CBCT images with obvious streaking artifacts. In this work, we propose two novel 4D-CBCT algorithms: an iterative reconstruction algorithm and an enhancement algorithm, utilizing a temporal nonlocal means (TNLM) method. We define a TNLM energy term for a given set of 4D-CBCT images. Minimization of this term favors those 4D-CBCT images such that any anatomical features at one spatial point at one phase can be found in a nearby spatial point at neighboring phases. 4D-CBCT reconstruction is achieved by minimizing a total energy containing a data fidelity term and the TNLM energy term. As for the image enhancement, 4D-CBCT images generated by the FDK algorithm are enhanced by minimizing the TNLM function while keeping the enhanced images close to the FDK results. A forward-backward splitting algorithm and a Gauss-Jacobi iteration method are employed to solve the problems. The algorithms are implemented on GPU to achieve a high computational efficiency. The reconstruction algorithm and the enhancement algorithm generate visually similar 4D-CBCT images, both better than the FDK results. Quantitative evaluations indicate that, compared with the FDK results, our reconstruction method improves contrast-to-noise-ratio (CNR) by a factor of 2.56~3.13 and our enhancement method increases the CNR by 2.75~3.33 times. The enhancement method also removes over 80% of the streak artifacts from the FDK results. The total computation time is ~460 sec for the reconstruction algorithm and ~610 sec for the enhancement algorithm on an NVIDIA Tesla C1060 GPU card.

physics.med-ph↗

arXiv2011

GPU-based Low Dose CT Reconstruction via Edge-preserving Total Variation Regularization

High radiation dose in CT scans increases a lifetime risk of cancer and has become a major clinical concern. Recently, iterative reconstruction algorithms with Total Variation (TV) regularization have been developed to reconstruct CT images from highly undersampled data acquired at low mAs levels in order to reduce the imaging dose. Nonetheless, TV regularization may lead to over-smoothed images and lost edge information. To solve this problem, in this work we develop an iterative CT reconstruction algorithm with edge-preserving TV regularization to reconstruct CT images from highly undersampled data obtained at low mAs levels. The CT image is reconstructed by minimizing an energy consisting of an edge-preserving TV norm and a data fidelity term posed by the x-ray projections. The edge-preserving TV term is proposed to preferentially perform smoothing only on non-edge part of the image in order to avoid over-smoothing, which is realized by introducing a penalty weight to the original total variation norm. Our iterative algorithm is implemented on GPU to improve its speed. We test our reconstruction algorithm on a digital NCAT phantom, a physical chest phantom, and a Catphan phantom. Reconstruction results from a conventional FBP algorithm and a TV regularization method without edge preserving penalty are also presented for comparison purpose. The experimental results illustrate that both TV-based algorithm and our edge-preserving TV algorithm outperform the conventional FBP algorithm in suppressing the streaking artifacts and image noise under the low dose context. Our edge-preserving algorithm is superior to the TV-based algorithm in that it can preserve more information of fine structures and therefore maintain acceptable spatial resolution.

physics.med-ph↗

arXiv2011

GPU-based Low-dose 4DCT Reconstruction via Temporal Non-local Means

Four-dimensional computed tomography (4DCT) has been widely used in cancer radiotherapy for accurate target delineation and motion measurement for tumors in thorax and upper abdomen areas. However, 4DCT simulation is associated with much higher imaging dose than conventional CT simulation, which is a major concern in its clinical application. Conventionally, each phase of 4DCT is reconstructed independently using the filtered backprojection (FBP) algorithm. The basic idea of our new algorithm is that, by utilizing the common information among different phases, the input information required to reconstruct image of high quality, and thus the imaging dose, can be reduced. We proposed a temporal non-local means (TNLM) method to explore the inter-phase similarity. All phases of the 4DCT images are reconstructed simultaneously by minimizing a cost function consisting of a data fidelity term and a TNLM regularization term. We utilized a forward-backward splitting algorithm and a Gauss-Jacobi iteration method to efficiently solve the minimization problem. The algorithm was also implemented on graphics processing unit (GPU) to achieve a high computational speed. Our reconstruction algorithm has been tested on a digital NCAT thorax phantom in three low dose scenarios. Our new algorithm generates visually much better CT images containing less image noise and streaking artifacts compared with the standard FBP algorithm. Quantitative analysis shows that much higher contrast-to-noise ratio and signal-to-noise ratio can be obtained using our algorithm. The total reconstruction time for all 10 phases of a slice ranges from 90 to 140 seconds on an NVIDIA Tesla C1060 GPU card.

physics.med-ph↗

arXiv2010

Terahertz superconducting plasmonic hole array

We demonstrate thermally tunable superconductor hole array with active control over their resonant transmission induced by surface plasmon polaritons . The array was lithographically fabricated on high temperature YBCO superconductor and characterized by terahertz-time domain spectroscopy. We observe a clear transition from the virtual excitation of the surface plasmon mode to the real surface plasmon mode. The highly tunable superconducting plasmonic hole arrays may have promising applications in the design of low-loss, large dynamic range amplitude modulation, and surface plasmon based terahertz devices.

physics.optics↗

arXiv2010

Superconductor terahertz metamaterial

We characterize the behaviour of split ring resonators made up of high-transition temperature YBCO superconductor using terahertz time domain spectroscopy. The superconductor metamaterial shows sharp change in the transmission spectrum at the fundamental inductive-capacitive resonance and the dipole resonance as the temperature dips below the transition temperature. Our results reveal that the high performance of such a metamaterial is limited by material imperfections and defects such as cracks, voids and secondary phases which play dominant role in partially impeding the flow of current causing dissipation of energy and electrical resistance to appear in the superconductor film.

physics.optics↗

arXiv2010

Cryogenic temperatures as a path towards high-Q terahertz metamaterials

Optical properties of planar thin film metamaterials were measured at room and liquid nitrogen temperatures using terahertz time-domain spectroscopy. The operation of metamaterials at cryogenic temperatures is anticipated to be a promising path towards low-loss metamaterials since nonradiative losses are strongly suppressed due to higher charge mobility. A 14% increase in the quality factor of the resonances was experimentally observed. It was limited by the high electron scattering rate due to defects in thin films. Supplementary simulations assuming metamaterials made of thick films reveal a temperature controlled behaviour and a 40% increase of the Q-factor at 10 K.

physics.optics↗

arXiv2009

Random terahertz metamaterials

Using terahertz time domain spectroscopy we investigate the normal incidence transmission through periodically and randomly arranged planar split ring resonators (SRRs). Introduction of positional disorder in metamaterials has no effect on the quality factor of the fundamental Inductive-Capacitive (LC) resonance. The dipole resonances undergo broadening and shift in their resonance frequencies. The experiment reveals that the randomly distributed SRR structures interact incoherently at LC resonance but couple coherently at the higher frequency dipole resonance.

physics.optics↗